Linux-libre 5.4.48-gnu
[librecmc/linux-libre.git] / drivers / net / wireless / zydas / zd1211rw / zd_mac.c
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /* ZD1211 USB-WLAN driver for Linux
3  *
4  * Copyright (C) 2005-2007 Ulrich Kunitz <kune@deine-taler.de>
5  * Copyright (C) 2006-2007 Daniel Drake <dsd@gentoo.org>
6  * Copyright (C) 2006-2007 Michael Wu <flamingice@sourmilk.net>
7  * Copyright (C) 2007-2008 Luis R. Rodriguez <mcgrof@winlab.rutgers.edu>
8  */
9
10 #include <linux/netdevice.h>
11 #include <linux/etherdevice.h>
12 #include <linux/slab.h>
13 #include <linux/usb.h>
14 #include <linux/jiffies.h>
15 #include <net/ieee80211_radiotap.h>
16
17 #include "zd_def.h"
18 #include "zd_chip.h"
19 #include "zd_mac.h"
20 #include "zd_rf.h"
21
22 struct zd_reg_alpha2_map {
23         u32 reg;
24         char alpha2[2];
25 };
26
27 static struct zd_reg_alpha2_map reg_alpha2_map[] = {
28         { ZD_REGDOMAIN_FCC, "US" },
29         { ZD_REGDOMAIN_IC, "CA" },
30         { ZD_REGDOMAIN_ETSI, "DE" }, /* Generic ETSI, use most restrictive */
31         { ZD_REGDOMAIN_JAPAN, "JP" },
32         { ZD_REGDOMAIN_JAPAN_2, "JP" },
33         { ZD_REGDOMAIN_JAPAN_3, "JP" },
34         { ZD_REGDOMAIN_SPAIN, "ES" },
35         { ZD_REGDOMAIN_FRANCE, "FR" },
36 };
37
38 /* This table contains the hardware specific values for the modulation rates. */
39 static const struct ieee80211_rate zd_rates[] = {
40         { .bitrate = 10,
41           .hw_value = ZD_CCK_RATE_1M, },
42         { .bitrate = 20,
43           .hw_value = ZD_CCK_RATE_2M,
44           .hw_value_short = ZD_CCK_RATE_2M | ZD_CCK_PREA_SHORT,
45           .flags = IEEE80211_RATE_SHORT_PREAMBLE },
46         { .bitrate = 55,
47           .hw_value = ZD_CCK_RATE_5_5M,
48           .hw_value_short = ZD_CCK_RATE_5_5M | ZD_CCK_PREA_SHORT,
49           .flags = IEEE80211_RATE_SHORT_PREAMBLE },
50         { .bitrate = 110,
51           .hw_value = ZD_CCK_RATE_11M,
52           .hw_value_short = ZD_CCK_RATE_11M | ZD_CCK_PREA_SHORT,
53           .flags = IEEE80211_RATE_SHORT_PREAMBLE },
54         { .bitrate = 60,
55           .hw_value = ZD_OFDM_RATE_6M,
56           .flags = 0 },
57         { .bitrate = 90,
58           .hw_value = ZD_OFDM_RATE_9M,
59           .flags = 0 },
60         { .bitrate = 120,
61           .hw_value = ZD_OFDM_RATE_12M,
62           .flags = 0 },
63         { .bitrate = 180,
64           .hw_value = ZD_OFDM_RATE_18M,
65           .flags = 0 },
66         { .bitrate = 240,
67           .hw_value = ZD_OFDM_RATE_24M,
68           .flags = 0 },
69         { .bitrate = 360,
70           .hw_value = ZD_OFDM_RATE_36M,
71           .flags = 0 },
72         { .bitrate = 480,
73           .hw_value = ZD_OFDM_RATE_48M,
74           .flags = 0 },
75         { .bitrate = 540,
76           .hw_value = ZD_OFDM_RATE_54M,
77           .flags = 0 },
78 };
79
80 /*
81  * Zydas retry rates table. Each line is listed in the same order as
82  * in zd_rates[] and contains all the rate used when a packet is sent
83  * starting with a given rates. Let's consider an example :
84  *
85  * "11 Mbits : 4, 3, 2, 1, 0" means :
86  * - packet is sent using 4 different rates
87  * - 1st rate is index 3 (ie 11 Mbits)
88  * - 2nd rate is index 2 (ie 5.5 Mbits)
89  * - 3rd rate is index 1 (ie 2 Mbits)
90  * - 4th rate is index 0 (ie 1 Mbits)
91  */
92
93 static const struct tx_retry_rate zd_retry_rates[] = {
94         { /*  1 Mbits */        1, { 0 }},
95         { /*  2 Mbits */        2, { 1,  0 }},
96         { /*  5.5 Mbits */      3, { 2,  1, 0 }},
97         { /* 11 Mbits */        4, { 3,  2, 1, 0 }},
98         { /*  6 Mbits */        5, { 4,  3, 2, 1, 0 }},
99         { /*  9 Mbits */        6, { 5,  4, 3, 2, 1, 0}},
100         { /* 12 Mbits */        5, { 6,  3, 2, 1, 0 }},
101         { /* 18 Mbits */        6, { 7,  6, 3, 2, 1, 0 }},
102         { /* 24 Mbits */        6, { 8,  6, 3, 2, 1, 0 }},
103         { /* 36 Mbits */        7, { 9,  8, 6, 3, 2, 1, 0 }},
104         { /* 48 Mbits */        8, {10,  9, 8, 6, 3, 2, 1, 0 }},
105         { /* 54 Mbits */        9, {11, 10, 9, 8, 6, 3, 2, 1, 0 }}
106 };
107
108 static const struct ieee80211_channel zd_channels[] = {
109         { .center_freq = 2412, .hw_value = 1 },
110         { .center_freq = 2417, .hw_value = 2 },
111         { .center_freq = 2422, .hw_value = 3 },
112         { .center_freq = 2427, .hw_value = 4 },
113         { .center_freq = 2432, .hw_value = 5 },
114         { .center_freq = 2437, .hw_value = 6 },
115         { .center_freq = 2442, .hw_value = 7 },
116         { .center_freq = 2447, .hw_value = 8 },
117         { .center_freq = 2452, .hw_value = 9 },
118         { .center_freq = 2457, .hw_value = 10 },
119         { .center_freq = 2462, .hw_value = 11 },
120         { .center_freq = 2467, .hw_value = 12 },
121         { .center_freq = 2472, .hw_value = 13 },
122         { .center_freq = 2484, .hw_value = 14 },
123 };
124
125 static void housekeeping_init(struct zd_mac *mac);
126 static void housekeeping_enable(struct zd_mac *mac);
127 static void housekeeping_disable(struct zd_mac *mac);
128 static void beacon_init(struct zd_mac *mac);
129 static void beacon_enable(struct zd_mac *mac);
130 static void beacon_disable(struct zd_mac *mac);
131 static void set_rts_cts(struct zd_mac *mac, unsigned int short_preamble);
132 static int zd_mac_config_beacon(struct ieee80211_hw *hw,
133                                 struct sk_buff *beacon, bool in_intr);
134
135 static int zd_reg2alpha2(u8 regdomain, char *alpha2)
136 {
137         unsigned int i;
138         struct zd_reg_alpha2_map *reg_map;
139         for (i = 0; i < ARRAY_SIZE(reg_alpha2_map); i++) {
140                 reg_map = &reg_alpha2_map[i];
141                 if (regdomain == reg_map->reg) {
142                         alpha2[0] = reg_map->alpha2[0];
143                         alpha2[1] = reg_map->alpha2[1];
144                         return 0;
145                 }
146         }
147         return 1;
148 }
149
150 static int zd_check_signal(struct ieee80211_hw *hw, int signal)
151 {
152         struct zd_mac *mac = zd_hw_mac(hw);
153
154         dev_dbg_f_cond(zd_mac_dev(mac), signal < 0 || signal > 100,
155                         "%s: signal value from device not in range 0..100, "
156                         "but %d.\n", __func__, signal);
157
158         if (signal < 0)
159                 signal = 0;
160         else if (signal > 100)
161                 signal = 100;
162
163         return signal;
164 }
165
166 int zd_mac_preinit_hw(struct ieee80211_hw *hw)
167 {
168         int r;
169         u8 addr[ETH_ALEN];
170         struct zd_mac *mac = zd_hw_mac(hw);
171
172         r = zd_chip_read_mac_addr_fw(&mac->chip, addr);
173         if (r)
174                 return r;
175
176         SET_IEEE80211_PERM_ADDR(hw, addr);
177
178         return 0;
179 }
180
181 int zd_mac_init_hw(struct ieee80211_hw *hw)
182 {
183         int r;
184         struct zd_mac *mac = zd_hw_mac(hw);
185         struct zd_chip *chip = &mac->chip;
186         char alpha2[2];
187         u8 default_regdomain;
188
189         r = zd_chip_enable_int(chip);
190         if (r)
191                 goto out;
192         r = zd_chip_init_hw(chip);
193         if (r)
194                 goto disable_int;
195
196         ZD_ASSERT(!irqs_disabled());
197
198         r = zd_read_regdomain(chip, &default_regdomain);
199         if (r)
200                 goto disable_int;
201         spin_lock_irq(&mac->lock);
