Linux-libre 5.0.14-gnu
[librecmc/linux-libre.git] / arch / unicore32 / kernel / gpio.c
1 /*
2  * linux/arch/unicore32/kernel/gpio.c
3  *
4  * Code specific to PKUnity SoC and UniCore ISA
5  *
6  *      Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
7  *      Copyright (C) 2001-2010 Guan Xuetao
8  *
9  * This program is free software; you can redistribute it and/or modify
10  * it under the terms of the GNU General Public License version 2 as
11  * published by the Free Software Foundation.
12  */
13 /* in FPGA, no GPIO support */
14
15 #include <linux/init.h>
16 #include <linux/module.h>
17 #include <linux/gpio/driver.h>
18 /* FIXME: needed for gpio_set_value() - convert to use descriptors or hogs */
19 #include <linux/gpio.h>
20 #include <mach/hardware.h>
21
22 #ifdef CONFIG_LEDS
23 #include <linux/leds.h>
24 #include <linux/platform_device.h>
25
26 static const struct gpio_led puv3_gpio_leds[] = {
27         { .name = "cpuhealth", .gpio = GPO_CPU_HEALTH, .active_low = 0,
28                 .default_trigger = "heartbeat", },
29         { .name = "hdd_led", .gpio = GPO_HDD_LED, .active_low = 1,
30                 .default_trigger = "disk-activity", },
31 };
32
33 static const struct gpio_led_platform_data puv3_gpio_led_data = {
34         .num_leds =     ARRAY_SIZE(puv3_gpio_leds),
35         .leds =         (void *) puv3_gpio_leds,
36 };
37
38 static struct platform_device puv3_gpio_gpio_leds = {
39         .name =         "leds-gpio",
40         .id =           -1,
41         .dev = {
42                 .platform_data = (void *) &puv3_gpio_led_data,
43         }
44 };
45
46 static int __init puv3_gpio_leds_init(void)
47 {
48         platform_device_register(&puv3_gpio_gpio_leds);
49         return 0;
50 }
51
52 device_initcall(puv3_gpio_leds_init);
53 #endif
54
55 static int puv3_gpio_get(struct gpio_chip *chip, unsigned offset)
56 {
57         return !!(readl(GPIO_GPLR) & GPIO_GPIO(offset));
58 }
59
60 static void puv3_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
61 {
62         if (value)
63                 writel(GPIO_GPIO(offset), GPIO_GPSR);
64         else
65                 writel(GPIO_GPIO(offset), GPIO_GPCR);
66 }
67
68 static int puv3_direction_input(struct gpio_chip *chip, unsigned offset)
69 {
70         unsigned long flags;
71
72         local_irq_save(flags);
73         writel(readl(GPIO_GPDR) & ~GPIO_GPIO(offset), GPIO_GPDR);
74         local_irq_restore(flags);
75         return 0;
76 }
77
78 static int puv3_direction_output(struct gpio_chip *chip, unsigned offset,
79                 int value)
80 {
81         unsigned long flags;
82
83         local_irq_save(flags);
84         puv3_gpio_set(chip, offset, value);
85         writel(readl(GPIO_GPDR) | GPIO_GPIO(offset), GPIO_GPDR);
86         local_irq_restore(flags);
87         return 0;
88 }
89
90 static struct gpio_chip puv3_gpio_chip = {
91         .label                  = "gpio",
92         .direction_input        = puv3_direction_input,
93         .direction_output       = puv3_direction_output,
94         .set                    = puv3_gpio_set,
95         .get                    = puv3_gpio_get,
96         .base                   = 0,
97         .ngpio                  = GPIO_MAX + 1,
98 };
99
100 void __init puv3_init_gpio(void)
101 {
102         writel(GPIO_DIR, GPIO_GPDR);
103 #if     defined(CONFIG_PUV3_NB0916) || defined(CONFIG_PUV3_SMW0919)     \
104         || defined(CONFIG_PUV3_DB0913)
105         gpio_set_value(GPO_WIFI_EN, 1);
106         gpio_set_value(GPO_HDD_LED, 1);
107         gpio_set_value(GPO_VGA_EN, 1);
108         gpio_set_value(GPO_LCD_EN, 1);
109         gpio_set_value(GPO_CAM_PWR_EN, 0);
110         gpio_set_value(GPO_LCD_VCC_EN, 1);
111         gpio_set_value(GPO_SOFT_OFF, 1);
112         gpio_set_value(GPO_BT_EN, 1);
113         gpio_set_value(GPO_FAN_ON, 0);
114         gpio_set_value(GPO_SPKR, 0);
115         gpio_set_value(GPO_CPU_HEALTH, 1);
116         gpio_set_value(GPO_LAN_SEL, 1);
117 /*
118  * DO NOT modify the GPO_SET_V1 and GPO_SET_V2 in kernel
119  *      gpio_set_value(GPO_SET_V1, 1);
120  *      gpio_set_value(GPO_SET_V2, 1);
121  */
122 #endif
123         gpiochip_add_data(&puv3_gpio_chip, NULL);
124 }