Linux-libre 4.9.189-gnu
[librecmc/linux-libre.git] / drivers / net / usb / qmi_wwan.c
1 /*
2  * Copyright (c) 2012  Bjørn Mork <bjorn@mork.no>
3  *
4  * The probing code is heavily inspired by cdc_ether, which is:
5  * Copyright (C) 2003-2005 by David Brownell
6  * Copyright (C) 2006 by Ole Andre Vadla Ravnas (ActiveSync)
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License
10  * version 2 as published by the Free Software Foundation.
11  */
12
13 #include <linux/module.h>
14 #include <linux/netdevice.h>
15 #include <linux/ethtool.h>
16 #include <linux/etherdevice.h>
17 #include <linux/if_arp.h>
18 #include <linux/mii.h>
19 #include <linux/rtnetlink.h>
20 #include <linux/usb.h>
21 #include <linux/usb/cdc.h>
22 #include <linux/usb/usbnet.h>
23 #include <linux/usb/cdc-wdm.h>
24
25 /* This driver supports wwan (3G/LTE/?) devices using a vendor
26  * specific management protocol called Qualcomm MSM Interface (QMI) -
27  * in addition to the more common AT commands over serial interface
28  * management
29  *
30  * QMI is wrapped in CDC, using CDC encapsulated commands on the
31  * control ("master") interface of a two-interface CDC Union
32  * resembling standard CDC ECM.  The devices do not use the control
33  * interface for any other CDC messages.  Most likely because the
34  * management protocol is used in place of the standard CDC
35  * notifications NOTIFY_NETWORK_CONNECTION and NOTIFY_SPEED_CHANGE
36  *
37  * Alternatively, control and data functions can be combined in a
38  * single USB interface.
39  *
40  * Handling a protocol like QMI is out of the scope for any driver.
41  * It is exported as a character device using the cdc-wdm driver as
42  * a subdriver, enabling userspace applications ("modem managers") to
43  * handle it.
44  *
45  * These devices may alternatively/additionally be configured using AT
46  * commands on a serial interface
47  */
48
49 /* driver specific data */
50 struct qmi_wwan_state {
51         struct usb_driver *subdriver;
52         atomic_t pmcount;
53         unsigned long flags;
54         struct usb_interface *control;
55         struct usb_interface *data;
56 };
57
58 enum qmi_wwan_flags {
59         QMI_WWAN_FLAG_RAWIP = 1 << 0,
60 };
61
62 enum qmi_wwan_quirks {
63         QMI_WWAN_QUIRK_DTR = 1 << 0,    /* needs "set DTR" request */
64 };
65
66 static void qmi_wwan_netdev_setup(struct net_device *net)
67 {
68         struct usbnet *dev = netdev_priv(net);
69         struct qmi_wwan_state *info = (void *)&dev->data;
70
71         if (info->flags & QMI_WWAN_FLAG_RAWIP) {
72                 net->header_ops      = NULL;  /* No header */
73                 net->type            = ARPHRD_NONE;
74                 net->hard_header_len = 0;
75                 net->addr_len        = 0;
76                 net->flags           = IFF_POINTOPOINT | IFF_NOARP | IFF_MULTICAST;
77                 set_bit(EVENT_NO_IP_ALIGN, &dev->flags);
78                 netdev_dbg(net, "mode: raw IP\n");
79         } else if (!net->header_ops) { /* don't bother if already set */
80                 ether_setup(net);
81                 clear_bit(EVENT_NO_IP_ALIGN, &dev->flags);
82                 netdev_dbg(net, "mode: Ethernet\n");
83         }
84
85         /* recalculate buffers after changing hard_header_len */
86         usbnet_change_mtu(net, net->mtu);
87 }
88
89 static ssize_t raw_ip_show(struct device *d, struct device_attribute *attr, char *buf)
90 {
91         struct usbnet *dev = netdev_priv(to_net_dev(d));
92         struct qmi_wwan_state *info = (void *)&dev->data;
93
94         return sprintf(buf, "%c\n", info->flags & QMI_WWAN_FLAG_RAWIP ? 'Y' : 'N');
95 }
96
97 static ssize_t raw_ip_store(struct device *d,  struct device_attribute *attr, const char *buf, size_t len)
98 {
99         struct usbnet *dev = netdev_priv(to_net_dev(d));
100         struct qmi_wwan_state *info = (void *)&dev->data;
101         bool enable;
102         int ret;
103
104         if (strtobool(buf, &enable))
105                 return -EINVAL;
106
107         /* no change? */
108         if (enable == (info->flags & QMI_WWAN_FLAG_RAWIP))
109                 return len;
110
111         if (!rtnl_trylock())
112                 return restart_syscall();
113
114         /* we don't want to modify a running netdev */
115         if (netif_running(dev->net)) {
116                 netdev_err(dev->net, "Cannot change a running device\n");
117                 ret = -EBUSY;
118                 goto err;
119         }
120
121         /* let other drivers deny the change */
122         ret = call_netdevice_notifiers(NETDEV_PRE_TYPE_CHANGE, dev->net);
123         ret = notifier_to_errno(ret);
124         if (ret) {
125                 netdev_err(dev->net, "Type change was refused\n");
126                 goto err;
127         }
128
129         if (enable)
130                 info->flags |= QMI_WWAN_FLAG_RAWIP;
131         else
132                 info->flags &= ~QMI_WWAN_FLAG_RAWIP;
133         qmi_wwan_netdev_setup(dev->net);
134         call_netdevice_notifiers(NETDEV_POST_TYPE_CHANGE, dev->net);
135         ret = len;
136 err:
137         rtnl_unlock();
138         return ret;
139 }
140
141 static DEVICE_ATTR_RW(raw_ip);
142
143 static struct attribute *qmi_wwan_sysfs_attrs[] = {
144         &dev_attr_raw_ip.attr,
145         NULL,
146 };
147
148 static struct attribute_group qmi_wwan_sysfs_attr_group = {
149         .name = "qmi",
150         .attrs = qmi_wwan_sysfs_attrs,
151 };
152
153 /* default ethernet address used by the modem */
154 static const u8 default_modem_addr[ETH_ALEN] = {0x02, 0x50, 0xf3};
155
156 static const u8 buggy_fw_addr[ETH_ALEN] = {0x00, 0xa0, 0xc6, 0x00, 0x00, 0x00};
157
158 /* Make up an ethernet header if the packet doesn't have one.
159  *
160  * A firmware bug common among several devices cause them to send raw
161  * IP packets under some circumstances.  There is no way for the
162  * driver/host to know when this will happen.  And even when the bug
163  * hits, some packets will still arrive with an intact header.
164  *
165  * The supported devices are only capably of sending IPv4, IPv6 and
166  * ARP packets on a point-to-point link. Any packet with an ethernet
167  * header will have either our address or a broadcast/multicast
168  * address as destination.  ARP packets will always have a header.
169  *
170  * This means that this function will reliably add the appropriate
171  * header iff necessary, provided our hardware address does not start
172  * with 4 or 6.
173  *
174  * Another common firmware bug results in all packets being addressed
175  * to 00:a0:c6:00:00:00 despite the host address being different.
176  * This function will also fixup such packets.
