Linux-libre 4.4.228-gnu
[librecmc/linux-libre.git] / drivers / net / wireless / iwlwifi / dvm / power.c
1 /******************************************************************************
2  *
3  * Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved.
4  *
5  * Portions of this file are derived from the ipw3945 project, as well
6  * as portions of the ieee80211 subsystem header files.
7  *
8  * This program is free software; you can redistribute it and/or modify it
9  * under the terms of version 2 of the GNU General Public License as
10  * published by the Free Software Foundation.
11  *
12  * This program is distributed in the hope that it will be useful, but WITHOUT
13  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
15  * more details.
16  *
17  * You should have received a copy of the GNU General Public License along with
18  * this program; if not, write to the Free Software Foundation, Inc.,
19  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
20  *
21  * The full GNU General Public License is included in this distribution in the
22  * file called LICENSE.
23  *
24  * Contact Information:
25  *  Intel Linux Wireless <ilw@linux.intel.com>
26  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
27  *****************************************************************************/
28
29
30 #include <linux/kernel.h>
31 #include <linux/module.h>
32 #include <linux/slab.h>
33 #include <net/mac80211.h>
34 #include "iwl-io.h"
35 #include "iwl-debug.h"
36 #include "iwl-trans.h"
37 #include "iwl-modparams.h"
38 #include "dev.h"
39 #include "agn.h"
40 #include "commands.h"
41 #include "power.h"
42
43 static bool force_cam = true;
44 module_param(force_cam, bool, 0644);
45 MODULE_PARM_DESC(force_cam, "force continuously aware mode (no power saving at all)");
46
47 /*
48  * Setting power level allows the card to go to sleep when not busy.
49  *
50  * We calculate a sleep command based on the required latency, which
51  * we get from mac80211. In order to handle thermal throttling, we can
52  * also use pre-defined power levels.
53  */
54
55 /*
56  * This defines the old power levels. They are still used by default
57  * (level 1) and for thermal throttle (levels 3 through 5)
58  */
59
60 struct iwl_power_vec_entry {
61         struct iwl_powertable_cmd cmd;
62         u8 no_dtim;     /* number of skip dtim */
63 };
64
65 #define IWL_DTIM_RANGE_0_MAX    2
66 #define IWL_DTIM_RANGE_1_MAX    10
67
68 #define NOSLP cpu_to_le16(0), 0, 0
69 #define SLP IWL_POWER_DRIVER_ALLOW_SLEEP_MSK, 0, 0
70 #define ASLP (IWL_POWER_POWER_SAVE_ENA_MSK |    \
71                 IWL_POWER_POWER_MANAGEMENT_ENA_MSK | \
72                 IWL_POWER_ADVANCE_PM_ENA_MSK)
73 #define ASLP_TOUT(T) cpu_to_le32(T)
74 #define TU_TO_USEC 1024
75 #define SLP_TOUT(T) cpu_to_le32((T) * TU_TO_USEC)
76 #define SLP_VEC(X0, X1, X2, X3, X4) {cpu_to_le32(X0), \
77                                      cpu_to_le32(X1), \
78                                      cpu_to_le32(X2), \
79                                      cpu_to_le32(X3), \
80                                      cpu_to_le32(X4)}
81 /* default power management (not Tx power) table values */
82 /* for DTIM period 0 through IWL_DTIM_RANGE_0_MAX */
83 /* DTIM 0 - 2 */
84 static const struct iwl_power_vec_entry range_0[IWL_POWER_NUM] = {
85         {{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 1, 2, 2, 0xFF)}, 0},
86         {{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0},
87         {{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 2, 2, 2, 0xFF)}, 0},
88         {{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 2, 4, 4, 0xFF)}, 1},
89         {{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 2, 4, 6, 0xFF)}, 2}
90 };
91
92
93 /* for DTIM period IWL_DTIM_RANGE_0_MAX + 1 through IWL_DTIM_RANGE_1_MAX */
94 /* DTIM 3 - 10 */
95 static const struct iwl_power_vec_entry range_1[IWL_POWER_NUM] = {
96         {{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 4)}, 0},
97         {{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 3, 4, 7)}, 0},
98         {{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 4, 6, 7, 9)}, 0},
99         {{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 4, 6, 9, 10)}, 1},
100         {{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 4, 6, 10, 10)}, 2}
101 };
102
103 /* for DTIM period > IWL_DTIM_RANGE_1_MAX */
104 /* DTIM 11 - */
105 static const struct iwl_power_vec_entry range_2[IWL_POWER_NUM] = {
