Linux-libre 3.11-gnu
[librecmc/linux-libre.git] / drivers / mtd / maps / gpio-addr-flash.c
1 /*
2  * drivers/mtd/maps/gpio-addr-flash.c
3  *
4  * Handle the case where a flash device is mostly addressed using physical
5  * line and supplemented by GPIOs.  This way you can hook up say a 8MiB flash
6  * to a 2MiB memory range and use the GPIOs to select a particular range.
7  *
8  * Copyright © 2000 Nicolas Pitre <nico@cam.org>
9  * Copyright © 2005-2009 Analog Devices Inc.
10  *
11  * Enter bugs at http://blackfin.uclinux.org/
12  *
13  * Licensed under the GPL-2 or later.
14  */
15
16 #include <linux/gpio.h>
17 #include <linux/init.h>
18 #include <linux/io.h>
19 #include <linux/kernel.h>
20 #include <linux/module.h>
21 #include <linux/mtd/mtd.h>
22 #include <linux/mtd/map.h>
23 #include <linux/mtd/partitions.h>
24 #include <linux/mtd/physmap.h>
25 #include <linux/platform_device.h>
26 #include <linux/slab.h>
27 #include <linux/types.h>
28
29 #define pr_devinit(fmt, args...) \
30         ({ static const char __fmt[] = fmt; printk(__fmt, ## args); })
31
32 #define DRIVER_NAME "gpio-addr-flash"
33 #define PFX DRIVER_NAME ": "
34
35 /**
36  * struct async_state - keep GPIO flash state
37  *      @mtd:         MTD state for this mapping
38  *      @map:         MTD map state for this flash
39  *      @gpio_count:  number of GPIOs used to address
40  *      @gpio_addrs:  array of GPIOs to twiddle
41  *      @gpio_values: cached GPIO values
42  *      @win_size:    dedicated memory size (if no GPIOs)
43  */
44 struct async_state {
45         struct mtd_info *mtd;
46         struct map_info map;
47         size_t gpio_count;
48         unsigned *gpio_addrs;
49         int *gpio_values;
50         unsigned long win_size;
51 };
52 #define gf_map_info_to_state(mi) ((struct async_state *)(mi)->map_priv_1)
53
54 /**
55  * gf_set_gpios() - set GPIO address lines to access specified flash offset
56  *      @state: GPIO flash state
57  *      @ofs:   desired offset to access
58  *
59  * Rather than call the GPIO framework every time, cache the last-programmed
60  * value.  This speeds up sequential accesses (which are by far the most common
61  * type).  We rely on the GPIO framework to treat non-zero value as high so
62  * that we don't have to normalize the bits.
63  */
64 static void gf_set_gpios(struct async_state *state, unsigned long ofs)
65 {
66         size_t i = 0;
67         int value;
68         ofs /= state->win_size;
69         do {
70                 value = ofs & (1 << i);
71                 if (state->gpio_values[i] != value) {
72                         gpio_set_value(state->gpio_addrs[i], value);
73                         state->gpio_values[i] = value;
74                 }
75         } while (++i < state->gpio_count);
76 }
77
78 /**
79  * gf_read() - read a word at the specified offset
80  *      @map: MTD map state
81  *      @ofs: desired offset to read
82  */
83 static map_word gf_read(struct map_info *map, unsigned long ofs)
84 {
85         struct async_state *state = gf_map_info_to_state(map);
86         uint16_t word;
87         map_word test;
88
89         gf_set_gpios(state, ofs);
90
91         word = readw(map->virt + (ofs % state->win_size));
92         test.x[0] = word;
93         return test;
94 }
95
96 /**
97  * gf_copy_from() - copy a chunk of data from the flash
98  *      @map:  MTD map state
99  *      @to:   memory to copy to
100  *      @from: flash offset to copy from
101  *      @len:  how much to copy
102  *
103  * We rely on the MTD layer to chunk up copies such that a single request here
104  * will not cross a window size.  This allows us to only wiggle the GPIOs once
105  * before falling back to a normal memcpy.  Reading the higher layer code shows
106  * that this is indeed the case, but add a BUG_ON() to future proof.
107  */
108 static void gf_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
109 {
110         struct async_state *state = gf_map_info_to_state(map);
111
112         gf_set_gpios(state, from);
113
114         /* BUG if operation crosses the win_size */
115         BUG_ON(!((from + len) % state->win_size <= (from + len)));
116
117         /* operation does not cross the win_size, so one shot it */
118         memcpy_fromio(to, map->virt + (from % state->win_size), len);
119 }
120
121 /**
122  * gf_write() - write a word at the specified offset
123  *      @map: MTD map state
124  *      @ofs: desired offset to write
125  */
126 static void gf_write(struct map_info *map, map_word d1, unsigned long ofs)
127 {
128         struct async_state *state = gf_map_info_to_state(map);
129         uint16_t d;
130
131         gf_set_gpios(state, ofs);
132
133         d = d1.x[0];
134         writew(d, map->virt + (ofs % state->win_size));
135 }
136
137 /**
138  * gf_copy_to() - copy a chunk of data to the flash
139  *      @map:  MTD map state
140  *      @to:   flash offset to copy to
141  *      @from: memory to copy from
142  *      @len:  how much to copy
143  *
144  * See gf_copy_from() caveat.
