drivers/media/platform/davinci/vpbe.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Copyright (C) 2010 Texas Instruments Inc
   4  */
   5 #include <linux/kernel.h>
   6 #include <linux/init.h>
   7 #include <linux/module.h>
   8 #include <linux/errno.h>
   9 #include <linux/fs.h>
  10 #include <linux/string.h>
  11 #include <linux/wait.h>
  12 #include <linux/time.h>
  13 #include <linux/platform_device.h>
  14 #include <linux/io.h>
  15 #include <linux/slab.h>
  16 #include <linux/clk.h>
  17 #include <linux/err.h>
  18
  19 #include <media/v4l2-device.h>
  20 #include <media/davinci/vpbe_types.h>
  21 #include <media/davinci/vpbe.h>
  22 #include <media/davinci/vpss.h>
  23 #include <media/davinci/vpbe_venc.h>
  24
  25 #define VPBE_DEFAULT_OUTPUT     "Composite"
  26 #define VPBE_DEFAULT_MODE       "ntsc"
  27
  28 static char *def_output = VPBE_DEFAULT_OUTPUT;
  29 static char *def_mode = VPBE_DEFAULT_MODE;
  30 static int debug;
  31
  32 module_param(def_output, charp, S_IRUGO);
  33 module_param(def_mode, charp, S_IRUGO);
  34 module_param(debug, int, 0644);
  35
  36 MODULE_PARM_DESC(def_output, "vpbe output name (default:Composite)");
  37 MODULE_PARM_DESC(def_mode, "vpbe output mode name (default:ntsc");
  38 MODULE_PARM_DESC(debug, "Debug level 0-1");
  39
  40 MODULE_DESCRIPTION("TI DMXXX VPBE Display controller");
  41 MODULE_LICENSE("GPL");
  42 MODULE_AUTHOR("Texas Instruments");
  43
  44 /**
  45  * vpbe_current_encoder_info - Get config info for current encoder
  46  * @vpbe_dev: vpbe device ptr
  47  *
  48  * Return ptr to current encoder config info
  49  */
  50 static struct encoder_config_info*
  51 vpbe_current_encoder_info(struct vpbe_device *vpbe_dev)
  52 {
  53         struct vpbe_config *cfg = vpbe_dev->cfg;
  54         int index = vpbe_dev->current_sd_index;
  55
  56         return ((index == 0) ? &cfg->venc :
  57                                 &cfg->ext_encoders[index-1]);
  58 }
  59
  60 /**
  61  * vpbe_find_encoder_sd_index - Given a name find encoder sd index
  62  *
  63  * @cfg: ptr to vpbe cfg
  64  * @index: index used by application
  65  *
  66  * Return sd index of the encoder
  67  */
  68 static int vpbe_find_encoder_sd_index(struct vpbe_config *cfg,
  69                              int index)
  70 {
  71         char *encoder_name = cfg->outputs[index].subdev_name;
  72         int i;
  73
  74         /* Venc is always first */
  75         if (!strcmp(encoder_name, cfg->venc.module_name))
  76                 return 0;
  77
  78         for (i = 0; i < cfg->num_ext_encoders; i++) {
  79                 if (!strcmp(encoder_name,
  80                      cfg->ext_encoders[i].module_name))
  81                         return i+1;
  82         }
  83
  84         return -EINVAL;
  85 }
  86
  87 /**
  88  * vpbe_enum_outputs - enumerate outputs
  89  * @vpbe_dev: vpbe device ptr
  90  * @output: ptr to v4l2_output structure
  91  *
  92  * Enumerates the outputs available at the vpbe display
  93  * returns the status, -EINVAL if end of output list
  94  */
  95 static int vpbe_enum_outputs(struct vpbe_device *vpbe_dev,
  96                              struct v4l2_output *output)
  97 {
  98         struct vpbe_config *cfg = vpbe_dev->cfg;
  99         unsigned int temp_index = output->index;
 100
 101         if (temp_index >= cfg->num_outputs)
 102                 return -EINVAL;
 103
 104         *output = cfg->outputs[temp_index].output;
 105         output->index = temp_index;
 106
 107         return 0;
 108 }
 109
 110 static int vpbe_get_mode_info(struct vpbe_device *vpbe_dev, char *mode,
 111                               int output_index)
 112 {
 113         struct vpbe_config *cfg = vpbe_dev->cfg;