177  */
178 static int qmi_wwan_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
179 {
180         struct qmi_wwan_state *info = (void *)&dev->data;
181         bool rawip = info->flags & QMI_WWAN_FLAG_RAWIP;
182         __be16 proto;
183
184         /* This check is no longer done by usbnet */
185         if (skb->len < dev->net->hard_header_len)
186                 return 0;
187
188         switch (skb->data[0] & 0xf0) {
189         case 0x40:
190                 proto = htons(ETH_P_IP);
191                 break;
192         case 0x60:
193                 proto = htons(ETH_P_IPV6);
194                 break;
195         case 0x00:
196                 if (rawip)
197                         return 0;
198                 if (is_multicast_ether_addr(skb->data))
199                         return 1;
200                 /* possibly bogus destination - rewrite just in case */
201                 skb_reset_mac_header(skb);
202                 goto fix_dest;
203         default:
204                 if (rawip)
205                         return 0;
206                 /* pass along other packets without modifications */
207                 return 1;
208         }
209         if (rawip) {
210                 skb_reset_mac_header(skb);
211                 skb->dev = dev->net; /* normally set by eth_type_trans */
212                 skb->protocol = proto;
213                 return 1;
214         }
215
216         if (skb_headroom(skb) < ETH_HLEN)
217                 return 0;
218         skb_push(skb, ETH_HLEN);
219         skb_reset_mac_header(skb);
220         eth_hdr(skb)->h_proto = proto;
221         eth_zero_addr(eth_hdr(skb)->h_source);
222 fix_dest:
223         memcpy(eth_hdr(skb)->h_dest, dev->net->dev_addr, ETH_ALEN);
224         return 1;
225 }
226
227 /* very simplistic detection of IPv4 or IPv6 headers */
228 static bool possibly_iphdr(const char *data)
229 {
230         return (data[0] & 0xd0) == 0x40;
231 }
232
233 /* disallow addresses which may be confused with IP headers */
234 static int qmi_wwan_mac_addr(struct net_device *dev, void *p)
235 {
236         int ret;
237         struct sockaddr *addr = p;
238
239         ret = eth_prepare_mac_addr_change(dev, p);
240         if (ret < 0)
241                 return ret;
242         if (possibly_iphdr(addr->sa_data))
243                 return -EADDRNOTAVAIL;
244         eth_commit_mac_addr_change(dev, p);
245         return 0;
246 }
247
248 static const struct net_device_ops qmi_wwan_netdev_ops = {
249         .ndo_open               = usbnet_open,
250         .ndo_stop               = usbnet_stop,
251         .ndo_start_xmit         = usbnet_start_xmit,
252         .ndo_tx_timeout         = usbnet_tx_timeout,
253         .ndo_change_mtu         = usbnet_change_mtu,
254         .ndo_set_mac_address    = qmi_wwan_mac_addr,
255         .ndo_validate_addr      = eth_validate_addr,
256 };
257
258 /* using a counter to merge subdriver requests with our own into a
259  * combined state
260  */
261 static int qmi_wwan_manage_power(struct usbnet *dev, int on)
262 {
263         struct qmi_wwan_state *info = (void *)&dev->data;
264         int rv;
265
266         dev_dbg(&dev->intf->dev, "%s() pmcount=%d, on=%d\n", __func__,
267                 atomic_read(&info->pmcount), on);
268
269         if ((on && atomic_add_return(1, &info->pmcount) == 1) ||
270             (!on && atomic_dec_and_test(&info->pmcount))) {
271                 /* need autopm_get/put here to ensure the usbcore sees
272                  * the new value
273                  */
274                 rv = usb_autopm_get_interface(dev->intf);
275                 dev->intf->needs_remote_wakeup = on;
276                 if (!rv)
277                         usb_autopm_put_interface(dev->intf);
278         }
279         return 0;
280 }
281
282 static int qmi_wwan_cdc_wdm_manage_power(struct usb_interface *intf, int on)
283 {
284         struct usbnet *dev = usb_get_intfdata(intf);
285
286         /* can be called while disconnecting */
287         if (!dev)
288                 return 0;
289         return qmi_wwan_manage_power(dev, on);
290 }
291
292 /* collect all three endpoints and register subdriver */
293 static int qmi_wwan_register_subdriver(struct usbnet *dev)
294 {
295         int rv;
296         struct usb_driver *subdriver = NULL;
297         struct qmi_wwan_state *info = (void *)&dev->data;
298
299         /* collect bulk endpoints */
300         rv = usbnet_get_endpoints(dev, info->data);
301         if (rv < 0)
302                 goto err;
303
304         /* update status endpoint if separate control interface */
305         if (info->control != info->data)
306                 dev->status = &info->control->cur_altsetting->endpoint[0];
307
308         /* require interrupt endpoint for subdriver */
309         if (!dev->status) {
310                 rv = -EINVAL;
311                 goto err;
312         }
313
314         /* for subdriver power management */
315         atomic_set(&info->pmcount, 0);
316
317         /* register subdriver */
318         subdriver = usb_cdc_wdm_register(info->control, &dev->status->desc,
319                                          4096, &qmi_wwan_cdc_wdm_manage_power);
320         if (IS_ERR(subdriver)) {
321                 dev_err(&info->control->dev, "subdriver registration failed\n");
322                 rv = PTR_ERR(subdriver);
323                 goto err;
324         }
325
326         /* prevent usbnet from using status endpoint */
327         dev->status = NULL;
328
329         /* save subdriver struct for suspend/resume wrappers */
330         info->subdriver = subdriver;
331
332 err:
333         return rv;
334 }
335
336 /* Send CDC SetControlLineState request, setting or clearing the DTR.
337  * "Required for Autoconnect and 9x30 to wake up" according to the
338  * GobiNet driver. The requirement has been verified on an MDM9230
339  * based Sierra Wireless MC7455
340  */
341 static int qmi_wwan_change_dtr(struct usbnet *dev, bool on)
342 {
343         u8 intf = dev->intf->cur_altsetting->desc.bInterfaceNumber;
344
345         return usbnet_write_cmd(dev, USB_CDC_REQ_SET_CONTROL_LINE_STATE,
346                                 USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
347                                 on ? 0x01 : 0x00, intf, NULL, 0);
348 }
349
350 static int qmi_wwan_bind(struct usbnet *dev, struct usb_interface *intf)
351 {
352         int status = -1;
353         u8 *buf = intf->cur_altsetting->extra;
354         int len = intf->cur_altsetting->extralen;
355         struct usb_interface_descriptor *desc = &intf->cur_altsetting->desc;
356         struct usb_cdc_union_desc *cdc_union;
357         struct usb_cdc_ether_desc *cdc_ether;
358         struct usb_driver *driver = driver_of(intf);
359         struct qmi_wwan_state *info = (void *)&dev->data;
360         struct usb_cdc_parsed_header hdr;
361
362         BUILD_BUG_ON((sizeof(((struct usbnet *)0)->data) <
363                       sizeof(struct qmi_wwan_state)));
364
365         /* set up initial state */
366         info->control = intf;
367         info->data = intf;
368
369         /* and a number of CDC descriptors */
370         cdc_parse_cdc_header(&hdr, intf, buf, len);
371         cdc_union = hdr.usb_cdc_union_desc;
372         cdc_ether = hdr.usb_cdc_ether_desc;
373
374         /* Use separate control and data interfaces if we found a CDC Union */
375         if (cdc_union) {
376                 info->data = usb_ifnum_to_if(dev->udev,
377                                              cdc_union->bSlaveInterface0);
378                 if (desc->bInterfaceNumber != cdc_union->bMasterInterface0 ||
379                     !info->data) {
380                         dev_err(&intf->dev,
381                                 "bogus CDC Union: master=%u, slave=%u\n",
382                                 cdc_union->bMasterInterface0,
383                                 cdc_union->bSlaveInterface0);
384
385                         /* ignore and continue... */
386                         cdc_union = NULL;
387                         info->data = intf;
388                 }
389         }
390
391         /* errors aren't fatal - we can live with the dynamic address */
392         if (cdc_ether && cdc_ether->wMaxSegmentSize) {
393                 dev->hard_mtu = le16_to_cpu(cdc_ether->wMaxSegmentSize);
394                 usbnet_get_ethernet_addr(dev, cdc_ether->iMACAddress);
395         }
396
397         /* claim data interface and set it up */
398         if (info->control != info->data) {
399                 status = usb_driver_claim_interface(driver, info->data, dev);
400                 if (status < 0)
401                         goto err;
402         }
403
404         status = qmi_wwan_register_subdriver(dev);
405         if (status < 0 && info->control != info->data) {
406                 usb_set_intfdata(info->data, NULL);
407                 usb_driver_release_interface(driver, info->data);
408         }
409
410         /* disabling remote wakeup on MDM9x30 devices has the same
411          * effect as clearing DTR. The device will not respond to QMI
412          * requests until we set DTR again.  This is similar to a
413          * QMI_CTL SYNC request, clearing a lot of firmware state
414          * including the client ID allocations.
415          *
416          * Our usage model allows a session to span multiple
417          * open/close events, so we must prevent the firmware from
418          * clearing out state the clients might need.
419          *
420          * MDM9x30 is the first QMI chipset with USB3 support. Abuse
421          * this fact to enable the quirk for all USB3 devices.
422          *
423          * There are also chipsets with the same "set DTR" requirement
424          * but without USB3 support.  Devices based on these chips
425          * need a quirk flag in the device ID table.
