drivers/net/sungem_phy.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * PHY drivers for the sungem ethernet driver.
   4  *
   5  * This file could be shared with other drivers.
   6  *
   7  * (c) 2002-2007, Benjamin Herrenscmidt (benh@kernel.crashing.org)
   8  *
   9  * TODO:
  10  *  - Add support for PHYs that provide an IRQ line
  11  *  - Eventually moved the entire polling state machine in
  12  *    there (out of the eth driver), so that it can easily be
  13  *    skipped on PHYs that implement it in hardware.
  14  *  - On LXT971 & BCM5201, Apple uses some chip specific regs
  15  *    to read the link status. Figure out why and if it makes
  16  *    sense to do the same (magic aneg ?)
  17  *  - Apple has some additional power management code for some
  18  *    Broadcom PHYs that they "hide" from the OpenSource version
  19  *    of darwin, still need to reverse engineer that
  20  */
  21
  22
  23 #include <linux/module.h>
  24
  25 #include <linux/kernel.h>
  26 #include <linux/types.h>
  27 #include <linux/netdevice.h>
  28 #include <linux/etherdevice.h>
  29 #include <linux/mii.h>
  30 #include <linux/ethtool.h>
  31 #include <linux/delay.h>
  32
  33 #ifdef CONFIG_PPC_PMAC
  34 #include <asm/prom.h>
  35 #endif
  36
  37 #include <linux/sungem_phy.h>
  38
  39 /* Link modes of the BCM5400 PHY */
  40 static const int phy_BCM5400_link_table[8][3] = {
  41         { 0, 0, 0 },    /* No link */
  42         { 0, 0, 0 },    /* 10BT Half Duplex */
  43         { 1, 0, 0 },    /* 10BT Full Duplex */
  44         { 0, 1, 0 },    /* 100BT Half Duplex */
  45         { 0, 1, 0 },    /* 100BT Half Duplex */
  46         { 1, 1, 0 },    /* 100BT Full Duplex*/
  47         { 1, 0, 1 },    /* 1000BT */
  48         { 1, 0, 1 },    /* 1000BT */
  49 };
  50
  51 static inline int __sungem_phy_read(struct mii_phy* phy, int id, int reg)
  52 {
  53         return phy->mdio_read(phy->dev, id, reg);
  54 }
  55
  56 static inline void __sungem_phy_write(struct mii_phy* phy, int id, int reg, int val)
  57 {
  58         phy->mdio_write(phy->dev, id, reg, val);
  59 }
  60
  61 static inline int sungem_phy_read(struct mii_phy* phy, int reg)
  62 {
  63         return phy->mdio_read(phy->dev, phy->mii_id, reg);
  64 }
  65
  66 static inline void sungem_phy_write(struct mii_phy* phy, int reg, int val)
  67 {
  68         phy->mdio_write(phy->dev, phy->mii_id, reg, val);
  69 }
  70
  71 static int reset_one_mii_phy(struct mii_phy* phy, int phy_id)
  72 {
  73         u16 val;
  74         int limit = 10000;
  75
  76         val = __sungem_phy_read(phy, phy_id, MII_BMCR);
  77         val &= ~(BMCR_ISOLATE | BMCR_PDOWN);
  78         val |= BMCR_RESET;
  79         __sungem_phy_write(phy, phy_id, MII_BMCR, val);
  80
  81         udelay(100);
  82
  83         while (--limit) {
  84                 val = __sungem_phy_read(phy, phy_id, MII_BMCR);
  85                 if ((val & BMCR_RESET) == 0)
  86                         break;
  87                 udelay(10);
  88         }
  89         if ((val & BMCR_ISOLATE) && limit > 0)
  90                 __sungem_phy_write(phy, phy_id, MII_BMCR, val & ~BMCR_ISOLATE);
  91
  92         return limit <= 0;
  93 }
  94
  95 static int bcm5201_init(struct mii_phy* phy)
  96 {
  97         u16 data;
  98
  99         data = sungem_phy_read(phy, MII_BCM5201_MULTIPHY);
 100         data &= ~MII_BCM5201_MULTIPHY_SUPERISOLATE;
 101         sungem_phy_write(phy, MII_BCM5201_MULTIPHY, data);
 102
 103         sungem_phy_write(phy, MII_BCM5201_INTERRUPT, 0);
 104
 105         return 0;
 106 }
 107
 108 static int bcm5201_suspend(struct mii_phy* phy)
 109 {
 110         sungem_phy_write(phy, MII_BCM5201_INTERRUPT, 0);
 111         sungem_phy_write(phy, MII_BCM5201_MULTIPHY, MII_BCM5201_MULTIPHY_SUPERISOLATE);
 112
 113         return 0;
 114 }
 115
 116 static int bcm5221_init(struct mii_phy* phy)
 117 {
 118         u16 data;
 119
 120         data = sungem_phy_read(phy, MII_BCM5221_TEST);
 121         sungem_phy_write(phy, MII_BCM5221_TEST,
 122                 data | MII_BCM5221_TEST_ENABLE_SHADOWS);
 123
 124         data = sungem_phy_read(phy, MII_BCM5221_SHDOW_AUX_STAT2);
 125         sungem_phy_write(phy, MII_BCM5221_SHDOW_AUX_STAT2,
 126                 data | MII_BCM5221_SHDOW_AUX_STAT2_APD);
 127
 128         data = sungem_phy_read(phy, MII_BCM5221_SHDOW_AUX_MODE4);
 129         sungem_phy_write(phy, MII_BCM5221_SHDOW_AUX_MODE4,
 130                 data | MII_BCM5221_SHDOW_AUX_MODE4_CLKLOPWR);
 131
 132         data = sungem_phy_read(phy, MII_BCM5221_TEST);
 133         sungem_phy_write(phy, MII_BCM5221_TEST,
 134                 data & ~MII_BCM5221_TEST_ENABLE_SHADOWS);
 135
 136         return 0;
 137 }
 138
 139 static int bcm5221_suspend(struct mii_phy* phy)
 140 {
 141         u16 data;
 142
 143         data = sungem_phy_read(phy, MII_BCM5221_TEST);
 144         sungem_phy_write(phy, MII_BCM5221_TEST,
 145                 data | MII_BCM5221_TEST_ENABLE_SHADOWS);
 146
 147         data = sungem_phy_read(phy, MII_BCM5221_SHDOW_AUX_MODE4);
 148         sungem_phy_write(phy, MII_BCM5221_SHDOW_AUX_MODE4,
 149                   data | MII_BCM5221_SHDOW_AUX_MODE4_IDDQMODE);
 150
 151         return 0;
 152 }
 153
