drivers/char/mwave/smapi.c

   1 /*
   2 *
   3 * smapi.c -- SMAPI interface routines
   4 *
   5 *
   6 * Written By: Mike Sullivan IBM Corporation
   7 *
   8 * Copyright (C) 1999 IBM Corporation
   9 *
  10 * This program is free software; you can redistribute it and/or modify
  11 * it under the terms of the GNU General Public License as published by
  12 * the Free Software Foundation; either version 2 of the License, or
  13 * (at your option) any later version.
  14 *
  15 * This program is distributed in the hope that it will be useful,
  16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18 * GNU General Public License for more details.
  19 *
  20 * NO WARRANTY
  21 * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
  22 * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
  23 * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
  24 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
  25 * solely responsible for determining the appropriateness of using and
  26 * distributing the Program and assumes all risks associated with its
  27 * exercise of rights under this Agreement, including but not limited to
  28 * the risks and costs of program errors, damage to or loss of data,
  29 * programs or equipment, and unavailability or interruption of operations.
  30 *
  31 * DISCLAIMER OF LIABILITY
  32 * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
  33 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  34 * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
  35 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
  36 * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
  37 * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
  38 * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
  39 *
  40 * You should have received a copy of the GNU General Public License
  41 * along with this program; if not, write to the Free Software
  42 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  43 *
  44 *
  45 * 10/23/2000 - Alpha Release
  46 *       First release to the public
  47 */
  48
  49 #include <linux/kernel.h>
  50 #include <linux/mc146818rtc.h>  /* CMOS defines */
  51 #include "smapi.h"
  52 #include "mwavedd.h"
  53
  54 static unsigned short g_usSmapiPort = 0;
  55
  56
  57 static int smapi_request(unsigned short inBX, unsigned short inCX,
  58                          unsigned short inDI, unsigned short inSI,
  59                          unsigned short *outAX, unsigned short *outBX,
  60                          unsigned short *outCX, unsigned short *outDX,
  61                          unsigned short *outDI, unsigned short *outSI)
  62 {
  63         unsigned short myoutAX = 2, *pmyoutAX = &myoutAX;
  64         unsigned short myoutBX = 3, *pmyoutBX = &myoutBX;
  65         unsigned short myoutCX = 4, *pmyoutCX = &myoutCX;
  66         unsigned short myoutDX = 5, *pmyoutDX = &myoutDX;
  67         unsigned short myoutDI = 6, *pmyoutDI = &myoutDI;
  68         unsigned short myoutSI = 7, *pmyoutSI = &myoutSI;
  69         unsigned short usSmapiOK = -EIO, *pusSmapiOK = &usSmapiOK;
  70         unsigned int inBXCX = (inBX << 16) | inCX;
  71         unsigned int inDISI = (inDI << 16) | inSI;
  72         int retval = 0;
  73
  74         PRINTK_5(TRACE_SMAPI, "inBX %x inCX %x inDI %x inSI %x\n",
  75                 inBX, inCX, inDI, inSI);
  76
  77         __asm__ __volatile__("movw  $0x5380,%%ax\n\t"
  78                             "movl  %7,%%ebx\n\t"
  79                             "shrl  $16, %%ebx\n\t"
  80                             "movw  %7,%%cx\n\t"
  81                             "movl  %8,%%edi\n\t"
  82                             "shrl  $16,%%edi\n\t"
  83                             "movw  %8,%%si\n\t"
  84                             "movw  %9,%%dx\n\t"
  85                             "out   %%al,%%dx\n\t"
  86                             "out   %%al,$0x4F\n\t"
  87                             "cmpb  $0x53,%%ah\n\t"
  88                             "je    2f\n\t"
  89                             "1:\n\t"
  90                             "orb   %%ah,%%ah\n\t"
  91                             "jnz   2f\n\t"
  92                             "movw  %%ax,%0\n\t"
  93                             "movw  %%bx,%1\n\t"
  94                             "movw  %%cx,%2\n\t"
