Linux-libre 3.18.13-gnu
[librecmc/linux-libre.git] / drivers / net / ethernet / amd / nmclan_cs.c
1 /* ----------------------------------------------------------------------------
2 Linux PCMCIA ethernet adapter driver for the New Media Ethernet LAN.
3   nmclan_cs.c,v 0.16 1995/07/01 06:42:17 rpao Exp rpao
4
5   The Ethernet LAN uses the Advanced Micro Devices (AMD) Am79C940 Media
6   Access Controller for Ethernet (MACE).  It is essentially the Am2150
7   PCMCIA Ethernet card contained in the Am2150 Demo Kit.
8
9 Written by Roger C. Pao <rpao@paonet.org>
10   Copyright 1995 Roger C. Pao
11   Linux 2.5 cleanups Copyright Red Hat 2003
12
13   This software may be used and distributed according to the terms of
14   the GNU General Public License.
15
16 Ported to Linux 1.3.* network driver environment by
17   Matti Aarnio <mea@utu.fi>
18
19 References
20
21   Am2150 Technical Reference Manual, Revision 1.0, August 17, 1993
22   Am79C940 (MACE) Data Sheet, 1994
23   Am79C90 (C-LANCE) Data Sheet, 1994
24   Linux PCMCIA Programmer's Guide v1.17
25   /usr/src/linux/net/inet/dev.c, Linux kernel 1.2.8
26
27   Eric Mears, New Media Corporation
28   Tom Pollard, New Media Corporation
29   Dean Siasoyco, New Media Corporation
30   Ken Lesniak, Silicon Graphics, Inc. <lesniak@boston.sgi.com>
31   Donald Becker <becker@scyld.com>
32   David Hinds <dahinds@users.sourceforge.net>
33
34   The Linux client driver is based on the 3c589_cs.c client driver by
35   David Hinds.
36
37   The Linux network driver outline is based on the 3c589_cs.c driver,
38   the 8390.c driver, and the example skeleton.c kernel code, which are
39   by Donald Becker.
40
41   The Am2150 network driver hardware interface code is based on the
42   OS/9000 driver for the New Media Ethernet LAN by Eric Mears.
43
44   Special thanks for testing and help in debugging this driver goes
45   to Ken Lesniak.
46
47 -------------------------------------------------------------------------------
48 Driver Notes and Issues
49 -------------------------------------------------------------------------------
50
51 1. Developed on a Dell 320SLi
52    PCMCIA Card Services 2.6.2
53    Linux dell 1.2.10 #1 Thu Jun 29 20:23:41 PDT 1995 i386
54
55 2. rc.pcmcia may require loading pcmcia_core with io_speed=300:
56    'insmod pcmcia_core.o io_speed=300'.
57    This will avoid problems with fast systems which causes rx_framecnt
58    to return random values.
59
60 3. If hot extraction does not work for you, use 'ifconfig eth0 down'
61    before extraction.
62
63 4. There is a bad slow-down problem in this driver.
64
65 5. Future: Multicast processing.  In the meantime, do _not_ compile your
66    kernel with multicast ip enabled.
67
68 -------------------------------------------------------------------------------
69 History
70 -------------------------------------------------------------------------------
71 Log: nmclan_cs.c,v
72  * 2.5.75-ac1 2003/07/11 Alan Cox <alan@lxorguk.ukuu.org.uk>
73  * Fixed hang on card eject as we probe it
74  * Cleaned up to use new style locking.
75  *
76  * Revision 0.16  1995/07/01  06:42:17  rpao
77  * Bug fix: nmclan_reset() called CardServices incorrectly.
78  *
79  * Revision 0.15  1995/05/24  08:09:47  rpao
80  * Re-implement MULTI_TX dev->tbusy handling.
81  *
82  * Revision 0.14  1995/05/23  03:19:30  rpao
83  * Added, in nmclan_config(), "tuple.Attributes = 0;".
84  * Modified MACE ID check to ignore chip revision level.
85  * Avoid tx_free_frames race condition between _start_xmit and _interrupt.
86  *
87  * Revision 0.13  1995/05/18  05:56:34  rpao
88  * Statistics changes.
89  * Bug fix: nmclan_reset did not enable TX and RX: call restore_multicast_list.
90  * Bug fix: mace_interrupt checks ~MACE_IMR_DEFAULT.  Fixes driver lockup.
91  *
92  * Revision 0.12  1995/05/14  00:12:23  rpao
93  * Statistics overhaul.
94  *
95
96 95/05/13 rpao   V0.10a
97                 Bug fix: MACE statistics counters used wrong I/O ports.
98                 Bug fix: mace_interrupt() needed to allow statistics to be
99                 processed without RX or TX interrupts pending.
100 95/05/11 rpao   V0.10
101                 Multiple transmit request processing.
102                 Modified statistics to use MACE counters where possible.
103 95/05/10 rpao   V0.09 Bug fix: Must use IO_DATA_PATH_WIDTH_AUTO.
104                 *Released
105 95/05/10 rpao   V0.08
106                 Bug fix: Make all non-exported functions private by using
107                 static keyword.
108                 Bug fix: Test IntrCnt _before_ reading MACE_IR.
109 95/05/10 rpao   V0.07 Statistics.
110 95/05/09 rpao   V0.06 Fix rx_framecnt problem by addition of PCIC wait states.
111
112 ---------------------------------------------------------------------------- */
113
114 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
115
116 #define DRV_NAME        "nmclan_cs"
117 #define DRV_VERSION     "0.16"
118
119
120 /* ----------------------------------------------------------------------------
121 Conditional Compilation Options
122 ---------------------------------------------------------------------------- */
123
124 #define MULTI_TX                        0
125 #define RESET_ON_TIMEOUT                1
126 #define TX_INTERRUPTABLE                1
127 #define RESET_XILINX                    0
128
129 /* ----------------------------------------------------------------------------
130 Include Files
131 ---------------------------------------------------------------------------- */
132
133 #include <linux/module.h>
134 #include <linux/kernel.h>
135 #include <linux/ptrace.h>
136 #include <linux/slab.h>
137 #include <linux/string.h>
138 #include <linux/timer.h>
139 #include <linux/interrupt.h>
140 #include <linux/in.h>
141 #include <linux/delay.h>
142 #include <linux/ethtool.h>
143 #include <linux/netdevice.h>
144 #include <linux/etherdevice.h>
145 #include <linux/skbuff.h>
146 #include <linux/if_arp.h>
147 #include <linux/ioport.h>
148 #include <linux/bitops.h>
149
150 #include <pcmcia/cisreg.h>
151 #include <pcmcia/cistpl.h>
152 #include <pcmcia/ds.h>
153
154 #include <asm/uaccess.h>
155 #include <asm/io.h>
156
157 /* ----------------------------------------------------------------------------
158 Defines
159 ---------------------------------------------------------------------------- */
160
161 #define MACE_LADRF_LEN                  8
162                                         /* 8 bytes in Logical Address Filter */
163
164 /* Loop Control Defines */
165 #define MACE_MAX_IR_ITERATIONS          10
166 #define MACE_MAX_RX_ITERATIONS          12
167         /*
168         TBD: Dean brought this up, and I assumed the hardware would
169         handle it:
170
171         If MACE_MAX_RX_ITERATIONS is > 1, rx_framecnt may still be
172         non-zero when the isr exits.  We may not get another interrupt
173         to process the remaining packets for some time.
174         */
175
176 /*
177 The Am2150 has a Xilinx XC3042 field programmable gate array (FPGA)
178 which manages the interface between the MACE and the PCMCIA bus.  It
179 also includes buffer management for the 32K x 8 SRAM to control up to
180 four transmit and 12 receive frames at a time.