 114         struct vpbe_enc_mode_info var;
 115         int curr_output = output_index;
 116         int i;
 117
 118         if (!mode)
 119                 return -EINVAL;
 120
 121         for (i = 0; i < cfg->outputs[curr_output].num_modes; i++) {
 122                 var = cfg->outputs[curr_output].modes[i];
 123                 if (!strcmp(mode, var.name)) {
 124                         vpbe_dev->current_timings = var;
 125                         return 0;
 126                 }
 127         }
 128
 129         return -EINVAL;
 130 }
 131
 132 static int vpbe_get_current_mode_info(struct vpbe_device *vpbe_dev,
 133                                       struct vpbe_enc_mode_info *mode_info)
 134 {
 135         if (!mode_info)
 136                 return -EINVAL;
 137
 138         *mode_info = vpbe_dev->current_timings;
 139
 140         return 0;
 141 }
 142
 143 /* Get std by std id */
 144 static int vpbe_get_std_info(struct vpbe_device *vpbe_dev,
 145                              v4l2_std_id std_id)
 146 {
 147         struct vpbe_config *cfg = vpbe_dev->cfg;
 148         struct vpbe_enc_mode_info var;
 149         int curr_output = vpbe_dev->current_out_index;
 150         int i;
 151
 152         for (i = 0; i < vpbe_dev->cfg->outputs[curr_output].num_modes; i++) {
 153                 var = cfg->outputs[curr_output].modes[i];
 154                 if ((var.timings_type & VPBE_ENC_STD) &&
 155                   (var.std_id & std_id)) {
 156                         vpbe_dev->current_timings = var;
 157                         return 0;
 158                 }
 159         }
 160
 161         return -EINVAL;
 162 }
 163
 164 static int vpbe_get_std_info_by_name(struct vpbe_device *vpbe_dev,
 165                                 char *std_name)
 166 {
 167         struct vpbe_config *cfg = vpbe_dev->cfg;
 168         struct vpbe_enc_mode_info var;
 169         int curr_output = vpbe_dev->current_out_index;
 170         int i;
 171
 172         for (i = 0; i < vpbe_dev->cfg->outputs[curr_output].num_modes; i++) {
 173                 var = cfg->outputs[curr_output].modes[i];
 174                 if (!strcmp(var.name, std_name)) {
 175                         vpbe_dev->current_timings = var;
 176                         return 0;
 177                 }
 178         }
 179
 180         return -EINVAL;
 181 }
 182
 183 /**
 184  * vpbe_set_output - Set output
 185  * @vpbe_dev: vpbe device ptr
 186  * @index: index of output
 187  *
 188  * Set vpbe output to the output specified by the index
 189  */
 190 static int vpbe_set_output(struct vpbe_device *vpbe_dev, int index)
 191 {
 192         struct encoder_config_info *curr_enc_info =
 193                         vpbe_current_encoder_info(vpbe_dev);
 194         struct vpbe_config *cfg = vpbe_dev->cfg;
 195         struct venc_platform_data *venc_device = vpbe_dev->venc_device;
 196         int enc_out_index;
 197         int sd_index;
 198         int ret;
 199
 200         if (index >= cfg->num_outputs)
 201                 return -EINVAL;
 202
 203         mutex_lock(&vpbe_dev->lock);
 204
 205         sd_index = vpbe_dev->current_sd_index;
 206         enc_out_index = cfg->outputs[index].output.index;
 207         /*
 208          * Currently we switch the encoder based on output selected
 209          * by the application. If media controller is implemented later
 210          * there is will be an API added to setup_link between venc
 211          * and external encoder. So in that case below comparison always
 212          * match and encoder will not be switched. But if application
 213          * chose not to use media controller, then this provides current
 214          * way of switching encoder at the venc output.