  95                             "movw  %%dx,%3\n\t"
  96                             "movw  %%di,%4\n\t"
  97                             "movw  %%si,%5\n\t"
  98                             "movw  $1,%6\n\t"
  99                             "2:\n\t":"=m"(*(unsigned short *) pmyoutAX),
 100                             "=m"(*(unsigned short *) pmyoutBX),
 101                             "=m"(*(unsigned short *) pmyoutCX),
 102                             "=m"(*(unsigned short *) pmyoutDX),
 103                             "=m"(*(unsigned short *) pmyoutDI),
 104                             "=m"(*(unsigned short *) pmyoutSI),
 105                             "=m"(*(unsigned short *) pusSmapiOK)
 106                             :"m"(inBXCX), "m"(inDISI), "m"(g_usSmapiPort)
 107                             :"%eax", "%ebx", "%ecx", "%edx", "%edi",
 108                             "%esi");
 109
 110         PRINTK_8(TRACE_SMAPI,
 111                 "myoutAX %x myoutBX %x myoutCX %x myoutDX %x myoutDI %x myoutSI %x usSmapiOK %x\n",
 112                 myoutAX, myoutBX, myoutCX, myoutDX, myoutDI, myoutSI,
 113                 usSmapiOK);
 114         *outAX = myoutAX;
 115         *outBX = myoutBX;
 116         *outCX = myoutCX;
 117         *outDX = myoutDX;
 118         *outDI = myoutDI;
 119         *outSI = myoutSI;
 120
 121         retval = (usSmapiOK == 1) ? 0 : -EIO;
 122         PRINTK_2(TRACE_SMAPI, "smapi::smapi_request exit retval %x\n", retval);
 123         return retval;
 124 }
 125
 126
 127 int smapi_query_DSP_cfg(SMAPI_DSP_SETTINGS * pSettings)
 128 {
 129         int bRC = -EIO;
 130         unsigned short usAX, usBX, usCX, usDX, usDI, usSI;
 131         static const unsigned short ausDspBases[] = {
 132                 0x0030, 0x4E30, 0x8E30, 0xCE30,
 133                 0x0130, 0x0350, 0x0070, 0x0DB0 };
 134         static const unsigned short ausUartBases[] = {
 135                 0x03F8, 0x02F8, 0x03E8, 0x02E8 };
 136
 137         PRINTK_1(TRACE_SMAPI, "smapi::smapi_query_DSP_cfg entry\n");
 138
 139         bRC = smapi_request(0x1802, 0x0000, 0, 0,
 140                 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
 141         if (bRC) {
 142                 PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_query_DSP_cfg: Error: Could not get DSP Settings. Aborting.\n");
 143                 return bRC;
 144         }
 145
 146         PRINTK_1(TRACE_SMAPI, "smapi::smapi_query_DSP_cfg, smapi_request OK\n");
 147
 148         pSettings->bDSPPresent = ((usBX & 0x0100) != 0);
 149         pSettings->bDSPEnabled = ((usCX & 0x0001) != 0);
 150         pSettings->usDspIRQ = usSI & 0x00FF;
 151         pSettings->usDspDMA = (usSI & 0xFF00) >> 8;
 152         if ((usDI & 0x00FF) < ARRAY_SIZE(ausDspBases)) {
 153                 pSettings->usDspBaseIO = ausDspBases[usDI & 0x00FF];
 154         } else {
 155                 pSettings->usDspBaseIO = 0;
 156         }
 157         PRINTK_6(TRACE_SMAPI,
 158                 "smapi::smapi_query_DSP_cfg get DSP Settings bDSPPresent %x bDSPEnabled %x usDspIRQ %x usDspDMA %x usDspBaseIO %x\n",
 159                 pSettings->bDSPPresent, pSettings->bDSPEnabled,
 160                 pSettings->usDspIRQ, pSettings->usDspDMA,
 161                 pSettings->usDspBaseIO);
 162
 163         /* check for illegal values */
 164         if ( pSettings->usDspBaseIO == 0 )
 165                 PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_query_DSP_cfg: Worry: DSP base I/O address is 0\n");
 166         if ( pSettings->usDspIRQ == 0 )
 167                 PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_query_DSP_cfg: Worry: DSP IRQ line is 0\n");
 168
 169         bRC = smapi_request(0x1804, 0x0000, 0, 0,
 170                 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
 171         if (bRC) {
 172                 PRINTK_ERROR("smapi::smapi_query_DSP_cfg: Error: Could not get DSP modem settings. Aborting.\n");
 173                 return bRC;
 174         }
 175
 176         PRINTK_1(TRACE_SMAPI, "smapi::smapi_query_DSP_cfg, smapi_request OK\n");
 177
 178         pSettings->bModemEnabled = ((usCX & 0x0001) != 0);
 179         pSettings->usUartIRQ = usSI & 0x000F;
 180         if (((usSI & 0xFF00) >> 8) < ARRAY_SIZE(ausUartBases)) {