106         {{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 0xFF)}, 0},
107         {{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(2, 4, 6, 7, 0xFF)}, 0},
108         {{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0},
109         {{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0},
110         {{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(4, 7, 10, 10, 0xFF)}, 0}
111 };
112
113 /* advance power management */
114 /* DTIM 0 - 2 */
115 static const struct iwl_power_vec_entry apm_range_0[IWL_POWER_NUM] = {
116         {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
117                 SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
118         {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
119                 SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
120         {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
121                 SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
122         {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
123                 SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
124         {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
125                 SLP_VEC(1, 2, 6, 8, 0xFF), ASLP_TOUT(2)}, 2}
126 };
127
128
129 /* for DTIM period IWL_DTIM_RANGE_0_MAX + 1 through IWL_DTIM_RANGE_1_MAX */
130 /* DTIM 3 - 10 */
131 static const struct iwl_power_vec_entry apm_range_1[IWL_POWER_NUM] = {
132         {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
133                 SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
134         {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
135                 SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
136         {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
137                 SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
138         {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
139                 SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
140         {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
141                 SLP_VEC(1, 2, 6, 8, 0xFF), 0}, 2}
142 };
143
144 /* for DTIM period > IWL_DTIM_RANGE_1_MAX */
145 /* DTIM 11 - */
146 static const struct iwl_power_vec_entry apm_range_2[IWL_POWER_NUM] = {
147         {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
148                 SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
149         {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
150                 SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
151         {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
152                 SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
153         {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
154                 SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
155         {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
156                 SLP_VEC(1, 2, 6, 8, 0xFF), ASLP_TOUT(2)}, 2}
157 };
158
159 static void iwl_static_sleep_cmd(struct iwl_priv *priv,
160                                  struct iwl_powertable_cmd *cmd,
161                                  enum iwl_power_level lvl, int period)
162 {
163         const struct iwl_power_vec_entry *table;
164         int max_sleep[IWL_POWER_VEC_SIZE] = { 0 };
165         int i;
166         u8 skip;
167         u32 slp_itrvl;
168
169         if (priv->lib->adv_pm) {
170                 table = apm_range_2;
171                 if (period <= IWL_DTIM_RANGE_1_MAX)
172                         table = apm_range_1;
173                 if (period <= IWL_DTIM_RANGE_0_MAX)
174                         table = apm_range_0;
175         } else {
176                 table = range_2;
177                 if (period <= IWL_DTIM_RANGE_1_MAX)
178                         table = range_1;
179                 if (period <= IWL_DTIM_RANGE_0_MAX)
180                         table = range_0;
181         }
182
183         if (WARN_ON(lvl < 0 || lvl >= IWL_POWER_NUM))
184                 memset(cmd, 0, sizeof(*cmd));
185         else
186                 *cmd = table[lvl].cmd;
187
188         if (period == 0) {
189                 skip = 0;
190                 period = 1;
191                 for (i = 0; i < IWL_POWER_VEC_SIZE; i++)
192                         max_sleep[i] =  1;
193
194         } else {
195                 skip = table[lvl].no_dtim;