181 */
182 #define AM2150_MAX_TX_FRAMES            4
183 #define AM2150_MAX_RX_FRAMES            12
184
185 /* Am2150 Ethernet Card I/O Mapping */
186 #define AM2150_RCV                      0x00
187 #define AM2150_XMT                      0x04
188 #define AM2150_XMT_SKIP                 0x09
189 #define AM2150_RCV_NEXT                 0x0A
190 #define AM2150_RCV_FRAME_COUNT          0x0B
191 #define AM2150_MACE_BANK                0x0C
192 #define AM2150_MACE_BASE                0x10
193
194 /* MACE Registers */
195 #define MACE_RCVFIFO                    0
196 #define MACE_XMTFIFO                    1
197 #define MACE_XMTFC                      2
198 #define MACE_XMTFS                      3
199 #define MACE_XMTRC                      4
200 #define MACE_RCVFC                      5
201 #define MACE_RCVFS                      6
202 #define MACE_FIFOFC                     7
203 #define MACE_IR                         8
204 #define MACE_IMR                        9
205 #define MACE_PR                         10
206 #define MACE_BIUCC                      11
207 #define MACE_FIFOCC                     12
208 #define MACE_MACCC                      13
209 #define MACE_PLSCC                      14
210 #define MACE_PHYCC                      15
211 #define MACE_CHIPIDL                    16
212 #define MACE_CHIPIDH                    17
213 #define MACE_IAC                        18
214 /* Reserved */
215 #define MACE_LADRF                      20
216 #define MACE_PADR                       21
217 /* Reserved */
218 /* Reserved */
219 #define MACE_MPC                        24
220 /* Reserved */
221 #define MACE_RNTPC                      26
222 #define MACE_RCVCC                      27
223 /* Reserved */
224 #define MACE_UTR                        29
225 #define MACE_RTR1                       30
226 #define MACE_RTR2                       31
227
228 /* MACE Bit Masks */
229 #define MACE_XMTRC_EXDEF                0x80
230 #define MACE_XMTRC_XMTRC                0x0F
231
232 #define MACE_XMTFS_XMTSV                0x80
233 #define MACE_XMTFS_UFLO                 0x40
234 #define MACE_XMTFS_LCOL                 0x20
235 #define MACE_XMTFS_MORE                 0x10
236 #define MACE_XMTFS_ONE                  0x08
237 #define MACE_XMTFS_DEFER                0x04
238 #define MACE_XMTFS_LCAR                 0x02
239 #define MACE_XMTFS_RTRY                 0x01
240
241 #define MACE_RCVFS_RCVSTS               0xF000
242 #define MACE_RCVFS_OFLO                 0x8000
243 #define MACE_RCVFS_CLSN                 0x4000
244 #define MACE_RCVFS_FRAM                 0x2000
245 #define MACE_RCVFS_FCS                  0x1000
246
247 #define MACE_FIFOFC_RCVFC               0xF0
248 #define MACE_FIFOFC_XMTFC               0x0F
249
250 #define MACE_IR_JAB                     0x80
251 #define MACE_IR_BABL                    0x40
252 #define MACE_IR_CERR                    0x20
253 #define MACE_IR_RCVCCO                  0x10
254 #define MACE_IR_RNTPCO                  0x08
255 #define MACE_IR_MPCO                    0x04
256 #define MACE_IR_RCVINT                  0x02
257 #define MACE_IR_XMTINT                  0x01
258
259 #define MACE_MACCC_PROM                 0x80
260 #define MACE_MACCC_DXMT2PD              0x40
261 #define MACE_MACCC_EMBA                 0x20
262 #define MACE_MACCC_RESERVED             0x10
263 #define MACE_MACCC_DRCVPA               0x08
264 #define MACE_MACCC_DRCVBC               0x04
265 #define MACE_MACCC_ENXMT                0x02
266 #define MACE_MACCC_ENRCV                0x01
267
268 #define MACE_PHYCC_LNKFL                0x80
269 #define MACE_PHYCC_DLNKTST              0x40
270 #define MACE_PHYCC_REVPOL               0x20
271 #define MACE_PHYCC_DAPC                 0x10
272 #define MACE_PHYCC_LRT                  0x08
273 #define MACE_PHYCC_ASEL                 0x04
274 #define MACE_PHYCC_RWAKE                0x02
275 #define MACE_PHYCC_AWAKE                0x01
276
277 #define MACE_IAC_ADDRCHG                0x80
278 #define MACE_IAC_PHYADDR                0x04
279 #define MACE_IAC_LOGADDR                0x02
280
281 #define MACE_UTR_RTRE                   0x80
282 #define MACE_UTR_RTRD                   0x40
283 #define MACE_UTR_RPA                    0x20
284 #define MACE_UTR_FCOLL                  0x10
285 #define MACE_UTR_RCVFCSE                0x08
286 #define MACE_UTR_LOOP_INCL_MENDEC       0x06
287 #define MACE_UTR_LOOP_NO_MENDEC         0x04
288 #define MACE_UTR_LOOP_EXTERNAL          0x02
289 #define MACE_UTR_LOOP_NONE              0x00
290 #define MACE_UTR_RESERVED               0x01
291
292 /* Switch MACE register bank (only 0 and 1 are valid) */
293 #define MACEBANK(win_num) outb((win_num), ioaddr + AM2150_MACE_BANK)
294
295 #define MACE_IMR_DEFAULT \
296   (0xFF - \
297     ( \
298       MACE_IR_CERR | \
299       MACE_IR_RCVCCO | \
300       MACE_IR_RNTPCO | \
301       MACE_IR_MPCO | \
302       MACE_IR_RCVINT | \
303       MACE_IR_XMTINT \
304     ) \
305   )
306 #undef MACE_IMR_DEFAULT
307 #define MACE_IMR_DEFAULT 0x00 /* New statistics handling: grab everything */
308
309 #define TX_TIMEOUT              ((400*HZ)/1000)
310
311 /* ----------------------------------------------------------------------------
312 Type Definitions
313 ---------------------------------------------------------------------------- */
314
315 typedef struct _mace_statistics {
316     /* MACE_XMTFS */
317     int xmtsv;
318     int uflo;
319     int lcol;
320     int more;
321     int one;
322     int defer;
323     int lcar;
324     int rtry;
325
326     /* MACE_XMTRC */
327     int exdef;
328     int xmtrc;
329
330     /* RFS1--Receive Status (RCVSTS) */
331     int oflo;
332     int clsn;
333     int fram;
334     int fcs;
335
336     /* RFS2--Runt Packet Count (RNTPC) */
337     int rfs_rntpc;
338
339     /* RFS3--Receive Collision Count (RCVCC) */
340     int rfs_rcvcc;
341
342     /* MACE_IR */
343     int jab;
344     int babl;
345     int cerr;
346     int rcvcco;
347     int rntpco;
348     int mpco;
349
350     /* MACE_MPC */
351     int mpc;
352
353     /* MACE_RNTPC */
354     int rntpc;
355
356     /* MACE_RCVCC */
357     int rcvcc;
358 } mace_statistics;
359
360 typedef struct _mace_private {
361         struct pcmcia_device    *p_dev;
362     struct net_device_stats linux_stats; /* Linux statistics counters */
363     mace_statistics mace_stats; /* MACE chip statistics counters */
364
365     /* restore_multicast_list() state variables */
366     int multicast_ladrf[MACE_LADRF_LEN]; /* Logical address filter */
367     int multicast_num_addrs;
368
369     char tx_free_frames; /* Number of free transmit frame buffers */
370     char tx_irq_disabled; /* MACE TX interrupt disabled */
371     
372     spinlock_t bank_lock; /* Must be held if you step off bank 0 */
373 } mace_private;
374
375 /* ----------------------------------------------------------------------------
376 Private Global Variables
377 ---------------------------------------------------------------------------- */
378
379 static const char *if_names[]={
380     "Auto", "10baseT", "BNC",
381 };
382
383 /* ----------------------------------------------------------------------------
384 Parameters
385         These are the parameters that can be set during loading with
386         'insmod'.