 215          */
 216         if (strcmp(curr_enc_info->module_name,
 217                    cfg->outputs[index].subdev_name)) {
 218                 /* Need to switch the encoder at the output */
 219                 sd_index = vpbe_find_encoder_sd_index(cfg, index);
 220                 if (sd_index < 0) {
 221                         ret = -EINVAL;
 222                         goto unlock;
 223                 }
 224
 225                 ret = venc_device->setup_if_config(cfg->outputs[index].if_params);
 226                 if (ret)
 227                         goto unlock;
 228         }
 229
 230         /* Set output at the encoder */
 231         ret = v4l2_subdev_call(vpbe_dev->encoders[sd_index], video,
 232                                        s_routing, 0, enc_out_index, 0);
 233         if (ret)
 234                 goto unlock;
 235
 236         /*
 237          * It is assumed that venc or external encoder will set a default
 238          * mode in the sub device. For external encoder or LCD pannel output,
 239          * we also need to set up the lcd port for the required mode. So setup
 240          * the lcd port for the default mode that is configured in the board
 241          * arch/arm/mach-davinci/board-dm355-evm.setup file for the external
 242          * encoder.
 243          */
 244         ret = vpbe_get_mode_info(vpbe_dev,
 245                                  cfg->outputs[index].default_mode, index);
 246         if (!ret) {
 247                 struct osd_state *osd_device = vpbe_dev->osd_device;
 248
 249                 osd_device->ops.set_left_margin(osd_device,
 250                         vpbe_dev->current_timings.left_margin);
 251                 osd_device->ops.set_top_margin(osd_device,
 252                 vpbe_dev->current_timings.upper_margin);
 253                 vpbe_dev->current_sd_index = sd_index;
 254                 vpbe_dev->current_out_index = index;
 255         }
 256 unlock:
 257         mutex_unlock(&vpbe_dev->lock);
 258         return ret;
 259 }
 260
 261 static int vpbe_set_default_output(struct vpbe_device *vpbe_dev)
 262 {
 263         struct vpbe_config *cfg = vpbe_dev->cfg;
 264         int i;
 265
 266         for (i = 0; i < cfg->num_outputs; i++) {
 267                 if (!strcmp(def_output,
 268                             cfg->outputs[i].output.name)) {
 269                         int ret = vpbe_set_output(vpbe_dev, i);
 270
 271                         if (!ret)
 272                                 vpbe_dev->current_out_index = i;
 273                         return ret;
 274                 }
 275         }
 276         return 0;
 277 }
 278
 279 /**
 280  * vpbe_get_output - Get output
 281  * @vpbe_dev: vpbe device ptr
 282  *
 283  * return current vpbe output to the the index
 284  */
 285 static unsigned int vpbe_get_output(struct vpbe_device *vpbe_dev)
 286 {
 287         return vpbe_dev->current_out_index;
 288 }
 289
 290 /*
 291  * vpbe_s_dv_timings - Set the given preset timings in the encoder
 292  *
 293  * Sets the timings if supported by the current encoder. Return the status.
 294  * 0 - success & -EINVAL on error
 295  */
 296 static int vpbe_s_dv_timings(struct vpbe_device *vpbe_dev,
 297                     struct v4l2_dv_timings *dv_timings)
 298 {
 299         struct vpbe_config *cfg = vpbe_dev->cfg;
 300         int out_index = vpbe_dev->current_out_index;
 301         struct vpbe_output *output = &cfg->outputs[out_index];
 302         int sd_index = vpbe_dev->current_sd_index;
 303         int ret, i;
 304
 305
 306         if (!(cfg->outputs[out_index].output.capabilities &
 307             V4L2_OUT_CAP_DV_TIMINGS))
 308                 return -ENODATA;
 309
 310         for (i = 0; i < output->num_modes; i++) {
 311                 if (output->modes[i].timings_type == VPBE_ENC_DV_TIMINGS &&
 312                     !memcmp(&output->modes[i].dv_timings,
 313                                 dv_timings, sizeof(*dv_timings)))
 314                         break;
 315         }
 316         if (i >= output->num_modes)
 317                 return -EINVAL;
 318         vpbe_dev->current_timings = output->modes[i];
 319         mutex_lock(&vpbe_dev->lock);
 320
 321         ret = v4l2_subdev_call(vpbe_dev->encoders[sd_index], video,
 322                                         s_dv_timings, dv_timings);
 323         if (!ret && vpbe_dev->amp) {
 324                 /* Call amplifier subdevice */
 325                 ret = v4l2_subdev_call(vpbe_dev->amp, video,
 326                                 s_dv_timings, dv_timings);
 327         }
 328         /* set the lcd controller output for the given mode */
 329         if (!ret) {
 330                 struct osd_state *osd_device = vpbe_dev->osd_device;
 331
 332                 osd_device->ops.set_left_margin(osd_device,