202         mac->regdomain = mac->default_regdomain = default_regdomain;
203         spin_unlock_irq(&mac->lock);
204
205         /* We must inform the device that we are doing encryption/decryption in
206          * software at the moment. */
207         r = zd_set_encryption_type(chip, ENC_SNIFFER);
208         if (r)
209                 goto disable_int;
210
211         r = zd_reg2alpha2(mac->regdomain, alpha2);
212         if (r)
213                 goto disable_int;
214
215         r = regulatory_hint(hw->wiphy, alpha2);
216 disable_int:
217         zd_chip_disable_int(chip);
218 out:
219         return r;
220 }
221
222 void zd_mac_clear(struct zd_mac *mac)
223 {
224         flush_workqueue(zd_workqueue);
225         zd_chip_clear(&mac->chip);
226         ZD_MEMCLEAR(mac, sizeof(struct zd_mac));
227 }
228
229 static int set_rx_filter(struct zd_mac *mac)
230 {
231         unsigned long flags;
232         u32 filter = STA_RX_FILTER;
233
234         spin_lock_irqsave(&mac->lock, flags);
235         if (mac->pass_ctrl)
236                 filter |= RX_FILTER_CTRL;
237         spin_unlock_irqrestore(&mac->lock, flags);
238
239         return zd_iowrite32(&mac->chip, CR_RX_FILTER, filter);
240 }
241
242 static int set_mac_and_bssid(struct zd_mac *mac)
243 {
244         int r;
245
246         if (!mac->vif)
247                 return -1;
248
249         r = zd_write_mac_addr(&mac->chip, mac->vif->addr);
250         if (r)
251                 return r;
252
253         /* Vendor driver after setting MAC either sets BSSID for AP or
254          * filter for other modes.
255          */
256         if (mac->type != NL80211_IFTYPE_AP)
257                 return set_rx_filter(mac);
258         else
259                 return zd_write_bssid(&mac->chip, mac->vif->addr);
260 }
261
262 static int set_mc_hash(struct zd_mac *mac)
263 {
264         struct zd_mc_hash hash;
265         zd_mc_clear(&hash);
266         return zd_chip_set_multicast_hash(&mac->chip, &hash);
267 }
268
269 int zd_op_start(struct ieee80211_hw *hw)
270 {
271         struct zd_mac *mac = zd_hw_mac(hw);
272         struct zd_chip *chip = &mac->chip;
273         struct zd_usb *usb = &chip->usb;
274         int r;
275
276         if (!usb->initialized) {
277                 r = zd_usb_init_hw(usb);
278                 if (r)
279                         goto out;
280         }
281
282         r = zd_chip_enable_int(chip);
283         if (r < 0)
284                 goto out;
285
286         r = zd_chip_set_basic_rates(chip, CR_RATES_80211B | CR_RATES_80211G);
287         if (r < 0)
288                 goto disable_int;
289         r = set_rx_filter(mac);
290         if (r)
291                 goto disable_int;
292         r = set_mc_hash(mac);
293         if (r)
294                 goto disable_int;
295
296         /* Wait after setting the multicast hash table and powering on
297          * the radio otherwise interface bring up will fail. This matches
298          * what the vendor driver did.
299          */
300         msleep(10);
301
302         r = zd_chip_switch_radio_on(chip);
303         if (r < 0) {
304                 dev_err(zd_chip_dev(chip),
305                         "%s: failed to set radio on\n", __func__);
306                 goto disable_int;
307         }
308         r = zd_chip_enable_rxtx(chip);
309         if (r < 0)
310                 goto disable_radio;
311         r = zd_chip_enable_hwint(chip);
312         if (r < 0)
313                 goto disable_rxtx;
314
315         housekeeping_enable(mac);
316         beacon_enable(mac);
317         set_bit(ZD_DEVICE_RUNNING, &mac->flags);
318         return 0;
319 disable_rxtx:
320         zd_chip_disable_rxtx(chip);
321 disable_radio:
322         zd_chip_switch_radio_off(chip);
323 disable_int:
324         zd_chip_disable_int(chip);
325 out:
326         return r;
327 }
328
329 void zd_op_stop(struct ieee80211_hw *hw)
330 {
331         struct zd_mac *mac = zd_hw_mac(hw);
332         struct zd_chip *chip = &mac->chip;
333         struct sk_buff *skb;
334         struct sk_buff_head *ack_wait_queue = &mac->ack_wait_queue;
335
336         clear_bit(ZD_DEVICE_RUNNING, &mac->flags);
337
338         /* The order here deliberately is a little different from the open()
339          * method, since we need to make sure there is no opportunity for RX
340          * frames to be processed by mac80211 after we have stopped it.
341          */
342
343         zd_chip_disable_rxtx(chip);
344         beacon_disable(mac);
345         housekeeping_disable(mac);
346         flush_workqueue(zd_workqueue);
347
348         zd_chip_disable_hwint(chip);
349         zd_chip_switch_radio_off(chip);
350         zd_chip_disable_int(chip);
351
352
353         while ((skb = skb_dequeue(ack_wait_queue)))
354                 dev_kfree_skb_any(skb);
355 }
356
357 int zd_restore_settings(struct zd_mac *mac)
358 {
359         struct sk_buff *beacon;
360         struct zd_mc_hash multicast_hash;
361         unsigned int short_preamble;
362         int r, beacon_interval, beacon_period;
363         u8 channel;
364
365         dev_dbg_f(zd_mac_dev(mac), "\n");
366
367         spin_lock_irq(&mac->lock);
368         multicast_hash = mac->multicast_hash;
369         short_preamble = mac->short_preamble;
370         beacon_interval = mac->beacon.interval;
371         beacon_period = mac->beacon.period;
372         channel = mac->channel;
373         spin_unlock_irq(&mac->lock);
374
375         r = set_mac_and_bssid(mac);
376         if (r < 0) {
377                 dev_dbg_f(zd_mac_dev(mac), "set_mac_and_bssid failed, %d\n", r);
378                 return r;
379         }
380
381         r = zd_chip_set_channel(&mac->chip, channel);
382         if (r < 0) {
383                 dev_dbg_f(zd_mac_dev(mac), "zd_chip_set_channel failed, %d\n",
384                           r);
385                 return r;
386         }
387
388         set_rts_cts(mac, short_preamble);
389
390         r = zd_chip_set_multicast_hash(&mac->chip, &multicast_hash);
391         if (r < 0) {
392                 dev_dbg_f(zd_mac_dev(mac),
393                           "zd_chip_set_multicast_hash failed, %d\n", r);
394                 return r;
395         }
396
397         if (mac->type == NL80211_IFTYPE_MESH_POINT ||
398             mac->type == NL80211_IFTYPE_ADHOC ||
399             mac->type == NL80211_IFTYPE_AP) {
400                 if (mac->vif != NULL) {
401                         beacon = ieee80211_beacon_get(mac->hw, mac->vif);
402                         if (beacon)
403                                 zd_mac_config_beacon(mac->hw, beacon, false);
404                 }
405
406                 zd_set_beacon_interval(&mac->chip, beacon_interval,
407                                         beacon_period, mac->type);
408
409                 spin_lock_irq(&mac->lock);
410                 mac->beacon.last_update = jiffies;
411                 spin_unlock_irq(&mac->lock);
412         }
413
414         return 0;
415 }
416
417 /**
418  * zd_mac_tx_status - reports tx status of a packet if required
419  * @hw - a &struct ieee80211_hw pointer
420  * @skb - a sk-buffer
421  * @flags: extra flags to set in the TX status info
422  * @ackssi: ACK signal strength
423  * @success - True for successful transmission of the frame
424  *
425  * This information calls ieee80211_tx_status_irqsafe() if required by the
426  * control information. It copies the control information into the status
427  * information.
