Linux-libre 5.4.47-gnu
[librecmc/linux-libre.git] / drivers / net / ppp / ppp_async.c
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * PPP async serial channel driver for Linux.
4  *
5  * Copyright 1999 Paul Mackerras.
6  *
7  * This driver provides the encapsulation and framing for sending
8  * and receiving PPP frames over async serial lines.  It relies on
9  * the generic PPP layer to give it frames to send and to process
10  * received frames.  It implements the PPP line discipline.
11  *
12  * Part of the code in this driver was inspired by the old async-only
13  * PPP driver, written by Michael Callahan and Al Longyear, and
14  * subsequently hacked by Paul Mackerras.
15  */
16
17 #include <linux/module.h>
18 #include <linux/kernel.h>
19 #include <linux/skbuff.h>
20 #include <linux/tty.h>
21 #include <linux/netdevice.h>
22 #include <linux/poll.h>
23 #include <linux/crc-ccitt.h>
24 #include <linux/ppp_defs.h>
25 #include <linux/ppp-ioctl.h>
26 #include <linux/ppp_channel.h>
27 #include <linux/spinlock.h>
28 #include <linux/init.h>
29 #include <linux/interrupt.h>
30 #include <linux/jiffies.h>
31 #include <linux/slab.h>
32 #include <asm/unaligned.h>
33 #include <linux/uaccess.h>
34 #include <asm/string.h>
35
36 #define PPP_VERSION     "2.4.2"
37
38 #define OBUFSIZE        4096
39
40 /* Structure for storing local state. */
41 struct asyncppp {
42         struct tty_struct *tty;
43         unsigned int    flags;
44         unsigned int    state;
45         unsigned int    rbits;
46         int             mru;
47         spinlock_t      xmit_lock;
48         spinlock_t      recv_lock;
49         unsigned long   xmit_flags;
50         u32             xaccm[8];
51         u32             raccm;
52         unsigned int    bytes_sent;
53         unsigned int    bytes_rcvd;
54
55         struct sk_buff  *tpkt;
56         int             tpkt_pos;
57         u16             tfcs;
58         unsigned char   *optr;
59         unsigned char   *olim;
60         unsigned long   last_xmit;
61
62         struct sk_buff  *rpkt;
63         int             lcp_fcs;
64         struct sk_buff_head rqueue;
65
66         struct tasklet_struct tsk;
67
68         refcount_t      refcnt;
69         struct completion dead;
70         struct ppp_channel chan;        /* interface to generic ppp layer */
71         unsigned char   obuf[OBUFSIZE];
72 };
73
74 /* Bit numbers in xmit_flags */
75 #define XMIT_WAKEUP     0
76 #define XMIT_FULL       1
77 #define XMIT_BUSY       2
78
79 /* State bits */
80 #define SC_TOSS         1
81 #define SC_ESCAPE       2
82 #define SC_PREV_ERROR   4
83
84 /* Bits in rbits */
85 #define SC_RCV_BITS     (SC_RCV_B7_1|SC_RCV_B7_0|SC_RCV_ODDP|SC_RCV_EVNP)
86
87 static int flag_time = HZ;
88 module_param(flag_time, int, 0);
89 MODULE_PARM_DESC(flag_time, "ppp_async: interval between flagged packets (in clock ticks)");
90 MODULE_LICENSE("GPL");
91 MODULE_ALIAS_LDISC(N_PPP);
92
93 /*
94  * Prototypes.
95  */
96 static int ppp_async_encode(struct asyncppp *ap);
97 static int ppp_async_send(struct ppp_channel *chan, struct sk_buff *skb);
98 static int ppp_async_push(struct asyncppp *ap);
99 static void ppp_async_flush_output(struct asyncppp *ap);
100 static void ppp_async_input(struct asyncppp *ap, const unsigned char *buf,
101                             char *flags, int count);
102 static int ppp_async_ioctl(struct ppp_channel *chan, unsigned int cmd,
103                            unsigned long arg);
104 static void ppp_async_process(unsigned long arg);
105
106 static void async_lcp_peek(struct asyncppp *ap, unsigned char *data,
107                            int len, int inbound);
108
109 static const struct ppp_channel_ops async_ops = {
110         .start_xmit = ppp_async_send,
111         .ioctl      = ppp_async_ioctl,
112 };
113
114 /*
115  * Routines implementing the PPP line discipline.
