Linux-libre 5.4.48-gnu
[librecmc/linux-libre.git] / drivers / cpufreq / armada-37xx-cpufreq.c
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * CPU frequency scaling support for Armada 37xx platform.
4  *
5  * Copyright (C) 2017 Marvell
6  *
7  * Gregory CLEMENT <gregory.clement@free-electrons.com>
8  */
9
10 #include <linux/clk.h>
11 #include <linux/cpu.h>
12 #include <linux/cpufreq.h>
13 #include <linux/err.h>
14 #include <linux/interrupt.h>
15 #include <linux/io.h>
16 #include <linux/mfd/syscon.h>
17 #include <linux/module.h>
18 #include <linux/of_address.h>
19 #include <linux/of_device.h>
20 #include <linux/of_irq.h>
21 #include <linux/platform_device.h>
22 #include <linux/pm_opp.h>
23 #include <linux/regmap.h>
24 #include <linux/slab.h>
25
26 #include "cpufreq-dt.h"
27
28 /* Power management in North Bridge register set */
29 #define ARMADA_37XX_NB_L0L1     0x18
30 #define ARMADA_37XX_NB_L2L3     0x1C
31 #define  ARMADA_37XX_NB_TBG_DIV_OFF     13
32 #define  ARMADA_37XX_NB_TBG_DIV_MASK    0x7
33 #define  ARMADA_37XX_NB_CLK_SEL_OFF     11
34 #define  ARMADA_37XX_NB_CLK_SEL_MASK    0x1
35 #define  ARMADA_37XX_NB_CLK_SEL_TBG     0x1
36 #define  ARMADA_37XX_NB_TBG_SEL_OFF     9
37 #define  ARMADA_37XX_NB_TBG_SEL_MASK    0x3
38 #define  ARMADA_37XX_NB_VDD_SEL_OFF     6
39 #define  ARMADA_37XX_NB_VDD_SEL_MASK    0x3
40 #define  ARMADA_37XX_NB_CONFIG_SHIFT    16
41 #define ARMADA_37XX_NB_DYN_MOD  0x24
42 #define  ARMADA_37XX_NB_CLK_SEL_EN      BIT(26)
43 #define  ARMADA_37XX_NB_TBG_EN          BIT(28)
44 #define  ARMADA_37XX_NB_DIV_EN          BIT(29)
45 #define  ARMADA_37XX_NB_VDD_EN          BIT(30)
46 #define  ARMADA_37XX_NB_DFS_EN          BIT(31)
47 #define ARMADA_37XX_NB_CPU_LOAD 0x30
48 #define  ARMADA_37XX_NB_CPU_LOAD_MASK   0x3
49 #define  ARMADA_37XX_DVFS_LOAD_0        0
50 #define  ARMADA_37XX_DVFS_LOAD_1        1
51 #define  ARMADA_37XX_DVFS_LOAD_2        2
52 #define  ARMADA_37XX_DVFS_LOAD_3        3
53
54 /* AVS register set */
55 #define ARMADA_37XX_AVS_CTL0            0x0
56 #define  ARMADA_37XX_AVS_ENABLE         BIT(30)
57 #define  ARMADA_37XX_AVS_HIGH_VDD_LIMIT 16
58 #define  ARMADA_37XX_AVS_LOW_VDD_LIMIT  22
59 #define  ARMADA_37XX_AVS_VDD_MASK       0x3F
60 #define ARMADA_37XX_AVS_CTL2            0x8
61 #define  ARMADA_37XX_AVS_LOW_VDD_EN     BIT(6)
62 #define ARMADA_37XX_AVS_VSET(x)     (0x1C + 4 * (x))
63
64 /*
65  * On Armada 37xx the Power management manages 4 level of CPU load,
66  * each level can be associated with a CPU clock source, a CPU
67  * divider, a VDD level, etc...