 333                 vpbe_dev->current_timings.left_margin);
 334                 osd_device->ops.set_top_margin(osd_device,
 335                 vpbe_dev->current_timings.upper_margin);
 336         }
 337         mutex_unlock(&vpbe_dev->lock);
 338
 339         return ret;
 340 }
 341
 342 /*
 343  * vpbe_g_dv_timings - Get the timings in the current encoder
 344  *
 345  * Get the timings in the current encoder. Return the status. 0 - success
 346  * -EINVAL on error
 347  */
 348 static int vpbe_g_dv_timings(struct vpbe_device *vpbe_dev,
 349                      struct v4l2_dv_timings *dv_timings)
 350 {
 351         struct vpbe_config *cfg = vpbe_dev->cfg;
 352         int out_index = vpbe_dev->current_out_index;
 353
 354         if (!(cfg->outputs[out_index].output.capabilities &
 355                 V4L2_OUT_CAP_DV_TIMINGS))
 356                 return -ENODATA;
 357
 358         if (vpbe_dev->current_timings.timings_type &
 359           VPBE_ENC_DV_TIMINGS) {
 360                 *dv_timings = vpbe_dev->current_timings.dv_timings;
 361                 return 0;
 362         }
 363
 364         return -EINVAL;
 365 }
 366
 367 /*
 368  * vpbe_enum_dv_timings - Enumerate the dv timings in the current encoder
 369  *
 370  * Get the timings in the current encoder. Return the status. 0 - success
 371  * -EINVAL on error
 372  */
 373 static int vpbe_enum_dv_timings(struct vpbe_device *vpbe_dev,
 374                          struct v4l2_enum_dv_timings *timings)
 375 {
 376         struct vpbe_config *cfg = vpbe_dev->cfg;
 377         int out_index = vpbe_dev->current_out_index;
 378         struct vpbe_output *output = &cfg->outputs[out_index];
 379         int j = 0;
 380         int i;
 381
 382         if (!(output->output.capabilities & V4L2_OUT_CAP_DV_TIMINGS))
 383                 return -ENODATA;
 384
 385         for (i = 0; i < output->num_modes; i++) {
 386                 if (output->modes[i].timings_type == VPBE_ENC_DV_TIMINGS) {
 387                         if (j == timings->index)
 388                                 break;
 389                         j++;
 390                 }
 391         }
 392
 393         if (i == output->num_modes)
 394                 return -EINVAL;
 395         timings->timings = output->modes[i].dv_timings;
 396         return 0;
 397 }
 398
 399 /*
 400  * vpbe_s_std - Set the given standard in the encoder
 401  *
 402  * Sets the standard if supported by the current encoder. Return the status.
 403  * 0 - success & -EINVAL on error
 404  */
 405 static int vpbe_s_std(struct vpbe_device *vpbe_dev, v4l2_std_id std_id)
 406 {
 407         struct vpbe_config *cfg = vpbe_dev->cfg;
 408         int out_index = vpbe_dev->current_out_index;
 409         int sd_index = vpbe_dev->current_sd_index;
 410         int ret;
 411
 412         if (!(cfg->outputs[out_index].output.capabilities &
 413                 V4L2_OUT_CAP_STD))
 414                 return -ENODATA;
 415
 416         ret = vpbe_get_std_info(vpbe_dev, std_id);
 417         if (ret)
 418                 return ret;
 419
 420         mutex_lock(&vpbe_dev->lock);
 421
 422         ret = v4l2_subdev_call(vpbe_dev->encoders[sd_index], video,
 423                                s_std_output, std_id);
 424         /* set the lcd controller output for the given mode */
 425         if (!ret) {
 426                 struct osd_state *osd_device = vpbe_dev->osd_device;
 427
 428                 osd_device->ops.set_left_margin(osd_device,
 429                 vpbe_dev->current_timings.left_margin);
 430                 osd_device->ops.set_top_margin(osd_device,
 431                 vpbe_dev->current_timings.upper_margin);
 432         }
 433         mutex_unlock(&vpbe_dev->lock);
 434
 435         return ret;
 436 }
 437
 438 /*
 439  * vpbe_g_std - Get the standard in the current encoder
 440  *
 441  * Get the standard in the current encoder. Return the status. 0 - success
 442  * -EINVAL on error
 443  */
 444 static int vpbe_g_std(struct vpbe_device *vpbe_dev, v4l2_std_id *std_id)
 445 {
 446         struct vpbe_enc_mode_info *cur_timings = &vpbe_dev->current_timings;
 447         struct vpbe_config *cfg = vpbe_dev->cfg;
 448         int out_index = vpbe_dev->current_out_index;
 449
 450         if (!(cfg->outputs[out_index].output.capabilities & V4L2_OUT_CAP_STD))
 451                 return -ENODATA;
 452
 453         if (cur_timings->timings_type & VPBE_ENC_STD) {
 454                 *std_id = cur_timings->std_id;
 455                 return 0;
 456         }
 457
 458         return -EINVAL;
 459 }
 460
 461 /*
 462  * vpbe_set_mode - Set mode in the current encoder using mode info
 463  *
 464  * Use the mode string to decide what timings to set in the encoder
 465  * This is typically useful when fbset command is used to change the current
 466  * timings by specifying a string to indicate the timings.