116  */
117
118 /*
119  * We have a potential race on dereferencing tty->disc_data,
120  * because the tty layer provides no locking at all - thus one
121  * cpu could be running ppp_asynctty_receive while another
122  * calls ppp_asynctty_close, which zeroes tty->disc_data and
123  * frees the memory that ppp_asynctty_receive is using.  The best
124  * way to fix this is to use a rwlock in the tty struct, but for now
125  * we use a single global rwlock for all ttys in ppp line discipline.
126  *
127  * FIXME: this is no longer true. The _close path for the ldisc is
128  * now guaranteed to be sane.
129  */
130 static DEFINE_RWLOCK(disc_data_lock);
131
132 static struct asyncppp *ap_get(struct tty_struct *tty)
133 {
134         struct asyncppp *ap;
135
136         read_lock(&disc_data_lock);
137         ap = tty->disc_data;
138         if (ap != NULL)
139                 refcount_inc(&ap->refcnt);
140         read_unlock(&disc_data_lock);
141         return ap;
142 }
143
144 static void ap_put(struct asyncppp *ap)
145 {
146         if (refcount_dec_and_test(&ap->refcnt))
147                 complete(&ap->dead);
148 }
149
150 /*
151  * Called when a tty is put into PPP line discipline. Called in process
152  * context.
153  */
154 static int
155 ppp_asynctty_open(struct tty_struct *tty)
156 {
157         struct asyncppp *ap;
158         int err;
159         int speed;
160
161         if (tty->ops->write == NULL)
162                 return -EOPNOTSUPP;
163
164         err = -ENOMEM;
165         ap = kzalloc(sizeof(*ap), GFP_KERNEL);
166         if (!ap)
167                 goto out;
168
169         /* initialize the asyncppp structure */
170         ap->tty = tty;
171         ap->mru = PPP_MRU;
172         spin_lock_init(&ap->xmit_lock);
173         spin_lock_init(&ap->recv_lock);
174         ap->xaccm[0] = ~0U;
175         ap->xaccm[3] = 0x60000000U;
176         ap->raccm = ~0U;
177         ap->optr = ap->obuf;
178         ap->olim = ap->obuf;
179         ap->lcp_fcs = -1;
180
181         skb_queue_head_init(&ap->rqueue);
182         tasklet_init(&ap->tsk, ppp_async_process, (unsigned long) ap);
183
184         refcount_set(&ap->refcnt, 1);
185         init_completion(&ap->dead);
186
187         ap->chan.private = ap;
188         ap->chan.ops = &async_ops;
189         ap->chan.mtu = PPP_MRU;
190         speed = tty_get_baud_rate(tty);
191         ap->chan.speed = speed;
192         err = ppp_register_channel(&ap->chan);
193         if (err)
194                 goto out_free;
195
196         tty->disc_data = ap;
197         tty->receive_room = 65536;
198         return 0;
199
200  out_free:
201         kfree(ap);
202  out:
203         return err;
204 }
205
206 /*
207  * Called when the tty is put into another line discipline
208  * or it hangs up.  We have to wait for any cpu currently
209  * executing in any of the other ppp_asynctty_* routines to
210  * finish before we can call ppp_unregister_channel and free
211  * the asyncppp struct.  This routine must be called from
212  * process context, not interrupt or softirq context.
213  */
214 static void
215 ppp_asynctty_close(struct tty_struct *tty)
216 {
217         struct asyncppp *ap;
218
219         write_lock_irq(&disc_data_lock);
220         ap = tty->disc_data;
221         tty->disc_data = NULL;
222         write_unlock_irq(&disc_data_lock);
223         if (!ap)
224                 return;
225
226         /*
227          * We have now ensured that nobody can start using ap from now
228          * on, but we have to wait for all existing users to finish.
229          * Note that ppp_unregister_channel ensures that no calls to
230          * our channel ops (i.e. ppp_async_send/ioctl) are in progress
231          * by the time it returns.
232          */
233         if (!refcount_dec_and_test(&ap->refcnt))
234                 wait_for_completion(&ap->dead);
235         tasklet_kill(&ap->tsk);
236
237         ppp_unregister_channel(&ap->chan);
238         kfree_skb(ap->rpkt);
239         skb_queue_purge(&ap->rqueue);
240         kfree_skb(ap->tpkt);
241         kfree(ap);
242 }
243
244 /*
245  * Called on tty hangup in process context.
246  *
247  * Wait for I/O to driver to complete and unregister PPP channel.
248  * This is already done by the close routine, so just call that.