 154 static int bcm5241_init(struct mii_phy* phy)
 155 {
 156         u16 data;
 157
 158         data = sungem_phy_read(phy, MII_BCM5221_TEST);
 159         sungem_phy_write(phy, MII_BCM5221_TEST,
 160                 data | MII_BCM5221_TEST_ENABLE_SHADOWS);
 161
 162         data = sungem_phy_read(phy, MII_BCM5221_SHDOW_AUX_STAT2);
 163         sungem_phy_write(phy, MII_BCM5221_SHDOW_AUX_STAT2,
 164                 data | MII_BCM5221_SHDOW_AUX_STAT2_APD);
 165
 166         data = sungem_phy_read(phy, MII_BCM5221_SHDOW_AUX_MODE4);
 167         sungem_phy_write(phy, MII_BCM5221_SHDOW_AUX_MODE4,
 168                 data & ~MII_BCM5241_SHDOW_AUX_MODE4_STANDBYPWR);
 169
 170         data = sungem_phy_read(phy, MII_BCM5221_TEST);
 171         sungem_phy_write(phy, MII_BCM5221_TEST,
 172                 data & ~MII_BCM5221_TEST_ENABLE_SHADOWS);
 173
 174         return 0;
 175 }
 176
 177 static int bcm5241_suspend(struct mii_phy* phy)
 178 {
 179         u16 data;
 180
 181         data = sungem_phy_read(phy, MII_BCM5221_TEST);
 182         sungem_phy_write(phy, MII_BCM5221_TEST,
 183                 data | MII_BCM5221_TEST_ENABLE_SHADOWS);
 184
 185         data = sungem_phy_read(phy, MII_BCM5221_SHDOW_AUX_MODE4);
 186         sungem_phy_write(phy, MII_BCM5221_SHDOW_AUX_MODE4,
 187                   data | MII_BCM5241_SHDOW_AUX_MODE4_STANDBYPWR);
 188
 189         return 0;
 190 }
 191
 192 static int bcm5400_init(struct mii_phy* phy)
 193 {
 194         u16 data;
 195
 196         /* Configure for gigabit full duplex */
 197         data = sungem_phy_read(phy, MII_BCM5400_AUXCONTROL);
 198         data |= MII_BCM5400_AUXCONTROL_PWR10BASET;
 199         sungem_phy_write(phy, MII_BCM5400_AUXCONTROL, data);
 200
 201         data = sungem_phy_read(phy, MII_BCM5400_GB_CONTROL);
 202         data |= MII_BCM5400_GB_CONTROL_FULLDUPLEXCAP;
 203         sungem_phy_write(phy, MII_BCM5400_GB_CONTROL, data);
 204
 205         udelay(100);
 206
 207         /* Reset and configure cascaded 10/100 PHY */
 208         (void)reset_one_mii_phy(phy, 0x1f);
 209
 210         data = __sungem_phy_read(phy, 0x1f, MII_BCM5201_MULTIPHY);
 211         data |= MII_BCM5201_MULTIPHY_SERIALMODE;
 212         __sungem_phy_write(phy, 0x1f, MII_BCM5201_MULTIPHY, data);
 213
 214         data = sungem_phy_read(phy, MII_BCM5400_AUXCONTROL);
 215         data &= ~MII_BCM5400_AUXCONTROL_PWR10BASET;
 216         sungem_phy_write(phy, MII_BCM5400_AUXCONTROL, data);
 217
 218         return 0;
 219 }
 220
 221 static int bcm5400_suspend(struct mii_phy* phy)
 222 {
 223 #if 0 /* Commented out in Darwin... someone has those dawn docs ? */
 224         sungem_phy_write(phy, MII_BMCR, BMCR_PDOWN);
 225 #endif
 226         return 0;
 227 }
 228
 229 static int bcm5401_init(struct mii_phy* phy)
 230 {
 231         u16 data;
 232         int rev;
 233
 234         rev = sungem_phy_read(phy, MII_PHYSID2) & 0x000f;
 235         if (rev == 0 || rev == 3) {
 236                 /* Some revisions of 5401 appear to need this
 237                  * initialisation sequence to disable, according
 238                  * to OF, "tap power management"
 239                  *
 240                  * WARNING ! OF and Darwin don't agree on the
 241                  * register addresses. OF seem to interpret the
 242                  * register numbers below as decimal
 243                  *
 244                  * Note: This should (and does) match tg3_init_5401phy_dsp
 245                  *       in the tg3.c driver. -DaveM
 246                  */
 247                 sungem_phy_write(phy, 0x18, 0x0c20);
 248                 sungem_phy_write(phy, 0x17, 0x0012);
 249                 sungem_phy_write(phy, 0x15, 0x1804);
 250                 sungem_phy_write(phy, 0x17, 0x0013);
 251                 sungem_phy_write(phy, 0x15, 0x1204);
 252                 sungem_phy_write(phy, 0x17, 0x8006);
 253                 sungem_phy_write(phy, 0x15, 0x0132);
 254                 sungem_phy_write(phy, 0x17, 0x8006);
 255                 sungem_phy_write(phy, 0x15, 0x0232);
 256                 sungem_phy_write(phy, 0x17, 0x201f);
 257                 sungem_phy_write(phy, 0x15, 0x0a20);
 258         }
 259
 260         /* Configure for gigabit full duplex */
 261         data = sungem_phy_read(phy, MII_BCM5400_GB_CONTROL);
 262         data |= MII_BCM5400_GB_CONTROL_FULLDUPLEXCAP;
 263         sungem_phy_write(phy, MII_BCM5400_GB_CONTROL, data);
 264
 265         udelay(10);
 266
 267         /* Reset and configure cascaded 10/100 PHY */
 268         (void)reset_one_mii_phy(phy, 0x1f);
 269
 270         data = __sungem_phy_read(phy, 0x1f, MII_BCM5201_MULTIPHY);
 271         data |= MII_BCM5201_MULTIPHY_SERIALMODE;
 272         __sungem_phy_write(phy, 0x1f, MII_BCM5201_MULTIPHY, data);
 273
 274         return 0;
 275 }
 276
 277 static int bcm5401_suspend(struct mii_phy* phy)
 278 {
 279 #if 0 /* Commented out in Darwin... someone has those dawn docs ? */
 280         sungem_phy_write(phy, MII_BMCR, BMCR_PDOWN);
 281 #endif
 282         return 0;
 283 }
 284
 285 static int bcm5411_init(struct mii_phy* phy)
 286 {
 287         u16 data;
 288
 289         /* Here's some more Apple black magic to setup
 290          * some voltage stuffs.