428  *
429  * If no status information has been requested, the skb is freed.
430  */
431 static void zd_mac_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb,
432                       int ackssi, struct tx_status *tx_status)
433 {
434         struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
435         int i;
436         int success = 1, retry = 1;
437         int first_idx;
438         const struct tx_retry_rate *retries;
439
440         ieee80211_tx_info_clear_status(info);
441
442         if (tx_status) {
443                 success = !tx_status->failure;
444                 retry = tx_status->retry + success;
445         }
446
447         if (success) {
448                 /* success */
449                 info->flags |= IEEE80211_TX_STAT_ACK;
450         } else {
451                 /* failure */
452                 info->flags &= ~IEEE80211_TX_STAT_ACK;
453         }
454
455         first_idx = info->status.rates[0].idx;
456         ZD_ASSERT(0<=first_idx && first_idx<ARRAY_SIZE(zd_retry_rates));
457         retries = &zd_retry_rates[first_idx];
458         ZD_ASSERT(1 <= retry && retry <= retries->count);
459
460         info->status.rates[0].idx = retries->rate[0];
461         info->status.rates[0].count = 1; // (retry > 1 ? 2 : 1);
462
463         for (i=1; i<IEEE80211_TX_MAX_RATES-1 && i<retry; i++) {
464                 info->status.rates[i].idx = retries->rate[i];
465                 info->status.rates[i].count = 1; // ((i==retry-1) && success ? 1:2);
466         }
467         for (; i<IEEE80211_TX_MAX_RATES && i<retry; i++) {
468                 info->status.rates[i].idx = retries->rate[retry - 1];
469                 info->status.rates[i].count = 1; // (success ? 1:2);
470         }
471         if (i<IEEE80211_TX_MAX_RATES)
472                 info->status.rates[i].idx = -1; /* terminate */
473
474         info->status.ack_signal = zd_check_signal(hw, ackssi);
475         ieee80211_tx_status_irqsafe(hw, skb);
476 }
477
478 /**
479  * zd_mac_tx_failed - callback for failed frames
480  * @dev: the mac80211 wireless device
481  *
482  * This function is called if a frame couldn't be successfully
483  * transferred. The first frame from the tx queue, will be selected and
484  * reported as error to the upper layers.
485  */
486 void zd_mac_tx_failed(struct urb *urb)
487 {
488         struct ieee80211_hw * hw = zd_usb_to_hw(urb->context);
489         struct zd_mac *mac = zd_hw_mac(hw);
490         struct sk_buff_head *q = &mac->ack_wait_queue;
491         struct sk_buff *skb;
492         struct tx_status *tx_status = (struct tx_status *)urb->transfer_buffer;
493         unsigned long flags;
494         int success = !tx_status->failure;
495         int retry = tx_status->retry + success;
496         int found = 0;
497         int i, position = 0;
498
499         spin_lock_irqsave(&q->lock, flags);
500
501         skb_queue_walk(q, skb) {
502                 struct ieee80211_hdr *tx_hdr;
503                 struct ieee80211_tx_info *info;
504                 int first_idx, final_idx;
505                 const struct tx_retry_rate *retries;
506                 u8 final_rate;
507
508                 position ++;
509
510                 /* if the hardware reports a failure and we had a 802.11 ACK
511                  * pending, then we skip the first skb when searching for a
512                  * matching frame */
513                 if (tx_status->failure && mac->ack_pending &&
514                     skb_queue_is_first(q, skb)) {
515                         continue;
516                 }
517
518                 tx_hdr = (struct ieee80211_hdr *)skb->data;
519
520                 /* we skip all frames not matching the reported destination */
521                 if (unlikely(!ether_addr_equal(tx_hdr->addr1, tx_status->mac)))
522                         continue;
523
524                 /* we skip all frames not matching the reported final rate */
525
526                 info = IEEE80211_SKB_CB(skb);
527                 first_idx = info->status.rates[0].idx;
528                 ZD_ASSERT(0<=first_idx && first_idx<ARRAY_SIZE(zd_retry_rates));
529                 retries = &zd_retry_rates[first_idx];
530                 if (retry <= 0 || retry > retries->count)
531                         continue;
532
533                 final_idx = retries->rate[retry - 1];
534                 final_rate = zd_rates[final_idx].hw_value;
535
536                 if (final_rate != tx_status->rate) {
537                         continue;
538                 }
539
540                 found = 1;
541                 break;
542         }
543
544         if (found) {
545                 for (i=1; i<=position; i++) {
546                         skb = __skb_dequeue(q);
547                         zd_mac_tx_status(hw, skb,
548                                          mac->ack_pending ? mac->ack_signal : 0,
549                                          i == position ? tx_status : NULL);
550                         mac->ack_pending = 0;
551                 }
552         }
553
554         spin_unlock_irqrestore(&q->lock, flags);
555 }
556
557 /**
558  * zd_mac_tx_to_dev - callback for USB layer
559  * @skb: a &sk_buff pointer
560  * @error: error value, 0 if transmission successful
561  *
562  * Informs the MAC layer that the frame has successfully transferred to the
563  * device. If an ACK is required and the transfer to the device has been
564  * successful, the packets are put on the @ack_wait_queue with
565  * the control set removed.
566  */
567 void zd_mac_tx_to_dev(struct sk_buff *skb, int error)
568 {
569         struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
570         struct ieee80211_hw *hw = info->rate_driver_data[0];
571         struct zd_mac *mac = zd_hw_mac(hw);
572
573         ieee80211_tx_info_clear_status(info);
574
575         skb_pull(skb, sizeof(struct zd_ctrlset));
576         if (unlikely(error ||
577             (info->flags & IEEE80211_TX_CTL_NO_ACK))) {
578                 /*
579                  * FIXME : do we need to fill in anything ?
580                  */
581                 ieee80211_tx_status_irqsafe(hw, skb);
582         } else {
583                 struct sk_buff_head *q = &mac->ack_wait_queue;
584
585                 skb_queue_tail(q, skb);
586                 while (skb_queue_len(q) > ZD_MAC_MAX_ACK_WAITERS) {
587                         zd_mac_tx_status(hw, skb_dequeue(q),
588                                          mac->ack_pending ? mac->ack_signal : 0,
589                                          NULL);
590                         mac->ack_pending = 0;
591                 }
592         }
593 }
594
595 static int zd_calc_tx_length_us(u8 *service, u8 zd_rate, u16 tx_length)
596 {
597         /* ZD_PURE_RATE() must be used to remove the modulation type flag of
598          * the zd-rate values.