387 ---------------------------------------------------------------------------- */
388
389 MODULE_DESCRIPTION("New Media PCMCIA ethernet driver");
390 MODULE_LICENSE("GPL");
391
392 #define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
393
394 /* 0=auto, 1=10baseT, 2 = 10base2, default=auto */
395 INT_MODULE_PARM(if_port, 0);
396
397
398 /* ----------------------------------------------------------------------------
399 Function Prototypes
400 ---------------------------------------------------------------------------- */
401
402 static int nmclan_config(struct pcmcia_device *link);
403 static void nmclan_release(struct pcmcia_device *link);
404
405 static void nmclan_reset(struct net_device *dev);
406 static int mace_config(struct net_device *dev, struct ifmap *map);
407 static int mace_open(struct net_device *dev);
408 static int mace_close(struct net_device *dev);
409 static netdev_tx_t mace_start_xmit(struct sk_buff *skb,
410                                          struct net_device *dev);
411 static void mace_tx_timeout(struct net_device *dev);
412 static irqreturn_t mace_interrupt(int irq, void *dev_id);
413 static struct net_device_stats *mace_get_stats(struct net_device *dev);
414 static int mace_rx(struct net_device *dev, unsigned char RxCnt);
415 static void restore_multicast_list(struct net_device *dev);
416 static void set_multicast_list(struct net_device *dev);
417 static const struct ethtool_ops netdev_ethtool_ops;
418
419
420 static void nmclan_detach(struct pcmcia_device *p_dev);
421
422 static const struct net_device_ops mace_netdev_ops = {
423         .ndo_open               = mace_open,
424         .ndo_stop               = mace_close,
425         .ndo_start_xmit         = mace_start_xmit,
426         .ndo_tx_timeout         = mace_tx_timeout,
427         .ndo_set_config         = mace_config,
428         .ndo_get_stats          = mace_get_stats,
429         .ndo_set_rx_mode        = set_multicast_list,
430         .ndo_change_mtu         = eth_change_mtu,
431         .ndo_set_mac_address    = eth_mac_addr,
432         .ndo_validate_addr      = eth_validate_addr,
433 };
434
435 static int nmclan_probe(struct pcmcia_device *link)
436 {
437     mace_private *lp;
438     struct net_device *dev;
439
440     dev_dbg(&link->dev, "nmclan_attach()\n");
441
442     /* Create new ethernet device */
443     dev = alloc_etherdev(sizeof(mace_private));
444     if (!dev)
445             return -ENOMEM;
446     lp = netdev_priv(dev);
447     lp->p_dev = link;
448     link->priv = dev;
449     
450     spin_lock_init(&lp->bank_lock);
451     link->resource[0]->end = 32;
452     link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
453     link->config_flags |= CONF_ENABLE_IRQ;
454     link->config_index = 1;
455     link->config_regs = PRESENT_OPTION;
456
457     lp->tx_free_frames=AM2150_MAX_TX_FRAMES;
458
459     dev->netdev_ops = &mace_netdev_ops;
460     dev->ethtool_ops = &netdev_ethtool_ops;
461     dev->watchdog_timeo = TX_TIMEOUT;
462
463     return nmclan_config(link);
464 } /* nmclan_attach */
465
466 static void nmclan_detach(struct pcmcia_device *link)
467 {
468     struct net_device *dev = link->priv;
469
470     dev_dbg(&link->dev, "nmclan_detach\n");
471
472     unregister_netdev(dev);
473
474     nmclan_release(link);
475
476     free_netdev(dev);
477 } /* nmclan_detach */
478
479 /* ----------------------------------------------------------------------------
480 mace_read
481         Reads a MACE register.  This is bank independent; however, the
482         caller must ensure that this call is not interruptable.  We are
483         assuming that during normal operation, the MACE is always in
484         bank 0.
485 ---------------------------------------------------------------------------- */
486 static int mace_read(mace_private *lp, unsigned int ioaddr, int reg)
487 {
488   int data = 0xFF;
489   unsigned long flags;
490
491   switch (reg >> 4) {
492     case 0: /* register 0-15 */
493       data = inb(ioaddr + AM2150_MACE_BASE + reg);
494       break;
495     case 1: /* register 16-31 */
496       spin_lock_irqsave(&lp->bank_lock, flags);
497       MACEBANK(1);
498       data = inb(ioaddr + AM2150_MACE_BASE + (reg & 0x0F));
499       MACEBANK(0);
500       spin_unlock_irqrestore(&lp->bank_lock, flags);
501       break;
502   }
503   return data & 0xFF;
504 } /* mace_read */
505
506 /* ----------------------------------------------------------------------------
507 mace_write
508         Writes to a MACE register.  This is bank independent; however,
509         the caller must ensure that this call is not interruptable.  We
510         are assuming that during normal operation, the MACE is always in
511         bank 0.
512 ---------------------------------------------------------------------------- */
513 static void mace_write(mace_private *lp, unsigned int ioaddr, int reg,
514                        int data)
515 {
516   unsigned long flags;
517
518   switch (reg >> 4) {
519     case 0: /* register 0-15 */
520       outb(data & 0xFF, ioaddr + AM2150_MACE_BASE + reg);
521       break;
522     case 1: /* register 16-31 */
523       spin_lock_irqsave(&lp->bank_lock, flags);
524       MACEBANK(1);
525       outb(data & 0xFF, ioaddr + AM2150_MACE_BASE + (reg & 0x0F));
526       MACEBANK(0);
527       spin_unlock_irqrestore(&lp->bank_lock, flags);
528       break;
529   }
530 } /* mace_write */
531
532 /* ----------------------------------------------------------------------------
533 mace_init
534         Resets the MACE chip.
535 ---------------------------------------------------------------------------- */
536 static int mace_init(mace_private *lp, unsigned int ioaddr, char *enet_addr)
537 {
538   int i;
539   int ct = 0;
540
541   /* MACE Software reset */
542   mace_write(lp, ioaddr, MACE_BIUCC, 1);
543   while (mace_read(lp, ioaddr, MACE_BIUCC) & 0x01) {
544     /* Wait for reset bit to be cleared automatically after <= 200ns */;
545     if(++ct > 500)
546     {
547         pr_err("reset failed, card removed?\n");
548         return -1;
549     }
550     udelay(1);
551   }
552   mace_write(lp, ioaddr, MACE_BIUCC, 0);
553
554   /* The Am2150 requires that the MACE FIFOs operate in burst mode. */
555   mace_write(lp, ioaddr, MACE_FIFOCC, 0x0F);
556
557   mace_write(lp,ioaddr, MACE_RCVFC, 0); /* Disable Auto Strip Receive */
558   mace_write(lp, ioaddr, MACE_IMR, 0xFF); /* Disable all interrupts until _open */
559
560   /*
561    * Bit 2-1 PORTSEL[1-0] Port Select.
562    * 00 AUI/10Base-2
563    * 01 10Base-T
564    * 10 DAI Port (reserved in Am2150)
565    * 11 GPSI
566    * For this card, only the first two are valid.
567    * So, PLSCC should be set to
568    * 0x00 for 10Base-2
569    * 0x02 for 10Base-T
570    * Or just set ASEL in PHYCC below!