249  */
250 static int ppp_asynctty_hangup(struct tty_struct *tty)
251 {
252         ppp_asynctty_close(tty);
253         return 0;
254 }
255
256 /*
257  * Read does nothing - no data is ever available this way.
258  * Pppd reads and writes packets via /dev/ppp instead.
259  */
260 static ssize_t
261 ppp_asynctty_read(struct tty_struct *tty, struct file *file,
262                   unsigned char __user *buf, size_t count)
263 {
264         return -EAGAIN;
265 }
266
267 /*
268  * Write on the tty does nothing, the packets all come in
269  * from the ppp generic stuff.
270  */
271 static ssize_t
272 ppp_asynctty_write(struct tty_struct *tty, struct file *file,
273                    const unsigned char *buf, size_t count)
274 {
275         return -EAGAIN;
276 }
277
278 /*
279  * Called in process context only. May be re-entered by multiple
280  * ioctl calling threads.
281  */
282
283 static int
284 ppp_asynctty_ioctl(struct tty_struct *tty, struct file *file,
285                    unsigned int cmd, unsigned long arg)
286 {
287         struct asyncppp *ap = ap_get(tty);
288         int err, val;
289         int __user *p = (int __user *)arg;
290
291         if (!ap)
292                 return -ENXIO;
293         err = -EFAULT;
294         switch (cmd) {
295         case PPPIOCGCHAN:
296                 err = -EFAULT;
297                 if (put_user(ppp_channel_index(&ap->chan), p))
298                         break;
299                 err = 0;
300                 break;
301
302         case PPPIOCGUNIT:
303                 err = -EFAULT;
304                 if (put_user(ppp_unit_number(&ap->chan), p))
305                         break;
306                 err = 0;
307                 break;
308
309         case TCFLSH:
310                 /* flush our buffers and the serial port's buffer */
311                 if (arg == TCIOFLUSH || arg == TCOFLUSH)
312                         ppp_async_flush_output(ap);
313                 err = n_tty_ioctl_helper(tty, file, cmd, arg);
314                 break;
315
316         case FIONREAD:
317                 val = 0;
318                 if (put_user(val, p))
319                         break;
320                 err = 0;
321                 break;
322
323         default:
324                 /* Try the various mode ioctls */
325                 err = tty_mode_ioctl(tty, file, cmd, arg);
326         }
327
328         ap_put(ap);
329         return err;
330 }
331
332 /* No kernel lock - fine */
333 static __poll_t
334 ppp_asynctty_poll(struct tty_struct *tty, struct file *file, poll_table *wait)
335 {
336         return 0;
337 }
338
339 /* May sleep, don't call from interrupt level or with interrupts disabled */
340 static void
341 ppp_asynctty_receive(struct tty_struct *tty, const unsigned char *buf,
342                   char *cflags, int count)
343 {
344         struct asyncppp *ap = ap_get(tty);
345         unsigned long flags;
346
347         if (!ap)
348                 return;
349         spin_lock_irqsave(&ap->recv_lock, flags);
350         ppp_async_input(ap, buf, cflags, count);
351         spin_unlock_irqrestore(&ap->recv_lock, flags);
352         if (!skb_queue_empty(&ap->rqueue))
353                 tasklet_schedule(&ap->tsk);
354         ap_put(ap);
355         tty_unthrottle(tty);
356 }
357
358 static void
359 ppp_asynctty_wakeup(struct tty_struct *tty)
360 {
361         struct asyncppp *ap = ap_get(tty);
362
363         clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
364         if (!ap)
365                 return;
366         set_bit(XMIT_WAKEUP, &ap->xmit_flags);
367         tasklet_schedule(&ap->tsk);
368         ap_put(ap);
369 }
370
371
372 static struct tty_ldisc_ops ppp_ldisc = {
373         .owner  = THIS_MODULE,
374         .magic  = TTY_LDISC_MAGIC,
375         .name   = "ppp",
376         .open   = ppp_asynctty_open,
377         .close  = ppp_asynctty_close,
378         .hangup = ppp_asynctty_hangup,
379         .read   = ppp_asynctty_read,
380         .write  = ppp_asynctty_write,
381         .ioctl  = ppp_asynctty_ioctl,
382         .poll   = ppp_asynctty_poll,
383         .receive_buf = ppp_asynctty_receive,
384         .write_wakeup = ppp_asynctty_wakeup,
385 };
386
387 static int __init
388 ppp_async_init(void)
389 {
390         int err;
391
392         err = tty_register_ldisc(N_PPP, &ppp_ldisc);
393         if (err != 0)
394                 printk(KERN_ERR "PPP_async: error %d registering line disc.\n",
395                        err);
396         return err;
397 }
398
399 /*
400  * The following routines provide the PPP channel interface.