599          */
600         static const u8 rate_divisor[] = {
601                 [ZD_PURE_RATE(ZD_CCK_RATE_1M)]   =  1,
602                 [ZD_PURE_RATE(ZD_CCK_RATE_2M)]   =  2,
603                 /* Bits must be doubled. */
604                 [ZD_PURE_RATE(ZD_CCK_RATE_5_5M)] = 11,
605                 [ZD_PURE_RATE(ZD_CCK_RATE_11M)]  = 11,
606                 [ZD_PURE_RATE(ZD_OFDM_RATE_6M)]  =  6,
607                 [ZD_PURE_RATE(ZD_OFDM_RATE_9M)]  =  9,
608                 [ZD_PURE_RATE(ZD_OFDM_RATE_12M)] = 12,
609                 [ZD_PURE_RATE(ZD_OFDM_RATE_18M)] = 18,
610                 [ZD_PURE_RATE(ZD_OFDM_RATE_24M)] = 24,
611                 [ZD_PURE_RATE(ZD_OFDM_RATE_36M)] = 36,
612                 [ZD_PURE_RATE(ZD_OFDM_RATE_48M)] = 48,
613                 [ZD_PURE_RATE(ZD_OFDM_RATE_54M)] = 54,
614         };
615
616         u32 bits = (u32)tx_length * 8;
617         u32 divisor;
618
619         divisor = rate_divisor[ZD_PURE_RATE(zd_rate)];
620         if (divisor == 0)
621                 return -EINVAL;
622
623         switch (zd_rate) {
624         case ZD_CCK_RATE_5_5M:
625                 bits = (2*bits) + 10; /* round up to the next integer */
626                 break;
627         case ZD_CCK_RATE_11M:
628                 if (service) {
629                         u32 t = bits % 11;
630                         *service &= ~ZD_PLCP_SERVICE_LENGTH_EXTENSION;
631                         if (0 < t && t <= 3) {
632                                 *service |= ZD_PLCP_SERVICE_LENGTH_EXTENSION;
633                         }
634                 }
635                 bits += 10; /* round up to the next integer */
636                 break;
637         }
638
639         return bits/divisor;
640 }
641
642 static void cs_set_control(struct zd_mac *mac, struct zd_ctrlset *cs,
643                            struct ieee80211_hdr *header,
644                            struct ieee80211_tx_info *info)
645 {
646         /*
647          * CONTROL TODO:
648          * - if backoff needed, enable bit 0
649          * - if burst (backoff not needed) disable bit 0
650          */
651
652         cs->control = 0;
653
654         /* First fragment */
655         if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
656                 cs->control |= ZD_CS_NEED_RANDOM_BACKOFF;
657
658         /* No ACK expected (multicast, etc.) */
659         if (info->flags & IEEE80211_TX_CTL_NO_ACK)
660                 cs->control |= ZD_CS_NO_ACK;
661
662         /* PS-POLL */
663         if (ieee80211_is_pspoll(header->frame_control))
664                 cs->control |= ZD_CS_PS_POLL_FRAME;
665
666         if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS)
667                 cs->control |= ZD_CS_RTS;
668
669         if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT)
670                 cs->control |= ZD_CS_SELF_CTS;
671
672         /* FIXME: Management frame? */
673 }
674
675 static bool zd_mac_match_cur_beacon(struct zd_mac *mac, struct sk_buff *beacon)
676 {
677         if (!mac->beacon.cur_beacon)
678                 return false;
679
680         if (mac->beacon.cur_beacon->len != beacon->len)
681                 return false;
682
683         return !memcmp(beacon->data, mac->beacon.cur_beacon->data, beacon->len);
684 }
685
686 static void zd_mac_free_cur_beacon_locked(struct zd_mac *mac)
687 {
688         ZD_ASSERT(mutex_is_locked(&mac->chip.mutex));
689
690         kfree_skb(mac->beacon.cur_beacon);
691         mac->beacon.cur_beacon = NULL;
692 }
693
694 static void zd_mac_free_cur_beacon(struct zd_mac *mac)
695 {
696         mutex_lock(&mac->chip.mutex);
697         zd_mac_free_cur_beacon_locked(mac);
698         mutex_unlock(&mac->chip.mutex);
699 }
700
701 static int zd_mac_config_beacon(struct ieee80211_hw *hw, struct sk_buff *beacon,
702                                 bool in_intr)
703 {
704         struct zd_mac *mac = zd_hw_mac(hw);
705         int r, ret, num_cmds, req_pos = 0;
706         u32 tmp, j = 0;
707         /* 4 more bytes for tail CRC */
708         u32 full_len = beacon->len + 4;
709         unsigned long end_jiffies, message_jiffies;
710         struct zd_ioreq32 *ioreqs;
711
712         mutex_lock(&mac->chip.mutex);
713
714         /* Check if hw already has this beacon. */
715         if (zd_mac_match_cur_beacon(mac, beacon)) {
716                 r = 0;
717                 goto out_nofree;
718         }
719
720         /* Alloc memory for full beacon write at once. */
721         num_cmds = 1 + zd_chip_is_zd1211b(&mac->chip) + full_len;
722         ioreqs = kmalloc_array(num_cmds, sizeof(struct zd_ioreq32),
723                                GFP_KERNEL);
724         if (!ioreqs) {
725                 r = -ENOMEM;
726                 goto out_nofree;
727         }
728
729         r = zd_iowrite32_locked(&mac->chip, 0, CR_BCN_FIFO_SEMAPHORE);
730         if (r < 0)
731                 goto out;
732         r = zd_ioread32_locked(&mac->chip, &tmp, CR_BCN_FIFO_SEMAPHORE);
733         if (r < 0)
734                 goto release_sema;
735         if (in_intr && tmp & 0x2) {
736                 r = -EBUSY;
737                 goto release_sema;
738         }
739
740         end_jiffies = jiffies + HZ / 2; /*~500ms*/
741         message_jiffies = jiffies + HZ / 10; /*~100ms*/
742         while (tmp & 0x2) {
743                 r = zd_ioread32_locked(&mac->chip, &tmp, CR_BCN_FIFO_SEMAPHORE);
744                 if (r < 0)
745                         goto release_sema;
746                 if (time_is_before_eq_jiffies(message_jiffies)) {
747                         message_jiffies = jiffies + HZ / 10;
748                         dev_err(zd_mac_dev(mac),
749                                         "CR_BCN_FIFO_SEMAPHORE not ready\n");
750                         if (time_is_before_eq_jiffies(end_jiffies))  {
751                                 dev_err(zd_mac_dev(mac),
752                                                 "Giving up beacon config.\n");
753                                 r = -ETIMEDOUT;
754                                 goto reset_device;
755                         }
756                 }
757                 msleep(20);
758         }
759
760         ioreqs[req_pos].addr = CR_BCN_FIFO;
761         ioreqs[req_pos].value = full_len - 1;
762         req_pos++;
763         if (zd_chip_is_zd1211b(&mac->chip)) {
764                 ioreqs[req_pos].addr = CR_BCN_LENGTH;
765                 ioreqs[req_pos].value = full_len - 1;
766                 req_pos++;
767         }
768
769         for (j = 0 ; j < beacon->len; j++) {
770                 ioreqs[req_pos].addr = CR_BCN_FIFO;
771                 ioreqs[req_pos].value = *((u8 *)(beacon->data + j));
772                 req_pos++;
773         }
774
775         for (j = 0; j < 4; j++) {
776                 ioreqs[req_pos].addr = CR_BCN_FIFO;
777                 ioreqs[req_pos].value = 0x0;
778                 req_pos++;
779         }
780
781         BUG_ON(req_pos != num_cmds);
782
783         r = zd_iowrite32a_locked(&mac->chip, ioreqs, num_cmds);
784
785 release_sema:
786         /*
787          * Try very hard to release device beacon semaphore, as otherwise
788          * device/driver can be left in unusable state.