571    */
572   switch (if_port) {
573     case 1:
574       mace_write(lp, ioaddr, MACE_PLSCC, 0x02);
575       break;
576     case 2:
577       mace_write(lp, ioaddr, MACE_PLSCC, 0x00);
578       break;
579     default:
580       mace_write(lp, ioaddr, MACE_PHYCC, /* ASEL */ 4);
581       /* ASEL Auto Select.  When set, the PORTSEL[1-0] bits are overridden,
582          and the MACE device will automatically select the operating media
583          interface port. */
584       break;
585   }
586
587   mace_write(lp, ioaddr, MACE_IAC, MACE_IAC_ADDRCHG | MACE_IAC_PHYADDR);
588   /* Poll ADDRCHG bit */
589   ct = 0;
590   while (mace_read(lp, ioaddr, MACE_IAC) & MACE_IAC_ADDRCHG)
591   {
592         if(++ ct > 500)
593         {
594                 pr_err("ADDRCHG timeout, card removed?\n");
595                 return -1;
596         }
597   }
598   /* Set PADR register */
599   for (i = 0; i < ETH_ALEN; i++)
600     mace_write(lp, ioaddr, MACE_PADR, enet_addr[i]);
601
602   /* MAC Configuration Control Register should be written last */
603   /* Let set_multicast_list set this. */
604   /* mace_write(lp, ioaddr, MACE_MACCC, MACE_MACCC_ENXMT | MACE_MACCC_ENRCV); */
605   mace_write(lp, ioaddr, MACE_MACCC, 0x00);
606   return 0;
607 } /* mace_init */
608
609 static int nmclan_config(struct pcmcia_device *link)
610 {
611   struct net_device *dev = link->priv;
612   mace_private *lp = netdev_priv(dev);
613   u8 *buf;
614   size_t len;
615   int i, ret;
616   unsigned int ioaddr;
617
618   dev_dbg(&link->dev, "nmclan_config\n");
619
620   link->io_lines = 5;
621   ret = pcmcia_request_io(link);
622   if (ret)
623           goto failed;
624   ret = pcmcia_request_irq(link, mace_interrupt);
625   if (ret)
626           goto failed;
627   ret = pcmcia_enable_device(link);
628   if (ret)
629           goto failed;
630
631   dev->irq = link->irq;
632   dev->base_addr = link->resource[0]->start;
633
634   ioaddr = dev->base_addr;
635
636   /* Read the ethernet address from the CIS. */
637   len = pcmcia_get_tuple(link, 0x80, &buf);
638   if (!buf || len < ETH_ALEN) {
639           kfree(buf);
640           goto failed;
641   }
642   memcpy(dev->dev_addr, buf, ETH_ALEN);
643   kfree(buf);
644
645   /* Verify configuration by reading the MACE ID. */
646   {
647     char sig[2];
648
649     sig[0] = mace_read(lp, ioaddr, MACE_CHIPIDL);
650     sig[1] = mace_read(lp, ioaddr, MACE_CHIPIDH);
651     if ((sig[0] == 0x40) && ((sig[1] & 0x0F) == 0x09)) {
652       dev_dbg(&link->dev, "nmclan_cs configured: mace id=%x %x\n",
653             sig[0], sig[1]);
654     } else {
655       pr_notice("mace id not found: %x %x should be 0x40 0x?9\n",
656                 sig[0], sig[1]);
657       return -ENODEV;
658     }
659   }
660
661   if(mace_init(lp, ioaddr, dev->dev_addr) == -1)
662         goto failed;
663
664   /* The if_port symbol can be set when the module is loaded */
665   if (if_port <= 2)
666     dev->if_port = if_port;
667   else
668     pr_notice("invalid if_port requested\n");
669
670   SET_NETDEV_DEV(dev, &link->dev);
671
672   i = register_netdev(dev);
673   if (i != 0) {
674     pr_notice("register_netdev() failed\n");
675     goto failed;
676   }
677
678   netdev_info(dev, "nmclan: port %#3lx, irq %d, %s port, hw_addr %pM\n",
679               dev->base_addr, dev->irq, if_names[dev->if_port], dev->dev_addr);
680   return 0;
681
682 failed:
683         nmclan_release(link);
684         return -ENODEV;
685 } /* nmclan_config */
686
687 static void nmclan_release(struct pcmcia_device *link)
688 {
689         dev_dbg(&link->dev, "nmclan_release\n");
690         pcmcia_disable_device(link);
691 }
692
693 static int nmclan_suspend(struct pcmcia_device *link)
694 {
695         struct net_device *dev = link->priv;
696
697         if (link->open)
698                 netif_device_detach(dev);
699
700         return 0;
701 }
702
703 static int nmclan_resume(struct pcmcia_device *link)
704 {
705         struct net_device *dev = link->priv;
706
707         if (link->open) {
708                 nmclan_reset(dev);
709                 netif_device_attach(dev);
710         }
711
712         return 0;
713 }
714
715
716 /* ----------------------------------------------------------------------------
717 nmclan_reset
718         Reset and restore all of the Xilinx and MACE registers.
719 ---------------------------------------------------------------------------- */
720 static void nmclan_reset(struct net_device *dev)
721 {
722   mace_private *lp = netdev_priv(dev);
723
724 #if RESET_XILINX
725   struct pcmcia_device *link = &lp->link;
726   u8 OrigCorValue;
727
728   /* Save original COR value */
729   pcmcia_read_config_byte(link, CISREG_COR, &OrigCorValue);
730
731   /* Reset Xilinx */
732   dev_dbg(&link->dev, "nmclan_reset: OrigCorValue=0x%x, resetting...\n",
733         OrigCorValue);
734   pcmcia_write_config_byte(link, CISREG_COR, COR_SOFT_RESET);
735   /* Need to wait for 20 ms for PCMCIA to finish reset. */
736
737   /* Restore original COR configuration index */
738   pcmcia_write_config_byte(link, CISREG_COR,
739                           (COR_LEVEL_REQ | (OrigCorValue & COR_CONFIG_MASK)));
740   /* Xilinx is now completely reset along with the MACE chip. */
741   lp->tx_free_frames=AM2150_MAX_TX_FRAMES;
742
743 #endif /* #if RESET_XILINX */
744
745   /* Xilinx is now completely reset along with the MACE chip. */
746   lp->tx_free_frames=AM2150_MAX_TX_FRAMES;
747
748   /* Reinitialize the MACE chip for operation. */
749   mace_init(lp, dev->base_addr, dev->dev_addr);
750   mace_write(lp, dev->base_addr, MACE_IMR, MACE_IMR_DEFAULT);
751
752   /* Restore the multicast list and enable TX and RX. */
753   restore_multicast_list(dev);
754 } /* nmclan_reset */
755
756 /* ----------------------------------------------------------------------------
757 mace_config
758         [Someone tell me what this is supposed to do?  Is if_port a defined
759         standard?  If so, there should be defines to indicate 1=10Base-T,
760         2=10Base-2, etc. including limited automatic detection.]
761 ---------------------------------------------------------------------------- */
762 static int mace_config(struct net_device *dev, struct ifmap *map)
763 {
764   if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) {
765     if (map->port <= 2) {
766       dev->if_port = map->port;
767       netdev_info(dev, "switched to %s port\n", if_names[dev->if_port]);
768     } else
769       return -EINVAL;
770   }
771   return 0;
772 } /* mace_config */
773
774 /* ----------------------------------------------------------------------------
775 mace_open
776         Open device driver.
777 ---------------------------------------------------------------------------- */
778 static int mace_open(struct net_device *dev)
779 {
780   unsigned int ioaddr = dev->base_addr;
781   mace_private *lp = netdev_priv(dev);
782   struct pcmcia_device *link = lp->p_dev;
783
784   if (!pcmcia_dev_present(link))
785     return -ENODEV;
786
787   link->open++;
788
789   MACEBANK(0);
790
791   netif_start_queue(dev);
792   nmclan_reset(dev);
793
794   return 0; /* Always succeed */
795 } /* mace_open */
796
797 /* ----------------------------------------------------------------------------
798 mace_close
799         Closes device driver.
800 ---------------------------------------------------------------------------- */
801 static int mace_close(struct net_device *dev)
802 {
803   unsigned int ioaddr = dev->base_addr;
804   mace_private *lp = netdev_priv(dev);
805   struct pcmcia_device *link = lp->p_dev;
806
807   dev_dbg(&link->dev, "%s: shutting down ethercard.\n", dev->name);
808
809   /* Mask off all interrupts from the MACE chip. */
810   outb(0xFF, ioaddr + AM2150_MACE_BASE + MACE_IMR);
811
812   link->open--;
813   netif_stop_queue(dev);
814
815   return 0;
816 } /* mace_close */
817
818 static void netdev_get_drvinfo(struct net_device *dev,
819                                struct ethtool_drvinfo *info)
820 {
821         strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
822         strlcpy(info->version, DRV_VERSION, sizeof(info->version));
823         snprintf(info->bus_info, sizeof(info->bus_info),
824                 "PCMCIA 0x%lx", dev->base_addr);
825 }
826
827 static const struct ethtool_ops netdev_ethtool_ops = {
828         .get_drvinfo            = netdev_get_drvinfo,
829 };
830
831 /* ----------------------------------------------------------------------------
832 mace_start_xmit
833         This routine begins the packet transmit function.  When completed,
834         it will generate a transmit interrupt.