401  */
402 static int
403 ppp_async_ioctl(struct ppp_channel *chan, unsigned int cmd, unsigned long arg)
404 {
405         struct asyncppp *ap = chan->private;
406         void __user *argp = (void __user *)arg;
407         int __user *p = argp;
408         int err, val;
409         u32 accm[8];
410
411         err = -EFAULT;
412         switch (cmd) {
413         case PPPIOCGFLAGS:
414                 val = ap->flags | ap->rbits;
415                 if (put_user(val, p))
416                         break;
417                 err = 0;
418                 break;
419         case PPPIOCSFLAGS:
420                 if (get_user(val, p))
421                         break;
422                 ap->flags = val & ~SC_RCV_BITS;
423                 spin_lock_irq(&ap->recv_lock);
424                 ap->rbits = val & SC_RCV_BITS;
425                 spin_unlock_irq(&ap->recv_lock);
426                 err = 0;
427                 break;
428
429         case PPPIOCGASYNCMAP:
430                 if (put_user(ap->xaccm[0], (u32 __user *)argp))
431                         break;
432                 err = 0;
433                 break;
434         case PPPIOCSASYNCMAP:
435                 if (get_user(ap->xaccm[0], (u32 __user *)argp))
436                         break;
437                 err = 0;
438                 break;
439
440         case PPPIOCGRASYNCMAP:
441                 if (put_user(ap->raccm, (u32 __user *)argp))
442                         break;
443                 err = 0;
444                 break;
445         case PPPIOCSRASYNCMAP:
446                 if (get_user(ap->raccm, (u32 __user *)argp))
447                         break;
448                 err = 0;
449                 break;
450
451         case PPPIOCGXASYNCMAP:
452                 if (copy_to_user(argp, ap->xaccm, sizeof(ap->xaccm)))
453                         break;
454                 err = 0;
455                 break;
456         case PPPIOCSXASYNCMAP:
457                 if (copy_from_user(accm, argp, sizeof(accm)))
458                         break;
459                 accm[2] &= ~0x40000000U;        /* can't escape 0x5e */
460                 accm[3] |= 0x60000000U;         /* must escape 0x7d, 0x7e */
461                 memcpy(ap->xaccm, accm, sizeof(ap->xaccm));
462                 err = 0;
463                 break;
464
465         case PPPIOCGMRU:
466                 if (put_user(ap->mru, p))
467                         break;
468                 err = 0;
469                 break;
470         case PPPIOCSMRU:
471                 if (get_user(val, p))
472                         break;
473                 if (val < PPP_MRU)
474                         val = PPP_MRU;
475                 ap->mru = val;
476                 err = 0;
477                 break;
478
479         default:
480                 err = -ENOTTY;
481         }
482
483         return err;
484 }
485
486 /*
487  * This is called at softirq level to deliver received packets
488  * to the ppp_generic code, and to tell the ppp_generic code
489  * if we can accept more output now.
490  */
491 static void ppp_async_process(unsigned long arg)
492 {
493         struct asyncppp *ap = (struct asyncppp *) arg;
494         struct sk_buff *skb;
495
496         /* process received packets */
497         while ((skb = skb_dequeue(&ap->rqueue)) != NULL) {
498                 if (skb->cb[0])
499                         ppp_input_error(&ap->chan, 0);
500                 ppp_input(&ap->chan, skb);
501         }
502
503         /* try to push more stuff out */
504         if (test_bit(XMIT_WAKEUP, &ap->xmit_flags) && ppp_async_push(ap))
505                 ppp_output_wakeup(&ap->chan);
506 }
507
508 /*
509  * Procedures for encapsulation and framing.
510  */
511
512 /*
513  * Procedure to encode the data for async serial transmission.
514  * Does octet stuffing (escaping), puts the address/control bytes
515  * on if A/C compression is disabled, and does protocol compression.
516  * Assumes ap->tpkt != 0 on entry.
517  * Returns 1 if we finished the current frame, 0 otherwise.