 467  */
 468 static int vpbe_set_mode(struct vpbe_device *vpbe_dev,
 469                          struct vpbe_enc_mode_info *mode_info)
 470 {
 471         struct vpbe_enc_mode_info *preset_mode = NULL;
 472         struct vpbe_config *cfg = vpbe_dev->cfg;
 473         struct v4l2_dv_timings dv_timings;
 474         struct osd_state *osd_device;
 475         int out_index = vpbe_dev->current_out_index;
 476         int i;
 477
 478         if (!mode_info || !mode_info->name)
 479                 return -EINVAL;
 480
 481         for (i = 0; i < cfg->outputs[out_index].num_modes; i++) {
 482                 if (!strcmp(mode_info->name,
 483                      cfg->outputs[out_index].modes[i].name)) {
 484                         preset_mode = &cfg->outputs[out_index].modes[i];
 485                         /*
 486                          * it may be one of the 3 timings type. Check and
 487                          * invoke right API
 488                          */
 489                         if (preset_mode->timings_type & VPBE_ENC_STD)
 490                                 return vpbe_s_std(vpbe_dev,
 491                                                  preset_mode->std_id);
 492                         if (preset_mode->timings_type &
 493                                                 VPBE_ENC_DV_TIMINGS) {
 494                                 dv_timings =
 495                                         preset_mode->dv_timings;
 496                                 return vpbe_s_dv_timings(vpbe_dev, &dv_timings);
 497                         }
 498                 }
 499         }
 500
 501         /* Only custom timing should reach here */
 502         if (!preset_mode)
 503                 return -EINVAL;
 504
 505         mutex_lock(&vpbe_dev->lock);
 506
 507         osd_device = vpbe_dev->osd_device;
 508         vpbe_dev->current_timings = *preset_mode;
 509         osd_device->ops.set_left_margin(osd_device,
 510                 vpbe_dev->current_timings.left_margin);
 511         osd_device->ops.set_top_margin(osd_device,
 512                 vpbe_dev->current_timings.upper_margin);
 513
 514         mutex_unlock(&vpbe_dev->lock);
 515         return 0;
 516 }
 517
 518 static int vpbe_set_default_mode(struct vpbe_device *vpbe_dev)
 519 {
 520         int ret;
 521
 522         ret = vpbe_get_std_info_by_name(vpbe_dev, def_mode);
 523         if (ret)
 524                 return ret;
 525
 526         /* set the default mode in the encoder */
 527         return vpbe_set_mode(vpbe_dev, &vpbe_dev->current_timings);
 528 }
 529
 530 static int platform_device_get(struct device *dev, void *data)
 531 {
 532         struct platform_device *pdev = to_platform_device(dev);
 533         struct vpbe_device *vpbe_dev = data;
 534
 535         if (strstr(pdev->name, "vpbe-osd"))
 536                 vpbe_dev->osd_device = platform_get_drvdata(pdev);
 537         if (strstr(pdev->name, "vpbe-venc"))
 538                 vpbe_dev->venc_device = dev_get_platdata(&pdev->dev);
 539
 540         return 0;
 541 }
 542
 543 /**
 544  * vpbe_initialize() - Initialize the vpbe display controller
 545  * @dev: Master and slave device ptr
 546  * @vpbe_dev: vpbe device ptr
 547  *
 548  * Master frame buffer device drivers calls this to initialize vpbe
 549  * display controller. This will then registers v4l2 device and the sub
 550  * devices and sets a current encoder sub device for display. v4l2 display
 551  * device driver is the master and frame buffer display device driver is
 552  * the slave. Frame buffer display driver checks the initialized during
 553  * probe and exit if not initialized. Returns status.