835
836         According to /usr/src/linux/net/inet/dev.c, if _start_xmit
837         returns 0, the "packet is now solely the responsibility of the
838         driver."  If _start_xmit returns non-zero, the "transmission
839         failed, put skb back into a list."
840 ---------------------------------------------------------------------------- */
841
842 static void mace_tx_timeout(struct net_device *dev)
843 {
844   mace_private *lp = netdev_priv(dev);
845   struct pcmcia_device *link = lp->p_dev;
846
847   netdev_notice(dev, "transmit timed out -- ");
848 #if RESET_ON_TIMEOUT
849   pr_cont("resetting card\n");
850   pcmcia_reset_card(link->socket);
851 #else /* #if RESET_ON_TIMEOUT */
852   pr_cont("NOT resetting card\n");
853 #endif /* #if RESET_ON_TIMEOUT */
854   dev->trans_start = jiffies; /* prevent tx timeout */
855   netif_wake_queue(dev);
856 }
857
858 static netdev_tx_t mace_start_xmit(struct sk_buff *skb,
859                                          struct net_device *dev)
860 {
861   mace_private *lp = netdev_priv(dev);
862   unsigned int ioaddr = dev->base_addr;
863
864   netif_stop_queue(dev);
865
866   pr_debug("%s: mace_start_xmit(length = %ld) called.\n",
867         dev->name, (long)skb->len);
868
869 #if (!TX_INTERRUPTABLE)
870   /* Disable MACE TX interrupts. */
871   outb(MACE_IMR_DEFAULT | MACE_IR_XMTINT,
872     ioaddr + AM2150_MACE_BASE + MACE_IMR);
873   lp->tx_irq_disabled=1;
874 #endif /* #if (!TX_INTERRUPTABLE) */
875
876   {
877     /* This block must not be interrupted by another transmit request!
878        mace_tx_timeout will take care of timer-based retransmissions from
879        the upper layers.  The interrupt handler is guaranteed never to
880        service a transmit interrupt while we are in here.
881     */
882
883     lp->linux_stats.tx_bytes += skb->len;
884     lp->tx_free_frames--;
885
886     /* WARNING: Write the _exact_ number of bytes written in the header! */
887     /* Put out the word header [must be an outw()] . . . */
888     outw(skb->len, ioaddr + AM2150_XMT);
889     /* . . . and the packet [may be any combination of outw() and outb()] */
890     outsw(ioaddr + AM2150_XMT, skb->data, skb->len >> 1);
891     if (skb->len & 1) {
892       /* Odd byte transfer */
893       outb(skb->data[skb->len-1], ioaddr + AM2150_XMT);
894     }
895
896 #if MULTI_TX
897     if (lp->tx_free_frames > 0)
898       netif_start_queue(dev);
899 #endif /* #if MULTI_TX */
900   }
901
902 #if (!TX_INTERRUPTABLE)
903   /* Re-enable MACE TX interrupts. */
904   lp->tx_irq_disabled=0;
905   outb(MACE_IMR_DEFAULT, ioaddr + AM2150_MACE_BASE + MACE_IMR);
906 #endif /* #if (!TX_INTERRUPTABLE) */
907
908   dev_kfree_skb(skb);
909
910   return NETDEV_TX_OK;
911 } /* mace_start_xmit */
912
913 /* ----------------------------------------------------------------------------
914 mace_interrupt
915         The interrupt handler.
916 ---------------------------------------------------------------------------- */
917 static irqreturn_t mace_interrupt(int irq, void *dev_id)
918 {
919   struct net_device *dev = (struct net_device *) dev_id;
920   mace_private *lp = netdev_priv(dev);
921   unsigned int ioaddr;
922   int status;
923   int IntrCnt = MACE_MAX_IR_ITERATIONS;
924
925   if (dev == NULL) {
926     pr_debug("mace_interrupt(): irq 0x%X for unknown device.\n",
927           irq);
928     return IRQ_NONE;
929   }
930
931   ioaddr = dev->base_addr;
932
933   if (lp->tx_irq_disabled) {
934     const char *msg;
935     if (lp->tx_irq_disabled)
936       msg = "Interrupt with tx_irq_disabled";
937     else
938       msg = "Re-entering the interrupt handler";
939     netdev_notice(dev, "%s [isr=%02X, imr=%02X]\n",
940                   msg,
941                   inb(ioaddr + AM2150_MACE_BASE + MACE_IR),
942                   inb(ioaddr + AM2150_MACE_BASE + MACE_IMR));
943     /* WARNING: MACE_IR has been read! */
944     return IRQ_NONE;
945   }
946
947   if (!netif_device_present(dev)) {
948     netdev_dbg(dev, "interrupt from dead card\n");
949     return IRQ_NONE;
950   }
951
952   do {
953     /* WARNING: MACE_IR is a READ/CLEAR port! */
954     status = inb(ioaddr + AM2150_MACE_BASE + MACE_IR);
955
956     pr_debug("mace_interrupt: irq 0x%X status 0x%X.\n", irq, status);
957
958     if (status & MACE_IR_RCVINT) {
959       mace_rx(dev, MACE_MAX_RX_ITERATIONS);
960     }
961
962     if (status & MACE_IR_XMTINT) {
963       unsigned char fifofc;
964       unsigned char xmtrc;
965       unsigned char xmtfs;
966
967       fifofc = inb(ioaddr + AM2150_MACE_BASE + MACE_FIFOFC);
968       if ((fifofc & MACE_FIFOFC_XMTFC)==0) {
969         lp->linux_stats.tx_errors++;
970         outb(0xFF, ioaddr + AM2150_XMT_SKIP);
971       }
972
973       /* Transmit Retry Count (XMTRC, reg 4) */
974       xmtrc = inb(ioaddr + AM2150_MACE_BASE + MACE_XMTRC);
975       if (xmtrc & MACE_XMTRC_EXDEF) lp->mace_stats.exdef++;
976       lp->mace_stats.xmtrc += (xmtrc & MACE_XMTRC_XMTRC);
977
978       if (
979         (xmtfs = inb(ioaddr + AM2150_MACE_BASE + MACE_XMTFS)) &
980         MACE_XMTFS_XMTSV /* Transmit Status Valid */
981       ) {
982         lp->mace_stats.xmtsv++;
983
984         if (xmtfs & ~MACE_XMTFS_XMTSV) {
985           if (xmtfs & MACE_XMTFS_UFLO) {
986             /* Underflow.  Indicates that the Transmit FIFO emptied before
987                the end of frame was reached. */
988             lp->mace_stats.uflo++;
989           }
990           if (xmtfs & MACE_XMTFS_LCOL) {
991             /* Late Collision */
992             lp->mace_stats.lcol++;
993           }
994           if (xmtfs & MACE_XMTFS_MORE) {
995             /* MORE than one retry was needed */
996             lp->mace_stats.more++;
997           }
998           if (xmtfs & MACE_XMTFS_ONE) {
999             /* Exactly ONE retry occurred */
1000             lp->mace_stats.one++;
1001           }
1002           if (xmtfs & MACE_XMTFS_DEFER) {
1003             /* Transmission was defered */
1004             lp->mace_stats.defer++;
1005           }
1006           if (xmtfs & MACE_XMTFS_LCAR) {
1007             /* Loss of carrier */
1008             lp->mace_stats.lcar++;
1009           }
1010           if (xmtfs & MACE_XMTFS_RTRY) {
1011             /* Retry error: transmit aborted after 16 attempts */
1012             lp->mace_stats.rtry++;
1013           }
1014         } /* if (xmtfs & ~MACE_XMTFS_XMTSV) */
1015
1016       } /* if (xmtfs & MACE_XMTFS_XMTSV) */
1017
1018       lp->linux_stats.tx_packets++;
1019       lp->tx_free_frames++;
1020       netif_wake_queue(dev);
1021     } /* if (status & MACE_IR_XMTINT) */
1022