 181                 pSettings->usUartBaseIO = ausUartBases[(usSI & 0xFF00) >> 8];
 182         } else {
 183                 pSettings->usUartBaseIO = 0;
 184         }
 185
 186         PRINTK_4(TRACE_SMAPI,
 187                 "smapi::smapi_query_DSP_cfg get DSP modem settings bModemEnabled %x usUartIRQ %x usUartBaseIO %x\n",
 188                 pSettings->bModemEnabled,
 189                 pSettings->usUartIRQ,
 190                 pSettings->usUartBaseIO);
 191
 192         /* check for illegal values */
 193         if ( pSettings->usUartBaseIO == 0 )
 194                 PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_query_DSP_cfg: Worry: UART base I/O address is 0\n");
 195         if ( pSettings->usUartIRQ == 0 )
 196                 PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_query_DSP_cfg: Worry: UART IRQ line is 0\n");
 197
 198         PRINTK_2(TRACE_SMAPI, "smapi::smapi_query_DSP_cfg exit bRC %x\n", bRC);
 199
 200         return bRC;
 201 }
 202
 203
 204 int smapi_set_DSP_cfg(void)
 205 {
 206         int bRC = -EIO;
 207         int i;
 208         unsigned short usAX, usBX, usCX, usDX, usDI, usSI;
 209         static const unsigned short ausDspBases[] = {
 210                 0x0030, 0x4E30, 0x8E30, 0xCE30,
 211                 0x0130, 0x0350, 0x0070, 0x0DB0 };
 212         static const unsigned short ausUartBases[] = {
 213                 0x03F8, 0x02F8, 0x03E8, 0x02E8 };
 214         static const unsigned short ausDspIrqs[] = {
 215                 5, 7, 10, 11, 15 };
 216         static const unsigned short ausUartIrqs[] = {
 217                 3, 4 };
 218
 219         unsigned short dspio_index = 0, uartio_index = 0;
 220
 221         PRINTK_5(TRACE_SMAPI,
 222                 "smapi::smapi_set_DSP_cfg entry mwave_3780i_irq %x mwave_3780i_io %x mwave_uart_irq %x mwave_uart_io %x\n",
 223                 mwave_3780i_irq, mwave_3780i_io, mwave_uart_irq, mwave_uart_io);
 224
 225         if (mwave_3780i_io) {
 226                 for (i = 0; i < ARRAY_SIZE(ausDspBases); i++) {
 227                         if (mwave_3780i_io == ausDspBases[i])
 228                                 break;
 229                 }
 230                 if (i == ARRAY_SIZE(ausDspBases)) {
 231                         PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_set_DSP_cfg: Error: Invalid mwave_3780i_io address %x. Aborting.\n", mwave_3780i_io);
 232                         return bRC;
 233                 }
 234                 dspio_index = i;
 235         }
 236
 237         if (mwave_3780i_irq) {
 238                 for (i = 0; i < ARRAY_SIZE(ausDspIrqs); i++) {
 239                         if (mwave_3780i_irq == ausDspIrqs[i])
 240                                 break;
 241                 }
 242                 if (i == ARRAY_SIZE(ausDspIrqs)) {
 243                         PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_set_DSP_cfg: Error: Invalid mwave_3780i_irq %x. Aborting.\n", mwave_3780i_irq);
 244                         return bRC;
 245                 }
 246         }
 247
 248         if (mwave_uart_io) {
 249                 for (i = 0; i < ARRAY_SIZE(ausUartBases); i++) {
 250                         if (mwave_uart_io == ausUartBases[i])
 251                                 break;
 252                 }
 253                 if (i == ARRAY_SIZE(ausUartBases)) {
 254                         PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_set_DSP_cfg: Error: Invalid mwave_uart_io address %x. Aborting.\n", mwave_uart_io);
 255                         return bRC;
 256                 }
 257                 uartio_index = i;
 258         }
 259
 260
 261         if (mwave_uart_irq) {
 262                 for (i = 0; i < ARRAY_SIZE(ausUartIrqs); i++) {
 263                         if (mwave_uart_irq == ausUartIrqs[i])
 264                                 break;
 265                 }
 266                 if (i == ARRAY_SIZE(ausUartIrqs)) {
 267                         PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_set_DSP_cfg: Error: Invalid mwave_uart_irq %x. Aborting.\n", mwave_uart_irq);
 268                         return bRC;
 269                 }
 270         }
 271
 272         if (mwave_uart_irq || mwave_uart_io) {
 273
