Linux-libre 5.4.47-gnu
[librecmc/linux-libre.git] / drivers / hwmon / lm73.c
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * LM73 Sensor driver
4  * Based on LM75
5  *
6  * Copyright (C) 2007, CenoSYS (www.cenosys.com).
7  * Copyright (C) 2009, Bollore telecom (www.bolloretelecom.eu).
8  *
9  * Guillaume Ligneul <guillaume.ligneul@gmail.com>
10  * Adrien Demarez <adrien.demarez@bolloretelecom.eu>
11  * Jeremy Laine <jeremy.laine@bolloretelecom.eu>
12  * Chris Verges <kg4ysn@gmail.com>
13  */
14
15 #include <linux/module.h>
16 #include <linux/init.h>
17 #include <linux/i2c.h>
18 #include <linux/hwmon.h>
19 #include <linux/hwmon-sysfs.h>
20 #include <linux/err.h>
21
22
23 /* Addresses scanned */
24 static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4c,
25                                         0x4d, 0x4e, I2C_CLIENT_END };
26
27 /* LM73 registers */
28 #define LM73_REG_INPUT          0x00
29 #define LM73_REG_CONF           0x01
30 #define LM73_REG_MAX            0x02
31 #define LM73_REG_MIN            0x03
32 #define LM73_REG_CTRL           0x04
33 #define LM73_REG_ID             0x07
34
35 #define LM73_ID                 0x9001  /* 0x0190, byte-swapped */
36 #define DRVNAME                 "lm73"
37 #define LM73_TEMP_MIN           (-256000 / 250)
38 #define LM73_TEMP_MAX           (255750 / 250)
39
40 #define LM73_CTRL_RES_SHIFT     5
41 #define LM73_CTRL_RES_MASK      (BIT(5) | BIT(6))
42 #define LM73_CTRL_TO_MASK       BIT(7)
43
44 #define LM73_CTRL_HI_SHIFT      2
45 #define LM73_CTRL_LO_SHIFT      1
46
47 static const unsigned short lm73_convrates[] = {
48         14,     /* 11-bits (0.25000 C/LSB): RES1 Bit = 0, RES0 Bit = 0 */
49         28,     /* 12-bits (0.12500 C/LSB): RES1 Bit = 0, RES0 Bit = 1 */
50         56,     /* 13-bits (0.06250 C/LSB): RES1 Bit = 1, RES0 Bit = 0 */
51         112,    /* 14-bits (0.03125 C/LSB): RES1 Bit = 1, RES0 Bit = 1 */
52 };
53
54 struct lm73_data {
55         struct i2c_client *client;
56         struct mutex lock;
57         u8 ctrl;                        /* control register value */
58 };
59
60 /*-----------------------------------------------------------------------*/
61
62 static ssize_t temp_store(struct device *dev, struct device_attribute *da,
63                           const char *buf, size_t count)
64 {
65         struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
66         struct lm73_data *data = dev_get_drvdata(dev);
67         long temp;
68         short value;
69         s32 err;
70
71         int status = kstrtol(buf, 10, &temp);
72         if (status < 0)
73                 return status;
74
75         /* Write value */
76         value = clamp_val(temp / 250, LM73_TEMP_MIN, LM73_TEMP_MAX) << 5;
77         err = i2c_smbus_write_word_swapped(data->client, attr->index, value);
78         return (err < 0) ? err : count;
79 }
80
81 static ssize_t temp_show(struct device *dev, struct device_attribute *da,
82                          char *buf)
83 {
84         struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
85         struct lm73_data *data = dev_get_drvdata(dev);
86         int temp;
87
88         s32 err = i2c_smbus_read_word_swapped(data->client, attr->index);
89         if (err < 0)
90                 return err;
91
92         /* use integer division instead of equivalent right shift to
93            guarantee arithmetic shift and preserve the sign */
94         temp = (((s16) err) * 250) / 32;
95         return scnprintf(buf, PAGE_SIZE, "%d\n", temp);
96 }
97
98 static ssize_t convrate_store(struct device *dev, struct device_attribute *da,
99                               const char *buf, size_t count)
100 {
101         struct lm73_data *data = dev_get_drvdata(dev);
102         unsigned long convrate;
103         s32 err;
104         int res = 0;
105
106         err = kstrtoul(buf, 10, &convrate);
107         if (err < 0)
108                 return err;
109
110         /*
111          * Convert the desired conversion rate into register bits.
112          * res is already initialized, and everything past the second-to-last
113          * value in the array is treated as belonging to the last value
114          * in the array.