 291          */
 292         sungem_phy_write(phy, 0x1c, 0x8c23);
 293         sungem_phy_write(phy, 0x1c, 0x8ca3);
 294         sungem_phy_write(phy, 0x1c, 0x8c23);
 295
 296         /* Here, Apple seems to want to reset it, do
 297          * it as well
 298          */
 299         sungem_phy_write(phy, MII_BMCR, BMCR_RESET);
 300         sungem_phy_write(phy, MII_BMCR, 0x1340);
 301
 302         data = sungem_phy_read(phy, MII_BCM5400_GB_CONTROL);
 303         data |= MII_BCM5400_GB_CONTROL_FULLDUPLEXCAP;
 304         sungem_phy_write(phy, MII_BCM5400_GB_CONTROL, data);
 305
 306         udelay(10);
 307
 308         /* Reset and configure cascaded 10/100 PHY */
 309         (void)reset_one_mii_phy(phy, 0x1f);
 310
 311         return 0;
 312 }
 313
 314 static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise)
 315 {
 316         u16 ctl, adv;
 317
 318         phy->autoneg = 1;
 319         phy->speed = SPEED_10;
 320         phy->duplex = DUPLEX_HALF;
 321         phy->pause = 0;
 322         phy->advertising = advertise;
 323
 324         /* Setup standard advertise */
 325         adv = sungem_phy_read(phy, MII_ADVERTISE);
 326         adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
 327         if (advertise & ADVERTISED_10baseT_Half)
 328                 adv |= ADVERTISE_10HALF;
 329         if (advertise & ADVERTISED_10baseT_Full)
 330                 adv |= ADVERTISE_10FULL;
 331         if (advertise & ADVERTISED_100baseT_Half)
 332                 adv |= ADVERTISE_100HALF;
 333         if (advertise & ADVERTISED_100baseT_Full)
 334                 adv |= ADVERTISE_100FULL;
 335         sungem_phy_write(phy, MII_ADVERTISE, adv);
 336
 337         /* Start/Restart aneg */
 338         ctl = sungem_phy_read(phy, MII_BMCR);
 339         ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
 340         sungem_phy_write(phy, MII_BMCR, ctl);
 341
 342         return 0;
 343 }
 344
 345 static int genmii_setup_forced(struct mii_phy *phy, int speed, int fd)
 346 {
 347         u16 ctl;
 348
 349         phy->autoneg = 0;
 350         phy->speed = speed;
 351         phy->duplex = fd;
 352         phy->pause = 0;
 353
 354         ctl = sungem_phy_read(phy, MII_BMCR);
 355         ctl &= ~(BMCR_FULLDPLX|BMCR_SPEED100|BMCR_ANENABLE);
 356
 357         /* First reset the PHY */
 358         sungem_phy_write(phy, MII_BMCR, ctl | BMCR_RESET);
 359
 360         /* Select speed & duplex */
 361         switch(speed) {
 362         case SPEED_10:
 363                 break;
 364         case SPEED_100:
 365                 ctl |= BMCR_SPEED100;
 366                 break;
 367         case SPEED_1000:
 368         default:
 369                 return -EINVAL;
 370         }
 371         if (fd == DUPLEX_FULL)
 372                 ctl |= BMCR_FULLDPLX;
 373         sungem_phy_write(phy, MII_BMCR, ctl);
 374
 375         return 0;
 376 }
 377
 378 static int genmii_poll_link(struct mii_phy *phy)
 379 {
 380         u16 status;
 381
 382         (void)sungem_phy_read(phy, MII_BMSR);
 383         status = sungem_phy_read(phy, MII_BMSR);
 384         if ((status & BMSR_LSTATUS) == 0)
 385                 return 0;
 386         if (phy->autoneg && !(status & BMSR_ANEGCOMPLETE))
 387                 return 0;
 388         return 1;
 389 }
 390
 391 static int genmii_read_link(struct mii_phy *phy)
 392 {
 393         u16 lpa;
 394
 395         if (phy->autoneg) {
 396                 lpa = sungem_phy_read(phy, MII_LPA);
 397
 398                 if (lpa & (LPA_10FULL | LPA_100FULL))
 399                         phy->duplex = DUPLEX_FULL;
 400                 else
 401                         phy->duplex = DUPLEX_HALF;
 402                 if (lpa & (LPA_100FULL | LPA_100HALF))
 403                         phy->speed = SPEED_100;
 404                 else
 405                         phy->speed = SPEED_10;
 406                 phy->pause = 0;
 407         }
 408         /* On non-aneg, we assume what we put in BMCR is the speed,
 409          * though magic-aneg shouldn't prevent this case from occurring
 410          */
 411
 412          return 0;
 413 }
 414
 415 static int generic_suspend(struct mii_phy* phy)
 416 {
 417         sungem_phy_write(phy, MII_BMCR, BMCR_PDOWN);
 418
 419         return 0;
 420 }
 421
 422 static int bcm5421_init(struct mii_phy* phy)
 423 {
 424         u16 data;
 425         unsigned int id;
 426
 427         id = (sungem_phy_read(phy, MII_PHYSID1) << 16 | sungem_phy_read(phy, MII_PHYSID2));
 428
 429         /* Revision 0 of 5421 needs some fixups */
 430         if (id == 0x002060e0) {
 431                 /* This is borrowed from MacOS
 432                  */
 433                 sungem_phy_write(phy, 0x18, 0x1007);
 434                 data = sungem_phy_read(phy, 0x18);
 435                 sungem_phy_write(phy, 0x18, data | 0x0400);
 436                 sungem_phy_write(phy, 0x18, 0x0007);
 437                 data = sungem_phy_read(phy, 0x18);