426          */
427         if (dev->driver_info->data & QMI_WWAN_QUIRK_DTR ||
428             le16_to_cpu(dev->udev->descriptor.bcdUSB) >= 0x0201) {
429                 qmi_wwan_manage_power(dev, 1);
430                 qmi_wwan_change_dtr(dev, true);
431         }
432
433         /* Never use the same address on both ends of the link, even if the
434          * buggy firmware told us to. Or, if device is assigned the well-known
435          * buggy firmware MAC address, replace it with a random address,
436          */
437         if (ether_addr_equal(dev->net->dev_addr, default_modem_addr) ||
438             ether_addr_equal(dev->net->dev_addr, buggy_fw_addr))
439                 eth_hw_addr_random(dev->net);
440
441         /* make MAC addr easily distinguishable from an IP header */
442         if (possibly_iphdr(dev->net->dev_addr)) {
443                 dev->net->dev_addr[0] |= 0x02;  /* set local assignment bit */
444                 dev->net->dev_addr[0] &= 0xbf;  /* clear "IP" bit */
445         }
446         dev->net->netdev_ops = &qmi_wwan_netdev_ops;
447         dev->net->sysfs_groups[0] = &qmi_wwan_sysfs_attr_group;
448 err:
449         return status;
450 }
451
452 static void qmi_wwan_unbind(struct usbnet *dev, struct usb_interface *intf)
453 {
454         struct qmi_wwan_state *info = (void *)&dev->data;
455         struct usb_driver *driver = driver_of(intf);
456         struct usb_interface *other;
457
458         if (info->subdriver && info->subdriver->disconnect)
459                 info->subdriver->disconnect(info->control);
460
461         /* disable MDM9x30 quirk */
462         if (le16_to_cpu(dev->udev->descriptor.bcdUSB) >= 0x0201) {
463                 qmi_wwan_change_dtr(dev, false);
464                 qmi_wwan_manage_power(dev, 0);
465         }
466
467         /* allow user to unbind using either control or data */
468         if (intf == info->control)
469                 other = info->data;
470         else
471                 other = info->control;
472
473         /* only if not shared */
474         if (other && intf != other) {
475                 usb_set_intfdata(other, NULL);
476                 usb_driver_release_interface(driver, other);
477         }
478
479         info->subdriver = NULL;
480         info->data = NULL;
481         info->control = NULL;
482 }
483
484 /* suspend/resume wrappers calling both usbnet and the cdc-wdm
485  * subdriver if present.
486  *
487  * NOTE: cdc-wdm also supports pre/post_reset, but we cannot provide
488  * wrappers for those without adding usbnet reset support first.
489  */
490 static int qmi_wwan_suspend(struct usb_interface *intf, pm_message_t message)
491 {
492         struct usbnet *dev = usb_get_intfdata(intf);
493         struct qmi_wwan_state *info = (void *)&dev->data;
494         int ret;
495
496         /* Both usbnet_suspend() and subdriver->suspend() MUST return 0
497          * in system sleep context, otherwise, the resume callback has
498          * to recover device from previous suspend failure.
499          */
500         ret = usbnet_suspend(intf, message);
501         if (ret < 0)
502                 goto err;
503
504         if (intf == info->control && info->subdriver &&
505             info->subdriver->suspend)
506                 ret = info->subdriver->suspend(intf, message);
507         if (ret < 0)
508                 usbnet_resume(intf);
509 err:
510         return ret;
511 }
512
513 static int qmi_wwan_resume(struct usb_interface *intf)
514 {
515         struct usbnet *dev = usb_get_intfdata(intf);
516         struct qmi_wwan_state *info = (void *)&dev->data;
517         int ret = 0;
518         bool callsub = (intf == info->control && info->subdriver &&
519                         info->subdriver->resume);
520
521         if (callsub)
522                 ret = info->subdriver->resume(intf);
523         if (ret < 0)
524                 goto err;
525         ret = usbnet_resume(intf);
526         if (ret < 0 && callsub)
527                 info->subdriver->suspend(intf, PMSG_SUSPEND);
528 err:
529         return ret;
530 }
531
532 static const struct driver_info qmi_wwan_info = {
533         .description    = "WWAN/QMI device",
534         .flags          = FLAG_WWAN | FLAG_SEND_ZLP,
535         .bind           = qmi_wwan_bind,
536         .unbind         = qmi_wwan_unbind,
537         .manage_power   = qmi_wwan_manage_power,
538         .rx_fixup       = qmi_wwan_rx_fixup,
539 };
540
541 static const struct driver_info qmi_wwan_info_quirk_dtr = {
542         .description    = "WWAN/QMI device",
543         .flags          = FLAG_WWAN | FLAG_SEND_ZLP,
544         .bind           = qmi_wwan_bind,
545         .unbind         = qmi_wwan_unbind,
546         .manage_power   = qmi_wwan_manage_power,
547         .rx_fixup       = qmi_wwan_rx_fixup,
548         .data           = QMI_WWAN_QUIRK_DTR,
549 };
550
551 #define HUAWEI_VENDOR_ID        0x12D1
552
553 /* map QMI/wwan function by a fixed interface number */
554 #define QMI_FIXED_INTF(vend, prod, num) \
555         USB_DEVICE_INTERFACE_NUMBER(vend, prod, num), \
556         .driver_info = (unsigned long)&qmi_wwan_info
557
558 /* devices requiring "set DTR" quirk */
559 #define QMI_QUIRK_SET_DTR(vend, prod, num) \
560         USB_DEVICE_INTERFACE_NUMBER(vend, prod, num), \
561         .driver_info = (unsigned long)&qmi_wwan_info_quirk_dtr
562
563 /* Gobi 1000 QMI/wwan interface number is 3 according to qcserial */
564 #define QMI_GOBI1K_DEVICE(vend, prod) \
565         QMI_FIXED_INTF(vend, prod, 3)
566
567 /* Gobi 2000/3000 QMI/wwan interface number is 0 according to qcserial */
568 #define QMI_GOBI_DEVICE(vend, prod) \
569         QMI_FIXED_INTF(vend, prod, 0)
570
571 static const struct usb_device_id products[] = {
572         /* 1. CDC ECM like devices match on the control interface */
573         {       /* Huawei E392, E398 and possibly others sharing both device id and more... */
574                 USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 9),
575                 .driver_info        = (unsigned long)&qmi_wwan_info,
576         },
577         {       /* Vodafone/Huawei K5005 (12d1:14c8) and similar modems */
578                 USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 57),
