Linux-libre 5.4.49-gnu
[librecmc/linux-libre.git] / drivers / firmware / raspberrypi.c
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Defines interfaces for interacting wtih the Raspberry Pi firmware's
4  * property channel.
5  *
6  * Copyright © 2015 Broadcom
7  */
8
9 #include <linux/dma-mapping.h>
10 #include <linux/mailbox_client.h>
11 #include <linux/module.h>
12 #include <linux/of_platform.h>
13 #include <linux/platform_device.h>
14 #include <linux/slab.h>
15 #include <soc/bcm2835/raspberrypi-firmware.h>
16
17 #define MBOX_MSG(chan, data28)          (((data28) & ~0xf) | ((chan) & 0xf))
18 #define MBOX_CHAN(msg)                  ((msg) & 0xf)
19 #define MBOX_DATA28(msg)                ((msg) & ~0xf)
20 #define MBOX_CHAN_PROPERTY              8
21
22 static struct platform_device *rpi_hwmon;
23 static struct platform_device *rpi_clk;
24
25 struct rpi_firmware {
26         struct mbox_client cl;
27         struct mbox_chan *chan; /* The property channel. */
28         struct completion c;
29         u32 enabled;
30 };
31
32 static DEFINE_MUTEX(transaction_lock);
33
34 static void response_callback(struct mbox_client *cl, void *msg)
35 {
36         struct rpi_firmware *fw = container_of(cl, struct rpi_firmware, cl);
37         complete(&fw->c);
38 }
39
40 /*
41  * Sends a request to the firmware through the BCM2835 mailbox driver,
42  * and synchronously waits for the reply.
43  */
44 static int
45 rpi_firmware_transaction(struct rpi_firmware *fw, u32 chan, u32 data)
46 {
47         u32 message = MBOX_MSG(chan, data);
48         int ret;
49
50         WARN_ON(data & 0xf);
51
52         mutex_lock(&transaction_lock);
53         reinit_completion(&fw->c);
54         ret = mbox_send_message(fw->chan, &message);
55         if (ret >= 0) {
56                 if (wait_for_completion_timeout(&fw->c, HZ)) {
57                         ret = 0;
58                 } else {
59                         ret = -ETIMEDOUT;
60                         WARN_ONCE(1, "Firmware transaction timeout");
61                 }
62         } else {
63                 dev_err(fw->cl.dev, "mbox_send_message returned %d\n", ret);
64         }
65         mutex_unlock(&transaction_lock);
66
67         return ret;
68 }
69
70 /**
71  * rpi_firmware_property_list - Submit firmware property list
72  * @fw:         Pointer to firmware structure from rpi_firmware_get().
73  * @data:       Buffer holding tags.
74  * @tag_size:   Size of tags buffer.
75  *
76  * Submits a set of concatenated tags to the VPU firmware through the
77  * mailbox property interface.
78  *
79  * The buffer header and the ending tag are added by this function and
80  * don't need to be supplied, just the actual tags for your operation.
81  * See struct rpi_firmware_property_tag_header for the per-tag
82  * structure.
83  */
84 int rpi_firmware_property_list(struct rpi_firmware *fw,
85                                void *data, size_t tag_size)
86 {
87         size_t size = tag_size + 12;
88         u32 *buf;
89         dma_addr_t bus_addr;
90         int ret;
91
92         /* Packets are processed a dword at a time. */
93         if (size & 3)
94                 return -EINVAL;
95
96         buf = dma_alloc_coherent(fw->cl.dev, PAGE_ALIGN(size), &bus_addr,
97                                  GFP_ATOMIC);
98         if (!buf)
99                 return -ENOMEM;
100
101         /* The firmware will error out without parsing in this case. */
102         WARN_ON(size >= 1024 * 1024);
103
104         buf[0] = size;
105         buf[1] = RPI_FIRMWARE_STATUS_REQUEST;
106         memcpy(&buf[2], data, tag_size);
107         buf[size / 4 - 1] = RPI_FIRMWARE_PROPERTY_END;
108         wmb();
109
110         ret = rpi_firmware_transaction(fw, MBOX_CHAN_PROPERTY, bus_addr);
111
112         rmb();
113         memcpy(data, &buf[2], tag_size);
114         if (ret == 0 && buf[1] != RPI_FIRMWARE_STATUS_SUCCESS) {
115                 /*
116                  * The tag name here might not be the one causing the
117                  * error, if there were multiple tags in the request.
118                  * But single-tag is the most common, so go with it.
119                  */
120                 dev_err(fw->cl.dev, "Request 0x%08x returned status 0x%08x\n",
121                         buf[2], buf[1]);
122                 ret = -EINVAL;
123         }
124
125         dma_free_coherent(fw->cl.dev, PAGE_ALIGN(size), buf, bus_addr);
126
127         return ret;
128 }
129 EXPORT_SYMBOL_GPL(rpi_firmware_property_list);
130
131 /**
132  * rpi_firmware_property - Submit single firmware property
133  * @fw:         Pointer to firmware structure from rpi_firmware_get().
134  * @tag:        One of enum_mbox_property_tag.
135  * @tag_data:   Tag data buffer.
136  * @buf_size:   Buffer size.
137  *
138  * Submits a single tag to the VPU firmware through the mailbox
139  * property interface.
140  *
141  * This is a convenience wrapper around
142  * rpi_firmware_property_list() to avoid some of the
143  * boilerplate in property calls.