68  */
69 #define LOAD_LEVEL_NR   4
70
71 #define MIN_VOLT_MV 1000
72
73 /*  AVS value for the corresponding voltage (in mV) */
74 static int avs_map[] = {
75         747, 758, 770, 782, 793, 805, 817, 828, 840, 852, 863, 875, 887, 898,
76         910, 922, 933, 945, 957, 968, 980, 992, 1003, 1015, 1027, 1038, 1050,
77         1062, 1073, 1085, 1097, 1108, 1120, 1132, 1143, 1155, 1167, 1178, 1190,
78         1202, 1213, 1225, 1237, 1248, 1260, 1272, 1283, 1295, 1307, 1318, 1330,
79         1342
80 };
81
82 struct armada37xx_cpufreq_state {
83         struct regmap *regmap;
84         u32 nb_l0l1;
85         u32 nb_l2l3;
86         u32 nb_dyn_mod;
87         u32 nb_cpu_load;
88 };
89
90 static struct armada37xx_cpufreq_state *armada37xx_cpufreq_state;
91
92 struct armada_37xx_dvfs {
93         u32 cpu_freq_max;
94         u8 divider[LOAD_LEVEL_NR];
95         u32 avs[LOAD_LEVEL_NR];
96 };
97
98 static struct armada_37xx_dvfs armada_37xx_dvfs[] = {
99         {.cpu_freq_max = 1200*1000*1000, .divider = {1, 2, 4, 6} },
100         {.cpu_freq_max = 1000*1000*1000, .divider = {1, 2, 4, 5} },
101         {.cpu_freq_max = 800*1000*1000,  .divider = {1, 2, 3, 4} },
102         {.cpu_freq_max = 600*1000*1000,  .divider = {2, 4, 5, 6} },
103 };
104
105 static struct armada_37xx_dvfs *armada_37xx_cpu_freq_info_get(u32 freq)
106 {
107         int i;
108
109         for (i = 0; i < ARRAY_SIZE(armada_37xx_dvfs); i++) {
110                 if (freq == armada_37xx_dvfs[i].cpu_freq_max)
111                         return &armada_37xx_dvfs[i];
112         }
113
114         pr_err("Unsupported CPU frequency %d MHz\n", freq/1000000);
115         return NULL;
116 }
117
118 /*
119  * Setup the four level managed by the hardware. Once the four level
120  * will be configured then the DVFS will be enabled.
121  */
122 static void __init armada37xx_cpufreq_dvfs_setup(struct regmap *base,
123                                                  struct clk *clk, u8 *divider)
124 {
125         int load_lvl;
126         struct clk *parent;
127
128         for (load_lvl = 0; load_lvl < LOAD_LEVEL_NR; load_lvl++) {
129                 unsigned int reg, mask, val, offset = 0;
130
131                 if (load_lvl <= ARMADA_37XX_DVFS_LOAD_1)
132                         reg = ARMADA_37XX_NB_L0L1;
133                 else
134                         reg = ARMADA_37XX_NB_L2L3;
135
136                 if (load_lvl == ARMADA_37XX_DVFS_LOAD_0 ||
137                     load_lvl == ARMADA_37XX_DVFS_LOAD_2)
138                         offset += ARMADA_37XX_NB_CONFIG_SHIFT;
139
140                 /* Set cpu clock source, for all the level we use TBG */
141                 val = ARMADA_37XX_NB_CLK_SEL_TBG << ARMADA_37XX_NB_CLK_SEL_OFF;
142                 mask = (ARMADA_37XX_NB_CLK_SEL_MASK
143                         << ARMADA_37XX_NB_CLK_SEL_OFF);
144
145                 /*
146                  * Set cpu divider based on the pre-computed array in
147                  * order to have balanced step.
148                  */
149                 val |= divider[load_lvl] << ARMADA_37XX_NB_TBG_DIV_OFF;
150                 mask |= (ARMADA_37XX_NB_TBG_DIV_MASK
151                         << ARMADA_37XX_NB_TBG_DIV_OFF);
152
153                 /* Set VDD divider which is actually the load level. */
154                 val |= load_lvl << ARMADA_37XX_NB_VDD_SEL_OFF;
155                 mask |= (ARMADA_37XX_NB_VDD_SEL_MASK
156                         << ARMADA_37XX_NB_VDD_SEL_OFF);
157
158                 val <<= offset;
159                 mask <<= offset;
160
161                 regmap_update_bits(base, reg, mask, val);
162         }
163
164         /*
165          * Set cpu clock source, for all the level we keep the same
166          * clock source that the one already configured. For this one
167          * we need to use the clock framework
168          */
169         parent = clk_get_parent(clk);
170         clk_set_parent(clk, parent);
171 }
172
173 /*
174  * Find out the armada 37x supported AVS value whose voltage value is
175  * the round-up closest to the target voltage value.