 554  */
 555 static int vpbe_initialize(struct device *dev, struct vpbe_device *vpbe_dev)
 556 {
 557         struct encoder_config_info *enc_info;
 558         struct amp_config_info *amp_info;
 559         struct v4l2_subdev **enc_subdev;
 560         struct osd_state *osd_device;
 561         struct i2c_adapter *i2c_adap;
 562         int num_encoders;
 563         int ret = 0;
 564         int err;
 565         int i;
 566
 567         /*
 568          * v4l2 abd FBDev frame buffer devices will get the vpbe_dev pointer
 569          * from the platform device by iteration of platform drivers and
 570          * matching with device name
 571          */
 572         if (!vpbe_dev || !dev) {
 573                 printk(KERN_ERR "Null device pointers.\n");
 574                 return -ENODEV;
 575         }
 576
 577         if (vpbe_dev->initialized)
 578                 return 0;
 579
 580         mutex_lock(&vpbe_dev->lock);
 581
 582         if (strcmp(vpbe_dev->cfg->module_name, "dm644x-vpbe-display") != 0) {
 583                 /* We have dac clock available for platform */
 584                 vpbe_dev->dac_clk = clk_get(vpbe_dev->pdev, "vpss_dac");
 585                 if (IS_ERR(vpbe_dev->dac_clk)) {
 586                         ret =  PTR_ERR(vpbe_dev->dac_clk);
 587                         goto fail_mutex_unlock;
 588                 }
 589                 if (clk_prepare_enable(vpbe_dev->dac_clk)) {
 590                         ret =  -ENODEV;
 591                         clk_put(vpbe_dev->dac_clk);
 592                         goto fail_mutex_unlock;
 593                 }
 594         }
 595
 596         /* first enable vpss clocks */
 597         vpss_enable_clock(VPSS_VPBE_CLOCK, 1);
 598
 599         /* First register a v4l2 device */
 600         ret = v4l2_device_register(dev, &vpbe_dev->v4l2_dev);
 601         if (ret) {
 602                 v4l2_err(dev->driver,
 603                         "Unable to register v4l2 device.\n");
 604                 goto fail_clk_put;
 605         }
 606         v4l2_info(&vpbe_dev->v4l2_dev, "vpbe v4l2 device registered\n");
 607
 608         err = bus_for_each_dev(&platform_bus_type, NULL, vpbe_dev,
 609                                platform_device_get);
 610         if (err < 0) {
 611                 ret = err;
 612                 goto fail_dev_unregister;
 613         }
 614
 615         vpbe_dev->venc = venc_sub_dev_init(&vpbe_dev->v4l2_dev,
 616                                            vpbe_dev->cfg->venc.module_name);
 617         /* register venc sub device */
 618         if (!vpbe_dev->venc) {
 619                 v4l2_err(&vpbe_dev->v4l2_dev,
 620                         "vpbe unable to init venc sub device\n");
 621                 ret = -ENODEV;
 622                 goto fail_dev_unregister;
 623         }
 624         /* initialize osd device */
 625         osd_device = vpbe_dev->osd_device;
 626         if (osd_device->ops.initialize) {
 627                 err = osd_device->ops.initialize(osd_device);
 628                 if (err) {
 629                         v4l2_err(&vpbe_dev->v4l2_dev,
 630                                  "unable to initialize the OSD device");
 631                         err = -ENOMEM;
 632                         goto fail_dev_unregister;
 633                 }
 634         }
 635
 636         /*
 637          * Register any external encoders that are configured. At index 0 we
 638          * store venc sd index.