518  */
519
520 #define PUT_BYTE(ap, buf, c, islcp)     do {            \
521         if ((islcp && c < 0x20) || (ap->xaccm[c >> 5] & (1 << (c & 0x1f)))) {\
522                 *buf++ = PPP_ESCAPE;                    \
523                 *buf++ = c ^ PPP_TRANS;                 \
524         } else                                          \
525                 *buf++ = c;                             \
526 } while (0)
527
528 static int
529 ppp_async_encode(struct asyncppp *ap)
530 {
531         int fcs, i, count, c, proto;
532         unsigned char *buf, *buflim;
533         unsigned char *data;
534         int islcp;
535
536         buf = ap->obuf;
537         ap->olim = buf;
538         ap->optr = buf;
539         i = ap->tpkt_pos;
540         data = ap->tpkt->data;
541         count = ap->tpkt->len;
542         fcs = ap->tfcs;
543         proto = get_unaligned_be16(data);
544
545         /*
546          * LCP packets with code values between 1 (configure-reqest)
547          * and 7 (code-reject) must be sent as though no options
548          * had been negotiated.
549          */
550         islcp = proto == PPP_LCP && 1 <= data[2] && data[2] <= 7;
551
552         if (i == 0) {
553                 if (islcp)
554                         async_lcp_peek(ap, data, count, 0);
555
556                 /*
557                  * Start of a new packet - insert the leading FLAG
558                  * character if necessary.
559                  */
560                 if (islcp || flag_time == 0 ||
561                     time_after_eq(jiffies, ap->last_xmit + flag_time))
562                         *buf++ = PPP_FLAG;
563                 ap->last_xmit = jiffies;
564                 fcs = PPP_INITFCS;
565
566                 /*
567                  * Put in the address/control bytes if necessary
568                  */
569                 if ((ap->flags & SC_COMP_AC) == 0 || islcp) {
570                         PUT_BYTE(ap, buf, 0xff, islcp);
571                         fcs = PPP_FCS(fcs, 0xff);
572                         PUT_BYTE(ap, buf, 0x03, islcp);
573                         fcs = PPP_FCS(fcs, 0x03);
574                 }
575         }
576
577         /*
578          * Once we put in the last byte, we need to put in the FCS
579          * and closing flag, so make sure there is at least 7 bytes
580          * of free space in the output buffer.
581          */
582         buflim = ap->obuf + OBUFSIZE - 6;
583         while (i < count && buf < buflim) {
584                 c = data[i++];
585                 if (i == 1 && c == 0 && (ap->flags & SC_COMP_PROT))
586                         continue;       /* compress protocol field */
587                 fcs = PPP_FCS(fcs, c);
588                 PUT_BYTE(ap, buf, c, islcp);
589         }
590
591         if (i < count) {
592                 /*
593                  * Remember where we are up to in this packet.
594                  */
595                 ap->olim = buf;
596                 ap->tpkt_pos = i;
597                 ap->tfcs = fcs;
598                 return 0;
599         }
600
601         /*
602          * We have finished the packet.  Add the FCS and flag.
603          */
604         fcs = ~fcs;
605         c = fcs & 0xff;
606         PUT_BYTE(ap, buf, c, islcp);
607         c = (fcs >> 8) & 0xff;
608         PUT_BYTE(ap, buf, c, islcp);
609         *buf++ = PPP_FLAG;
610         ap->olim = buf;
611
612         consume_skb(ap->tpkt);
613         ap->tpkt = NULL;
614         return 1;
615 }
616
617 /*
618  * Transmit-side routines.
619  */
620
621 /*
622  * Send a packet to the peer over an async tty line.
623  * Returns 1 iff the packet was accepted.
624  * If the packet was not accepted, we will call ppp_output_wakeup
625  * at some later time.
626  */
627 static int
628 ppp_async_send(struct ppp_channel *chan, struct sk_buff *skb)
629 {
630         struct asyncppp *ap = chan->private;
631
632         ppp_async_push(ap);
633
634         if (test_and_set_bit(XMIT_FULL, &ap->xmit_flags))
635                 return 0;       /* already full */
636         ap->tpkt = skb;
637         ap->tpkt_pos = 0;
638
639         ppp_async_push(ap);
640         return 1;
641 }
642
643 /*
644  * Push as much data as possible out to the tty.
645  */
646 static int
647 ppp_async_push(struct asyncppp *ap)
648 {
649         int avail, sent, done = 0;
650         struct tty_struct *tty = ap->tty;
651         int tty_stuffed = 0;
652
653         /*
654          * We can get called recursively here if the tty write
655          * function calls our wakeup function.  This can happen
656          * for example on a pty with both the master and slave
657          * set to PPP line discipline.