196                 for (i = 0; i < IWL_POWER_VEC_SIZE; i++)
197                         max_sleep[i] = le32_to_cpu(cmd->sleep_interval[i]);
198                 max_sleep[IWL_POWER_VEC_SIZE - 1] = skip + 1;
199         }
200
201         slp_itrvl = le32_to_cpu(cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]);
202         /* figure out the listen interval based on dtim period and skip */
203         if (slp_itrvl == 0xFF)
204                 cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1] =
205                         cpu_to_le32(period * (skip + 1));
206
207         slp_itrvl = le32_to_cpu(cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]);
208         if (slp_itrvl > period)
209                 cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1] =
210                         cpu_to_le32((slp_itrvl / period) * period);
211
212         if (skip)
213                 cmd->flags |= IWL_POWER_SLEEP_OVER_DTIM_MSK;
214         else
215                 cmd->flags &= ~IWL_POWER_SLEEP_OVER_DTIM_MSK;
216
217         if (priv->cfg->base_params->shadow_reg_enable)
218                 cmd->flags |= IWL_POWER_SHADOW_REG_ENA;
219         else
220                 cmd->flags &= ~IWL_POWER_SHADOW_REG_ENA;
221
222         if (iwl_advanced_bt_coexist(priv)) {
223                 if (!priv->lib->bt_params->bt_sco_disable)
224                         cmd->flags |= IWL_POWER_BT_SCO_ENA;
225                 else
226                         cmd->flags &= ~IWL_POWER_BT_SCO_ENA;
227         }
228
229
230         slp_itrvl = le32_to_cpu(cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]);
231         if (slp_itrvl > IWL_CONN_MAX_LISTEN_INTERVAL)
232                 cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1] =
233                         cpu_to_le32(IWL_CONN_MAX_LISTEN_INTERVAL);
234
235         /* enforce max sleep interval */
236         for (i = IWL_POWER_VEC_SIZE - 1; i >= 0 ; i--) {
237                 if (le32_to_cpu(cmd->sleep_interval[i]) >
238                     (max_sleep[i] * period))
239                         cmd->sleep_interval[i] =
240                                 cpu_to_le32(max_sleep[i] * period);
241                 if (i != (IWL_POWER_VEC_SIZE - 1)) {
242                         if (le32_to_cpu(cmd->sleep_interval[i]) >
243                             le32_to_cpu(cmd->sleep_interval[i+1]))
244                                 cmd->sleep_interval[i] =
245                                         cmd->sleep_interval[i+1];
246                 }
247         }
248
249         if (priv->power_data.bus_pm)
250                 cmd->flags |= IWL_POWER_PCI_PM_MSK;
251         else
252                 cmd->flags &= ~IWL_POWER_PCI_PM_MSK;
253
254         IWL_DEBUG_POWER(priv, "numSkipDtim = %u, dtimPeriod = %d\n",
255                         skip, period);
256         /* The power level here is 0-4 (used as array index), but user expects
257         to see 1-5 (according to spec). */
258         IWL_DEBUG_POWER(priv, "Sleep command for index %d\n", lvl + 1);
259 }
260
261 static void iwl_power_sleep_cam_cmd(struct iwl_priv *priv,
262                                     struct iwl_powertable_cmd *cmd)
263 {
264         memset(cmd, 0, sizeof(*cmd));
265
266         if (priv->power_data.bus_pm)
267                 cmd->flags |= IWL_POWER_PCI_PM_MSK;
268
269         IWL_DEBUG_POWER(priv, "Sleep command for CAM\n");
270 }
271
272 static int iwl_set_power(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd)
273 {
274         IWL_DEBUG_POWER(priv, "Sending power/sleep command\n");
275         IWL_DEBUG_POWER(priv, "Flags value = 0x%08X\n", cmd->flags);
276         IWL_DEBUG_POWER(priv, "Tx timeout = %u\n", le32_to_cpu(cmd->tx_data_timeout));
277         IWL_DEBUG_POWER(priv, "Rx timeout = %u\n", le32_to_cpu(cmd->rx_data_timeout));
278         IWL_DEBUG_POWER(priv, "Sleep interval vector = { %d , %d , %d , %d , %d }\n",
279                         le32_to_cpu(cmd->sleep_interval[0]),
280                         le32_to_cpu(cmd->sleep_interval[1]),
281                         le32_to_cpu(cmd->sleep_interval[2]),
282                         le32_to_cpu(cmd->sleep_interval[3]),
283                         le32_to_cpu(cmd->sleep_interval[4]));
284
285         return iwl_dvm_send_cmd_pdu(priv, POWER_TABLE_CMD, 0,
286                                 sizeof(struct iwl_powertable_cmd), cmd);
287 }
288
289 static void iwl_power_build_cmd(struct iwl_priv *priv,