 639          */
 640         num_encoders = vpbe_dev->cfg->num_ext_encoders + 1;
 641         vpbe_dev->encoders = kmalloc_array(num_encoders,
 642                                            sizeof(*vpbe_dev->encoders),
 643                                            GFP_KERNEL);
 644         if (!vpbe_dev->encoders) {
 645                 ret = -ENOMEM;
 646                 goto fail_dev_unregister;
 647         }
 648
 649         i2c_adap = i2c_get_adapter(vpbe_dev->cfg->i2c_adapter_id);
 650         for (i = 0; i < (vpbe_dev->cfg->num_ext_encoders + 1); i++) {
 651                 if (i == 0) {
 652                         /* venc is at index 0 */
 653                         enc_subdev = &vpbe_dev->encoders[i];
 654                         *enc_subdev = vpbe_dev->venc;
 655                         continue;
 656                 }
 657                 enc_info = &vpbe_dev->cfg->ext_encoders[i];
 658                 if (enc_info->is_i2c) {
 659                         enc_subdev = &vpbe_dev->encoders[i];
 660                         *enc_subdev = v4l2_i2c_new_subdev_board(
 661                                                 &vpbe_dev->v4l2_dev, i2c_adap,
 662                                                 &enc_info->board_info, NULL);
 663                         if (*enc_subdev)
 664                                 v4l2_info(&vpbe_dev->v4l2_dev,
 665                                           "v4l2 sub device %s registered\n",
 666                                           enc_info->module_name);
 667                         else {
 668                                 v4l2_err(&vpbe_dev->v4l2_dev, "encoder %s failed to register",
 669                                          enc_info->module_name);
 670                                 ret = -ENODEV;
 671                                 goto fail_kfree_encoders;
 672                         }
 673                 } else
 674                         v4l2_warn(&vpbe_dev->v4l2_dev, "non-i2c encoders currently not supported");
 675         }
 676         /* Add amplifier subdevice for dm365 */
 677         if ((strcmp(vpbe_dev->cfg->module_name, "dm365-vpbe-display") == 0) &&
 678            vpbe_dev->cfg->amp) {
 679                 amp_info = vpbe_dev->cfg->amp;
 680                 if (amp_info->is_i2c) {
 681                         vpbe_dev->amp = v4l2_i2c_new_subdev_board(
 682                         &vpbe_dev->v4l2_dev, i2c_adap,
 683                         &amp_info->board_info, NULL);
 684                         if (!vpbe_dev->amp) {
 685                                 v4l2_err(&vpbe_dev->v4l2_dev,
 686                                          "amplifier %s failed to register",
 687                                          amp_info->module_name);
 688                                 ret = -ENODEV;
 689                                 goto fail_kfree_encoders;
 690                         }
 691                         v4l2_info(&vpbe_dev->v4l2_dev,
 692                                           "v4l2 sub device %s registered\n",
 693                                           amp_info->module_name);
 694                 } else {
 695                             vpbe_dev->amp = NULL;
 696                             v4l2_warn(&vpbe_dev->v4l2_dev, "non-i2c amplifiers currently not supported");
 697                 }
 698         } else {
 699             vpbe_dev->amp = NULL;
 700         }
 701
 702         /* set the current encoder and output to that of venc by default */
 703         vpbe_dev->current_sd_index = 0;
 704         vpbe_dev->current_out_index = 0;
 705
 706         mutex_unlock(&vpbe_dev->lock);
 707
 708         printk(KERN_NOTICE "Setting default output to %s\n", def_output);
 709         ret = vpbe_set_default_output(vpbe_dev);
 710         if (ret) {
 711                 v4l2_err(&vpbe_dev->v4l2_dev, "Failed to set default output %s",
 712                          def_output);
 713                 goto fail_kfree_amp;
 714         }
 715
 716         printk(KERN_NOTICE "Setting default mode to %s\n", def_mode);
 717         ret = vpbe_set_default_mode(vpbe_dev);
 718         if (ret) {
 719                 v4l2_err(&vpbe_dev->v4l2_dev, "Failed to set default mode %s",
 720                          def_mode);
 721                 goto fail_kfree_amp;
 722         }
 723         vpbe_dev->initialized = 1;
 724         /* TBD handling of bootargs for default output and mode */
 725         return 0;
 726
 727 fail_kfree_amp:
 728         mutex_lock(&vpbe_dev->lock);
 729         kfree(vpbe_dev->amp);
 730 fail_kfree_encoders:
 731         kfree(vpbe_dev->encoders);
 732 fail_dev_unregister:
 733         v4l2_device_unregister(&vpbe_dev->v4l2_dev);
 734 fail_clk_put:
 735         if (strcmp(vpbe_dev->cfg->module_name, "dm644x-vpbe-display") != 0) {
 736                 clk_disable_unprepare(vpbe_dev->dac_clk);
 737                 clk_put(vpbe_dev->dac_clk);
 738         }
 739 fail_mutex_unlock:
 740         mutex_unlock(&vpbe_dev->lock);
 741         return ret;
 742 }
 743
 744 /**
 745  * vpbe_deinitialize() - de-initialize the vpbe display controller
 746  * @dev: Master and slave device ptr
 747  * @vpbe_dev: vpbe device ptr
 748  *
 749  * vpbe_master and slave frame buffer devices calls this to de-initialize
 750  * the display controller. It is called when master and slave device
 751  * driver modules are removed and no longer requires the display controller.