176  */
177 static u32 armada_37xx_avs_val_match(int target_vm)
178 {
179         u32 avs;
180
181         /* Find out the round-up closest supported voltage value */
182         for (avs = 0; avs < ARRAY_SIZE(avs_map); avs++)
183                 if (avs_map[avs] >= target_vm)
184                         break;
185
186         /*
187          * If all supported voltages are smaller than target one,
188          * choose the largest supported voltage
189          */
190         if (avs == ARRAY_SIZE(avs_map))
191                 avs = ARRAY_SIZE(avs_map) - 1;
192
193         return avs;
194 }
195
196 /*
197  * For Armada 37xx soc, L0(VSET0) VDD AVS value is set to SVC revision
198  * value or a default value when SVC is not supported.
199  * - L0 can be read out from the register of AVS_CTRL_0 and L0 voltage
200  *   can be got from the mapping table of avs_map.
201  * - L1 voltage should be about 100mv smaller than L0 voltage
202  * - L2 & L3 voltage should be about 150mv smaller than L0 voltage.
203  * This function calculates L1 & L2 & L3 AVS values dynamically based
204  * on L0 voltage and fill all AVS values to the AVS value table.
205  */
206 static void __init armada37xx_cpufreq_avs_configure(struct regmap *base,
207                                                 struct armada_37xx_dvfs *dvfs)
208 {
209         unsigned int target_vm;
210         int load_level = 0;
211         u32 l0_vdd_min;
212
213         if (base == NULL)
214                 return;
215
216         /* Get L0 VDD min value */
217         regmap_read(base, ARMADA_37XX_AVS_CTL0, &l0_vdd_min);
218         l0_vdd_min = (l0_vdd_min >> ARMADA_37XX_AVS_LOW_VDD_LIMIT) &
219                 ARMADA_37XX_AVS_VDD_MASK;
220         if (l0_vdd_min >= ARRAY_SIZE(avs_map))  {
221                 pr_err("L0 VDD MIN %d is not correct.\n", l0_vdd_min);
222                 return;
223         }
224         dvfs->avs[0] = l0_vdd_min;
225
226         if (avs_map[l0_vdd_min] <= MIN_VOLT_MV) {
227                 /*
228                  * If L0 voltage is smaller than 1000mv, then all VDD sets
229                  * use L0 voltage;
230                  */
231                 u32 avs_min = armada_37xx_avs_val_match(MIN_VOLT_MV);
232
233                 for (load_level = 1; load_level < LOAD_LEVEL_NR; load_level++)
234                         dvfs->avs[load_level] = avs_min;
235
236                 return;
237         }
238
239         /*
240          * L1 voltage is equal to L0 voltage - 100mv and it must be
241          * larger than 1000mv
242          */
243
244         target_vm = avs_map[l0_vdd_min] - 100;
245         target_vm = target_vm > MIN_VOLT_MV ? target_vm : MIN_VOLT_MV;
246         dvfs->avs[1] = armada_37xx_avs_val_match(target_vm);
247
248         /*
249          * L2 & L3 voltage is equal to L0 voltage - 150mv and it must
250          * be larger than 1000mv
251          */
252         target_vm = avs_map[l0_vdd_min] - 150;
253         target_vm = target_vm > MIN_VOLT_MV ? target_vm : MIN_VOLT_MV;
254         dvfs->avs[2] = dvfs->avs[3] = armada_37xx_avs_val_match(target_vm);
255 }
256
257 static void __init armada37xx_cpufreq_avs_setup(struct regmap *base,
258                                                 struct armada_37xx_dvfs *dvfs)
259 {
260         unsigned int avs_val = 0;
261         int load_level = 0;
262
263         if (base == NULL)
264                 return;
265
266         /* Disable AVS before the configuration */
267         regmap_update_bits(base, ARMADA_37XX_AVS_CTL0,
268                            ARMADA_37XX_AVS_ENABLE, 0);
269
270
271         /* Enable low voltage mode */
272         regmap_update_bits(base, ARMADA_37XX_AVS_CTL2,
273                            ARMADA_37XX_AVS_LOW_VDD_EN,
274                            ARMADA_37XX_AVS_LOW_VDD_EN);
275
276
277         for (load_level = 1; load_level < LOAD_LEVEL_NR; load_level++) {
278                 avs_val = dvfs->avs[load_level];
279                 regmap_update_bits(base, ARMADA_37XX_AVS_VSET(load_level-1),
280                     ARMADA_37XX_AVS_VDD_MASK << ARMADA_37XX_AVS_HIGH_VDD_LIMIT |
281                     ARMADA_37XX_AVS_VDD_MASK << ARMADA_37XX_AVS_LOW_VDD_LIMIT,