 438                 sungem_phy_write(phy, 0x18, data | 0x0800);
 439                 sungem_phy_write(phy, 0x17, 0x000a);
 440                 data = sungem_phy_read(phy, 0x15);
 441                 sungem_phy_write(phy, 0x15, data | 0x0200);
 442         }
 443
 444         /* Pick up some init code from OF for K2 version */
 445         if ((id & 0xfffffff0) == 0x002062e0) {
 446                 sungem_phy_write(phy, 4, 0x01e1);
 447                 sungem_phy_write(phy, 9, 0x0300);
 448         }
 449
 450         /* Check if we can enable automatic low power */
 451 #ifdef CONFIG_PPC_PMAC
 452         if (phy->platform_data) {
 453                 struct device_node *np = of_get_parent(phy->platform_data);
 454                 int can_low_power = 1;
 455                 if (np == NULL || of_get_property(np, "no-autolowpower", NULL))
 456                         can_low_power = 0;
 457                 if (can_low_power) {
 458                         /* Enable automatic low-power */
 459                         sungem_phy_write(phy, 0x1c, 0x9002);
 460                         sungem_phy_write(phy, 0x1c, 0xa821);
 461                         sungem_phy_write(phy, 0x1c, 0x941d);
 462                 }
 463         }
 464 #endif /* CONFIG_PPC_PMAC */
 465
 466         return 0;
 467 }
 468
 469 static int bcm54xx_setup_aneg(struct mii_phy *phy, u32 advertise)
 470 {
 471         u16 ctl, adv;
 472
 473         phy->autoneg = 1;
 474         phy->speed = SPEED_10;
 475         phy->duplex = DUPLEX_HALF;
 476         phy->pause = 0;
 477         phy->advertising = advertise;
 478
 479         /* Setup standard advertise */
 480         adv = sungem_phy_read(phy, MII_ADVERTISE);
 481         adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
 482         if (advertise & ADVERTISED_10baseT_Half)
 483                 adv |= ADVERTISE_10HALF;
 484         if (advertise & ADVERTISED_10baseT_Full)
 485                 adv |= ADVERTISE_10FULL;
 486         if (advertise & ADVERTISED_100baseT_Half)
 487                 adv |= ADVERTISE_100HALF;
 488         if (advertise & ADVERTISED_100baseT_Full)
 489                 adv |= ADVERTISE_100FULL;
 490         if (advertise & ADVERTISED_Pause)
 491                 adv |= ADVERTISE_PAUSE_CAP;
 492         if (advertise & ADVERTISED_Asym_Pause)
 493                 adv |= ADVERTISE_PAUSE_ASYM;
 494         sungem_phy_write(phy, MII_ADVERTISE, adv);
 495
 496         /* Setup 1000BT advertise */
 497         adv = sungem_phy_read(phy, MII_1000BASETCONTROL);
 498         adv &= ~(MII_1000BASETCONTROL_FULLDUPLEXCAP|MII_1000BASETCONTROL_HALFDUPLEXCAP);
 499         if (advertise & SUPPORTED_1000baseT_Half)
 500                 adv |= MII_1000BASETCONTROL_HALFDUPLEXCAP;
 501         if (advertise & SUPPORTED_1000baseT_Full)
 502                 adv |= MII_1000BASETCONTROL_FULLDUPLEXCAP;
 503         sungem_phy_write(phy, MII_1000BASETCONTROL, adv);
 504
 505         /* Start/Restart aneg */
 506         ctl = sungem_phy_read(phy, MII_BMCR);
 507         ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
 508         sungem_phy_write(phy, MII_BMCR, ctl);
 509
 510         return 0;
 511 }
 512
 513 static int bcm54xx_setup_forced(struct mii_phy *phy, int speed, int fd)
 514 {
 515         u16 ctl;
 516
 517         phy->autoneg = 0;
 518         phy->speed = speed;
 519         phy->duplex = fd;
 520         phy->pause = 0;
 521
 522         ctl = sungem_phy_read(phy, MII_BMCR);
 523         ctl &= ~(BMCR_FULLDPLX|BMCR_SPEED100|BMCR_SPD2|BMCR_ANENABLE);
 524
 525         /* First reset the PHY */
 526         sungem_phy_write(phy, MII_BMCR, ctl | BMCR_RESET);
 527
 528         /* Select speed & duplex */
 529         switch(speed) {
 530         case SPEED_10:
 531                 break;
 532         case SPEED_100:
 533                 ctl |= BMCR_SPEED100;
 534                 break;
 535         case SPEED_1000:
 536                 ctl |= BMCR_SPD2;
 537         }
 538         if (fd == DUPLEX_FULL)
 539                 ctl |= BMCR_FULLDPLX;
 540
 541         // XXX Should we set the sungem to GII now on 1000BT ?
 542
 543         sungem_phy_write(phy, MII_BMCR, ctl);
 544
 545         return 0;
 546 }
 547
 548 static int bcm54xx_read_link(struct mii_phy *phy)
 549 {
 550         int link_mode;
 551         u16 val;
 552
 553         if (phy->autoneg) {
 554                 val = sungem_phy_read(phy, MII_BCM5400_AUXSTATUS);
 555                 link_mode = ((val & MII_BCM5400_AUXSTATUS_LINKMODE_MASK) >>
 556                              MII_BCM5400_AUXSTATUS_LINKMODE_SHIFT);
 557                 phy->duplex = phy_BCM5400_link_table[link_mode][0] ?
 558                         DUPLEX_FULL : DUPLEX_HALF;
 559                 phy->speed = phy_BCM5400_link_table[link_mode][2] ?
 560                                 SPEED_1000 :
 561                                 (phy_BCM5400_link_table[link_mode][1] ?