579                 .driver_info        = (unsigned long)&qmi_wwan_info,
580         },
581         {       /* HUAWEI_INTERFACE_NDIS_CONTROL_QUALCOMM */
582                 USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 0x01, 0x69),
583                 .driver_info        = (unsigned long)&qmi_wwan_info,
584         },
585         {       /* Motorola Mapphone devices with MDM6600 */
586                 USB_VENDOR_AND_INTERFACE_INFO(0x22b8, USB_CLASS_VENDOR_SPEC, 0xfb, 0xff),
587                 .driver_info        = (unsigned long)&qmi_wwan_info,
588         },
589
590         /* 2. Combined interface devices matching on class+protocol */
591         {       /* Huawei E367 and possibly others in "Windows mode" */
592                 USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 7),
593                 .driver_info        = (unsigned long)&qmi_wwan_info,
594         },
595         {       /* Huawei E392, E398 and possibly others in "Windows mode" */
596                 USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 17),
597                 .driver_info        = (unsigned long)&qmi_wwan_info,
598         },
599         {       /* HUAWEI_NDIS_SINGLE_INTERFACE_VDF */
600                 USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 0x01, 0x37),
601                 .driver_info        = (unsigned long)&qmi_wwan_info,
602         },
603         {       /* HUAWEI_INTERFACE_NDIS_HW_QUALCOMM */
604                 USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 0x01, 0x67),
605                 .driver_info        = (unsigned long)&qmi_wwan_info,
606         },
607         {       /* Pantech UML290, P4200 and more */
608                 USB_VENDOR_AND_INTERFACE_INFO(0x106c, USB_CLASS_VENDOR_SPEC, 0xf0, 0xff),
609                 .driver_info        = (unsigned long)&qmi_wwan_info,
610         },
611         {       /* Pantech UML290 - newer firmware */
612                 USB_VENDOR_AND_INTERFACE_INFO(0x106c, USB_CLASS_VENDOR_SPEC, 0xf1, 0xff),
613                 .driver_info        = (unsigned long)&qmi_wwan_info,
614         },
615         {       /* Novatel USB551L and MC551 */
616                 USB_DEVICE_AND_INTERFACE_INFO(0x1410, 0xb001,
617                                               USB_CLASS_COMM,
618                                               USB_CDC_SUBCLASS_ETHERNET,
619                                               USB_CDC_PROTO_NONE),
620                 .driver_info        = (unsigned long)&qmi_wwan_info,
621         },
622         {       /* Novatel E362 */
623                 USB_DEVICE_AND_INTERFACE_INFO(0x1410, 0x9010,
624                                               USB_CLASS_COMM,
625                                               USB_CDC_SUBCLASS_ETHERNET,
626                                               USB_CDC_PROTO_NONE),
627                 .driver_info        = (unsigned long)&qmi_wwan_info,
628         },
629         {       /* Novatel Expedite E371 */
630                 USB_DEVICE_AND_INTERFACE_INFO(0x1410, 0x9011,
631                                               USB_CLASS_COMM,
632                                               USB_CDC_SUBCLASS_ETHERNET,
633                                               USB_CDC_PROTO_NONE),
634                 .driver_info        = (unsigned long)&qmi_wwan_info,
635         },
636         {       /* Dell Wireless 5800 (Novatel E362) */
637                 USB_DEVICE_AND_INTERFACE_INFO(0x413C, 0x8195,
638                                               USB_CLASS_COMM,
639                                               USB_CDC_SUBCLASS_ETHERNET,
640                                               USB_CDC_PROTO_NONE),
641                 .driver_info        = (unsigned long)&qmi_wwan_info,
642         },
643         {       /* Dell Wireless 5800 V2 (Novatel E362) */
644                 USB_DEVICE_AND_INTERFACE_INFO(0x413C, 0x8196,
645                                               USB_CLASS_COMM,
646                                               USB_CDC_SUBCLASS_ETHERNET,
647                                               USB_CDC_PROTO_NONE),
648                 .driver_info        = (unsigned long)&qmi_wwan_info,
649         },
650         {       /* Dell Wireless 5804 (Novatel E371) */
651                 USB_DEVICE_AND_INTERFACE_INFO(0x413C, 0x819b,
652                                               USB_CLASS_COMM,
653                                               USB_CDC_SUBCLASS_ETHERNET,
654                                               USB_CDC_PROTO_NONE),
655                 .driver_info        = (unsigned long)&qmi_wwan_info,
656         },
657         {       /* ADU960S */
658                 USB_DEVICE_AND_INTERFACE_INFO(0x16d5, 0x650a,
659                                               USB_CLASS_COMM,
660                                               USB_CDC_SUBCLASS_ETHERNET,
661                                               USB_CDC_PROTO_NONE),
662                 .driver_info        = (unsigned long)&qmi_wwan_info,
663         },
664         {       /* HP lt2523 (Novatel E371) */
665                 USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0x421d,
666                                               USB_CLASS_COMM,
667                                               USB_CDC_SUBCLASS_ETHERNET,
668                                               USB_CDC_PROTO_NONE),
669                 .driver_info        = (unsigned long)&qmi_wwan_info,
670         },
671         {       /* HP lt4112 LTE/HSPA+ Gobi 4G Module (Huawei me906e) */
672                 USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0x581d, USB_CLASS_VENDOR_SPEC, 1, 7),
673                 .driver_info = (unsigned long)&qmi_wwan_info,
674         },
675
676         /* 3. Combined interface devices matching on interface number */
677         {QMI_FIXED_INTF(0x0408, 0xea42, 4)},    /* Yota / Megafon M100-1 */
678         {QMI_FIXED_INTF(0x05c6, 0x6001, 3)},    /* 4G LTE usb-modem U901 */
679         {QMI_FIXED_INTF(0x05c6, 0x7000, 0)},
680         {QMI_FIXED_INTF(0x05c6, 0x7001, 1)},
681         {QMI_FIXED_INTF(0x05c6, 0x7002, 1)},
682         {QMI_FIXED_INTF(0x05c6, 0x7101, 1)},
683         {QMI_FIXED_INTF(0x05c6, 0x7101, 2)},
684         {QMI_FIXED_INTF(0x05c6, 0x7101, 3)},