282                     avs_val << ARMADA_37XX_AVS_HIGH_VDD_LIMIT |
283                     avs_val << ARMADA_37XX_AVS_LOW_VDD_LIMIT);
284         }
285
286         /* Enable AVS after the configuration */
287         regmap_update_bits(base, ARMADA_37XX_AVS_CTL0,
288                            ARMADA_37XX_AVS_ENABLE,
289                            ARMADA_37XX_AVS_ENABLE);
290
291 }
292
293 static void armada37xx_cpufreq_disable_dvfs(struct regmap *base)
294 {
295         unsigned int reg = ARMADA_37XX_NB_DYN_MOD,
296                 mask = ARMADA_37XX_NB_DFS_EN;
297
298         regmap_update_bits(base, reg, mask, 0);
299 }
300
301 static void __init armada37xx_cpufreq_enable_dvfs(struct regmap *base)
302 {
303         unsigned int val, reg = ARMADA_37XX_NB_CPU_LOAD,
304                 mask = ARMADA_37XX_NB_CPU_LOAD_MASK;
305
306         /* Start with the highest load (0) */
307         val = ARMADA_37XX_DVFS_LOAD_0;
308         regmap_update_bits(base, reg, mask, val);
309
310         /* Now enable DVFS for the CPUs */
311         reg = ARMADA_37XX_NB_DYN_MOD;
312         mask =  ARMADA_37XX_NB_CLK_SEL_EN | ARMADA_37XX_NB_TBG_EN |
313                 ARMADA_37XX_NB_DIV_EN | ARMADA_37XX_NB_VDD_EN |
314                 ARMADA_37XX_NB_DFS_EN;
315
316         regmap_update_bits(base, reg, mask, mask);
317 }
318
319 static int armada37xx_cpufreq_suspend(struct cpufreq_policy *policy)
320 {
321         struct armada37xx_cpufreq_state *state = armada37xx_cpufreq_state;
322
323         regmap_read(state->regmap, ARMADA_37XX_NB_L0L1, &state->nb_l0l1);
324         regmap_read(state->regmap, ARMADA_37XX_NB_L2L3, &state->nb_l2l3);
325         regmap_read(state->regmap, ARMADA_37XX_NB_CPU_LOAD,
326                     &state->nb_cpu_load);
327         regmap_read(state->regmap, ARMADA_37XX_NB_DYN_MOD, &state->nb_dyn_mod);
328
329         return 0;
330 }
331
332 static int armada37xx_cpufreq_resume(struct cpufreq_policy *policy)
333 {
334         struct armada37xx_cpufreq_state *state = armada37xx_cpufreq_state;
335
336         /* Ensure DVFS is disabled otherwise the following registers are RO */
337         armada37xx_cpufreq_disable_dvfs(state->regmap);
338
339         regmap_write(state->regmap, ARMADA_37XX_NB_L0L1, state->nb_l0l1);
340         regmap_write(state->regmap, ARMADA_37XX_NB_L2L3, state->nb_l2l3);
341         regmap_write(state->regmap, ARMADA_37XX_NB_CPU_LOAD,
342                      state->nb_cpu_load);
343
344         /*
345          * NB_DYN_MOD register is the one that actually enable back DVFS if it
346          * was enabled before the suspend operation. This must be done last
347          * otherwise other registers are not writable.
348          */
349         regmap_write(state->regmap, ARMADA_37XX_NB_DYN_MOD, state->nb_dyn_mod);
350
351         return 0;
352 }
353
354 static int __init armada37xx_cpufreq_driver_init(void)
355 {
356         struct cpufreq_dt_platform_data pdata;
357         struct armada_37xx_dvfs *dvfs;
358         struct platform_device *pdev;
359         unsigned long freq;
360         unsigned int cur_frequency, base_frequency;
361         struct regmap *nb_pm_base, *avs_base;
362         struct device *cpu_dev;
363         int load_lvl, ret;
364         struct clk *clk, *parent;
365
366         nb_pm_base =
367                 syscon_regmap_lookup_by_compatible("marvell,armada-3700-nb-pm");
368
369         if (IS_ERR(nb_pm_base))
370                 return -ENODEV;
371
372         avs_base =
373                 syscon_regmap_lookup_by_compatible("marvell,armada-3700-avs");
374
375         /* if AVS is not present don't use it but still try to setup dvfs */
376         if (IS_ERR(avs_base)) {
377                 pr_info("Syscon failed for Adapting Voltage Scaling: skip it\n");
378                 avs_base = NULL;
379         }
380         /* Before doing any configuration on the DVFS first, disable it */
381         armada37xx_cpufreq_disable_dvfs(nb_pm_base);
382
383         /*
384          * On CPU 0 register the operating points supported (which are
385          * the nominal CPU frequency and full integer divisions of
386          * it).