 562                                  SPEED_100 : SPEED_10);
 563                 val = sungem_phy_read(phy, MII_LPA);
 564                 phy->pause = (phy->duplex == DUPLEX_FULL) &&
 565                         ((val & LPA_PAUSE) != 0);
 566         }
 567         /* On non-aneg, we assume what we put in BMCR is the speed,
 568          * though magic-aneg shouldn't prevent this case from occurring
 569          */
 570
 571         return 0;
 572 }
 573
 574 static int marvell88e1111_init(struct mii_phy* phy)
 575 {
 576         u16 rev;
 577
 578         /* magic init sequence for rev 0 */
 579         rev = sungem_phy_read(phy, MII_PHYSID2) & 0x000f;
 580         if (rev == 0) {
 581                 sungem_phy_write(phy, 0x1d, 0x000a);
 582                 sungem_phy_write(phy, 0x1e, 0x0821);
 583
 584                 sungem_phy_write(phy, 0x1d, 0x0006);
 585                 sungem_phy_write(phy, 0x1e, 0x8600);
 586
 587                 sungem_phy_write(phy, 0x1d, 0x000b);
 588                 sungem_phy_write(phy, 0x1e, 0x0100);
 589
 590                 sungem_phy_write(phy, 0x1d, 0x0004);
 591                 sungem_phy_write(phy, 0x1e, 0x4850);
 592         }
 593         return 0;
 594 }
 595
 596 #define BCM5421_MODE_MASK       (1 << 5)
 597
 598 static int bcm5421_poll_link(struct mii_phy* phy)
 599 {
 600         u32 phy_reg;
 601         int mode;
 602
 603         /* find out in what mode we are */
 604         sungem_phy_write(phy, MII_NCONFIG, 0x1000);
 605         phy_reg = sungem_phy_read(phy, MII_NCONFIG);
 606
 607         mode = (phy_reg & BCM5421_MODE_MASK) >> 5;
 608
 609         if ( mode == BCM54XX_COPPER)
 610                 return genmii_poll_link(phy);
 611
 612         /* try to find out whether we have a link */
 613         sungem_phy_write(phy, MII_NCONFIG, 0x2000);
 614         phy_reg = sungem_phy_read(phy, MII_NCONFIG);
 615
 616         if (phy_reg & 0x0020)
 617                 return 0;
 618         else
 619                 return 1;
 620 }
 621
 622 static int bcm5421_read_link(struct mii_phy* phy)
 623 {
 624         u32 phy_reg;
 625         int mode;
 626
 627         /* find out in what mode we are */
 628         sungem_phy_write(phy, MII_NCONFIG, 0x1000);
 629         phy_reg = sungem_phy_read(phy, MII_NCONFIG);
 630
 631         mode = (phy_reg & BCM5421_MODE_MASK ) >> 5;
 632
 633         if ( mode == BCM54XX_COPPER)
 634                 return bcm54xx_read_link(phy);
 635
 636         phy->speed = SPEED_1000;
 637
 638         /* find out whether we are running half- or full duplex */
 639         sungem_phy_write(phy, MII_NCONFIG, 0x2000);
 640         phy_reg = sungem_phy_read(phy, MII_NCONFIG);
 641
 642         if ( (phy_reg & 0x0080) >> 7)
 643                 phy->duplex |=  DUPLEX_HALF;
 644         else
 645                 phy->duplex |=  DUPLEX_FULL;
 646
 647         return 0;
 648 }
 649
 650 static int bcm5421_enable_fiber(struct mii_phy* phy, int autoneg)
 651 {
 652         /* enable fiber mode */
 653         sungem_phy_write(phy, MII_NCONFIG, 0x9020);
 654         /* LEDs active in both modes, autosense prio = fiber */
 655         sungem_phy_write(phy, MII_NCONFIG, 0x945f);
 656
 657         if (!autoneg) {
 658                 /* switch off fibre autoneg */
 659                 sungem_phy_write(phy, MII_NCONFIG, 0xfc01);
 660                 sungem_phy_write(phy, 0x0b, 0x0004);
 661         }
 662
 663         phy->autoneg = autoneg;
 664
 665         return 0;
 666 }
 667
 668 #define BCM5461_FIBER_LINK      (1 << 2)
 669 #define BCM5461_MODE_MASK       (3 << 1)
 670
 671 static int bcm5461_poll_link(struct mii_phy* phy)
 672 {
 673         u32 phy_reg;
 674         int mode;
 675
 676         /* find out in what mode we are */
 677         sungem_phy_write(phy, MII_NCONFIG, 0x7c00);
 678         phy_reg = sungem_phy_read(phy, MII_NCONFIG);
 679
 680         mode = (phy_reg & BCM5461_MODE_MASK ) >> 1;
 681
 682         if ( mode == BCM54XX_COPPER)
 683                 return genmii_poll_link(phy);
 684
 685         /* find out whether we have a link */
 686         sungem_phy_write(phy, MII_NCONFIG, 0x7000);
 687         phy_reg = sungem_phy_read(phy, MII_NCONFIG);
 688
 689         if (phy_reg & BCM5461_FIBER_LINK)
 690                 return 1;
 691         else
 692                 return 0;
 693 }
 694
 695 #define BCM5461_FIBER_DUPLEX    (1 << 3)
 696
 697 static int bcm5461_read_link(struct mii_phy* phy)
 698 {
 699         u32 phy_reg;
 700         int mode;
 701
 702         /* find out in what mode we are */
 703         sungem_phy_write(phy, MII_NCONFIG, 0x7c00);
 704         phy_reg = sungem_phy_read(phy, MII_NCONFIG);
 705
 706         mode = (phy_reg & BCM5461_MODE_MASK ) >> 1;
 707
 708         if ( mode == BCM54XX_COPPER) {
 709                 return bcm54xx_read_link(phy);
 710         }
 711
 712         phy->speed = SPEED_1000;
 713
 714         /* find out whether we are running half- or full duplex */
 715         sungem_phy_write(phy, MII_NCONFIG, 0x7000);
 716         phy_reg = sungem_phy_read(phy, MII_NCONFIG);
 717
 718         if (phy_reg & BCM5461_FIBER_DUPLEX)
 719                 phy->duplex |=  DUPLEX_FULL;
 720         else
 721                 phy->duplex |=  DUPLEX_HALF;
 722
 723         return 0;
 724 }
 725
 726 static int bcm5461_enable_fiber(struct mii_phy* phy, int autoneg)
 727 {
 728         /* select fiber mode, enable 1000 base-X registers */
 729         sungem_phy_write(phy, MII_NCONFIG, 0xfc0b);
 730
 731         if (autoneg) {
 732                 /* enable fiber with no autonegotiation */
 733                 sungem_phy_write(phy, MII_ADVERTISE, 0x01e0);
 734                 sungem_phy_write(phy, MII_BMCR, 0x1140);
 735         } else {
 736                 /* enable fiber with autonegotiation */
 737                 sungem_phy_write(phy, MII_BMCR, 0x0140);
 738         }
 739
 740         phy->autoneg = autoneg;
 741
 742         return 0;
 743 }
 744
 745 static int marvell_setup_aneg(struct mii_phy *phy, u32 advertise)
 746 {
 747         u16 ctl, adv;
 748
 749         phy->autoneg = 1;
 750         phy->speed = SPEED_10;
 751         phy->duplex = DUPLEX_HALF;
 752         phy->pause = 0;
 753         phy->advertising = advertise;
 754
 755         /* Setup standard advertise */
 756         adv = sungem_phy_read(phy, MII_ADVERTISE);
 757         adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
 758         if (advertise & ADVERTISED_10baseT_Half)
 759                 adv |= ADVERTISE_10HALF;
 760         if (advertise & ADVERTISED_10baseT_Full)
 761                 adv |= ADVERTISE_10FULL;
 762         if (advertise & ADVERTISED_100baseT_Half)
 763                 adv |= ADVERTISE_100HALF;
 764         if (advertise & ADVERTISED_100baseT_Full)
 765                 adv |= ADVERTISE_100FULL;
 766         if (advertise & ADVERTISED_Pause)
 767                 adv |= ADVERTISE_PAUSE_CAP;
 768         if (advertise & ADVERTISED_Asym_Pause)
 769                 adv |= ADVERTISE_PAUSE_ASYM;
 770         sungem_phy_write(phy, MII_ADVERTISE, adv);
 771
 772         /* Setup 1000BT advertise & enable crossover detect
 773          * XXX How do we advertise 1000BT ? Darwin source is
 774          * confusing here, they read from specific control and
 775          * write to control... Someone has specs for those
 776          * beasts ?