789          */
790         end_jiffies = jiffies + HZ / 2; /*~500ms*/
791         ret = zd_iowrite32_locked(&mac->chip, 1, CR_BCN_FIFO_SEMAPHORE);
792         while (ret < 0) {
793                 if (in_intr || time_is_before_eq_jiffies(end_jiffies)) {
794                         ret = -ETIMEDOUT;
795                         break;
796                 }
797
798                 msleep(20);
799                 ret = zd_iowrite32_locked(&mac->chip, 1, CR_BCN_FIFO_SEMAPHORE);
800         }
801
802         if (ret < 0)
803                 dev_err(zd_mac_dev(mac), "Could not release "
804                                          "CR_BCN_FIFO_SEMAPHORE!\n");
805         if (r < 0 || ret < 0) {
806                 if (r >= 0)
807                         r = ret;
808
809                 /* We don't know if beacon was written successfully or not,
810                  * so clear current. */
811                 zd_mac_free_cur_beacon_locked(mac);
812
813                 goto out;
814         }
815
816         /* Beacon has now been written successfully, update current. */
817         zd_mac_free_cur_beacon_locked(mac);
818         mac->beacon.cur_beacon = beacon;
819         beacon = NULL;
820
821         /* 802.11b/g 2.4G CCK 1Mb
822          * 802.11a, not yet implemented, uses different values (see GPL vendor
823          * driver)
824          */
825         r = zd_iowrite32_locked(&mac->chip, 0x00000400 | (full_len << 19),
826                                 CR_BCN_PLCP_CFG);
827 out:
828         kfree(ioreqs);
829 out_nofree:
830         kfree_skb(beacon);
831         mutex_unlock(&mac->chip.mutex);
832
833         return r;
834
835 reset_device:
836         zd_mac_free_cur_beacon_locked(mac);
837         kfree_skb(beacon);
838
839         mutex_unlock(&mac->chip.mutex);
840         kfree(ioreqs);
841
842         /* semaphore stuck, reset device to avoid fw freeze later */
843         dev_warn(zd_mac_dev(mac), "CR_BCN_FIFO_SEMAPHORE stuck, "
844                                   "resetting device...");
845         usb_queue_reset_device(mac->chip.usb.intf);
846
847         return r;
848 }
849
850 static int fill_ctrlset(struct zd_mac *mac,
851                         struct sk_buff *skb)
852 {
853         int r;
854         struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
855         unsigned int frag_len = skb->len + FCS_LEN;
856         unsigned int packet_length;
857         struct ieee80211_rate *txrate;
858         struct zd_ctrlset *cs = skb_push(skb, sizeof(struct zd_ctrlset));
859         struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
860
861         ZD_ASSERT(frag_len <= 0xffff);
862
863         /*
864          * Firmware computes the duration itself (for all frames except PSPoll)
865          * and needs the field set to 0 at input, otherwise firmware messes up
866          * duration_id and sets bits 14 and 15 on.
867          */
868         if (!ieee80211_is_pspoll(hdr->frame_control))
869                 hdr->duration_id = 0;
870
871         txrate = ieee80211_get_tx_rate(mac->hw, info);
872
873         cs->modulation = txrate->hw_value;
874         if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
875                 cs->modulation = txrate->hw_value_short;
876
877         cs->tx_length = cpu_to_le16(frag_len);
878
879         cs_set_control(mac, cs, hdr, info);
880
881         packet_length = frag_len + sizeof(struct zd_ctrlset) + 10;
882         ZD_ASSERT(packet_length <= 0xffff);
883         /* ZD1211B: Computing the length difference this way, gives us
884          * flexibility to compute the packet length.
885          */
886         cs->packet_length = cpu_to_le16(zd_chip_is_zd1211b(&mac->chip) ?
887                         packet_length - frag_len : packet_length);
888
889         /*
890          * CURRENT LENGTH:
891          * - transmit frame length in microseconds
892          * - seems to be derived from frame length
893          * - see Cal_Us_Service() in zdinlinef.h
894          * - if macp->bTxBurstEnable is enabled, then multiply by 4
895          *  - bTxBurstEnable is never set in the vendor driver
896          *
897          * SERVICE:
898          * - "for PLCP configuration"
899          * - always 0 except in some situations at 802.11b 11M
900          * - see line 53 of zdinlinef.h
901          */
902         cs->service = 0;
903         r = zd_calc_tx_length_us(&cs->service, ZD_RATE(cs->modulation),
904                                  le16_to_cpu(cs->tx_length));
905         if (r < 0)
906                 return r;
907         cs->current_length = cpu_to_le16(r);
908         cs->next_frame_length = 0;
909
910         return 0;
911 }
912
913 /**
914  * zd_op_tx - transmits a network frame to the device
915  *
916  * @dev: mac80211 hardware device
917  * @skb: socket buffer
918  * @control: the control structure
919  *
920  * This function transmit an IEEE 802.11 network frame to the device. The
921  * control block of the skbuff will be initialized. If necessary the incoming
922  * mac80211 queues will be stopped.
923  */
924 static void zd_op_tx(struct ieee80211_hw *hw,
925                      struct ieee80211_tx_control *control,
926                      struct sk_buff *skb)
927 {
928         struct zd_mac *mac = zd_hw_mac(hw);
929         struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
930         int r;
931
932         r = fill_ctrlset(mac, skb);
933         if (r)
934                 goto fail;
935
936         info->rate_driver_data[0] = hw;
937
938         r = zd_usb_tx(&mac->chip.usb, skb);
939         if (r)
940                 goto fail;
941         return;
942
943 fail:
944         dev_kfree_skb(skb);
945 }
946
947 /**
948  * filter_ack - filters incoming packets for acknowledgements
949  * @dev: the mac80211 device
950  * @rx_hdr: received header
951  * @stats: the status for the received packet
952  *
953  * This functions looks for ACK packets and tries to match them with the
954  * frames in the tx queue. If a match is found the frame will be dequeued and
955  * the upper layers is informed about the successful transmission. If
956  * mac80211 queues have been stopped and the number of frames still to be
957  * transmitted is low the queues will be opened again.
958  *
959  * Returns 1 if the frame was an ACK, 0 if it was ignored.