 274                 /* Check serial port A */
 275                 bRC = smapi_request(0x1402, 0x0000, 0, 0,
 276                         &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
 277                 if (bRC) goto exit_smapi_request_error;
 278                 /* bRC == 0 */
 279                 if (usBX & 0x0100) {    /* serial port A is present */
 280                         if (usCX & 1) { /* serial port is enabled */
 281                                 if ((usSI & 0xFF) == mwave_uart_irq) {
 282 #ifndef MWAVE_FUTZ_WITH_OTHER_DEVICES
 283                                         PRINTK_ERROR(KERN_ERR_MWAVE
 284                                                 "smapi::smapi_set_DSP_cfg: Serial port A irq %x conflicts with mwave_uart_irq %x\n", usSI & 0xFF, mwave_uart_irq);
 285 #else
 286                                         PRINTK_3(TRACE_SMAPI,
 287                                                 "smapi::smapi_set_DSP_cfg: Serial port A irq %x conflicts with mwave_uart_irq %x\n", usSI & 0xFF, mwave_uart_irq);
 288 #endif
 289 #ifdef MWAVE_FUTZ_WITH_OTHER_DEVICES
 290                                         PRINTK_1(TRACE_SMAPI,
 291                                                 "smapi::smapi_set_DSP_cfg Disabling conflicting serial port\n");
 292                                         bRC = smapi_request(0x1403, 0x0100, 0, usSI,
 293                                                 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
 294                                         if (bRC) goto exit_smapi_request_error;
 295                                         bRC = smapi_request(0x1402, 0x0000, 0, 0,
 296                                                 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
 297                                         if (bRC) goto exit_smapi_request_error;
 298 #else
 299                                         goto exit_conflict;
 300 #endif
 301                                 } else {
 302                                         if ((usSI >> 8) == uartio_index) {
 303 #ifndef MWAVE_FUTZ_WITH_OTHER_DEVICES
 304                                                 PRINTK_ERROR(KERN_ERR_MWAVE
 305                                                         "smapi::smapi_set_DSP_cfg: Serial port A base I/O address %x conflicts with mwave uart I/O %x\n", ausUartBases[usSI >> 8], ausUartBases[uartio_index]);
 306 #else
 307                                                 PRINTK_3(TRACE_SMAPI,
 308                                                         "smapi::smapi_set_DSP_cfg: Serial port A base I/O address %x conflicts with mwave uart I/O %x\n", ausUartBases[usSI >> 8], ausUartBases[uartio_index]);
 309 #endif
 310 #ifdef MWAVE_FUTZ_WITH_OTHER_DEVICES
 311                                                 PRINTK_1(TRACE_SMAPI,
 312                                                         "smapi::smapi_set_DSP_cfg Disabling conflicting serial port A\n");
 313                                                 bRC = smapi_request (0x1403, 0x0100, 0, usSI,
 314                                                         &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
 315                                                 if (bRC) goto exit_smapi_request_error;
 316                                                 bRC = smapi_request (0x1402, 0x0000, 0, 0,
 317                                                         &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
 318                                                 if (bRC) goto exit_smapi_request_error;
 319 #else
 320                                                 goto exit_conflict;
 321 #endif
 322                                         }
 323                                 }
 324                         }
 325                 }
 326
 327                 /* Check serial port B */
 328                 bRC = smapi_request(0x1404, 0x0000, 0, 0,
 329                         &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
 330                 if (bRC) goto exit_smapi_request_error;
 331                 /* bRC == 0 */
 332                 if (usBX & 0x0100) {    /* serial port B is present */
 333                         if (usCX & 1) { /* serial port is enabled */
 334                                 if ((usSI & 0xFF) == mwave_uart_irq) {