145  */
146 static void gf_copy_to(struct map_info *map, unsigned long to,
147                        const void *from, ssize_t len)
148 {
149         struct async_state *state = gf_map_info_to_state(map);
150
151         gf_set_gpios(state, to);
152
153         /* BUG if operation crosses the win_size */
154         BUG_ON(!((to + len) % state->win_size <= (to + len)));
155
156         /* operation does not cross the win_size, so one shot it */
157         memcpy_toio(map->virt + (to % state->win_size), from, len);
158 }
159
160 static const char * const part_probe_types[] = {
161         "cmdlinepart", "RedBoot", NULL };
162
163 /**
164  * gpio_flash_probe() - setup a mapping for a GPIO assisted flash
165  *      @pdev: platform device
166  *
167  * The platform resource layout expected looks something like:
168  * struct mtd_partition partitions[] = { ... };
169  * struct physmap_flash_data flash_data = { ... };
170  * unsigned flash_gpios[] = { GPIO_XX, GPIO_XX, ... };
171  * struct resource flash_resource[] = {
172  *      {
173  *              .name  = "cfi_probe",
174  *              .start = 0x20000000,
175  *              .end   = 0x201fffff,
176  *              .flags = IORESOURCE_MEM,
177  *      }, {
178  *              .start = (unsigned long)flash_gpios,
179  *              .end   = ARRAY_SIZE(flash_gpios),
180  *              .flags = IORESOURCE_IRQ,
181  *      }
182  * };
183  * struct platform_device flash_device = {
184  *      .name          = "gpio-addr-flash",
185  *      .dev           = { .platform_data = &flash_data, },
186  *      .num_resources = ARRAY_SIZE(flash_resource),
187  *      .resource      = flash_resource,
188  *      ...
189  * };
190  */
191 static int gpio_flash_probe(struct platform_device *pdev)
192 {
193         size_t i, arr_size;
194         struct physmap_flash_data *pdata;
195         struct resource *memory;
196         struct resource *gpios;
197         struct async_state *state;
198
199         pdata = pdev->dev.platform_data;
200         memory = platform_get_resource(pdev, IORESOURCE_MEM, 0);
201         gpios = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
202
203         if (!memory || !gpios || !gpios->end)
204                 return -EINVAL;
205
206         arr_size = sizeof(int) * gpios->end;
207         state = kzalloc(sizeof(*state) + arr_size, GFP_KERNEL);
208         if (!state)
209                 return -ENOMEM;
210
211         /*
212          * We cast start/end to known types in the boards file, so cast
213          * away their pointer types here to the known types (gpios->xxx).
214          */
215         state->gpio_count     = gpios->end;
216         state->gpio_addrs     = (void *)(unsigned long)gpios->start;
217         state->gpio_values    = (void *)(state + 1);
218         state->win_size       = resource_size(memory);
219         memset(state->gpio_values, 0xff, arr_size);
220
221         state->map.name       = DRIVER_NAME;
222         state->map.read       = gf_read;
223         state->map.copy_from  = gf_copy_from;
224         state->map.write      = gf_write;
225         state->map.copy_to    = gf_copy_to;
226         state->map.bankwidth  = pdata->width;
227         state->map.size       = state->win_size * (1 << state->gpio_count);
228         state->map.virt       = ioremap_nocache(memory->start, state->map.size);
229         state->map.phys       = NO_XIP;
230         state->map.map_priv_1 = (unsigned long)state;
231
232         platform_set_drvdata(pdev, state);
233
234         i = 0;
235         do {
236                 if (gpio_request(state->gpio_addrs[i], DRIVER_NAME)) {
237                         pr_devinit(KERN_ERR PFX "failed to request gpio %d\n",
238                                 state->gpio_addrs[i]);
239                         while (i--)
240                                 gpio_free(state->gpio_addrs[i]);
241                         kfree(state);
242                         return -EBUSY;
243                 }
244                 gpio_direction_output(state->gpio_addrs[i], 0);
245         } while (++i < state->gpio_count);
246
247         pr_devinit(KERN_NOTICE PFX "probing %d-bit flash bus\n",
248                 state->map.bankwidth * 8);
249         state->mtd = do_map_probe(memory->name, &state->map);
250         if (!state->mtd) {
251                 for (i = 0; i < state->gpio_count; ++i)
252                         gpio_free(state->gpio_addrs[i]);
253                 kfree(state);
254                 return -ENXIO;
255         }
256
257
258         mtd_device_parse_register(state->mtd, part_probe_types, NULL,
259                                   pdata->parts, pdata->nr_parts);
260
261         return 0;
262 }
263
264 static int gpio_flash_remove(struct platform_device *pdev)
265 {
266         struct async_state *state = platform_get_drvdata(pdev);
267         size_t i = 0;
268         do {
269                 gpio_free(state->gpio_addrs[i]);
270         } while (++i < state->gpio_count);
271         mtd_device_unregister(state->mtd);
272         map_destroy(state->mtd);
273         kfree(state);
274         return 0;
275 }
276
277 static struct platform_driver gpio_flash_driver = {
278         .probe          = gpio_flash_probe,
279         .remove         = gpio_flash_remove,
280         .driver         = {
281                 .name   = DRIVER_NAME,
282         },
283 };
284
285 module_platform_driver(gpio_flash_driver);
286
287 MODULE_AUTHOR("Mike Frysinger <vapier@gentoo.org>");
288 MODULE_DESCRIPTION("MTD map driver for flashes addressed physically and with gpios");
289 MODULE_LICENSE("GPL");