290                                 struct iwl_powertable_cmd *cmd)
291 {
292         bool enabled = priv->hw->conf.flags & IEEE80211_CONF_PS;
293         int dtimper;
294
295         if (force_cam) {
296                 iwl_power_sleep_cam_cmd(priv, cmd);
297                 return;
298         }
299
300         dtimper = priv->hw->conf.ps_dtim_period ?: 1;
301
302         if (priv->wowlan)
303                 iwl_static_sleep_cmd(priv, cmd, IWL_POWER_INDEX_5, dtimper);
304         else if (!priv->lib->no_idle_support &&
305                  priv->hw->conf.flags & IEEE80211_CONF_IDLE)
306                 iwl_static_sleep_cmd(priv, cmd, IWL_POWER_INDEX_5, 20);
307         else if (iwl_tt_is_low_power_state(priv)) {
308                 /* in thermal throttling low power state */
309                 iwl_static_sleep_cmd(priv, cmd,
310                     iwl_tt_current_power_mode(priv), dtimper);
311         } else if (!enabled)
312                 iwl_power_sleep_cam_cmd(priv, cmd);
313         else if (priv->power_data.debug_sleep_level_override >= 0)
314                 iwl_static_sleep_cmd(priv, cmd,
315                                      priv->power_data.debug_sleep_level_override,
316                                      dtimper);
317         else {
318                 /* Note that the user parameter is 1-5 (according to spec),
319                 but we pass 0-4 because it acts as an array index. */
320                 if (iwlwifi_mod_params.power_level > IWL_POWER_INDEX_1 &&
321                     iwlwifi_mod_params.power_level <= IWL_POWER_NUM)
322                         iwl_static_sleep_cmd(priv, cmd,
323                                 iwlwifi_mod_params.power_level - 1, dtimper);
324                 else
325                         iwl_static_sleep_cmd(priv, cmd,
326                                 IWL_POWER_INDEX_1, dtimper);
327         }
328 }
329
330 int iwl_power_set_mode(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd,
331                        bool force)
332 {
333         int ret;
334         bool update_chains;
335
336         lockdep_assert_held(&priv->mutex);
337
338         /* Don't update the RX chain when chain noise calibration is running */
339         update_chains = priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE ||
340                         priv->chain_noise_data.state == IWL_CHAIN_NOISE_ALIVE;
341
342         if (!memcmp(&priv->power_data.sleep_cmd, cmd, sizeof(*cmd)) && !force)
343                 return 0;
344
345         if (!iwl_is_ready_rf(priv))
346                 return -EIO;
347
348         /* scan complete use sleep_power_next, need to be updated */
349         memcpy(&priv->power_data.sleep_cmd_next, cmd, sizeof(*cmd));
350         if (test_bit(STATUS_SCANNING, &priv->status) && !force) {
351                 IWL_DEBUG_INFO(priv, "Defer power set mode while scanning\n");
352                 return 0;
353         }
354
355         if (cmd->flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK)
356                 iwl_dvm_set_pmi(priv, true);
357
358         ret = iwl_set_power(priv, cmd);
359         if (!ret) {
360                 if (!(cmd->flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK))
361                         iwl_dvm_set_pmi(priv, false);
362
363                 if (update_chains)
364                         iwl_update_chain_flags(priv);
365                 else
366                         IWL_DEBUG_POWER(priv,
367                                         "Cannot update the power, chain noise "
368                                         "calibration running: %d\n",
369                                         priv->chain_noise_data.state);
370
371                 memcpy(&priv->power_data.sleep_cmd, cmd, sizeof(*cmd));
372         } else
373                 IWL_ERR(priv, "set power fail, ret = %d\n", ret);
374
375         return ret;
376 }
377
378 int iwl_power_update_mode(struct iwl_priv *priv, bool force)
379 {
380         struct iwl_powertable_cmd cmd;
381
382         iwl_power_build_cmd(priv, &cmd);
383         return iwl_power_set_mode(priv, &cmd, force);
384 }
385
386 /* initialize to default */
387 void iwl_power_initialize(struct iwl_priv *priv)
388 {
389         priv->power_data.bus_pm = priv->trans->pm_support;
390
391         priv->power_data.debug_sleep_level_override = -1;
392
393         memset(&priv->power_data.sleep_cmd, 0,
394                 sizeof(priv->power_data.sleep_cmd));
395 }