960  */
961 static int filter_ack(struct ieee80211_hw *hw, struct ieee80211_hdr *rx_hdr,
962                       struct ieee80211_rx_status *stats)
963 {
964         struct zd_mac *mac = zd_hw_mac(hw);
965         struct sk_buff *skb;
966         struct sk_buff_head *q;
967         unsigned long flags;
968         int found = 0;
969         int i, position = 0;
970
971         if (!ieee80211_is_ack(rx_hdr->frame_control))
972                 return 0;
973
974         q = &mac->ack_wait_queue;
975         spin_lock_irqsave(&q->lock, flags);
976         skb_queue_walk(q, skb) {
977                 struct ieee80211_hdr *tx_hdr;
978
979                 position ++;
980
981                 if (mac->ack_pending && skb_queue_is_first(q, skb))
982                     continue;
983
984                 tx_hdr = (struct ieee80211_hdr *)skb->data;
985                 if (likely(ether_addr_equal(tx_hdr->addr2, rx_hdr->addr1)))
986                 {
987                         found = 1;
988                         break;
989                 }
990         }
991
992         if (found) {
993                 for (i=1; i<position; i++) {
994                         skb = __skb_dequeue(q);
995                         zd_mac_tx_status(hw, skb,
996                                          mac->ack_pending ? mac->ack_signal : 0,
997                                          NULL);
998                         mac->ack_pending = 0;
999                 }
1000
1001                 mac->ack_pending = 1;
1002                 mac->ack_signal = stats->signal;
1003
1004                 /* Prevent pending tx-packet on AP-mode */
1005                 if (mac->type == NL80211_IFTYPE_AP) {
1006                         skb = __skb_dequeue(q);
1007                         zd_mac_tx_status(hw, skb, mac->ack_signal, NULL);
1008                         mac->ack_pending = 0;
1009                 }
1010         }
1011
1012         spin_unlock_irqrestore(&q->lock, flags);
1013         return 1;
1014 }
1015
1016 int zd_mac_rx(struct ieee80211_hw *hw, const u8 *buffer, unsigned int length)
1017 {
1018         struct zd_mac *mac = zd_hw_mac(hw);
1019         struct ieee80211_rx_status stats;
1020         const struct rx_status *status;
1021         struct sk_buff *skb;
1022         int bad_frame = 0;
1023         __le16 fc;
1024         int need_padding;
1025         int i;
1026         u8 rate;
1027
1028         if (length < ZD_PLCP_HEADER_SIZE + 10 /* IEEE80211_1ADDR_LEN */ +
1029                      FCS_LEN + sizeof(struct rx_status))
1030                 return -EINVAL;
1031
1032         memset(&stats, 0, sizeof(stats));
1033
1034         /* Note about pass_failed_fcs and pass_ctrl access below:
1035          * mac locking intentionally omitted here, as this is the only unlocked
1036          * reader and the only writer is configure_filter. Plus, if there were
1037          * any races accessing these variables, it wouldn't really matter.
1038          * If mac80211 ever provides a way for us to access filter flags
1039          * from outside configure_filter, we could improve on this. Also, this
1040          * situation may change once we implement some kind of DMA-into-skb
1041          * RX path. */
1042
1043         /* Caller has to ensure that length >= sizeof(struct rx_status). */
1044         status = (struct rx_status *)
1045                 (buffer + (length - sizeof(struct rx_status)));
1046         if (status->frame_status & ZD_RX_ERROR) {
1047                 if (mac->pass_failed_fcs &&
1048                                 (status->frame_status & ZD_RX_CRC32_ERROR)) {
1049                         stats.flag |= RX_FLAG_FAILED_FCS_CRC;
1050                         bad_frame = 1;
1051                 } else {
1052                         return -EINVAL;
1053                 }
1054         }
1055
1056         stats.freq = zd_channels[_zd_chip_get_channel(&mac->chip) - 1].center_freq;
1057         stats.band = NL80211_BAND_2GHZ;
1058         stats.signal = zd_check_signal(hw, status->signal_strength);
1059
1060         rate = zd_rx_rate(buffer, status);
1061
1062         /* todo: return index in the big switches in zd_rx_rate instead */
1063         for (i = 0; i < mac->band.n_bitrates; i++)
1064                 if (rate == mac->band.bitrates[i].hw_value)
1065                         stats.rate_idx = i;
1066
1067         length -= ZD_PLCP_HEADER_SIZE + sizeof(struct rx_status);
1068         buffer += ZD_PLCP_HEADER_SIZE;
1069
1070         /* Except for bad frames, filter each frame to see if it is an ACK, in
1071          * which case our internal TX tracking is updated. Normally we then
1072          * bail here as there's no need to pass ACKs on up to the stack, but
1073          * there is also the case where the stack has requested us to pass
1074          * control frames on up (pass_ctrl) which we must consider. */
1075         if (!bad_frame &&
1076                         filter_ack(hw, (struct ieee80211_hdr *)buffer, &stats)
1077                         && !mac->pass_ctrl)
1078                 return 0;
1079
1080         fc = get_unaligned((__le16*)buffer);
1081         need_padding = ieee80211_is_data_qos(fc) ^ ieee80211_has_a4(fc);
1082
1083         skb = dev_alloc_skb(length + (need_padding ? 2 : 0));
1084         if (skb == NULL)
1085                 return -ENOMEM;
1086         if (need_padding) {
1087                 /* Make sure the payload data is 4 byte aligned. */
1088                 skb_reserve(skb, 2);
1089         }
1090
1091         /* FIXME : could we avoid this big memcpy ? */
1092         skb_put_data(skb, buffer, length);
1093
1094         memcpy(IEEE80211_SKB_RXCB(skb), &stats, sizeof(stats));
1095         ieee80211_rx_irqsafe(hw, skb);
1096         return 0;
1097 }
1098
1099 static int zd_op_add_interface(struct ieee80211_hw *hw,
1100                                 struct ieee80211_vif *vif)
1101 {
1102         struct zd_mac *mac = zd_hw_mac(hw);
1103
1104         /* using NL80211_IFTYPE_UNSPECIFIED to indicate no mode selected */
1105         if (mac->type != NL80211_IFTYPE_UNSPECIFIED)
1106                 return -EOPNOTSUPP;
1107
1108         switch (vif->type) {
1109         case NL80211_IFTYPE_MONITOR:
1110         case NL80211_IFTYPE_MESH_POINT:
1111         case NL80211_IFTYPE_STATION:
1112         case NL80211_IFTYPE_ADHOC:
1113         case NL80211_IFTYPE_AP:
1114                 mac->type = vif->type;
1115                 break;
1116         default:
1117                 return -EOPNOTSUPP;
1118         }
1119
1120         mac->vif = vif;
1121
1122         return set_mac_and_bssid(mac);
1123 }
1124
1125 static void zd_op_remove_interface(struct ieee80211_hw *hw,
1126                                     struct ieee80211_vif *vif)
1127 {
1128         struct zd_mac *mac = zd_hw_mac(hw);
1129         mac->type = NL80211_IFTYPE_UNSPECIFIED;
1130         mac->vif = NULL;
1131         zd_set_beacon_interval(&mac->chip, 0, 0, NL80211_IFTYPE_UNSPECIFIED);
1132         zd_write_mac_addr(&mac->chip, NULL);
1133
1134         zd_mac_free_cur_beacon(mac);
1135 }
1136
1137 static int zd_op_config(struct ieee80211_hw *hw, u32 changed)
1138 {
1139         struct zd_mac *mac = zd_hw_mac(hw);
1140         struct ieee80211_conf *conf = &hw->conf;
1141
1142         spin_lock_irq(&mac->lock);
1143         mac->channel = conf->chandef.chan->hw_value;
1144         spin_unlock_irq(&mac->lock);
1145
1146         return zd_chip_set_channel(&mac->chip, conf->chandef.chan->hw_value);
1147 }
1148
1149 static void zd_beacon_done(struct zd_mac *mac)
1150 {
1151         struct sk_buff *skb, *beacon;
1152
1153         if (!test_bit(ZD_DEVICE_RUNNING, &mac->flags))
1154                 return;
1155         if (!mac->vif || mac->vif->type != NL80211_IFTYPE_AP)
1156                 return;
1157
1158         /*
1159          * Send out buffered broad- and multicast frames.
1160          */
1161         while (!ieee80211_queue_stopped(mac->hw, 0)) {
1162                 skb = ieee80211_get_buffered_bc(mac->hw, mac->vif);
1163                 if (!skb)
1164                         break;
1165                 zd_op_tx(mac->hw, NULL, skb);
1166         }
1167
1168         /*
1169          * Fetch next beacon so that tim_count is updated.