685         {QMI_FIXED_INTF(0x05c6, 0x7102, 1)},
686         {QMI_FIXED_INTF(0x05c6, 0x7102, 2)},
687         {QMI_FIXED_INTF(0x05c6, 0x7102, 3)},
688         {QMI_FIXED_INTF(0x05c6, 0x8000, 7)},
689         {QMI_FIXED_INTF(0x05c6, 0x8001, 6)},
690         {QMI_FIXED_INTF(0x05c6, 0x9000, 4)},
691         {QMI_FIXED_INTF(0x05c6, 0x9003, 4)},
692         {QMI_FIXED_INTF(0x05c6, 0x9005, 2)},
693         {QMI_FIXED_INTF(0x05c6, 0x900a, 4)},
694         {QMI_FIXED_INTF(0x05c6, 0x900b, 2)},
695         {QMI_FIXED_INTF(0x05c6, 0x900c, 4)},
696         {QMI_FIXED_INTF(0x05c6, 0x900c, 5)},
697         {QMI_FIXED_INTF(0x05c6, 0x900c, 6)},
698         {QMI_FIXED_INTF(0x05c6, 0x900d, 5)},
699         {QMI_FIXED_INTF(0x05c6, 0x900f, 3)},
700         {QMI_FIXED_INTF(0x05c6, 0x900f, 4)},
701         {QMI_FIXED_INTF(0x05c6, 0x900f, 5)},
702         {QMI_FIXED_INTF(0x05c6, 0x9010, 4)},
703         {QMI_FIXED_INTF(0x05c6, 0x9010, 5)},
704         {QMI_FIXED_INTF(0x05c6, 0x9011, 3)},
705         {QMI_FIXED_INTF(0x05c6, 0x9011, 4)},
706         {QMI_FIXED_INTF(0x05c6, 0x9021, 1)},
707         {QMI_FIXED_INTF(0x05c6, 0x9022, 2)},
708         {QMI_FIXED_INTF(0x05c6, 0x9025, 4)},    /* Alcatel-sbell ASB TL131 TDD LTE  (China Mobile) */
709         {QMI_FIXED_INTF(0x05c6, 0x9026, 3)},
710         {QMI_FIXED_INTF(0x05c6, 0x902e, 5)},
711         {QMI_FIXED_INTF(0x05c6, 0x9031, 5)},
712         {QMI_FIXED_INTF(0x05c6, 0x9032, 4)},
713         {QMI_FIXED_INTF(0x05c6, 0x9033, 3)},
714         {QMI_FIXED_INTF(0x05c6, 0x9033, 4)},
715         {QMI_FIXED_INTF(0x05c6, 0x9033, 5)},
716         {QMI_FIXED_INTF(0x05c6, 0x9033, 6)},
717         {QMI_FIXED_INTF(0x05c6, 0x9034, 3)},
718         {QMI_FIXED_INTF(0x05c6, 0x9034, 4)},
719         {QMI_FIXED_INTF(0x05c6, 0x9034, 5)},
720         {QMI_FIXED_INTF(0x05c6, 0x9034, 6)},
721         {QMI_FIXED_INTF(0x05c6, 0x9034, 7)},
722         {QMI_FIXED_INTF(0x05c6, 0x9035, 4)},
723         {QMI_FIXED_INTF(0x05c6, 0x9036, 3)},
724         {QMI_FIXED_INTF(0x05c6, 0x9037, 5)},
725         {QMI_FIXED_INTF(0x05c6, 0x9038, 4)},
726         {QMI_FIXED_INTF(0x05c6, 0x903b, 7)},
727         {QMI_FIXED_INTF(0x05c6, 0x903c, 6)},
728         {QMI_FIXED_INTF(0x05c6, 0x903d, 6)},
729         {QMI_FIXED_INTF(0x05c6, 0x903e, 5)},
730         {QMI_FIXED_INTF(0x05c6, 0x9043, 3)},
731         {QMI_FIXED_INTF(0x05c6, 0x9046, 3)},
732         {QMI_FIXED_INTF(0x05c6, 0x9046, 4)},
733         {QMI_FIXED_INTF(0x05c6, 0x9046, 5)},
734         {QMI_FIXED_INTF(0x05c6, 0x9047, 2)},
735         {QMI_FIXED_INTF(0x05c6, 0x9047, 3)},
736         {QMI_FIXED_INTF(0x05c6, 0x9047, 4)},
737         {QMI_FIXED_INTF(0x05c6, 0x9048, 4)},
738         {QMI_FIXED_INTF(0x05c6, 0x9048, 5)},
739         {QMI_FIXED_INTF(0x05c6, 0x9048, 6)},
740         {QMI_FIXED_INTF(0x05c6, 0x9048, 7)},
741         {QMI_FIXED_INTF(0x05c6, 0x9048, 8)},
742         {QMI_FIXED_INTF(0x05c6, 0x904c, 5)},
743         {QMI_FIXED_INTF(0x05c6, 0x904c, 6)},
744         {QMI_FIXED_INTF(0x05c6, 0x904c, 7)},
745         {QMI_FIXED_INTF(0x05c6, 0x904c, 8)},
746         {QMI_FIXED_INTF(0x05c6, 0x9050, 3)},
747         {QMI_FIXED_INTF(0x05c6, 0x9052, 4)},
748         {QMI_FIXED_INTF(0x05c6, 0x9053, 6)},
749         {QMI_FIXED_INTF(0x05c6, 0x9053, 7)},
750         {QMI_FIXED_INTF(0x05c6, 0x9054, 5)},
751         {QMI_FIXED_INTF(0x05c6, 0x9054, 6)},
752         {QMI_FIXED_INTF(0x05c6, 0x9055, 3)},
753         {QMI_FIXED_INTF(0x05c6, 0x9055, 4)},
754         {QMI_FIXED_INTF(0x05c6, 0x9055, 5)},
755         {QMI_FIXED_INTF(0x05c6, 0x9055, 6)},
756         {QMI_FIXED_INTF(0x05c6, 0x9055, 7)},
757         {QMI_FIXED_INTF(0x05c6, 0x9056, 3)},
758         {QMI_FIXED_INTF(0x05c6, 0x9062, 2)},
759         {QMI_FIXED_INTF(0x05c6, 0x9062, 3)},
760         {QMI_FIXED_INTF(0x05c6, 0x9062, 4)},
761         {QMI_FIXED_INTF(0x05c6, 0x9062, 5)},
762         {QMI_FIXED_INTF(0x05c6, 0x9062, 6)},
763         {QMI_FIXED_INTF(0x05c6, 0x9062, 7)},
764         {QMI_FIXED_INTF(0x05c6, 0x9062, 8)},
765         {QMI_FIXED_INTF(0x05c6, 0x9062, 9)},
766         {QMI_FIXED_INTF(0x05c6, 0x9064, 3)},
767         {QMI_FIXED_INTF(0x05c6, 0x9065, 6)},
768         {QMI_FIXED_INTF(0x05c6, 0x9065, 7)},
769         {QMI_FIXED_INTF(0x05c6, 0x9066, 5)},
770         {QMI_FIXED_INTF(0x05c6, 0x9066, 6)},
771         {QMI_FIXED_INTF(0x05c6, 0x9067, 1)},
772         {QMI_FIXED_INTF(0x05c6, 0x9068, 2)},
773         {QMI_FIXED_INTF(0x05c6, 0x9068, 3)},
774         {QMI_FIXED_INTF(0x05c6, 0x9068, 4)},
775         {QMI_FIXED_INTF(0x05c6, 0x9068, 5)},
776         {QMI_FIXED_INTF(0x05c6, 0x9068, 6)},
777         {QMI_FIXED_INTF(0x05c6, 0x9068, 7)},
778         {QMI_FIXED_INTF(0x05c6, 0x9069, 5)},
779         {QMI_FIXED_INTF(0x05c6, 0x9069, 6)},
780         {QMI_FIXED_INTF(0x05c6, 0x9069, 7)},
781         {QMI_FIXED_INTF(0x05c6, 0x9069, 8)},
782         {QMI_FIXED_INTF(0x05c6, 0x9070, 4)},
783         {QMI_FIXED_INTF(0x05c6, 0x9070, 5)},
784         {QMI_FIXED_INTF(0x05c6, 0x9075, 5)},
785         {QMI_FIXED_INTF(0x05c6, 0x9076, 4)},
786         {QMI_FIXED_INTF(0x05c6, 0x9076, 5)},
787         {QMI_FIXED_INTF(0x05c6, 0x9076, 6)},
788         {QMI_FIXED_INTF(0x05c6, 0x9076, 7)},
789         {QMI_FIXED_INTF(0x05c6, 0x9076, 8)},
790         {QMI_FIXED_INTF(0x05c6, 0x9077, 3)},
791         {QMI_FIXED_INTF(0x05c6, 0x9077, 4)},
792         {QMI_FIXED_INTF(0x05c6, 0x9077, 5)},
793         {QMI_FIXED_INTF(0x05c6, 0x9077, 6)},
794         {QMI_FIXED_INTF(0x05c6, 0x9078, 3)},
795         {QMI_FIXED_INTF(0x05c6, 0x9079, 4)},
796         {QMI_FIXED_INTF(0x05c6, 0x9079, 5)},
797         {QMI_FIXED_INTF(0x05c6, 0x9079, 6)},
798         {QMI_FIXED_INTF(0x05c6, 0x9079, 7)},
799         {QMI_FIXED_INTF(0x05c6, 0x9079, 8)},
800         {QMI_FIXED_INTF(0x05c6, 0x9080, 5)},
801         {QMI_FIXED_INTF(0x05c6, 0x9080, 6)},
802         {QMI_FIXED_INTF(0x05c6, 0x9080, 7)},
803         {QMI_FIXED_INTF(0x05c6, 0x9080, 8)},
804         {QMI_FIXED_INTF(0x05c6, 0x9083, 3)},
805         {QMI_FIXED_INTF(0x05c6, 0x9084, 4)},
806         {QMI_FIXED_INTF(0x05c6, 0x90b2, 3)},    /* ublox R410M */
807         {QMI_FIXED_INTF(0x05c6, 0x920d, 0)},
808         {QMI_FIXED_INTF(0x05c6, 0x920d, 5)},
809         {QMI_QUIRK_SET_DTR(0x05c6, 0x9625, 4)}, /* YUGA CLM920-NC5 */
810         {QMI_FIXED_INTF(0x0846, 0x68a2, 8)},