387          */
388         cpu_dev = get_cpu_device(0);
389         if (!cpu_dev) {
390                 dev_err(cpu_dev, "Cannot get CPU\n");
391                 return -ENODEV;
392         }
393
394         clk = clk_get(cpu_dev, 0);
395         if (IS_ERR(clk)) {
396                 dev_err(cpu_dev, "Cannot get clock for CPU0\n");
397                 return PTR_ERR(clk);
398         }
399
400         parent = clk_get_parent(clk);
401         if (IS_ERR(parent)) {
402                 dev_err(cpu_dev, "Cannot get parent clock for CPU0\n");
403                 clk_put(clk);
404                 return PTR_ERR(parent);
405         }
406
407         /* Get parent CPU frequency */
408         base_frequency =  clk_get_rate(parent);
409
410         if (!base_frequency) {
411                 dev_err(cpu_dev, "Failed to get parent clock rate for CPU\n");
412                 clk_put(clk);
413                 return -EINVAL;
414         }
415
416         /* Get nominal (current) CPU frequency */
417         cur_frequency = clk_get_rate(clk);
418         if (!cur_frequency) {
419                 dev_err(cpu_dev, "Failed to get clock rate for CPU\n");
420                 clk_put(clk);
421                 return -EINVAL;
422         }
423
424         dvfs = armada_37xx_cpu_freq_info_get(cur_frequency);
425         if (!dvfs) {
426                 clk_put(clk);
427                 return -EINVAL;
428         }
429
430         armada37xx_cpufreq_state = kmalloc(sizeof(*armada37xx_cpufreq_state),
431                                            GFP_KERNEL);
432         if (!armada37xx_cpufreq_state) {
433                 clk_put(clk);
434                 return -ENOMEM;
435         }
436
437         armada37xx_cpufreq_state->regmap = nb_pm_base;
438
439         armada37xx_cpufreq_avs_configure(avs_base, dvfs);
440         armada37xx_cpufreq_avs_setup(avs_base, dvfs);
441
442         armada37xx_cpufreq_dvfs_setup(nb_pm_base, clk, dvfs->divider);
443         clk_put(clk);
444
445         for (load_lvl = ARMADA_37XX_DVFS_LOAD_0; load_lvl < LOAD_LEVEL_NR;
446              load_lvl++) {
447                 unsigned long u_volt = avs_map[dvfs->avs[load_lvl]] * 1000;
448                 freq = base_frequency / dvfs->divider[load_lvl];
449                 ret = dev_pm_opp_add(cpu_dev, freq, u_volt);
450                 if (ret)
451                         goto remove_opp;
452
453
454         }
455
456         /* Now that everything is setup, enable the DVFS at hardware level */
457         armada37xx_cpufreq_enable_dvfs(nb_pm_base);
458
459         pdata.suspend = armada37xx_cpufreq_suspend;
460         pdata.resume = armada37xx_cpufreq_resume;
461
462         pdev = platform_device_register_data(NULL, "cpufreq-dt", -1, &pdata,
463                                              sizeof(pdata));
464         ret = PTR_ERR_OR_ZERO(pdev);
465         if (ret)
466                 goto disable_dvfs;
467
468         return 0;
469
470 disable_dvfs:
471         armada37xx_cpufreq_disable_dvfs(nb_pm_base);
472 remove_opp:
473         /* clean-up the already added opp before leaving */
474         while (load_lvl-- > ARMADA_37XX_DVFS_LOAD_0) {
475                 freq = cur_frequency / dvfs->divider[load_lvl];
476                 dev_pm_opp_remove(cpu_dev, freq);
477         }
478
479         kfree(armada37xx_cpufreq_state);
480
481         return ret;
482 }
483 /* late_initcall, to guarantee the driver is loaded after A37xx clock driver */
484 late_initcall(armada37xx_cpufreq_driver_init);
485
486 MODULE_AUTHOR("Gregory CLEMENT <gregory.clement@free-electrons.com>");
487 MODULE_DESCRIPTION("Armada 37xx cpufreq driver");
488 MODULE_LICENSE("GPL");