1023     if (status & ~MACE_IMR_DEFAULT & ~MACE_IR_RCVINT & ~MACE_IR_XMTINT) {
1024       if (status & MACE_IR_JAB) {
1025         /* Jabber Error.  Excessive transmit duration (20-150ms). */
1026         lp->mace_stats.jab++;
1027       }
1028       if (status & MACE_IR_BABL) {
1029         /* Babble Error.  >1518 bytes transmitted. */
1030         lp->mace_stats.babl++;
1031       }
1032       if (status & MACE_IR_CERR) {
1033         /* Collision Error.  CERR indicates the absence of the
1034            Signal Quality Error Test message after a packet
1035            transmission. */
1036         lp->mace_stats.cerr++;
1037       }
1038       if (status & MACE_IR_RCVCCO) {
1039         /* Receive Collision Count Overflow; */
1040         lp->mace_stats.rcvcco++;
1041       }
1042       if (status & MACE_IR_RNTPCO) {
1043         /* Runt Packet Count Overflow */
1044         lp->mace_stats.rntpco++;
1045       }
1046       if (status & MACE_IR_MPCO) {
1047         /* Missed Packet Count Overflow */
1048         lp->mace_stats.mpco++;
1049       }
1050     } /* if (status & ~MACE_IMR_DEFAULT & ~MACE_IR_RCVINT & ~MACE_IR_XMTINT) */
1051
1052   } while ((status & ~MACE_IMR_DEFAULT) && (--IntrCnt));
1053
1054   return IRQ_HANDLED;
1055 } /* mace_interrupt */
1056
1057 /* ----------------------------------------------------------------------------
1058 mace_rx
1059         Receives packets.
1060 ---------------------------------------------------------------------------- */
1061 static int mace_rx(struct net_device *dev, unsigned char RxCnt)
1062 {
1063   mace_private *lp = netdev_priv(dev);
1064   unsigned int ioaddr = dev->base_addr;
1065   unsigned char rx_framecnt;
1066   unsigned short rx_status;
1067
1068   while (
1069     ((rx_framecnt = inb(ioaddr + AM2150_RCV_FRAME_COUNT)) > 0) &&
1070     (rx_framecnt <= 12) && /* rx_framecnt==0xFF if card is extracted. */
1071     (RxCnt--)
1072   ) {
1073     rx_status = inw(ioaddr + AM2150_RCV);
1074
1075     pr_debug("%s: in mace_rx(), framecnt 0x%X, rx_status"
1076           " 0x%X.\n", dev->name, rx_framecnt, rx_status);
1077
1078     if (rx_status & MACE_RCVFS_RCVSTS) { /* Error, update stats. */
1079       lp->linux_stats.rx_errors++;
1080       if (rx_status & MACE_RCVFS_OFLO) {
1081         lp->mace_stats.oflo++;
1082       }
1083       if (rx_status & MACE_RCVFS_CLSN) {
1084         lp->mace_stats.clsn++;
1085       }
1086       if (rx_status & MACE_RCVFS_FRAM) {
1087         lp->mace_stats.fram++;
1088       }
1089       if (rx_status & MACE_RCVFS_FCS) {
1090         lp->mace_stats.fcs++;
1091       }
1092     } else {
1093       short pkt_len = (rx_status & ~MACE_RCVFS_RCVSTS) - 4;
1094         /* Auto Strip is off, always subtract 4 */
1095       struct sk_buff *skb;
1096
1097       lp->mace_stats.rfs_rntpc += inb(ioaddr + AM2150_RCV);
1098         /* runt packet count */
1099       lp->mace_stats.rfs_rcvcc += inb(ioaddr + AM2150_RCV);
1100         /* rcv collision count */
1101
1102       pr_debug("    receiving packet size 0x%X rx_status"
1103             " 0x%X.\n", pkt_len, rx_status);
1104
1105       skb = netdev_alloc_skb(dev, pkt_len + 2);
1106
1107       if (skb != NULL) {
1108         skb_reserve(skb, 2);
1109         insw(ioaddr + AM2150_RCV, skb_put(skb, pkt_len), pkt_len>>1);
1110         if (pkt_len & 1)
1111             *(skb_tail_pointer(skb) - 1) = inb(ioaddr + AM2150_RCV);
1112         skb->protocol = eth_type_trans(skb, dev);
1113         
1114         netif_rx(skb); /* Send the packet to the upper (protocol) layers. */
1115
1116         lp->linux_stats.rx_packets++;
1117         lp->linux_stats.rx_bytes += pkt_len;
1118         outb(0xFF, ioaddr + AM2150_RCV_NEXT); /* skip to next frame */
1119         continue;
1120       } else {
1121         pr_debug("%s: couldn't allocate a sk_buff of size"
1122               " %d.\n", dev->name, pkt_len);
1123         lp->linux_stats.rx_dropped++;
1124       }
1125     }
1126     outb(0xFF, ioaddr + AM2150_RCV_NEXT); /* skip to next frame */
1127   } /* while */
1128
1129   return 0;
1130 } /* mace_rx */
1131
1132 /* ----------------------------------------------------------------------------
1133 pr_linux_stats
1134 ---------------------------------------------------------------------------- */
1135 static void pr_linux_stats(struct net_device_stats *pstats)
1136 {
1137   pr_debug("pr_linux_stats\n");
1138   pr_debug(" rx_packets=%-7ld        tx_packets=%ld\n",
1139         (long)pstats->rx_packets, (long)pstats->tx_packets);
1140   pr_debug(" rx_errors=%-7ld         tx_errors=%ld\n",
1141         (long)pstats->rx_errors, (long)pstats->tx_errors);
1142   pr_debug(" rx_dropped=%-7ld        tx_dropped=%ld\n",
1143         (long)pstats->rx_dropped, (long)pstats->tx_dropped);
1144   pr_debug(" multicast=%-7ld         collisions=%ld\n",
1145         (long)pstats->multicast, (long)pstats->collisions);
1146
1147   pr_debug(" rx_length_errors=%-7ld  rx_over_errors=%ld\n",
1148         (long)pstats->rx_length_errors, (long)pstats->rx_over_errors);
1149   pr_debug(" rx_crc_errors=%-7ld     rx_frame_errors=%ld\n",
1150         (long)pstats->rx_crc_errors, (long)pstats->rx_frame_errors);
1151   pr_debug(" rx_fifo_errors=%-7ld    rx_missed_errors=%ld\n",
1152         (long)pstats->rx_fifo_errors, (long)pstats->rx_missed_errors);
1153
1154   pr_debug(" tx_aborted_errors=%-7ld tx_carrier_errors=%ld\n",
1155         (long)pstats->tx_aborted_errors, (long)pstats->tx_carrier_errors);
1156   pr_debug(" tx_fifo_errors=%-7ld    tx_heartbeat_errors=%ld\n",
1157         (long)pstats->tx_fifo_errors, (long)pstats->tx_heartbeat_errors);
1158   pr_debug(" tx_window_errors=%ld\n",
1159         (long)pstats->tx_window_errors);
1160 } /* pr_linux_stats */
1161
1162 /* ----------------------------------------------------------------------------
1163 pr_mace_stats
1164 ---------------------------------------------------------------------------- */
1165 static void pr_mace_stats(mace_statistics *pstats)
1166 {
1167   pr_debug("pr_mace_stats\n");
1168
1169   pr_debug(" xmtsv=%-7d             uflo=%d\n",
1170         pstats->xmtsv, pstats->uflo);
1171   pr_debug(" lcol=%-7d              more=%d\n",
1172         pstats->lcol, pstats->more);
1173   pr_debug(" one=%-7d               defer=%d\n",
1174         pstats->one, pstats->defer);
1175   pr_debug(" lcar=%-7d              rtry=%d\n",
1176         pstats->lcar, pstats->rtry);
1177
1178   /* MACE_XMTRC */
1179   pr_debug(" exdef=%-7d             xmtrc=%d\n",
1180         pstats->exdef, pstats->xmtrc);
1181
1182   /* RFS1--Receive Status (RCVSTS) */
1183   pr_debug(" oflo=%-7d              clsn=%d\n",