811         {QMI_FIXED_INTF(0x0846, 0x68d3, 8)},    /* Netgear Aircard 779S */
812         {QMI_FIXED_INTF(0x12d1, 0x140c, 1)},    /* Huawei E173 */
813         {QMI_FIXED_INTF(0x12d1, 0x14ac, 1)},    /* Huawei E1820 */
814         {QMI_FIXED_INTF(0x1435, 0xd181, 3)},    /* Wistron NeWeb D18Q1 */
815         {QMI_FIXED_INTF(0x1435, 0xd181, 4)},    /* Wistron NeWeb D18Q1 */
816         {QMI_FIXED_INTF(0x1435, 0xd181, 5)},    /* Wistron NeWeb D18Q1 */
817         {QMI_FIXED_INTF(0x16d8, 0x6003, 0)},    /* CMOTech 6003 */
818         {QMI_FIXED_INTF(0x16d8, 0x6007, 0)},    /* CMOTech CHE-628S */
819         {QMI_FIXED_INTF(0x16d8, 0x6008, 0)},    /* CMOTech CMU-301 */
820         {QMI_FIXED_INTF(0x16d8, 0x6280, 0)},    /* CMOTech CHU-628 */
821         {QMI_FIXED_INTF(0x16d8, 0x7001, 0)},    /* CMOTech CHU-720S */
822         {QMI_FIXED_INTF(0x16d8, 0x7002, 0)},    /* CMOTech 7002 */
823         {QMI_FIXED_INTF(0x16d8, 0x7003, 4)},    /* CMOTech CHU-629K */
824         {QMI_FIXED_INTF(0x16d8, 0x7004, 3)},    /* CMOTech 7004 */
825         {QMI_FIXED_INTF(0x16d8, 0x7006, 5)},    /* CMOTech CGU-629 */
826         {QMI_FIXED_INTF(0x16d8, 0x700a, 4)},    /* CMOTech CHU-629S */
827         {QMI_FIXED_INTF(0x16d8, 0x7211, 0)},    /* CMOTech CHU-720I */
828         {QMI_FIXED_INTF(0x16d8, 0x7212, 0)},    /* CMOTech 7212 */
829         {QMI_FIXED_INTF(0x16d8, 0x7213, 0)},    /* CMOTech 7213 */
830         {QMI_FIXED_INTF(0x16d8, 0x7251, 1)},    /* CMOTech 7251 */
831         {QMI_FIXED_INTF(0x16d8, 0x7252, 1)},    /* CMOTech 7252 */
832         {QMI_FIXED_INTF(0x16d8, 0x7253, 1)},    /* CMOTech 7253 */
833         {QMI_FIXED_INTF(0x19d2, 0x0002, 1)},
834         {QMI_FIXED_INTF(0x19d2, 0x0012, 1)},
835         {QMI_FIXED_INTF(0x19d2, 0x0017, 3)},
836         {QMI_FIXED_INTF(0x19d2, 0x0019, 3)},    /* ONDA MT689DC */
837         {QMI_FIXED_INTF(0x19d2, 0x0021, 4)},
838         {QMI_FIXED_INTF(0x19d2, 0x0025, 1)},
839         {QMI_FIXED_INTF(0x19d2, 0x0031, 4)},
840         {QMI_FIXED_INTF(0x19d2, 0x0042, 4)},
841         {QMI_FIXED_INTF(0x19d2, 0x0049, 5)},
842         {QMI_FIXED_INTF(0x19d2, 0x0052, 4)},
843         {QMI_FIXED_INTF(0x19d2, 0x0055, 1)},    /* ZTE (Vodafone) K3520-Z */
844         {QMI_FIXED_INTF(0x19d2, 0x0058, 4)},
845         {QMI_FIXED_INTF(0x19d2, 0x0063, 4)},    /* ZTE (Vodafone) K3565-Z */
846         {QMI_FIXED_INTF(0x19d2, 0x0104, 4)},    /* ZTE (Vodafone) K4505-Z */
847         {QMI_FIXED_INTF(0x19d2, 0x0113, 5)},
848         {QMI_FIXED_INTF(0x19d2, 0x0118, 5)},
849         {QMI_FIXED_INTF(0x19d2, 0x0121, 5)},
850         {QMI_FIXED_INTF(0x19d2, 0x0123, 4)},
851         {QMI_FIXED_INTF(0x19d2, 0x0124, 5)},
852         {QMI_FIXED_INTF(0x19d2, 0x0125, 6)},
853         {QMI_FIXED_INTF(0x19d2, 0x0126, 5)},
854         {QMI_FIXED_INTF(0x19d2, 0x0130, 1)},
855         {QMI_FIXED_INTF(0x19d2, 0x0133, 3)},
856         {QMI_FIXED_INTF(0x19d2, 0x0141, 5)},
857         {QMI_FIXED_INTF(0x19d2, 0x0157, 5)},    /* ZTE MF683 */
858         {QMI_FIXED_INTF(0x19d2, 0x0158, 3)},
859         {QMI_FIXED_INTF(0x19d2, 0x0167, 4)},    /* ZTE MF820D */
860         {QMI_FIXED_INTF(0x19d2, 0x0168, 4)},
861         {QMI_FIXED_INTF(0x19d2, 0x0176, 3)},
862         {QMI_FIXED_INTF(0x19d2, 0x0178, 3)},
863         {QMI_FIXED_INTF(0x19d2, 0x0191, 4)},    /* ZTE EuFi890 */
864         {QMI_FIXED_INTF(0x19d2, 0x0199, 1)},    /* ZTE MF820S */
865         {QMI_FIXED_INTF(0x19d2, 0x0200, 1)},
866         {QMI_FIXED_INTF(0x19d2, 0x0257, 3)},    /* ZTE MF821 */
867         {QMI_FIXED_INTF(0x19d2, 0x0265, 4)},    /* ONDA MT8205 4G LTE */
868         {QMI_FIXED_INTF(0x19d2, 0x0284, 4)},    /* ZTE MF880 */
869         {QMI_FIXED_INTF(0x19d2, 0x0326, 4)},    /* ZTE MF821D */
870         {QMI_FIXED_INTF(0x19d2, 0x0412, 4)},    /* Telewell TW-LTE 4G */
871         {QMI_FIXED_INTF(0x19d2, 0x1008, 4)},    /* ZTE (Vodafone) K3570-Z */
872         {QMI_FIXED_INTF(0x19d2, 0x1010, 4)},    /* ZTE (Vodafone) K3571-Z */
873         {QMI_FIXED_INTF(0x19d2, 0x1012, 4)},
874         {QMI_FIXED_INTF(0x19d2, 0x1018, 3)},    /* ZTE (Vodafone) K5006-Z */
875         {QMI_FIXED_INTF(0x19d2, 0x1021, 2)},
876         {QMI_FIXED_INTF(0x19d2, 0x1245, 4)},
877         {QMI_FIXED_INTF(0x19d2, 0x1247, 4)},
878         {QMI_FIXED_INTF(0x19d2, 0x1252, 4)},
879         {QMI_FIXED_INTF(0x19d2, 0x1254, 4)},
880         {QMI_FIXED_INTF(0x19d2, 0x1255, 3)},
881         {QMI_FIXED_INTF(0x19d2, 0x1255, 4)},
882         {QMI_FIXED_INTF(0x19d2, 0x1256, 4)},
883         {QMI_FIXED_INTF(0x19d2, 0x1270, 5)},    /* ZTE MF667 */
884         {QMI_FIXED_INTF(0x19d2, 0x1401, 2)},
885         {QMI_FIXED_INTF(0x19d2, 0x1402, 2)},    /* ZTE MF60 */
886         {QMI_FIXED_INTF(0x19d2, 0x1424, 2)},
887         {QMI_FIXED_INTF(0x19d2, 0x1425, 2)},
888         {QMI_FIXED_INTF(0x19d2, 0x1426, 2)},    /* ZTE MF91 */
889         {QMI_FIXED_INTF(0x19d2, 0x1428, 2)},    /* Telewell TW-LTE 4G v2 */
890         {QMI_FIXED_INTF(0x19d2, 0x2002, 4)},    /* ZTE (Vodafone) K3765-Z */
891         {QMI_FIXED_INTF(0x2001, 0x7e19, 4)},    /* D-Link DWM-221 B1 */
892         {QMI_FIXED_INTF(0x2001, 0x7e35, 4)},    /* D-Link DWM-222 */
893         {QMI_FIXED_INTF(0x2020, 0x2031, 4)},    /* Olicard 600 */
894         {QMI_FIXED_INTF(0x2020, 0x2033, 4)},    /* BroadMobi BM806U */
895         {QMI_FIXED_INTF(0x0f3d, 0x68a2, 8)},    /* Sierra Wireless MC7700 */
896         {QMI_FIXED_INTF(0x114f, 0x68a2, 8)},    /* Sierra Wireless MC7750 */
897         {QMI_FIXED_INTF(0x1199, 0x68a2, 8)},    /* Sierra Wireless MC7710 in QMI mode */
898         {QMI_FIXED_INTF(0x1199, 0x68a2, 19)},   /* Sierra Wireless MC7710 in QMI mode */
899         {QMI_QUIRK_SET_DTR(0x1199, 0x68c0, 8)}, /* Sierra Wireless MC7304/MC7354, WP76xx */
900         {QMI_QUIRK_SET_DTR(0x1199, 0x68c0, 10)},/* Sierra Wireless MC7304/MC7354 */
901         {QMI_FIXED_INTF(0x1199, 0x901c, 8)},    /* Sierra Wireless EM7700 */
902         {QMI_FIXED_INTF(0x1199, 0x901f, 8)},    /* Sierra Wireless EM7355 */
903         {QMI_FIXED_INTF(0x1199, 0x9041, 8)},    /* Sierra Wireless MC7305/MC7355 */
904         {QMI_FIXED_INTF(0x1199, 0x9041, 10)},   /* Sierra Wireless MC7305/MC7355 */
905         {QMI_FIXED_INTF(0x1199, 0x9051, 8)},    /* Netgear AirCard 340U */
906         {QMI_FIXED_INTF(0x1199, 0x9053, 8)},    /* Sierra Wireless Modem */