1170          */
1171         beacon = ieee80211_beacon_get(mac->hw, mac->vif);
1172         if (beacon)
1173                 zd_mac_config_beacon(mac->hw, beacon, true);
1174
1175         spin_lock_irq(&mac->lock);
1176         mac->beacon.last_update = jiffies;
1177         spin_unlock_irq(&mac->lock);
1178 }
1179
1180 static void zd_process_intr(struct work_struct *work)
1181 {
1182         u16 int_status;
1183         unsigned long flags;
1184         struct zd_mac *mac = container_of(work, struct zd_mac, process_intr);
1185
1186         spin_lock_irqsave(&mac->lock, flags);
1187         int_status = le16_to_cpu(*(__le16 *)(mac->intr_buffer + 4));
1188         spin_unlock_irqrestore(&mac->lock, flags);
1189
1190         if (int_status & INT_CFG_NEXT_BCN) {
1191                 /*dev_dbg_f_limit(zd_mac_dev(mac), "INT_CFG_NEXT_BCN\n");*/
1192                 zd_beacon_done(mac);
1193         } else {
1194                 dev_dbg_f(zd_mac_dev(mac), "Unsupported interrupt\n");
1195         }
1196
1197         zd_chip_enable_hwint(&mac->chip);
1198 }
1199
1200
1201 static u64 zd_op_prepare_multicast(struct ieee80211_hw *hw,
1202                                    struct netdev_hw_addr_list *mc_list)
1203 {
1204         struct zd_mac *mac = zd_hw_mac(hw);
1205         struct zd_mc_hash hash;
1206         struct netdev_hw_addr *ha;
1207
1208         zd_mc_clear(&hash);
1209
1210         netdev_hw_addr_list_for_each(ha, mc_list) {
1211                 dev_dbg_f(zd_mac_dev(mac), "mc addr %pM\n", ha->addr);
1212                 zd_mc_add_addr(&hash, ha->addr);
1213         }
1214
1215         return hash.low | ((u64)hash.high << 32);
1216 }
1217
1218 #define SUPPORTED_FIF_FLAGS \
1219         (FIF_ALLMULTI | FIF_FCSFAIL | FIF_CONTROL | \
1220         FIF_OTHER_BSS | FIF_BCN_PRBRESP_PROMISC)
1221 static void zd_op_configure_filter(struct ieee80211_hw *hw,
1222                         unsigned int changed_flags,
1223                         unsigned int *new_flags,
1224                         u64 multicast)
1225 {
1226         struct zd_mc_hash hash = {
1227                 .low = multicast,
1228                 .high = multicast >> 32,
1229         };
1230         struct zd_mac *mac = zd_hw_mac(hw);
1231         unsigned long flags;
1232         int r;
1233
1234         /* Only deal with supported flags */
1235         changed_flags &= SUPPORTED_FIF_FLAGS;
1236         *new_flags &= SUPPORTED_FIF_FLAGS;
1237
1238         /*
1239          * If multicast parameter (as returned by zd_op_prepare_multicast)
1240          * has changed, no bit in changed_flags is set. To handle this
1241          * situation, we do not return if changed_flags is 0. If we do so,
1242          * we will have some issue with IPv6 which uses multicast for link
1243          * layer address resolution.
1244          */
1245         if (*new_flags & FIF_ALLMULTI)
1246                 zd_mc_add_all(&hash);
1247
1248         spin_lock_irqsave(&mac->lock, flags);
1249         mac->pass_failed_fcs = !!(*new_flags & FIF_FCSFAIL);
1250         mac->pass_ctrl = !!(*new_flags & FIF_CONTROL);
1251         mac->multicast_hash = hash;
1252         spin_unlock_irqrestore(&mac->lock, flags);
1253
1254         zd_chip_set_multicast_hash(&mac->chip, &hash);
1255
1256         if (changed_flags & FIF_CONTROL) {
1257                 r = set_rx_filter(mac);
1258                 if (r)
1259                         dev_err(zd_mac_dev(mac), "set_rx_filter error %d\n", r);
1260         }
1261
1262         /* no handling required for FIF_OTHER_BSS as we don't currently
1263          * do BSSID filtering */
1264         /* FIXME: in future it would be nice to enable the probe response
1265          * filter (so that the driver doesn't see them) until
1266          * FIF_BCN_PRBRESP_PROMISC is set. however due to atomicity here, we'd
1267          * have to schedule work to enable prbresp reception, which might
1268          * happen too late. For now we'll just listen and forward them all the
1269          * time. */
1270 }
1271
1272 static void set_rts_cts(struct zd_mac *mac, unsigned int short_preamble)
1273 {
1274         mutex_lock(&mac->chip.mutex);
1275         zd_chip_set_rts_cts_rate_locked(&mac->chip, short_preamble);
1276         mutex_unlock(&mac->chip.mutex);
1277 }
1278
1279 static void zd_op_bss_info_changed(struct ieee80211_hw *hw,
1280                                    struct ieee80211_vif *vif,
1281                                    struct ieee80211_bss_conf *bss_conf,
1282                                    u32 changes)
1283 {
1284         struct zd_mac *mac = zd_hw_mac(hw);
1285         int associated;
1286
1287         dev_dbg_f(zd_mac_dev(mac), "changes: %x\n", changes);
1288
1289         if (mac->type == NL80211_IFTYPE_MESH_POINT ||
1290             mac->type == NL80211_IFTYPE_ADHOC ||
1291             mac->type == NL80211_IFTYPE_AP) {
1292                 associated = true;
1293                 if (changes & BSS_CHANGED_BEACON) {
1294                         struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
1295
1296                         if (beacon) {
1297                                 zd_chip_disable_hwint(&mac->chip);
1298                                 zd_mac_config_beacon(hw, beacon, false);
1299                                 zd_chip_enable_hwint(&mac->chip);
1300                         }
1301                 }
1302
1303                 if (changes & BSS_CHANGED_BEACON_ENABLED) {
1304                         u16 interval = 0;
1305                         u8 period = 0;
1306
1307                         if (bss_conf->enable_beacon) {
1308                                 period = bss_conf->dtim_period;
1309                                 interval = bss_conf->beacon_int;
1310                         }
1311
1312                         spin_lock_irq(&mac->lock);
1313                         mac->beacon.period = period;
1314                         mac->beacon.interval = interval;
1315                         mac->beacon.last_update = jiffies;
1316                         spin_unlock_irq(&mac->lock);
1317
1318                         zd_set_beacon_interval(&mac->chip, interval, period,
1319                                                mac->type);
1320                 }
1321         } else
1322                 associated = is_valid_ether_addr(bss_conf->bssid);
1323
1324         spin_lock_irq(&mac->lock);
1325         mac->associated = associated;
1326         spin_unlock_irq(&mac->lock);
1327
1328         /* TODO: do hardware bssid filtering */
1329
1330         if (changes & BSS_CHANGED_ERP_PREAMBLE) {
1331                 spin_lock_irq(&mac->lock);
1332                 mac->short_preamble = bss_conf->use_short_preamble;
1333                 spin_unlock_irq(&mac->lock);
1334
1335                 set_rts_cts(mac, bss_conf->use_short_preamble);
1336         }
1337 }
1338
1339 static u64 zd_op_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
1340 {
1341         struct zd_mac *mac = zd_hw_mac(hw);
1342         return zd_chip_get_tsf(&mac->chip);
1343 }
1344
1345 static const struct ieee80211_ops zd_ops = {
1346         .tx                     = zd_op_tx,