658          * We use the XMIT_BUSY bit to detect this and get out,
659          * leaving the XMIT_WAKEUP bit set to tell the other
660          * instance that it may now be able to write more now.
661          */
662         if (test_and_set_bit(XMIT_BUSY, &ap->xmit_flags))
663                 return 0;
664         spin_lock_bh(&ap->xmit_lock);
665         for (;;) {
666                 if (test_and_clear_bit(XMIT_WAKEUP, &ap->xmit_flags))
667                         tty_stuffed = 0;
668                 if (!tty_stuffed && ap->optr < ap->olim) {
669                         avail = ap->olim - ap->optr;
670                         set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
671                         sent = tty->ops->write(tty, ap->optr, avail);
672                         if (sent < 0)
673                                 goto flush;     /* error, e.g. loss of CD */
674                         ap->optr += sent;
675                         if (sent < avail)
676                                 tty_stuffed = 1;
677                         continue;
678                 }
679                 if (ap->optr >= ap->olim && ap->tpkt) {
680                         if (ppp_async_encode(ap)) {
681                                 /* finished processing ap->tpkt */
682                                 clear_bit(XMIT_FULL, &ap->xmit_flags);
683                                 done = 1;
684                         }
685                         continue;
686                 }
687                 /*
688                  * We haven't made any progress this time around.
689                  * Clear XMIT_BUSY to let other callers in, but
690                  * after doing so we have to check if anyone set
691                  * XMIT_WAKEUP since we last checked it.  If they
692                  * did, we should try again to set XMIT_BUSY and go
693                  * around again in case XMIT_BUSY was still set when
694                  * the other caller tried.
695                  */
696                 clear_bit(XMIT_BUSY, &ap->xmit_flags);
697                 /* any more work to do? if not, exit the loop */
698                 if (!(test_bit(XMIT_WAKEUP, &ap->xmit_flags) ||
699                       (!tty_stuffed && ap->tpkt)))
700                         break;
701                 /* more work to do, see if we can do it now */
702                 if (test_and_set_bit(XMIT_BUSY, &ap->xmit_flags))
703                         break;
704         }
705         spin_unlock_bh(&ap->xmit_lock);
706         return done;
707
708 flush:
709         clear_bit(XMIT_BUSY, &ap->xmit_flags);
710         if (ap->tpkt) {
711                 kfree_skb(ap->tpkt);
712                 ap->tpkt = NULL;
713                 clear_bit(XMIT_FULL, &ap->xmit_flags);
714                 done = 1;
715         }
716         ap->optr = ap->olim;
717         spin_unlock_bh(&ap->xmit_lock);
718         return done;
719 }
720
721 /*
722  * Flush output from our internal buffers.
723  * Called for the TCFLSH ioctl. Can be entered in parallel
724  * but this is covered by the xmit_lock.
725  */
726 static void
727 ppp_async_flush_output(struct asyncppp *ap)
728 {
729         int done = 0;
730
731         spin_lock_bh(&ap->xmit_lock);
732         ap->optr = ap->olim;
733         if (ap->tpkt != NULL) {
734                 kfree_skb(ap->tpkt);
735                 ap->tpkt = NULL;
736                 clear_bit(XMIT_FULL, &ap->xmit_flags);
737                 done = 1;
738         }
739         spin_unlock_bh(&ap->xmit_lock);
740         if (done)
741                 ppp_output_wakeup(&ap->chan);
742 }
743
744 /*
745  * Receive-side routines.