907         {QMI_FIXED_INTF(0x1199, 0x9054, 8)},    /* Sierra Wireless Modem */
908         {QMI_FIXED_INTF(0x1199, 0x9055, 8)},    /* Netgear AirCard 341U */
909         {QMI_FIXED_INTF(0x1199, 0x9056, 8)},    /* Sierra Wireless Modem */
910         {QMI_FIXED_INTF(0x1199, 0x9057, 8)},
911         {QMI_FIXED_INTF(0x1199, 0x9061, 8)},    /* Sierra Wireless Modem */
912         {QMI_FIXED_INTF(0x1199, 0x9071, 8)},    /* Sierra Wireless MC74xx */
913         {QMI_FIXED_INTF(0x1199, 0x9071, 10)},   /* Sierra Wireless MC74xx */
914         {QMI_FIXED_INTF(0x1199, 0x9079, 8)},    /* Sierra Wireless EM74xx */
915         {QMI_FIXED_INTF(0x1199, 0x9079, 10)},   /* Sierra Wireless EM74xx */
916         {QMI_FIXED_INTF(0x1199, 0x907b, 8)},    /* Sierra Wireless EM74xx */
917         {QMI_FIXED_INTF(0x1199, 0x907b, 10)},   /* Sierra Wireless EM74xx */
918         {QMI_FIXED_INTF(0x1199, 0x9091, 8)},    /* Sierra Wireless EM7565 */
919         {QMI_FIXED_INTF(0x1bbb, 0x011e, 4)},    /* Telekom Speedstick LTE II (Alcatel One Touch L100V LTE) */
920         {QMI_FIXED_INTF(0x1bbb, 0x0203, 2)},    /* Alcatel L800MA */
921         {QMI_FIXED_INTF(0x2357, 0x0201, 4)},    /* TP-LINK HSUPA Modem MA180 */
922         {QMI_FIXED_INTF(0x2357, 0x9000, 4)},    /* TP-LINK MA260 */
923         {QMI_QUIRK_SET_DTR(0x1bc7, 0x1040, 2)}, /* Telit LE922A */
924         {QMI_FIXED_INTF(0x1bc7, 0x1100, 3)},    /* Telit ME910 */
925         {QMI_FIXED_INTF(0x1bc7, 0x1101, 3)},    /* Telit ME910 dual modem */
926         {QMI_FIXED_INTF(0x1bc7, 0x1200, 5)},    /* Telit LE920 */
927         {QMI_FIXED_INTF(0x1bc7, 0x1201, 2)},    /* Telit LE920 */
928         {QMI_FIXED_INTF(0x1c9e, 0x9b01, 3)},    /* XS Stick W100-2 from 4G Systems */
929         {QMI_FIXED_INTF(0x0b3c, 0xc000, 4)},    /* Olivetti Olicard 100 */
930         {QMI_FIXED_INTF(0x0b3c, 0xc001, 4)},    /* Olivetti Olicard 120 */
931         {QMI_FIXED_INTF(0x0b3c, 0xc002, 4)},    /* Olivetti Olicard 140 */
932         {QMI_FIXED_INTF(0x0b3c, 0xc004, 6)},    /* Olivetti Olicard 155 */
933         {QMI_FIXED_INTF(0x0b3c, 0xc005, 6)},    /* Olivetti Olicard 200 */
934         {QMI_FIXED_INTF(0x0b3c, 0xc00a, 6)},    /* Olivetti Olicard 160 */
935         {QMI_FIXED_INTF(0x0b3c, 0xc00b, 4)},    /* Olivetti Olicard 500 */
936         {QMI_FIXED_INTF(0x1e2d, 0x0060, 4)},    /* Cinterion PLxx */
937         {QMI_FIXED_INTF(0x1e2d, 0x0053, 4)},    /* Cinterion PHxx,PXxx */
938         {QMI_FIXED_INTF(0x1e2d, 0x0063, 10)},   /* Cinterion ALASxx (1 RmNet) */
939         {QMI_FIXED_INTF(0x1e2d, 0x0082, 4)},    /* Cinterion PHxx,PXxx (2 RmNet) */
940         {QMI_FIXED_INTF(0x1e2d, 0x0082, 5)},    /* Cinterion PHxx,PXxx (2 RmNet) */
941         {QMI_FIXED_INTF(0x1e2d, 0x0083, 4)},    /* Cinterion PHxx,PXxx (1 RmNet + USB Audio)*/
942         {QMI_FIXED_INTF(0x413c, 0x81a2, 8)},    /* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */
943         {QMI_FIXED_INTF(0x413c, 0x81a3, 8)},    /* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */
944         {QMI_FIXED_INTF(0x413c, 0x81a4, 8)},    /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */
945         {QMI_FIXED_INTF(0x413c, 0x81a8, 8)},    /* Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card */
946         {QMI_FIXED_INTF(0x413c, 0x81a9, 8)},    /* Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card */
947         {QMI_FIXED_INTF(0x413c, 0x81b1, 8)},    /* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card */
948         {QMI_FIXED_INTF(0x413c, 0x81b3, 8)},    /* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card (rev3) */
949         {QMI_FIXED_INTF(0x413c, 0x81b6, 8)},    /* Dell Wireless 5811e */
950         {QMI_FIXED_INTF(0x413c, 0x81b6, 10)},   /* Dell Wireless 5811e */
951         {QMI_FIXED_INTF(0x413c, 0x81d7, 0)},    /* Dell Wireless 5821e */
952         {QMI_FIXED_INTF(0x03f0, 0x4e1d, 8)},    /* HP lt4111 LTE/EV-DO/HSPA+ Gobi 4G Module */
953         {QMI_FIXED_INTF(0x03f0, 0x9d1d, 1)},    /* HP lt4120 Snapdragon X5 LTE */
954         {QMI_FIXED_INTF(0x22de, 0x9061, 3)},    /* WeTelecom WPD-600N */
955         {QMI_QUIRK_SET_DTR(0x1e0e, 0x9001, 5)}, /* SIMCom 7100E, 7230E, 7600E ++ */
956         {QMI_QUIRK_SET_DTR(0x2c7c, 0x0125, 4)}, /* Quectel EC25, EC20 R2.0  Mini PCIe */
957         {QMI_QUIRK_SET_DTR(0x2c7c, 0x0121, 4)}, /* Quectel EC21 Mini PCIe */
958         {QMI_QUIRK_SET_DTR(0x2c7c, 0x0191, 4)}, /* Quectel EG91 */
959         {QMI_FIXED_INTF(0x2c7c, 0x0296, 4)},    /* Quectel BG96 */
960         {QMI_QUIRK_SET_DTR(0x2c7c, 0x0306, 4)}, /* Quectel EP06 Mini PCIe */
961
962         /* 4. Gobi 1000 devices */
963         {QMI_GOBI1K_DEVICE(0x05c6, 0x9212)},    /* Acer Gobi Modem Device */
964         {QMI_GOBI1K_DEVICE(0x03f0, 0x1f1d)},    /* HP un2400 Gobi Modem Device */
965         {QMI_GOBI1K_DEVICE(0x04da, 0x250d)},    /* Panasonic Gobi Modem device */
966         {QMI_GOBI1K_DEVICE(0x413c, 0x8172)},    /* Dell Gobi Modem device */
967         {QMI_GOBI1K_DEVICE(0x1410, 0xa001)},    /* Novatel/Verizon USB-1000 */
968         {QMI_GOBI1K_DEVICE(0x1410, 0xa002)},    /* Novatel Gobi Modem device */
969         {QMI_GOBI1K_DEVICE(0x1410, 0xa003)},    /* Novatel Gobi Modem device */
970         {QMI_GOBI1K_DEVICE(0x1410, 0xa004)},    /* Novatel Gobi Modem device */
971         {QMI_GOBI1K_DEVICE(0x1410, 0xa005)},    /* Novatel Gobi Modem device */
972         {QMI_GOBI1K_DEVICE(0x1410, 0xa006)},    /* Novatel Gobi Modem device */
973         {QMI_GOBI1K_DEVICE(0x1410, 0xa007)},    /* Novatel Gobi Modem device */
974         {QMI_GOBI1K_DEVICE(0x0b05, 0x1776)},    /* Asus Gobi Modem device */
975         {QMI_GOBI1K_DEVICE(0x19d2, 0xfff3)},    /* ONDA Gobi Modem device */
976         {QMI_GOBI1K_DEVICE(0x05c6, 0x9001)},    /* Generic Gobi Modem device */
977         {QMI_GOBI1K_DEVICE(0x05c6, 0x9002)},    /* Generic Gobi Modem device */
978         {QMI_GOBI1K_DEVICE(0x05c6, 0x9202)},    /* Generic Gobi Modem device */
979         {QMI_GOBI1K_DEVICE(0x05c6, 0x9203)},    /* Generic Gobi Modem device */
980         {QMI_GOBI1K_DEVICE(0x05c6, 0x9222)},    /* Generic Gobi Modem device */
981         {QMI_GOBI1K_DEVICE(0x05c6, 0x9009)},    /* Generic Gobi Modem device */
982
983         /* 5. Gobi 2000 and 3000 devices */