1184         pstats->oflo, pstats->clsn);
1185   pr_debug(" fram=%-7d              fcs=%d\n",
1186         pstats->fram, pstats->fcs);
1187
1188   /* RFS2--Runt Packet Count (RNTPC) */
1189   /* RFS3--Receive Collision Count (RCVCC) */
1190   pr_debug(" rfs_rntpc=%-7d         rfs_rcvcc=%d\n",
1191         pstats->rfs_rntpc, pstats->rfs_rcvcc);
1192
1193   /* MACE_IR */
1194   pr_debug(" jab=%-7d               babl=%d\n",
1195         pstats->jab, pstats->babl);
1196   pr_debug(" cerr=%-7d              rcvcco=%d\n",
1197         pstats->cerr, pstats->rcvcco);
1198   pr_debug(" rntpco=%-7d            mpco=%d\n",
1199         pstats->rntpco, pstats->mpco);
1200
1201   /* MACE_MPC */
1202   pr_debug(" mpc=%d\n", pstats->mpc);
1203
1204   /* MACE_RNTPC */
1205   pr_debug(" rntpc=%d\n", pstats->rntpc);
1206
1207   /* MACE_RCVCC */
1208   pr_debug(" rcvcc=%d\n", pstats->rcvcc);
1209
1210 } /* pr_mace_stats */
1211
1212 /* ----------------------------------------------------------------------------
1213 update_stats
1214         Update statistics.  We change to register window 1, so this
1215         should be run single-threaded if the device is active. This is
1216         expected to be a rare operation, and it's simpler for the rest
1217         of the driver to assume that window 0 is always valid rather
1218         than use a special window-state variable.
1219
1220         oflo & uflo should _never_ occur since it would mean the Xilinx
1221         was not able to transfer data between the MACE FIFO and the
1222         card's SRAM fast enough.  If this happens, something is
1223         seriously wrong with the hardware.
1224 ---------------------------------------------------------------------------- */
1225 static void update_stats(unsigned int ioaddr, struct net_device *dev)
1226 {
1227   mace_private *lp = netdev_priv(dev);
1228
1229   lp->mace_stats.rcvcc += mace_read(lp, ioaddr, MACE_RCVCC);
1230   lp->mace_stats.rntpc += mace_read(lp, ioaddr, MACE_RNTPC);
1231   lp->mace_stats.mpc += mace_read(lp, ioaddr, MACE_MPC);
1232   /* At this point, mace_stats is fully updated for this call.
1233      We may now update the linux_stats. */
1234
1235   /* The MACE has no equivalent for linux_stats field which are commented
1236      out. */
1237
1238   /* lp->linux_stats.multicast; */
1239   lp->linux_stats.collisions = 
1240     lp->mace_stats.rcvcco * 256 + lp->mace_stats.rcvcc;
1241     /* Collision: The MACE may retry sending a packet 15 times
1242        before giving up.  The retry count is in XMTRC.
1243        Does each retry constitute a collision?
1244        If so, why doesn't the RCVCC record these collisions? */
1245
1246   /* detailed rx_errors: */
1247   lp->linux_stats.rx_length_errors = 
1248     lp->mace_stats.rntpco * 256 + lp->mace_stats.rntpc;
1249   /* lp->linux_stats.rx_over_errors */
1250   lp->linux_stats.rx_crc_errors = lp->mace_stats.fcs;
1251   lp->linux_stats.rx_frame_errors = lp->mace_stats.fram;
1252   lp->linux_stats.rx_fifo_errors = lp->mace_stats.oflo;
1253   lp->linux_stats.rx_missed_errors = 
1254     lp->mace_stats.mpco * 256 + lp->mace_stats.mpc;
1255
1256   /* detailed tx_errors */
1257   lp->linux_stats.tx_aborted_errors = lp->mace_stats.rtry;
1258   lp->linux_stats.tx_carrier_errors = lp->mace_stats.lcar;
1259     /* LCAR usually results from bad cabling. */
1260   lp->linux_stats.tx_fifo_errors = lp->mace_stats.uflo;
1261   lp->linux_stats.tx_heartbeat_errors = lp->mace_stats.cerr;
1262   /* lp->linux_stats.tx_window_errors; */
1263 } /* update_stats */
1264
1265 /* ----------------------------------------------------------------------------
1266 mace_get_stats
1267         Gathers ethernet statistics from the MACE chip.
1268 ---------------------------------------------------------------------------- */
1269 static struct net_device_stats *mace_get_stats(struct net_device *dev)
1270 {
1271   mace_private *lp = netdev_priv(dev);
1272
1273   update_stats(dev->base_addr, dev);
1274
1275   pr_debug("%s: updating the statistics.\n", dev->name);
1276   pr_linux_stats(&lp->linux_stats);
1277   pr_mace_stats(&lp->mace_stats);
1278
1279   return &lp->linux_stats;
1280 } /* net_device_stats */
1281
1282 /* ----------------------------------------------------------------------------
1283 updateCRC
1284         Modified from Am79C90 data sheet.
1285 ---------------------------------------------------------------------------- */
1286
1287 #ifdef BROKEN_MULTICAST
1288
1289 static void updateCRC(int *CRC, int bit)
1290 {
1291   static const int poly[]={
1292     1,1,1,0, 1,1,0,1,
1293     1,0,1,1, 1,0,0,0,
1294     1,0,0,0, 0,0,1,1,
1295     0,0,1,0, 0,0,0,0
1296   }; /* CRC polynomial.  poly[n] = coefficient of the x**n term of the
1297         CRC generator polynomial. */
1298
1299   int j;
1300
1301   /* shift CRC and control bit (CRC[32]) */
1302   for (j = 32; j > 0; j--)
1303     CRC[j] = CRC[j-1];
1304   CRC[0] = 0;
1305
1306   /* If bit XOR(control bit) = 1, set CRC = CRC XOR polynomial. */
1307   if (bit ^ CRC[32])
1308     for (j = 0; j < 32; j++)
1309       CRC[j] ^= poly[j];
1310 } /* updateCRC */
1311
1312 /* ----------------------------------------------------------------------------
1313 BuildLAF
1314         Build logical address filter.
1315         Modified from Am79C90 data sheet.
1316
1317 Input
1318         ladrf: logical address filter (contents initialized to 0)
1319         adr: ethernet address
1320 ---------------------------------------------------------------------------- */
1321 static void BuildLAF(int *ladrf, int *adr)
1322 {
1323   int CRC[33]={1}; /* CRC register, 1 word/bit + extra control bit */
1324
1325   int i, byte; /* temporary array indices */
1326   int hashcode; /* the output object */
1327
1328   CRC[32]=0;
1329
1330   for (byte = 0; byte < 6; byte++)
1331     for (i = 0; i < 8; i++)
1332       updateCRC(CRC, (adr[byte] >> i) & 1);
1333
1334   hashcode = 0;
1335   for (i = 0; i < 6; i++)
1336     hashcode = (hashcode << 1) + CRC[i];
1337
1338   byte = hashcode >> 3;
1339   ladrf[byte] |= (1 << (hashcode & 7));
1340
1341 #ifdef PCMCIA_DEBUG
1342   if (0)
1343     printk(KERN_DEBUG "    adr =%pM\n", adr);
1344   printk(KERN_DEBUG "    hashcode = %d(decimal), ladrf[0:63] =", hashcode);
1345   for (i = 0; i < 8; i++)
1346     pr_cont(" %02X", ladrf[i]);
1347   pr_cont("\n");
1348 #endif
1349 } /* BuildLAF */
1350
1351 /* ----------------------------------------------------------------------------
1352 restore_multicast_list
1353         Restores the multicast filter for MACE chip to the last
1354         set_multicast_list() call.