 335 #ifndef MWAVE_FUTZ_WITH_OTHER_DEVICES
 336                                         PRINTK_ERROR(KERN_ERR_MWAVE
 337                                                 "smapi::smapi_set_DSP_cfg: Serial port B irq %x conflicts with mwave_uart_irq %x\n", usSI & 0xFF, mwave_uart_irq);
 338 #else
 339                                         PRINTK_3(TRACE_SMAPI,
 340                                                 "smapi::smapi_set_DSP_cfg: Serial port B irq %x conflicts with mwave_uart_irq %x\n", usSI & 0xFF, mwave_uart_irq);
 341 #endif
 342 #ifdef MWAVE_FUTZ_WITH_OTHER_DEVICES
 343                                         PRINTK_1(TRACE_SMAPI,
 344                                                 "smapi::smapi_set_DSP_cfg Disabling conflicting serial port B\n");
 345                                         bRC = smapi_request(0x1405, 0x0100, 0, usSI,
 346                                                 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
 347                                         if (bRC) goto exit_smapi_request_error;
 348                                         bRC = smapi_request(0x1404, 0x0000, 0, 0,
 349                                                 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
 350                                         if (bRC) goto exit_smapi_request_error;
 351 #else
 352                                         goto exit_conflict;
 353 #endif
 354                                 } else {
 355                                         if ((usSI >> 8) == uartio_index) {
 356 #ifndef MWAVE_FUTZ_WITH_OTHER_DEVICES
 357                                                 PRINTK_ERROR(KERN_ERR_MWAVE
 358                                                         "smapi::smapi_set_DSP_cfg: Serial port B base I/O address %x conflicts with mwave uart I/O %x\n", ausUartBases[usSI >> 8], ausUartBases[uartio_index]);
 359 #else
 360                                                 PRINTK_3(TRACE_SMAPI,
 361                                                         "smapi::smapi_set_DSP_cfg: Serial port B base I/O address %x conflicts with mwave uart I/O %x\n", ausUartBases[usSI >> 8], ausUartBases[uartio_index]);
 362 #endif
 363 #ifdef MWAVE_FUTZ_WITH_OTHER_DEVICES
 364                                                 PRINTK_1 (TRACE_SMAPI,
 365                                                     "smapi::smapi_set_DSP_cfg Disabling conflicting serial port B\n");
 366                                                 bRC = smapi_request (0x1405, 0x0100, 0, usSI,
 367                                                         &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
 368                                                 if (bRC) goto exit_smapi_request_error;
 369                                                 bRC = smapi_request (0x1404, 0x0000, 0, 0,
 370                                                         &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
 371                                                 if (bRC) goto exit_smapi_request_error;
 372 #else
 373                                                 goto exit_conflict;
 374 #endif
 375                                         }
 376                                 }
 377                         }
 378                 }
 379
 380                 /* Check IR port */
 381                 bRC = smapi_request(0x1700, 0x0000, 0, 0,
 382                         &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
 383                 if (bRC) goto exit_smapi_request_error;
 384                 bRC = smapi_request(0x1704, 0x0000, 0, 0,
 385                         &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
 386                 if (bRC) goto exit_smapi_request_error;
 387                 /* bRC == 0 */
 388                 if ((usCX & 0xff) != 0xff) { /* IR port not disabled */
 389                         if ((usCX & 0xff) == mwave_uart_irq) {
 390 #ifndef MWAVE_FUTZ_WITH_OTHER_DEVICES
 391                                 PRINTK_ERROR(KERN_ERR_MWAVE
 392                                         "smapi::smapi_set_DSP_cfg: IR port irq %x conflicts with mwave_uart_irq %x\n", usCX & 0xff, mwave_uart_irq);
 393 #else
 394                                 PRINTK_3(TRACE_SMAPI,