 777          */
 778         adv = sungem_phy_read(phy, MII_M1011_PHY_SPEC_CONTROL);
 779         adv |= MII_M1011_PHY_SPEC_CONTROL_AUTO_MDIX;
 780         adv &= ~(MII_1000BASETCONTROL_FULLDUPLEXCAP |
 781                         MII_1000BASETCONTROL_HALFDUPLEXCAP);
 782         if (advertise & SUPPORTED_1000baseT_Half)
 783                 adv |= MII_1000BASETCONTROL_HALFDUPLEXCAP;
 784         if (advertise & SUPPORTED_1000baseT_Full)
 785                 adv |= MII_1000BASETCONTROL_FULLDUPLEXCAP;
 786         sungem_phy_write(phy, MII_1000BASETCONTROL, adv);
 787
 788         /* Start/Restart aneg */
 789         ctl = sungem_phy_read(phy, MII_BMCR);
 790         ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
 791         sungem_phy_write(phy, MII_BMCR, ctl);
 792
 793         return 0;
 794 }
 795
 796 static int marvell_setup_forced(struct mii_phy *phy, int speed, int fd)
 797 {
 798         u16 ctl, ctl2;
 799
 800         phy->autoneg = 0;
 801         phy->speed = speed;
 802         phy->duplex = fd;
 803         phy->pause = 0;
 804
 805         ctl = sungem_phy_read(phy, MII_BMCR);
 806         ctl &= ~(BMCR_FULLDPLX|BMCR_SPEED100|BMCR_SPD2|BMCR_ANENABLE);
 807         ctl |= BMCR_RESET;
 808
 809         /* Select speed & duplex */
 810         switch(speed) {
 811         case SPEED_10:
 812                 break;
 813         case SPEED_100:
 814                 ctl |= BMCR_SPEED100;
 815                 break;
 816         /* I'm not sure about the one below, again, Darwin source is
 817          * quite confusing and I lack chip specs
 818          */
 819         case SPEED_1000:
 820                 ctl |= BMCR_SPD2;
 821         }
 822         if (fd == DUPLEX_FULL)
 823                 ctl |= BMCR_FULLDPLX;
 824
 825         /* Disable crossover. Again, the way Apple does it is strange,
 826          * though I don't assume they are wrong ;)
 827          */
 828         ctl2 = sungem_phy_read(phy, MII_M1011_PHY_SPEC_CONTROL);
 829         ctl2 &= ~(MII_M1011_PHY_SPEC_CONTROL_MANUAL_MDIX |
 830                 MII_M1011_PHY_SPEC_CONTROL_AUTO_MDIX |
 831                 MII_1000BASETCONTROL_FULLDUPLEXCAP |
 832                 MII_1000BASETCONTROL_HALFDUPLEXCAP);
 833         if (speed == SPEED_1000)
 834                 ctl2 |= (fd == DUPLEX_FULL) ?
 835                         MII_1000BASETCONTROL_FULLDUPLEXCAP :
 836                         MII_1000BASETCONTROL_HALFDUPLEXCAP;
 837         sungem_phy_write(phy, MII_1000BASETCONTROL, ctl2);
 838
 839         // XXX Should we set the sungem to GII now on 1000BT ?
 840
 841         sungem_phy_write(phy, MII_BMCR, ctl);
 842
 843         return 0;
 844 }
 845
 846 static int marvell_read_link(struct mii_phy *phy)
 847 {
 848         u16 status, pmask;
 849
 850         if (phy->autoneg) {
 851                 status = sungem_phy_read(phy, MII_M1011_PHY_SPEC_STATUS);
 852                 if ((status & MII_M1011_PHY_SPEC_STATUS_RESOLVED) == 0)
 853                         return -EAGAIN;
 854                 if (status & MII_M1011_PHY_SPEC_STATUS_1000)
 855                         phy->speed = SPEED_1000;
 856                 else if (status & MII_M1011_PHY_SPEC_STATUS_100)
 857                         phy->speed = SPEED_100;
 858                 else
 859                         phy->speed = SPEED_10;
 860                 if (status & MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX)
 861                         phy->duplex = DUPLEX_FULL;
 862                 else
 863                         phy->duplex = DUPLEX_HALF;
 864                 pmask = MII_M1011_PHY_SPEC_STATUS_TX_PAUSE |
 865                         MII_M1011_PHY_SPEC_STATUS_RX_PAUSE;
 866                 phy->pause = (status & pmask) == pmask;
 867         }
 868         /* On non-aneg, we assume what we put in BMCR is the speed,
 869          * though magic-aneg shouldn't prevent this case from occurring
 870          */
 871
 872         return 0;
 873 }
 874
 875 #define MII_BASIC_FEATURES \
 876         (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |      \
 877          SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |    \
 878          SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII |     \
 879          SUPPORTED_Pause)
 880
 881 /* On gigabit capable PHYs, we advertise Pause support but not asym pause
 882  * support for now as I'm not sure it's supported and Darwin doesn't do
 883  * it neither. --BenH.