 752  */
 753 static void vpbe_deinitialize(struct device *dev, struct vpbe_device *vpbe_dev)
 754 {
 755         v4l2_device_unregister(&vpbe_dev->v4l2_dev);
 756         if (strcmp(vpbe_dev->cfg->module_name, "dm644x-vpbe-display") != 0) {
 757                 clk_disable_unprepare(vpbe_dev->dac_clk);
 758                 clk_put(vpbe_dev->dac_clk);
 759         }
 760
 761         kfree(vpbe_dev->amp);
 762         kfree(vpbe_dev->encoders);
 763         vpbe_dev->initialized = 0;
 764         /* disable vpss clocks */
 765         vpss_enable_clock(VPSS_VPBE_CLOCK, 0);
 766 }
 767
 768 static const struct vpbe_device_ops vpbe_dev_ops = {
 769         .enum_outputs = vpbe_enum_outputs,
 770         .set_output = vpbe_set_output,
 771         .get_output = vpbe_get_output,
 772         .s_dv_timings = vpbe_s_dv_timings,
 773         .g_dv_timings = vpbe_g_dv_timings,
 774         .enum_dv_timings = vpbe_enum_dv_timings,
 775         .s_std = vpbe_s_std,
 776         .g_std = vpbe_g_std,
 777         .initialize = vpbe_initialize,
 778         .deinitialize = vpbe_deinitialize,
 779         .get_mode_info = vpbe_get_current_mode_info,
 780         .set_mode = vpbe_set_mode,
 781 };
 782
 783 static int vpbe_probe(struct platform_device *pdev)
 784 {
 785         struct vpbe_device *vpbe_dev;
 786         struct vpbe_config *cfg;
 787
 788         if (!pdev->dev.platform_data) {
 789                 v4l2_err(pdev->dev.driver, "No platform data\n");
 790                 return -ENODEV;
 791         }
 792         cfg = pdev->dev.platform_data;
 793
 794         if (!cfg->module_name[0] ||
 795             !cfg->osd.module_name[0] ||
 796             !cfg->venc.module_name[0]) {
 797                 v4l2_err(pdev->dev.driver, "vpbe display module names not defined\n");
 798                 return -EINVAL;
 799         }
 800
 801         vpbe_dev = kzalloc(sizeof(*vpbe_dev), GFP_KERNEL);
 802         if (!vpbe_dev)
 803                 return -ENOMEM;
 804
 805         vpbe_dev->cfg = cfg;
 806         vpbe_dev->ops = vpbe_dev_ops;
 807         vpbe_dev->pdev = &pdev->dev;
 808
 809         if (cfg->outputs->num_modes > 0)
 810                 vpbe_dev->current_timings = vpbe_dev->cfg->outputs[0].modes[0];
 811         else {
 812                 kfree(vpbe_dev);
 813                 return -ENODEV;
 814         }
 815
 816         /* set the driver data in platform device */
 817         platform_set_drvdata(pdev, vpbe_dev);
 818         mutex_init(&vpbe_dev->lock);
 819
 820         return 0;
 821 }
 822
 823 static int vpbe_remove(struct platform_device *device)
 824 {
 825         struct vpbe_device *vpbe_dev = platform_get_drvdata(device);
 826
 827         kfree(vpbe_dev);
 828
 829         return 0;
 830 }
 831
 832 static struct platform_driver vpbe_driver = {
 833         .driver = {
 834                 .name   = "vpbe_controller",
 835         },
 836         .probe = vpbe_probe,
 837         .remove = vpbe_remove,
 838 };
 839
 840 module_platform_driver(vpbe_driver);