1347         .start                  = zd_op_start,
1348         .stop                   = zd_op_stop,
1349         .add_interface          = zd_op_add_interface,
1350         .remove_interface       = zd_op_remove_interface,
1351         .config                 = zd_op_config,
1352         .prepare_multicast      = zd_op_prepare_multicast,
1353         .configure_filter       = zd_op_configure_filter,
1354         .bss_info_changed       = zd_op_bss_info_changed,
1355         .get_tsf                = zd_op_get_tsf,
1356 };
1357
1358 struct ieee80211_hw *zd_mac_alloc_hw(struct usb_interface *intf)
1359 {
1360         struct zd_mac *mac;
1361         struct ieee80211_hw *hw;
1362
1363         hw = ieee80211_alloc_hw(sizeof(struct zd_mac), &zd_ops);
1364         if (!hw) {
1365                 dev_dbg_f(&intf->dev, "out of memory\n");
1366                 return NULL;
1367         }
1368
1369         mac = zd_hw_mac(hw);
1370
1371         memset(mac, 0, sizeof(*mac));
1372         spin_lock_init(&mac->lock);
1373         mac->hw = hw;
1374
1375         mac->type = NL80211_IFTYPE_UNSPECIFIED;
1376
1377         memcpy(mac->channels, zd_channels, sizeof(zd_channels));
1378         memcpy(mac->rates, zd_rates, sizeof(zd_rates));
1379         mac->band.n_bitrates = ARRAY_SIZE(zd_rates);
1380         mac->band.bitrates = mac->rates;
1381         mac->band.n_channels = ARRAY_SIZE(zd_channels);
1382         mac->band.channels = mac->channels;
1383
1384         hw->wiphy->bands[NL80211_BAND_2GHZ] = &mac->band;
1385
1386         ieee80211_hw_set(hw, MFP_CAPABLE);
1387         ieee80211_hw_set(hw, HOST_BROADCAST_PS_BUFFERING);
1388         ieee80211_hw_set(hw, RX_INCLUDES_FCS);
1389         ieee80211_hw_set(hw, SIGNAL_UNSPEC);
1390
1391         hw->wiphy->interface_modes =
1392                 BIT(NL80211_IFTYPE_MESH_POINT) |
1393                 BIT(NL80211_IFTYPE_STATION) |
1394                 BIT(NL80211_IFTYPE_ADHOC) |
1395                 BIT(NL80211_IFTYPE_AP);
1396
1397         wiphy_ext_feature_set(hw->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST);
1398
1399         hw->max_signal = 100;
1400         hw->queues = 1;
1401         hw->extra_tx_headroom = sizeof(struct zd_ctrlset);
1402
1403         /*
1404          * Tell mac80211 that we support multi rate retries
1405          */
1406         hw->max_rates = IEEE80211_TX_MAX_RATES;
1407         hw->max_rate_tries = 18;        /* 9 rates * 2 retries/rate */
1408
1409         skb_queue_head_init(&mac->ack_wait_queue);
1410         mac->ack_pending = 0;
1411
1412         zd_chip_init(&mac->chip, hw, intf);
1413         housekeeping_init(mac);
1414         beacon_init(mac);
1415         INIT_WORK(&mac->process_intr, zd_process_intr);
1416
1417         SET_IEEE80211_DEV(hw, &intf->dev);
1418         return hw;
1419 }
1420
1421 #define BEACON_WATCHDOG_DELAY round_jiffies_relative(HZ)
1422
1423 static void beacon_watchdog_handler(struct work_struct *work)
1424 {
1425         struct zd_mac *mac =
1426                 container_of(work, struct zd_mac, beacon.watchdog_work.work);
1427         struct sk_buff *beacon;
1428         unsigned long timeout;
1429         int interval, period;
1430
1431         if (!test_bit(ZD_DEVICE_RUNNING, &mac->flags))
1432                 goto rearm;
1433         if (mac->type != NL80211_IFTYPE_AP || !mac->vif)
1434                 goto rearm;
1435
1436         spin_lock_irq(&mac->lock);
1437         interval = mac->beacon.interval;
1438         period = mac->beacon.period;
1439         timeout = mac->beacon.last_update +
1440                         msecs_to_jiffies(interval * 1024 / 1000) * 3;
1441         spin_unlock_irq(&mac->lock);
1442
1443         if (interval > 0 && time_is_before_jiffies(timeout)) {
1444                 dev_dbg_f(zd_mac_dev(mac), "beacon interrupt stalled, "
1445                                            "restarting. "
1446                                            "(interval: %d, dtim: %d)\n",
1447                                            interval, period);
1448
1449                 zd_chip_disable_hwint(&mac->chip);
1450
1451                 beacon = ieee80211_beacon_get(mac->hw, mac->vif);
1452                 if (beacon) {
1453                         zd_mac_free_cur_beacon(mac);
1454
1455                         zd_mac_config_beacon(mac->hw, beacon, false);
1456                 }
1457
1458                 zd_set_beacon_interval(&mac->chip, interval, period, mac->type);
1459
1460                 zd_chip_enable_hwint(&mac->chip);
1461
1462                 spin_lock_irq(&mac->lock);
1463                 mac->beacon.last_update = jiffies;
1464                 spin_unlock_irq(&mac->lock);
1465         }
1466
1467 rearm:
1468         queue_delayed_work(zd_workqueue, &mac->beacon.watchdog_work,
1469                            BEACON_WATCHDOG_DELAY);
1470 }
1471
1472 static void beacon_init(struct zd_mac *mac)
1473 {
1474         INIT_DELAYED_WORK(&mac->beacon.watchdog_work, beacon_watchdog_handler);
1475 }
1476
1477 static void beacon_enable(struct zd_mac *mac)
1478 {
1479         dev_dbg_f(zd_mac_dev(mac), "\n");
1480
1481         mac->beacon.last_update = jiffies;
1482         queue_delayed_work(zd_workqueue, &mac->beacon.watchdog_work,
1483                            BEACON_WATCHDOG_DELAY);
1484 }
1485
1486 static void beacon_disable(struct zd_mac *mac)
1487 {
1488         dev_dbg_f(zd_mac_dev(mac), "\n");
1489         cancel_delayed_work_sync(&mac->beacon.watchdog_work);
1490
1491         zd_mac_free_cur_beacon(mac);
1492 }
1493
1494 #define LINK_LED_WORK_DELAY HZ
1495
1496 static void link_led_handler(struct work_struct *work)
1497 {
1498         struct zd_mac *mac =
1499                 container_of(work, struct zd_mac, housekeeping.link_led_work.work);
1500         struct zd_chip *chip = &mac->chip;
1501         int is_associated;
1502         int r;
1503
1504         if (!test_bit(ZD_DEVICE_RUNNING, &mac->flags))
1505                 goto requeue;
1506
1507         spin_lock_irq(&mac->lock);
1508         is_associated = mac->associated;
1509         spin_unlock_irq(&mac->lock);
1510
1511         r = zd_chip_control_leds(chip,
1512                                  is_associated ? ZD_LED_ASSOCIATED : ZD_LED_SCANNING);
1513         if (r)
1514                 dev_dbg_f(zd_mac_dev(mac), "zd_chip_control_leds error %d\n", r);
1515
1516 requeue:
1517         queue_delayed_work(zd_workqueue, &mac->housekeeping.link_led_work,
1518                            LINK_LED_WORK_DELAY);
1519 }
1520
1521 static void housekeeping_init(struct zd_mac *mac)
1522 {
1523         INIT_DELAYED_WORK(&mac->housekeeping.link_led_work, link_led_handler);
1524 }
1525
1526 static void housekeeping_enable(struct zd_mac *mac)
1527 {
1528         dev_dbg_f(zd_mac_dev(mac), "\n");
1529         queue_delayed_work(zd_workqueue, &mac->housekeeping.link_led_work,
1530                            0);
1531 }
1532
1533 static void housekeeping_disable(struct zd_mac *mac)
1534 {
1535         dev_dbg_f(zd_mac_dev(mac), "\n");
1536         cancel_delayed_work_sync(&mac->housekeeping.link_led_work);
1537         zd_chip_control_leds(&mac->chip, ZD_LED_OFF);
1538 }