115          */
116         while (res < (ARRAY_SIZE(lm73_convrates) - 1) &&
117                         convrate > lm73_convrates[res])
118                 res++;
119
120         mutex_lock(&data->lock);
121         data->ctrl &= LM73_CTRL_TO_MASK;
122         data->ctrl |= res << LM73_CTRL_RES_SHIFT;
123         err = i2c_smbus_write_byte_data(data->client, LM73_REG_CTRL,
124                                         data->ctrl);
125         mutex_unlock(&data->lock);
126
127         if (err < 0)
128                 return err;
129
130         return count;
131 }
132
133 static ssize_t convrate_show(struct device *dev, struct device_attribute *da,
134                              char *buf)
135 {
136         struct lm73_data *data = dev_get_drvdata(dev);
137         int res;
138
139         res = (data->ctrl & LM73_CTRL_RES_MASK) >> LM73_CTRL_RES_SHIFT;
140         return scnprintf(buf, PAGE_SIZE, "%hu\n", lm73_convrates[res]);
141 }
142
143 static ssize_t maxmin_alarm_show(struct device *dev,
144                                  struct device_attribute *da, char *buf)
145 {
146         struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
147         struct lm73_data *data = dev_get_drvdata(dev);
148         s32 ctrl;
149
150         mutex_lock(&data->lock);
151         ctrl = i2c_smbus_read_byte_data(data->client, LM73_REG_CTRL);
152         if (ctrl < 0)
153                 goto abort;
154         data->ctrl = ctrl;
155         mutex_unlock(&data->lock);
156
157         return scnprintf(buf, PAGE_SIZE, "%d\n", (ctrl >> attr->index) & 1);
158
159 abort:
160         mutex_unlock(&data->lock);
161         return ctrl;
162 }
163
164 /*-----------------------------------------------------------------------*/
165
166 /* sysfs attributes for hwmon */
167
168 static SENSOR_DEVICE_ATTR_RW(temp1_max, temp, LM73_REG_MAX);
169 static SENSOR_DEVICE_ATTR_RW(temp1_min, temp, LM73_REG_MIN);
170 static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, LM73_REG_INPUT);
171 static SENSOR_DEVICE_ATTR_RW(update_interval, convrate, 0);
172 static SENSOR_DEVICE_ATTR_RO(temp1_max_alarm, maxmin_alarm,
173                              LM73_CTRL_HI_SHIFT);
174 static SENSOR_DEVICE_ATTR_RO(temp1_min_alarm, maxmin_alarm,
175                              LM73_CTRL_LO_SHIFT);
176
177 static struct attribute *lm73_attrs[] = {
178         &sensor_dev_attr_temp1_input.dev_attr.attr,
179         &sensor_dev_attr_temp1_max.dev_attr.attr,
180         &sensor_dev_attr_temp1_min.dev_attr.attr,
181         &sensor_dev_attr_update_interval.dev_attr.attr,
182         &sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
183         &sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
184         NULL
185 };
186 ATTRIBUTE_GROUPS(lm73);
187
188 /*-----------------------------------------------------------------------*/
189
190 /* device probe and removal */
191
192 static int
193 lm73_probe(struct i2c_client *client, const struct i2c_device_id *id)
194 {
195         struct device *dev = &client->dev;
196         struct device *hwmon_dev;
197         struct lm73_data *data;
198         int ctrl;
199
200         data = devm_kzalloc(dev, sizeof(struct lm73_data), GFP_KERNEL);
201         if (!data)
202                 return -ENOMEM;
203
204         data->client = client;
205         mutex_init(&data->lock);
206
207         ctrl = i2c_smbus_read_byte_data(client, LM73_REG_CTRL);
208         if (ctrl < 0)
209                 return ctrl;
210         data->ctrl = ctrl;
211
212         hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
213                                                            data, lm73_groups);
214         if (IS_ERR(hwmon_dev))
215                 return PTR_ERR(hwmon_dev);
216
217         dev_info(dev, "sensor '%s'\n", client->name);
218
219         return 0;
220 }
221
222 static const struct i2c_device_id lm73_ids[] = {
223         { "lm73", 0 },
224         { /* LIST END */ }
225 };
226 MODULE_DEVICE_TABLE(i2c, lm73_ids);
227
228 /* Return 0 if detection is successful, -ENODEV otherwise */
229 static int lm73_detect(struct i2c_client *new_client,
230                         struct i2c_board_info *info)
231 {
232         struct i2c_adapter *adapter = new_client->adapter;
233         int id, ctrl, conf;
234
235         if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
236                                         I2C_FUNC_SMBUS_WORD_DATA))
237                 return -ENODEV;
238
239         /*
240          * Do as much detection as possible with byte reads first, as word
241          * reads can confuse other devices.
242          */
243         ctrl = i2c_smbus_read_byte_data(new_client, LM73_REG_CTRL);
244         if (ctrl < 0 || (ctrl & 0x10))
245                 return -ENODEV;
246
247         conf = i2c_smbus_read_byte_data(new_client, LM73_REG_CONF);
248         if (conf < 0 || (conf & 0x0c))
249                 return -ENODEV;
250
251         id = i2c_smbus_read_byte_data(new_client, LM73_REG_ID);
252         if (id < 0 || id != (LM73_ID & 0xff))
253                 return -ENODEV;
254
255         /* Check device ID */
256         id = i2c_smbus_read_word_data(new_client, LM73_REG_ID);
257         if (id < 0 || id != LM73_ID)
258                 return -ENODEV;
259
260         strlcpy(info->type, "lm73", I2C_NAME_SIZE);
261
262         return 0;
263 }
264
265 static struct i2c_driver lm73_driver = {
266         .class          = I2C_CLASS_HWMON,
267         .driver = {
268                 .name   = "lm73",
269         },
270         .probe          = lm73_probe,
271         .id_table       = lm73_ids,
272         .detect         = lm73_detect,
273         .address_list   = normal_i2c,
274 };
275
276 module_i2c_driver(lm73_driver);
277
278 MODULE_AUTHOR("Guillaume Ligneul <guillaume.ligneul@gmail.com>");
279 MODULE_DESCRIPTION("LM73 driver");
280 MODULE_LICENSE("GPL");