 395                                         "smapi::smapi_set_DSP_cfg: IR port irq %x conflicts with mwave_uart_irq %x\n", usCX & 0xff, mwave_uart_irq);
 396 #endif
 397 #ifdef MWAVE_FUTZ_WITH_OTHER_DEVICES
 398                                 PRINTK_1(TRACE_SMAPI,
 399                                         "smapi::smapi_set_DSP_cfg Disabling conflicting IR port\n");
 400                                 bRC = smapi_request(0x1701, 0x0100, 0, 0,
 401                                         &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
 402                                 if (bRC) goto exit_smapi_request_error;
 403                                 bRC = smapi_request(0x1700, 0, 0, 0,
 404                                         &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
 405                                 if (bRC) goto exit_smapi_request_error;
 406                                 bRC = smapi_request(0x1705, 0x01ff, 0, usSI,
 407                                         &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
 408                                 if (bRC) goto exit_smapi_request_error;
 409                                 bRC = smapi_request(0x1704, 0x0000, 0, 0,
 410                                         &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
 411                                 if (bRC) goto exit_smapi_request_error;
 412 #else
 413                                 goto exit_conflict;
 414 #endif
 415                         } else {
 416                                 if ((usSI & 0xff) == uartio_index) {
 417 #ifndef MWAVE_FUTZ_WITH_OTHER_DEVICES
 418                                         PRINTK_ERROR(KERN_ERR_MWAVE
 419                                                 "smapi::smapi_set_DSP_cfg: IR port base I/O address %x conflicts with mwave uart I/O %x\n", ausUartBases[usSI & 0xff], ausUartBases[uartio_index]);
 420 #else
 421                                         PRINTK_3(TRACE_SMAPI,
 422                                                 "smapi::smapi_set_DSP_cfg: IR port base I/O address %x conflicts with mwave uart I/O %x\n", ausUartBases[usSI & 0xff], ausUartBases[uartio_index]);
 423 #endif
 424 #ifdef MWAVE_FUTZ_WITH_OTHER_DEVICES
 425                                         PRINTK_1(TRACE_SMAPI,
 426                                                 "smapi::smapi_set_DSP_cfg Disabling conflicting IR port\n");
 427                                         bRC = smapi_request(0x1701, 0x0100, 0, 0,
 428                                                 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
 429                                         if (bRC) goto exit_smapi_request_error;
 430                                         bRC = smapi_request(0x1700, 0, 0, 0,
 431                                                 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
 432                                         if (bRC) goto exit_smapi_request_error;
 433                                         bRC = smapi_request(0x1705, 0x01ff, 0, usSI,
 434                                                 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
 435                                         if (bRC) goto exit_smapi_request_error;
 436                                         bRC = smapi_request(0x1704, 0x0000, 0, 0,
 437                                                 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
 438                                         if (bRC) goto exit_smapi_request_error;
 439 #else
 440                                         goto exit_conflict;
 441 #endif
 442                                 }
 443                         }
 444                 }
 445         }
 446
 447         bRC = smapi_request(0x1802, 0x0000, 0, 0,
 448                 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
 449         if (bRC) goto exit_smapi_request_error;
 450
 451         if (mwave_3780i_io) {
 452                 usDI = dspio_index;
 453         }
 454         if (mwave_3780i_irq) {
 455                 usSI = (usSI & 0xff00) | mwave_3780i_irq;
 456         }
 457
 458         bRC = smapi_request(0x1803, 0x0101, usDI, usSI,
 459                 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
 460         if (bRC) goto exit_smapi_request_error;