1355
1356 Input
1357         multicast_num_addrs
1358         multicast_ladrf[]
1359 ---------------------------------------------------------------------------- */
1360 static void restore_multicast_list(struct net_device *dev)
1361 {
1362   mace_private *lp = netdev_priv(dev);
1363   int num_addrs = lp->multicast_num_addrs;
1364   int *ladrf = lp->multicast_ladrf;
1365   unsigned int ioaddr = dev->base_addr;
1366   int i;
1367
1368   pr_debug("%s: restoring Rx mode to %d addresses.\n",
1369         dev->name, num_addrs);
1370
1371   if (num_addrs > 0) {
1372
1373     pr_debug("Attempt to restore multicast list detected.\n");
1374
1375     mace_write(lp, ioaddr, MACE_IAC, MACE_IAC_ADDRCHG | MACE_IAC_LOGADDR);
1376     /* Poll ADDRCHG bit */
1377     while (mace_read(lp, ioaddr, MACE_IAC) & MACE_IAC_ADDRCHG)
1378       ;
1379     /* Set LADRF register */
1380     for (i = 0; i < MACE_LADRF_LEN; i++)
1381       mace_write(lp, ioaddr, MACE_LADRF, ladrf[i]);
1382
1383     mace_write(lp, ioaddr, MACE_UTR, MACE_UTR_RCVFCSE | MACE_UTR_LOOP_EXTERNAL);
1384     mace_write(lp, ioaddr, MACE_MACCC, MACE_MACCC_ENXMT | MACE_MACCC_ENRCV);
1385
1386   } else if (num_addrs < 0) {
1387
1388     /* Promiscuous mode: receive all packets */
1389     mace_write(lp, ioaddr, MACE_UTR, MACE_UTR_LOOP_EXTERNAL);
1390     mace_write(lp, ioaddr, MACE_MACCC,
1391       MACE_MACCC_PROM | MACE_MACCC_ENXMT | MACE_MACCC_ENRCV
1392     );
1393
1394   } else {
1395
1396     /* Normal mode */
1397     mace_write(lp, ioaddr, MACE_UTR, MACE_UTR_LOOP_EXTERNAL);
1398     mace_write(lp, ioaddr, MACE_MACCC, MACE_MACCC_ENXMT | MACE_MACCC_ENRCV);
1399
1400   }
1401 } /* restore_multicast_list */
1402
1403 /* ----------------------------------------------------------------------------
1404 set_multicast_list
1405         Set or clear the multicast filter for this adaptor.
1406
1407 Input
1408         num_addrs == -1 Promiscuous mode, receive all packets
1409         num_addrs == 0  Normal mode, clear multicast list
1410         num_addrs > 0   Multicast mode, receive normal and MC packets, and do
1411                         best-effort filtering.
1412 Output
1413         multicast_num_addrs
1414         multicast_ladrf[]
1415 ---------------------------------------------------------------------------- */
1416
1417 static void set_multicast_list(struct net_device *dev)
1418 {
1419   mace_private *lp = netdev_priv(dev);
1420   int adr[ETH_ALEN] = {0}; /* Ethernet address */
1421   struct netdev_hw_addr *ha;
1422
1423 #ifdef PCMCIA_DEBUG
1424   {
1425     static int old;
1426     if (netdev_mc_count(dev) != old) {
1427       old = netdev_mc_count(dev);
1428       pr_debug("%s: setting Rx mode to %d addresses.\n",
1429             dev->name, old);
1430     }
1431   }
1432 #endif
1433
1434   /* Set multicast_num_addrs. */
1435   lp->multicast_num_addrs = netdev_mc_count(dev);
1436
1437   /* Set multicast_ladrf. */
1438   if (num_addrs > 0) {
1439     /* Calculate multicast logical address filter */
1440     memset(lp->multicast_ladrf, 0, MACE_LADRF_LEN);
1441     netdev_for_each_mc_addr(ha, dev) {
1442       memcpy(adr, ha->addr, ETH_ALEN);
1443       BuildLAF(lp->multicast_ladrf, adr);
1444     }
1445   }
1446
1447   restore_multicast_list(dev);
1448
1449 } /* set_multicast_list */
1450
1451 #endif /* BROKEN_MULTICAST */
1452
1453 static void restore_multicast_list(struct net_device *dev)
1454 {
1455   unsigned int ioaddr = dev->base_addr;
1456   mace_private *lp = netdev_priv(dev);
1457
1458   pr_debug("%s: restoring Rx mode to %d addresses.\n", dev->name,
1459         lp->multicast_num_addrs);
1460
1461   if (dev->flags & IFF_PROMISC) {
1462     /* Promiscuous mode: receive all packets */
1463     mace_write(lp,ioaddr, MACE_UTR, MACE_UTR_LOOP_EXTERNAL);
1464     mace_write(lp, ioaddr, MACE_MACCC,
1465       MACE_MACCC_PROM | MACE_MACCC_ENXMT | MACE_MACCC_ENRCV
1466     );
1467   } else {
1468     /* Normal mode */
1469     mace_write(lp, ioaddr, MACE_UTR, MACE_UTR_LOOP_EXTERNAL);
1470     mace_write(lp, ioaddr, MACE_MACCC, MACE_MACCC_ENXMT | MACE_MACCC_ENRCV);
1471   }
1472 } /* restore_multicast_list */
1473
1474 static void set_multicast_list(struct net_device *dev)
1475 {
1476   mace_private *lp = netdev_priv(dev);
1477
1478 #ifdef PCMCIA_DEBUG
1479   {
1480     static int old;
1481     if (netdev_mc_count(dev) != old) {
1482       old = netdev_mc_count(dev);
1483       pr_debug("%s: setting Rx mode to %d addresses.\n",
1484             dev->name, old);
1485     }
1486   }
1487 #endif
1488
1489   lp->multicast_num_addrs = netdev_mc_count(dev);
1490   restore_multicast_list(dev);
1491
1492 } /* set_multicast_list */
1493
1494 static const struct pcmcia_device_id nmclan_ids[] = {
1495         PCMCIA_DEVICE_PROD_ID12("New Media Corporation", "Ethernet", 0x085a850b, 0x00b2e941),
1496         PCMCIA_DEVICE_PROD_ID12("Portable Add-ons", "Ethernet+", 0xebf1d60, 0xad673aaf),
1497         PCMCIA_DEVICE_NULL,
1498 };
1499 MODULE_DEVICE_TABLE(pcmcia, nmclan_ids);
1500
1501 static struct pcmcia_driver nmclan_cs_driver = {
1502         .owner          = THIS_MODULE,
1503         .name           = "nmclan_cs",
1504         .probe          = nmclan_probe,
1505         .remove         = nmclan_detach,
1506         .id_table       = nmclan_ids,
1507         .suspend        = nmclan_suspend,
1508         .resume         = nmclan_resume,
1509 };
1510 module_pcmcia_driver(nmclan_cs_driver);