746  */
747
748 /* see how many ordinary chars there are at the start of buf */
749 static inline int
750 scan_ordinary(struct asyncppp *ap, const unsigned char *buf, int count)
751 {
752         int i, c;
753
754         for (i = 0; i < count; ++i) {
755                 c = buf[i];
756                 if (c == PPP_ESCAPE || c == PPP_FLAG ||
757                     (c < 0x20 && (ap->raccm & (1 << c)) != 0))
758                         break;
759         }
760         return i;
761 }
762
763 /* called when a flag is seen - do end-of-packet processing */
764 static void
765 process_input_packet(struct asyncppp *ap)
766 {
767         struct sk_buff *skb;
768         unsigned char *p;
769         unsigned int len, fcs;
770
771         skb = ap->rpkt;
772         if (ap->state & (SC_TOSS | SC_ESCAPE))
773                 goto err;
774
775         if (skb == NULL)
776                 return;         /* 0-length packet */
777
778         /* check the FCS */
779         p = skb->data;
780         len = skb->len;
781         if (len < 3)
782                 goto err;       /* too short */
783         fcs = PPP_INITFCS;
784         for (; len > 0; --len)
785                 fcs = PPP_FCS(fcs, *p++);
786         if (fcs != PPP_GOODFCS)
787                 goto err;       /* bad FCS */
788         skb_trim(skb, skb->len - 2);
789
790         /* check for address/control and protocol compression */
791         p = skb->data;
792         if (p[0] == PPP_ALLSTATIONS) {
793                 /* chop off address/control */
794                 if (p[1] != PPP_UI || skb->len < 3)
795                         goto err;
796                 p = skb_pull(skb, 2);
797         }
798
799         /* If protocol field is not compressed, it can be LCP packet */
800         if (!(p[0] & 0x01)) {
801                 unsigned int proto;
802
803                 if (skb->len < 2)
804                         goto err;
805                 proto = (p[0] << 8) + p[1];
806                 if (proto == PPP_LCP)
807                         async_lcp_peek(ap, p, skb->len, 1);
808         }
809
810         /* queue the frame to be processed */
811         skb->cb[0] = ap->state;
812         skb_queue_tail(&ap->rqueue, skb);
813         ap->rpkt = NULL;
814         ap->state = 0;
815         return;
816
817  err:
818         /* frame had an error, remember that, reset SC_TOSS & SC_ESCAPE */
819         ap->state = SC_PREV_ERROR;
820         if (skb) {
821                 /* make skb appear as freshly allocated */
822                 skb_trim(skb, 0);
823                 skb_reserve(skb, - skb_headroom(skb));
824         }
825 }
826
827 /* Called when the tty driver has data for us. Runs parallel with the
828    other ldisc functions but will not be re-entered */
829
830 static void
831 ppp_async_input(struct asyncppp *ap, const unsigned char *buf,
832                 char *flags, int count)
833 {
834         struct sk_buff *skb;
835         int c, i, j, n, s, f;
836         unsigned char *sp;
837
838         /* update bits used for 8-bit cleanness detection */
839         if (~ap->rbits & SC_RCV_BITS) {
840                 s = 0;
841                 for (i = 0; i < count; ++i) {
842                         c = buf[i];
843                         if (flags && flags[i] != 0)
844                                 continue;
845                         s |= (c & 0x80)? SC_RCV_B7_1: SC_RCV_B7_0;
846                         c = ((c >> 4) ^ c) & 0xf;
847                         s |= (0x6996 & (1 << c))? SC_RCV_ODDP: SC_RCV_EVNP;
848                 }
849                 ap->rbits |= s;
850         }
851
852         while (count > 0) {
853                 /* scan through and see how many chars we can do in bulk */
854                 if ((ap->state & SC_ESCAPE) && buf[0] == PPP_ESCAPE)
855                         n = 1;
856                 else
857                         n = scan_ordinary(ap, buf, count);
858
859                 f = 0;
860                 if (flags && (ap->state & SC_TOSS) == 0) {
861                         /* check the flags to see if any char had an error */
862                         for (j = 0; j < n; ++j)
863                                 if ((f = flags[j]) != 0)
864                                         break;
865                 }
866                 if (f != 0) {
867                         /* start tossing */
868                         ap->state |= SC_TOSS;
869
870                 } else if (n > 0 && (ap->state & SC_TOSS) == 0) {
871                         /* stuff the chars in the skb */
872                         skb = ap->rpkt;
873                         if (!skb) {
874                                 skb = dev_alloc_skb(ap->mru + PPP_HDRLEN + 2);
875                                 if (!skb)
876                                         goto nomem;
877                                 ap->rpkt = skb;
878                         }
879                         if (skb->len == 0) {
880                                 /* Try to get the payload 4-byte aligned.
881                                  * This should match the
882                                  * PPP_ALLSTATIONS/PPP_UI/compressed tests in
883                                  * process_input_packet, but we do not have
884                                  * enough chars here to test buf[1] and buf[2].