984         {QMI_GOBI_DEVICE(0x413c, 0x8186)},      /* Dell Gobi 2000 Modem device (N0218, VU936) */
985         {QMI_GOBI_DEVICE(0x413c, 0x8194)},      /* Dell Gobi 3000 Composite */
986         {QMI_GOBI_DEVICE(0x05c6, 0x920b)},      /* Generic Gobi 2000 Modem device */
987         {QMI_GOBI_DEVICE(0x05c6, 0x9225)},      /* Sony Gobi 2000 Modem device (N0279, VU730) */
988         {QMI_GOBI_DEVICE(0x05c6, 0x9245)},      /* Samsung Gobi 2000 Modem device (VL176) */
989         {QMI_GOBI_DEVICE(0x03f0, 0x251d)},      /* HP Gobi 2000 Modem device (VP412) */
990         {QMI_GOBI_DEVICE(0x05c6, 0x9215)},      /* Acer Gobi 2000 Modem device (VP413) */
991         {QMI_FIXED_INTF(0x05c6, 0x9215, 4)},    /* Quectel EC20 Mini PCIe */
992         {QMI_GOBI_DEVICE(0x05c6, 0x9265)},      /* Asus Gobi 2000 Modem device (VR305) */
993         {QMI_GOBI_DEVICE(0x05c6, 0x9235)},      /* Top Global Gobi 2000 Modem device (VR306) */
994         {QMI_GOBI_DEVICE(0x05c6, 0x9275)},      /* iRex Technologies Gobi 2000 Modem device (VR307) */
995         {QMI_GOBI_DEVICE(0x0af0, 0x8120)},      /* Option GTM681W */
996         {QMI_GOBI_DEVICE(0x1199, 0x68a5)},      /* Sierra Wireless Modem */
997         {QMI_GOBI_DEVICE(0x1199, 0x68a9)},      /* Sierra Wireless Modem */
998         {QMI_GOBI_DEVICE(0x1199, 0x9001)},      /* Sierra Wireless Gobi 2000 Modem device (VT773) */
999         {QMI_GOBI_DEVICE(0x1199, 0x9002)},      /* Sierra Wireless Gobi 2000 Modem device (VT773) */
1000         {QMI_GOBI_DEVICE(0x1199, 0x9003)},      /* Sierra Wireless Gobi 2000 Modem device (VT773) */
1001         {QMI_GOBI_DEVICE(0x1199, 0x9004)},      /* Sierra Wireless Gobi 2000 Modem device (VT773) */
1002         {QMI_GOBI_DEVICE(0x1199, 0x9005)},      /* Sierra Wireless Gobi 2000 Modem device (VT773) */
1003         {QMI_GOBI_DEVICE(0x1199, 0x9006)},      /* Sierra Wireless Gobi 2000 Modem device (VT773) */
1004         {QMI_GOBI_DEVICE(0x1199, 0x9007)},      /* Sierra Wireless Gobi 2000 Modem device (VT773) */
1005         {QMI_GOBI_DEVICE(0x1199, 0x9008)},      /* Sierra Wireless Gobi 2000 Modem device (VT773) */
1006         {QMI_GOBI_DEVICE(0x1199, 0x9009)},      /* Sierra Wireless Gobi 2000 Modem device (VT773) */
1007         {QMI_GOBI_DEVICE(0x1199, 0x900a)},      /* Sierra Wireless Gobi 2000 Modem device (VT773) */
1008         {QMI_GOBI_DEVICE(0x1199, 0x9011)},      /* Sierra Wireless Gobi 2000 Modem device (MC8305) */
1009         {QMI_GOBI_DEVICE(0x16d8, 0x8002)},      /* CMDTech Gobi 2000 Modem device (VU922) */
1010         {QMI_GOBI_DEVICE(0x05c6, 0x9205)},      /* Gobi 2000 Modem device */
1011         {QMI_GOBI_DEVICE(0x1199, 0x9013)},      /* Sierra Wireless Gobi 3000 Modem device (MC8355) */
1012         {QMI_GOBI_DEVICE(0x03f0, 0x371d)},      /* HP un2430 Mobile Broadband Module */
1013         {QMI_GOBI_DEVICE(0x1199, 0x9015)},      /* Sierra Wireless Gobi 3000 Modem device */
1014         {QMI_GOBI_DEVICE(0x1199, 0x9019)},      /* Sierra Wireless Gobi 3000 Modem device */
1015         {QMI_GOBI_DEVICE(0x1199, 0x901b)},      /* Sierra Wireless MC7770 */
1016         {QMI_GOBI_DEVICE(0x12d1, 0x14f1)},      /* Sony Gobi 3000 Composite */
1017         {QMI_GOBI_DEVICE(0x1410, 0xa021)},      /* Foxconn Gobi 3000 Modem device (Novatel E396) */
1018
1019         { }                                     /* END */
1020 };
1021 MODULE_DEVICE_TABLE(usb, products);
1022
1023 static bool quectel_ec20_detected(struct usb_interface *intf)
1024 {
1025         struct usb_device *dev = interface_to_usbdev(intf);
1026
1027         if (dev->actconfig &&
1028             le16_to_cpu(dev->descriptor.idVendor) == 0x05c6 &&
1029             le16_to_cpu(dev->descriptor.idProduct) == 0x9215 &&
1030             dev->actconfig->desc.bNumInterfaces == 5)
1031                 return true;
1032
1033         return false;
1034 }
1035
1036 static int qmi_wwan_probe(struct usb_interface *intf,
1037                           const struct usb_device_id *prod)
1038 {
1039         struct usb_device_id *id = (struct usb_device_id *)prod;
1040         struct usb_interface_descriptor *desc = &intf->cur_altsetting->desc;
1041
1042         /* Workaround to enable dynamic IDs.  This disables usbnet
1043          * blacklisting functionality.  Which, if required, can be
1044          * reimplemented here by using a magic "blacklist" value
1045          * instead of 0 in the static device id table
1046          */
1047         if (!id->driver_info) {
1048                 dev_dbg(&intf->dev, "setting defaults for dynamic device id\n");
1049                 id->driver_info = (unsigned long)&qmi_wwan_info;
1050         }
1051
1052         /* There are devices where the same interface number can be
1053          * configured as different functions. We should only bind to
1054          * vendor specific functions when matching on interface number
1055          */
1056         if (id->match_flags & USB_DEVICE_ID_MATCH_INT_NUMBER &&
1057             desc->bInterfaceClass != USB_CLASS_VENDOR_SPEC) {
1058                 dev_dbg(&intf->dev,
1059                         "Rejecting interface number match for class %02x\n",
1060                         desc->bInterfaceClass);
1061                 return -ENODEV;
1062         }
1063
1064         /* Quectel EC20 quirk where we've QMI on interface 4 instead of 0 */
1065         if (quectel_ec20_detected(intf) && desc->bInterfaceNumber == 0) {
1066                 dev_dbg(&intf->dev, "Quectel EC20 quirk, skipping interface 0\n");
1067                 return -ENODEV;
1068         }
1069
1070         return usbnet_probe(intf, id);
1071 }
1072
1073 static struct usb_driver qmi_wwan_driver = {
1074         .name                 = "qmi_wwan",
1075         .id_table             = products,
1076         .probe                = qmi_wwan_probe,
1077         .disconnect           = usbnet_disconnect,
1078         .suspend              = qmi_wwan_suspend,
1079         .resume               = qmi_wwan_resume,
1080         .reset_resume         = qmi_wwan_resume,
1081         .supports_autosuspend = 1,
1082         .disable_hub_initiated_lpm = 1,
1083 };
1084
1085 module_usb_driver(qmi_wwan_driver);
1086
1087 MODULE_AUTHOR("Bjørn Mork <bjorn@mork.no>");
1088 MODULE_DESCRIPTION("Qualcomm MSM Interface (QMI) WWAN driver");
1089 MODULE_LICENSE("GPL");