Linux-libre 4.14.68-gnu
[librecmc/linux-libre.git] / drivers / media / dvb-frontends / bsbe1.h
1 /*
2  * bsbe1.h - ALPS BSBE1 tuner support
3  *
4  * This program is free software; you can redistribute it and/or
5  * modify it under the terms of the GNU General Public License
6  * as published by the Free Software Foundation; either version 2
7  * of the License, or (at your option) any later version.
8  *
9  *
10  * This program is distributed in the hope that it will be useful,
11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
13  * GNU General Public License for more details.
14  *
15  * To obtain the license, point your browser to
16  * http://www.gnu.org/copyleft/gpl.html
17  *
18  *
19  * the project's page is at https://linuxtv.org
20  */
21
22 #ifndef BSBE1_H
23 #define BSBE1_H
24
25 static u8 alps_bsbe1_inittab[] = {
26         0x01, 0x15,   /* XTAL = 4MHz, VCO = 352 MHz */
27         0x02, 0x30,   /* MCLK = 88 MHz */
28         0x03, 0x00,   /* ACR output 0 */
29         0x04, 0x7d,   /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
30         0x05, 0x05,   /* I2CT = 0, SCLT = 1, SDAT = 1 */
31         0x06, 0x00,   /* DAC output 0 */
32         0x08, 0x40,   /* DiSEqC off, LNB power on OP2/LOCK pin on */
33         0x09, 0x00,   /* FIFO */
34         0x0c, 0x51,   /* OP1/OP0 normal, val = 1 (LNB power on) */
35         0x0d, 0x82,   /* DC offset compensation = on, beta_agc1 = 2 */
36         0x0f, 0x92,   /* AGC1R */
37         0x10, 0x34,   /* AGC2O */
38         0x11, 0x84,   /* TLSR */
39         0x12, 0xb9,   /* CFD */
40         0x15, 0xc9,   /* lock detector threshold */
41         0x28, 0x00,   /* out imp: normal, type: parallel, FEC mode: QPSK */
42         0x33, 0xfc,   /* RS control */
43         0x34, 0x93,   /* count viterbi bit errors per 2E18 bytes */
44         0xff, 0xff
45 };
46
47
48 static int alps_bsbe1_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio)
49 {
50         u8 aclk = 0;
51         u8 bclk = 0;
52
53         if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; }
54         else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; }
55         else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; }
56         else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; }
57         else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; }
58         else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; }
59
60         stv0299_writereg(fe, 0x13, aclk);
61         stv0299_writereg(fe, 0x14, bclk);
62         stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
63         stv0299_writereg(fe, 0x20, (ratio >>  8) & 0xff);
64         stv0299_writereg(fe, 0x21, (ratio      ) & 0xf0);
65
66         return 0;
67 }
68
69 static int alps_bsbe1_tuner_set_params(struct dvb_frontend *fe)
70 {
71         struct dtv_frontend_properties *p = &fe->dtv_property_cache;
72         int ret;
73         u8 data[4];
74         u32 div;
75         struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
76         struct i2c_adapter *i2c = fe->tuner_priv;
77
78         if ((p->frequency < 950000) || (p->frequency > 2150000))
79                 return -EINVAL;
80
81         div = p->frequency / 1000;
82         data[0] = (div >> 8) & 0x7f;
83         data[1] = div & 0xff;
84         data[2] = 0x80 | ((div & 0x18000) >> 10) | 0x1;
85         data[3] = 0xe0;
86
87         if (fe->ops.i2c_gate_ctrl)
88                 fe->ops.i2c_gate_ctrl(fe, 1);
89         ret = i2c_transfer(i2c, &msg, 1);
90         return (ret != 1) ? -EIO : 0;
91 }
92
93 static struct stv0299_config alps_bsbe1_config = {
94         .demod_address = 0x68,
95         .inittab = alps_bsbe1_inittab,
96         .mclk = 88000000UL,
97         .invert = 1,
98         .skip_reinit = 0,
99         .min_delay_ms = 100,
100         .set_symbol_rate = alps_bsbe1_set_symbol_rate,
101 };
102
103 #endif