 461
 462         bRC = smapi_request(0x1804, 0x0000, 0, 0,
 463                 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
 464         if (bRC) goto exit_smapi_request_error;
 465
 466         if (mwave_uart_io) {
 467                 usSI = (usSI & 0x00ff) | (uartio_index << 8);
 468         }
 469         if (mwave_uart_irq) {
 470                 usSI = (usSI & 0xff00) | mwave_uart_irq;
 471         }
 472         bRC = smapi_request(0x1805, 0x0101, 0, usSI,
 473                 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
 474         if (bRC) goto exit_smapi_request_error;
 475
 476         bRC = smapi_request(0x1802, 0x0000, 0, 0,
 477                 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
 478         if (bRC) goto exit_smapi_request_error;
 479
 480         bRC = smapi_request(0x1804, 0x0000, 0, 0,
 481                 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
 482         if (bRC) goto exit_smapi_request_error;
 483
 484 /* normal exit: */
 485         PRINTK_1(TRACE_SMAPI, "smapi::smapi_set_DSP_cfg exit\n");
 486         return 0;
 487
 488 exit_conflict:
 489         /* Message has already been printed */
 490         return -EIO;
 491
 492 exit_smapi_request_error:
 493         PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_set_DSP_cfg exit on smapi_request error bRC %x\n", bRC);
 494         return bRC;
 495 }
 496
 497
 498 int smapi_set_DSP_power_state(bool bOn)
 499 {
 500         int bRC = -EIO;
 501         unsigned short usAX, usBX, usCX, usDX, usDI, usSI;
 502         unsigned short usPowerFunction;
 503
 504         PRINTK_2(TRACE_SMAPI, "smapi::smapi_set_DSP_power_state entry bOn %x\n", bOn);
 505
 506         usPowerFunction = (bOn) ? 1 : 0;
 507
 508         bRC = smapi_request(0x4901, 0x0000, 0, usPowerFunction,
 509                 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
 510
 511         PRINTK_2(TRACE_SMAPI, "smapi::smapi_set_DSP_power_state exit bRC %x\n", bRC);
 512
 513         return bRC;
 514 }
 515
 516 #if 0
 517 static int SmapiQuerySystemID(void)
 518 {
 519         int bRC = -EIO;
 520         unsigned short usAX = 0xffff, usBX = 0xffff, usCX = 0xffff,
 521                 usDX = 0xffff, usDI = 0xffff, usSI = 0xffff;
 522
 523         printk("smapi::SmapiQUerySystemID entry\n");
 524         bRC = smapi_request(0x0000, 0, 0, 0,
 525                 &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
 526
 527         if (bRC == 0) {
 528                 printk("AX=%x, BX=%x, CX=%x, DX=%x, DI=%x, SI=%x\n",
 529                         usAX, usBX, usCX, usDX, usDI, usSI);
 530         } else {
 531                 printk("smapi::SmapiQuerySystemID smapi_request error\n");
 532         }
 533
 534         return bRC;
 535 }
 536 #endif  /*  0  */
 537
 538 int smapi_init(void)
 539 {
 540         int retval = -EIO;
 541         unsigned short usSmapiID = 0;
 542         unsigned long flags;
 543
 544         PRINTK_1(TRACE_SMAPI, "smapi::smapi_init entry\n");
 545
 546         spin_lock_irqsave(&rtc_lock, flags);
 547         usSmapiID = CMOS_READ(0x7C);
 548         usSmapiID |= (CMOS_READ(0x7D) << 8);
 549         spin_unlock_irqrestore(&rtc_lock, flags);
 550         PRINTK_2(TRACE_SMAPI, "smapi::smapi_init usSmapiID %x\n", usSmapiID);
 551
 552         if (usSmapiID == 0x5349) {
 553                 spin_lock_irqsave(&rtc_lock, flags);
 554                 g_usSmapiPort = CMOS_READ(0x7E);
 555                 g_usSmapiPort |= (CMOS_READ(0x7F) << 8);
 556                 spin_unlock_irqrestore(&rtc_lock, flags);
 557                 if (g_usSmapiPort == 0) {
 558                         PRINTK_ERROR("smapi::smapi_init, ERROR unable to read from SMAPI port\n");
 559                 } else {
 560                         PRINTK_2(TRACE_SMAPI,
 561                                 "smapi::smapi_init, exit true g_usSmapiPort %x\n",
 562                                 g_usSmapiPort);
 563                         retval = 0;
 564                         //SmapiQuerySystemID();
 565                 }
 566         } else {
 567                 PRINTK_ERROR("smapi::smapi_init, ERROR invalid usSmapiID\n");
 568                 retval = -ENXIO;
 569         }
 570
 571         return retval;
 572 }