 884  */
 885 #define MII_GBIT_FEATURES \
 886         (MII_BASIC_FEATURES |   \
 887          SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full)
 888
 889 /* Broadcom BCM 5201 */
 890 static const struct mii_phy_ops bcm5201_phy_ops = {
 891         .init           = bcm5201_init,
 892         .suspend        = bcm5201_suspend,
 893         .setup_aneg     = genmii_setup_aneg,
 894         .setup_forced   = genmii_setup_forced,
 895         .poll_link      = genmii_poll_link,
 896         .read_link      = genmii_read_link,
 897 };
 898
 899 static struct mii_phy_def bcm5201_phy_def = {
 900         .phy_id         = 0x00406210,
 901         .phy_id_mask    = 0xfffffff0,
 902         .name           = "BCM5201",
 903         .features       = MII_BASIC_FEATURES,
 904         .magic_aneg     = 1,
 905         .ops            = &bcm5201_phy_ops
 906 };
 907
 908 /* Broadcom BCM 5221 */
 909 static const struct mii_phy_ops bcm5221_phy_ops = {
 910         .suspend        = bcm5221_suspend,
 911         .init           = bcm5221_init,
 912         .setup_aneg     = genmii_setup_aneg,
 913         .setup_forced   = genmii_setup_forced,
 914         .poll_link      = genmii_poll_link,
 915         .read_link      = genmii_read_link,
 916 };
 917
 918 static struct mii_phy_def bcm5221_phy_def = {
 919         .phy_id         = 0x004061e0,
 920         .phy_id_mask    = 0xfffffff0,
 921         .name           = "BCM5221",
 922         .features       = MII_BASIC_FEATURES,
 923         .magic_aneg     = 1,
 924         .ops            = &bcm5221_phy_ops
 925 };
 926
 927 /* Broadcom BCM 5241 */
 928 static const struct mii_phy_ops bcm5241_phy_ops = {
 929         .suspend        = bcm5241_suspend,
 930         .init           = bcm5241_init,
 931         .setup_aneg     = genmii_setup_aneg,
 932         .setup_forced   = genmii_setup_forced,
 933         .poll_link      = genmii_poll_link,
 934         .read_link      = genmii_read_link,
 935 };
 936 static struct mii_phy_def bcm5241_phy_def = {
 937         .phy_id         = 0x0143bc30,
 938         .phy_id_mask    = 0xfffffff0,
 939         .name           = "BCM5241",
 940         .features       = MII_BASIC_FEATURES,
 941         .magic_aneg     = 1,
 942         .ops            = &bcm5241_phy_ops
 943 };
 944
 945 /* Broadcom BCM 5400 */
 946 static const struct mii_phy_ops bcm5400_phy_ops = {
 947         .init           = bcm5400_init,
 948         .suspend        = bcm5400_suspend,
 949         .setup_aneg     = bcm54xx_setup_aneg,
 950         .setup_forced   = bcm54xx_setup_forced,
 951         .poll_link      = genmii_poll_link,
 952         .read_link      = bcm54xx_read_link,
 953 };
 954
 955 static struct mii_phy_def bcm5400_phy_def = {
 956         .phy_id         = 0x00206040,
 957         .phy_id_mask    = 0xfffffff0,
 958         .name           = "BCM5400",
 959         .features       = MII_GBIT_FEATURES,
 960         .magic_aneg     = 1,
 961         .ops            = &bcm5400_phy_ops
 962 };
 963
 964 /* Broadcom BCM 5401 */
 965 static const struct mii_phy_ops bcm5401_phy_ops = {
 966         .init           = bcm5401_init,
 967         .suspend        = bcm5401_suspend,
 968         .setup_aneg     = bcm54xx_setup_aneg,
 969         .setup_forced   = bcm54xx_setup_forced,
 970         .poll_link      = genmii_poll_link,
 971         .read_link      = bcm54xx_read_link,
 972 };
 973
 974 static struct mii_phy_def bcm5401_phy_def = {
 975         .phy_id         = 0x00206050,
 976         .phy_id_mask    = 0xfffffff0,
 977         .name           = "BCM5401",
 978         .features       = MII_GBIT_FEATURES,
 979         .magic_aneg     = 1,
 980         .ops            = &bcm5401_phy_ops
 981 };
 982
 983 /* Broadcom BCM 5411 */
 984 static const struct mii_phy_ops bcm5411_phy_ops = {
 985         .init           = bcm5411_init,
 986         .suspend        = generic_suspend,
 987         .setup_aneg     = bcm54xx_setup_aneg,
 988         .setup_forced   = bcm54xx_setup_forced,
 989         .poll_link      = genmii_poll_link,
 990         .read_link      = bcm54xx_read_link,
 991 };
 992
 993 static struct mii_phy_def bcm5411_phy_def = {
 994         .phy_id         = 0x00206070,
 995         .phy_id_mask    = 0xfffffff0,
 996         .name           = "BCM5411",
 997         .features       = MII_GBIT_FEATURES,
 998         .magic_aneg     = 1,
 999         .ops            = &bcm5411_phy_ops
1000 };
1001
1002 /* Broadcom BCM 5421 */
1003 static const struct mii_phy_ops bcm5421_phy_ops = {
1004         .init           = bcm5421_init,
1005         .suspend        = generic_suspend,
1006         .setup_aneg     = bcm54xx_setup_aneg,
1007         .setup_forced   = bcm54xx_setup_forced,
1008         .poll_link      = bcm5421_poll_link,
1009         .read_link      = bcm5421_read_link,
1010         .enable_fiber   = bcm5421_enable_fiber,
1011 };
1012
1013 static struct mii_phy_def bcm5421_phy_def = {
1014         .phy_id         = 0x002060e0,
1015         .phy_id_mask    = 0xfffffff0,
1016         .name           = "BCM5421",
1017         .features       = MII_GBIT_FEATURES,
1018         .magic_aneg     = 1,
1019         .ops            = &bcm5421_phy_ops
1020 };
1021
1022 /* Broadcom BCM 5421 built-in K2 */
1023 static const struct mii_phy_ops bcm5421k2_phy_ops = {
1024         .init           = bcm5421_init,
1025         .suspend        = generic_suspend,
1026         .setup_aneg     = bcm54xx_setup_aneg,
1027         .setup_forced   = bcm54xx_setup_forced,
1028         .poll_link      = genmii_poll_link,
1029         .read_link      = bcm54xx_read_link,
1030 };
1031
1032 static struct mii_phy_def bcm5421k2_phy_def = {
1033         .phy_id         = 0x002062e0,
1034         .phy_id_mask    = 0xfffffff0,
1035         .name           = "BCM5421-K2",
1036         .features       = MII_GBIT_FEATURES,
1037         .magic_aneg     = 1,
1038         .ops            = &bcm5421k2_phy_ops