885                                  */
886                                 if (buf[0] != PPP_ALLSTATIONS)
887                                         skb_reserve(skb, 2 + (buf[0] & 1));
888                         }
889                         if (n > skb_tailroom(skb)) {
890                                 /* packet overflowed MRU */
891                                 ap->state |= SC_TOSS;
892                         } else {
893                                 sp = skb_put_data(skb, buf, n);
894                                 if (ap->state & SC_ESCAPE) {
895                                         sp[0] ^= PPP_TRANS;
896                                         ap->state &= ~SC_ESCAPE;
897                                 }
898                         }
899                 }
900
901                 if (n >= count)
902                         break;
903
904                 c = buf[n];
905                 if (flags != NULL && flags[n] != 0) {
906                         ap->state |= SC_TOSS;
907                 } else if (c == PPP_FLAG) {
908                         process_input_packet(ap);
909                 } else if (c == PPP_ESCAPE) {
910                         ap->state |= SC_ESCAPE;
911                 } else if (I_IXON(ap->tty)) {
912                         if (c == START_CHAR(ap->tty))
913                                 start_tty(ap->tty);
914                         else if (c == STOP_CHAR(ap->tty))
915                                 stop_tty(ap->tty);
916                 }
917                 /* otherwise it's a char in the recv ACCM */
918                 ++n;
919
920                 buf += n;
921                 if (flags)
922                         flags += n;
923                 count -= n;
924         }
925         return;
926
927  nomem:
928         printk(KERN_ERR "PPPasync: no memory (input pkt)\n");
929         ap->state |= SC_TOSS;
930 }
931
932 /*
933  * We look at LCP frames going past so that we can notice
934  * and react to the LCP configure-ack from the peer.
935  * In the situation where the peer has been sent a configure-ack
936  * already, LCP is up once it has sent its configure-ack
937  * so the immediately following packet can be sent with the
938  * configured LCP options.  This allows us to process the following
939  * packet correctly without pppd needing to respond quickly.
940  *
941  * We only respond to the received configure-ack if we have just
942  * sent a configure-request, and the configure-ack contains the
943  * same data (this is checked using a 16-bit crc of the data).
944  */
945 #define CONFREQ         1       /* LCP code field values */
946 #define CONFACK         2
947 #define LCP_MRU         1       /* LCP option numbers */
948 #define LCP_ASYNCMAP    2
949
950 static void async_lcp_peek(struct asyncppp *ap, unsigned char *data,
951                            int len, int inbound)
952 {
953         int dlen, fcs, i, code;
954         u32 val;
955
956         data += 2;              /* skip protocol bytes */
957         len -= 2;
958         if (len < 4)            /* 4 = code, ID, length */
959                 return;
960         code = data[0];
961         if (code != CONFACK && code != CONFREQ)
962                 return;
963         dlen = get_unaligned_be16(data + 2);
964         if (len < dlen)
965                 return;         /* packet got truncated or length is bogus */
966
967         if (code == (inbound? CONFACK: CONFREQ)) {
968                 /*
969                  * sent confreq or received confack:
970                  * calculate the crc of the data from the ID field on.
971                  */
972                 fcs = PPP_INITFCS;
973                 for (i = 1; i < dlen; ++i)
974                         fcs = PPP_FCS(fcs, data[i]);
975
976                 if (!inbound) {
977                         /* outbound confreq - remember the crc for later */
978                         ap->lcp_fcs = fcs;
979                         return;
980                 }
981
982                 /* received confack, check the crc */
983                 fcs ^= ap->lcp_fcs;
984                 ap->lcp_fcs = -1;
985                 if (fcs != 0)
986                         return;
987         } else if (inbound)
988                 return; /* not interested in received confreq */
989
990         /* process the options in the confack */
991         data += 4;
992         dlen -= 4;
993         /* data[0] is code, data[1] is length */
994         while (dlen >= 2 && dlen >= data[1] && data[1] >= 2) {
995                 switch (data[0]) {
996                 case LCP_MRU:
997                         val = get_unaligned_be16(data + 2);
998                         if (inbound)
999                                 ap->mru = val;
1000                         else
1001                                 ap->chan.mtu = val;
1002                         break;
1003                 case LCP_ASYNCMAP:
1004                         val = get_unaligned_be32(data + 2);
1005                         if (inbound)
1006                                 ap->raccm = val;
1007                         else
1008                                 ap->xaccm[0] = val;
1009                         break;
1010                 }
1011                 dlen -= data[1];
1012                 data += data[1];
1013         }
1014 }
1015
1016 static void __exit ppp_async_cleanup(void)
1017 {
1018         if (tty_unregister_ldisc(N_PPP) != 0)
1019                 printk(KERN_ERR "failed to unregister PPP line discipline\n");
1020 }
1021
1022 module_init(ppp_async_init);
1023 module_exit(ppp_async_cleanup);