144  */
145 int rpi_firmware_property(struct rpi_firmware *fw,
146                           u32 tag, void *tag_data, size_t buf_size)
147 {
148         struct rpi_firmware_property_tag_header *header;
149         int ret;
150
151         /* Some mailboxes can use over 1k bytes. Rather than checking
152          * size and using stack or kmalloc depending on requirements,
153          * just use kmalloc. Mailboxes don't get called enough to worry
154          * too much about the time taken in the allocation.
155          */
156         void *data = kmalloc(sizeof(*header) + buf_size, GFP_KERNEL);
157
158         if (!data)
159                 return -ENOMEM;
160
161         header = data;
162         header->tag = tag;
163         header->buf_size = buf_size;
164         header->req_resp_size = 0;
165         memcpy(data + sizeof(*header), tag_data, buf_size);
166
167         ret = rpi_firmware_property_list(fw, data, buf_size + sizeof(*header));
168
169         memcpy(tag_data, data + sizeof(*header), buf_size);
170
171         kfree(data);
172
173         return ret;
174 }
175 EXPORT_SYMBOL_GPL(rpi_firmware_property);
176
177 static void
178 rpi_firmware_print_firmware_revision(struct rpi_firmware *fw)
179 {
180         u32 packet;
181         int ret = rpi_firmware_property(fw,
182                                         RPI_FIRMWARE_GET_FIRMWARE_REVISION,
183                                         &packet, sizeof(packet));
184
185         if (ret == 0) {
186                 struct tm tm;
187
188                 time64_to_tm(packet, 0, &tm);
189
190                 dev_info(fw->cl.dev,
191                          "Attached to firmware from %04ld-%02d-%02d %02d:%02d\n",
192                          tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday,
193                          tm.tm_hour, tm.tm_min);
194         }
195 }
196
197 static void
198 rpi_register_hwmon_driver(struct device *dev, struct rpi_firmware *fw)
199 {
200         u32 packet;
201         int ret = rpi_firmware_property(fw, RPI_FIRMWARE_GET_THROTTLED,
202                                         &packet, sizeof(packet));
203
204         if (ret)
205                 return;
206
207         rpi_hwmon = platform_device_register_data(dev, "raspberrypi-hwmon",
208                                                   -1, NULL, 0);
209 }
210
211 static void rpi_register_clk_driver(struct device *dev)
212 {
213         rpi_clk = platform_device_register_data(dev, "raspberrypi-clk",
214                                                 -1, NULL, 0);
215 }
216
217 static int rpi_firmware_probe(struct platform_device *pdev)
218 {
219         struct device *dev = &pdev->dev;
220         struct rpi_firmware *fw;
221
222         fw = devm_kzalloc(dev, sizeof(*fw), GFP_KERNEL);
223         if (!fw)
224                 return -ENOMEM;
225
226         fw->cl.dev = dev;
227         fw->cl.rx_callback = response_callback;
228         fw->cl.tx_block = true;
229
230         fw->chan = mbox_request_channel(&fw->cl, 0);
231         if (IS_ERR(fw->chan)) {
232                 int ret = PTR_ERR(fw->chan);
233                 if (ret != -EPROBE_DEFER)
234                         dev_err(dev, "Failed to get mbox channel: %d\n", ret);
235                 return ret;
236         }
237
238         init_completion(&fw->c);
239
240         platform_set_drvdata(pdev, fw);
241
242         rpi_firmware_print_firmware_revision(fw);
243         rpi_register_hwmon_driver(dev, fw);
244         rpi_register_clk_driver(dev);
245
246         return 0;
247 }
248
249 static void rpi_firmware_shutdown(struct platform_device *pdev)
250 {
251         struct rpi_firmware *fw = platform_get_drvdata(pdev);
252
253         if (!fw)
254                 return;
255
256         rpi_firmware_property(fw, RPI_FIRMWARE_NOTIFY_REBOOT, NULL, 0);
257 }
258
259 static int rpi_firmware_remove(struct platform_device *pdev)
260 {
261         struct rpi_firmware *fw = platform_get_drvdata(pdev);
262
263         platform_device_unregister(rpi_hwmon);
264         rpi_hwmon = NULL;
265         platform_device_unregister(rpi_clk);
266         rpi_clk = NULL;
267         mbox_free_channel(fw->chan);
268
269         return 0;
270 }
271
272 /**
273  * rpi_firmware_get - Get pointer to rpi_firmware structure.
274  * @firmware_node:    Pointer to the firmware Device Tree node.
275  *
276  * Returns NULL is the firmware device is not ready.
277  */
278 struct rpi_firmware *rpi_firmware_get(struct device_node *firmware_node)
279 {
280         struct platform_device *pdev = of_find_device_by_node(firmware_node);
281
282         if (!pdev)
283                 return NULL;
284
285         return platform_get_drvdata(pdev);
286 }
287 EXPORT_SYMBOL_GPL(rpi_firmware_get);
288
289 static const struct of_device_id rpi_firmware_of_match[] = {
290         { .compatible = "raspberrypi,bcm2835-firmware", },
291         {},
292 };
293 MODULE_DEVICE_TABLE(of, rpi_firmware_of_match);
294
295 static struct platform_driver rpi_firmware_driver = {
296         .driver = {
297                 .name = "raspberrypi-firmware",
298                 .of_match_table = rpi_firmware_of_match,
299         },
300         .probe          = rpi_firmware_probe,
301         .shutdown       = rpi_firmware_shutdown,
302         .remove         = rpi_firmware_remove,
303 };
304 module_platform_driver(rpi_firmware_driver);
305
306 MODULE_AUTHOR("Eric Anholt <eric@anholt.net>");
307 MODULE_DESCRIPTION("Raspberry Pi firmware driver");
308 MODULE_LICENSE("GPL v2");