1039 };
1040
1041 static const struct mii_phy_ops bcm5461_phy_ops = {
1042         .init           = bcm5421_init,
1043         .suspend        = generic_suspend,
1044         .setup_aneg     = bcm54xx_setup_aneg,
1045         .setup_forced   = bcm54xx_setup_forced,
1046         .poll_link      = bcm5461_poll_link,
1047         .read_link      = bcm5461_read_link,
1048         .enable_fiber   = bcm5461_enable_fiber,
1049 };
1050
1051 static struct mii_phy_def bcm5461_phy_def = {
1052         .phy_id         = 0x002060c0,
1053         .phy_id_mask    = 0xfffffff0,
1054         .name           = "BCM5461",
1055         .features       = MII_GBIT_FEATURES,
1056         .magic_aneg     = 1,
1057         .ops            = &bcm5461_phy_ops
1058 };
1059
1060 /* Broadcom BCM 5462 built-in Vesta */
1061 static const struct mii_phy_ops bcm5462V_phy_ops = {
1062         .init           = bcm5421_init,
1063         .suspend        = generic_suspend,
1064         .setup_aneg     = bcm54xx_setup_aneg,
1065         .setup_forced   = bcm54xx_setup_forced,
1066         .poll_link      = genmii_poll_link,
1067         .read_link      = bcm54xx_read_link,
1068 };
1069
1070 static struct mii_phy_def bcm5462V_phy_def = {
1071         .phy_id         = 0x002060d0,
1072         .phy_id_mask    = 0xfffffff0,
1073         .name           = "BCM5462-Vesta",
1074         .features       = MII_GBIT_FEATURES,
1075         .magic_aneg     = 1,
1076         .ops            = &bcm5462V_phy_ops
1077 };
1078
1079 /* Marvell 88E1101 amd 88E1111 */
1080 static const struct mii_phy_ops marvell88e1101_phy_ops = {
1081         .suspend        = generic_suspend,
1082         .setup_aneg     = marvell_setup_aneg,
1083         .setup_forced   = marvell_setup_forced,
1084         .poll_link      = genmii_poll_link,
1085         .read_link      = marvell_read_link
1086 };
1087
1088 static const struct mii_phy_ops marvell88e1111_phy_ops = {
1089         .init           = marvell88e1111_init,
1090         .suspend        = generic_suspend,
1091         .setup_aneg     = marvell_setup_aneg,
1092         .setup_forced   = marvell_setup_forced,
1093         .poll_link      = genmii_poll_link,
1094         .read_link      = marvell_read_link
1095 };
1096
1097 /* two revs in darwin for the 88e1101 ... I could use a datasheet
1098  * to get the proper names...
1099  */
1100 static struct mii_phy_def marvell88e1101v1_phy_def = {
1101         .phy_id         = 0x01410c20,
1102         .phy_id_mask    = 0xfffffff0,
1103         .name           = "Marvell 88E1101v1",
1104         .features       = MII_GBIT_FEATURES,
1105         .magic_aneg     = 1,
1106         .ops            = &marvell88e1101_phy_ops
1107 };
1108 static struct mii_phy_def marvell88e1101v2_phy_def = {
1109         .phy_id         = 0x01410c60,
1110         .phy_id_mask    = 0xfffffff0,
1111         .name           = "Marvell 88E1101v2",
1112         .features       = MII_GBIT_FEATURES,
1113         .magic_aneg     = 1,
1114         .ops            = &marvell88e1101_phy_ops
1115 };
1116 static struct mii_phy_def marvell88e1111_phy_def = {
1117         .phy_id         = 0x01410cc0,
1118         .phy_id_mask    = 0xfffffff0,
1119         .name           = "Marvell 88E1111",
1120         .features       = MII_GBIT_FEATURES,
1121         .magic_aneg     = 1,
1122         .ops            = &marvell88e1111_phy_ops
1123 };
1124
1125 /* Generic implementation for most 10/100 PHYs */
1126 static const struct mii_phy_ops generic_phy_ops = {
1127         .setup_aneg     = genmii_setup_aneg,
1128         .setup_forced   = genmii_setup_forced,
1129         .poll_link      = genmii_poll_link,
1130         .read_link      = genmii_read_link
1131 };
1132
1133 static struct mii_phy_def genmii_phy_def = {
1134         .phy_id         = 0x00000000,
1135         .phy_id_mask    = 0x00000000,
1136         .name           = "Generic MII",
1137         .features       = MII_BASIC_FEATURES,
1138         .magic_aneg     = 0,
1139         .ops            = &generic_phy_ops
1140 };
1141
1142 static struct mii_phy_def* mii_phy_table[] = {
1143         &bcm5201_phy_def,
1144         &bcm5221_phy_def,
1145         &bcm5241_phy_def,
1146         &bcm5400_phy_def,
1147         &bcm5401_phy_def,
1148         &bcm5411_phy_def,
1149         &bcm5421_phy_def,
1150         &bcm5421k2_phy_def,
1151         &bcm5461_phy_def,
1152         &bcm5462V_phy_def,
1153         &marvell88e1101v1_phy_def,
1154         &marvell88e1101v2_phy_def,
1155         &marvell88e1111_phy_def,
1156         &genmii_phy_def,
1157         NULL
1158 };
1159
1160 int sungem_phy_probe(struct mii_phy *phy, int mii_id)
1161 {
1162         int rc;
1163         u32 id;
1164         struct mii_phy_def* def;
1165         int i;
1166
1167         /* We do not reset the mii_phy structure as the driver
1168          * may re-probe the PHY regulary
1169          */
1170         phy->mii_id = mii_id;
1171
1172         /* Take PHY out of isloate mode and reset it. */
1173         rc = reset_one_mii_phy(phy, mii_id);
1174         if (rc)
1175                 goto fail;
1176
1177         /* Read ID and find matching entry */
1178         id = (sungem_phy_read(phy, MII_PHYSID1) << 16 | sungem_phy_read(phy, MII_PHYSID2));
1179         printk(KERN_DEBUG KBUILD_MODNAME ": " "PHY ID: %x, addr: %x\n",
1180                id, mii_id);
1181         for (i=0; (def = mii_phy_table[i]) != NULL; i++)
1182                 if ((id & def->phy_id_mask) == def->phy_id)
1183                         break;
1184         /* Should never be NULL (we have a generic entry), but... */
1185         if (def == NULL)
1186                 goto fail;
1187
1188         phy->def = def;
1189
1190         return 0;
1191 fail:
1192         phy->speed = 0;
1193         phy->duplex = 0;
1194         phy->pause = 0;
1195         phy->advertising = 0;
1196         return -ENODEV;
1197 }
1198
1199 EXPORT_SYMBOL(sungem_phy_probe);
1200 MODULE_LICENSE("GPL");