Linux-libre 4.14.12-gnu
[librecmc/linux-libre.git] / arch / powerpc / include / asm / cpm1.h
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  * MPC8xx Communication Processor Module.
4  * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
5  *
6  * This file contains structures and information for the communication
7  * processor channels.  Some CPM control and status is available
8  * through the MPC8xx internal memory map.  See immap.h for details.
9  * This file only contains what I need for the moment, not the total
10  * CPM capabilities.  I (or someone else) will add definitions as they
11  * are needed.  -- Dan
12  *
13  * On the MBX board, EPPC-Bug loads CPM microcode into the first 512
14  * bytes of the DP RAM and relocates the I2C parameter area to the
15  * IDMA1 space.  The remaining DP RAM is available for buffer descriptors
16  * or other use.
17  */
18 #ifndef __CPM1__
19 #define __CPM1__
20
21 #include <linux/init.h>
22 #include <asm/8xx_immap.h>
23 #include <asm/ptrace.h>
24 #include <asm/cpm.h>
25
26 /* CPM Command register.
27 */
28 #define CPM_CR_RST      ((ushort)0x8000)
29 #define CPM_CR_OPCODE   ((ushort)0x0f00)
30 #define CPM_CR_CHAN     ((ushort)0x00f0)
31 #define CPM_CR_FLG      ((ushort)0x0001)
32
33 /* Channel numbers.
34 */
35 #define CPM_CR_CH_SCC1          ((ushort)0x0000)
36 #define CPM_CR_CH_I2C           ((ushort)0x0001)        /* I2C and IDMA1 */
37 #define CPM_CR_CH_SCC2          ((ushort)0x0004)
38 #define CPM_CR_CH_SPI           ((ushort)0x0005)        /* SPI / IDMA2 / Timers */
39 #define CPM_CR_CH_TIMER         CPM_CR_CH_SPI
40 #define CPM_CR_CH_SCC3          ((ushort)0x0008)
41 #define CPM_CR_CH_SMC1          ((ushort)0x0009)        /* SMC1 / DSP1 */
42 #define CPM_CR_CH_SCC4          ((ushort)0x000c)
43 #define CPM_CR_CH_SMC2          ((ushort)0x000d)        /* SMC2 / DSP2 */
44
45 #define mk_cr_cmd(CH, CMD)      ((CMD << 8) | (CH << 4))
46
47 /* Export the base address of the communication processor registers
48  * and dual port ram.
49  */
50 extern cpm8xx_t __iomem *cpmp; /* Pointer to comm processor */
51
52 #define cpm_dpalloc cpm_muram_alloc
53 #define cpm_dpfree cpm_muram_free
54 #define cpm_dpram_addr cpm_muram_addr
55 #define cpm_dpram_phys cpm_muram_dma
56
57 extern void cpm_setbrg(uint brg, uint rate);
58
59 extern void __init cpm_load_patch(cpm8xx_t *cp);
60
61 extern void cpm_reset(void);
62
63 /* Parameter RAM offsets.
64 */
65 #define PROFF_SCC1      ((uint)0x0000)
66 #define PROFF_IIC       ((uint)0x0080)
67 #define PROFF_SCC2      ((uint)0x0100)
68 #define PROFF_SPI       ((uint)0x0180)
69 #define PROFF_SCC3      ((uint)0x0200)
70 #define PROFF_SMC1      ((uint)0x0280)
71 #define PROFF_SCC4      ((uint)0x0300)
72 #define PROFF_SMC2      ((uint)0x0380)
73
74 /* Define enough so I can at least use the serial port as a UART.
75  * The MBX uses SMC1 as the host serial port.
76  */
77 typedef struct smc_uart {
78         ushort  smc_rbase;      /* Rx Buffer descriptor base address */
79         ushort  smc_tbase;      /* Tx Buffer descriptor base address */
80         u_char  smc_rfcr;       /* Rx function code */
81         u_char  smc_tfcr;       /* Tx function code */
82         ushort  smc_mrblr;      /* Max receive buffer length */
83         uint    smc_rstate;     /* Internal */
84         uint    smc_idp;        /* Internal */
85         ushort  smc_rbptr;      /* Internal */
86         ushort  smc_ibc;        /* Internal */
87         uint    smc_rxtmp;      /* Internal */
88         uint    smc_tstate;     /* Internal */
89         uint    smc_tdp;        /* Internal */
90         ushort  smc_tbptr;      /* Internal */
91         ushort  smc_tbc;        /* Internal */
92         uint    smc_txtmp;      /* Internal */
93         ushort  smc_maxidl;     /* Maximum idle characters */
94         ushort  smc_tmpidl;     /* Temporary idle counter */
95         ushort  smc_brklen;     /* Last received break length */
96         ushort  smc_brkec;      /* rcv'd break condition counter */
97         ushort  smc_brkcr;      /* xmt break count register */
98         ushort  smc_rmask;      /* Temporary bit mask */
99         char    res1[8];        /* Reserved */
100         ushort  smc_rpbase;     /* Relocation pointer */
101 } smc_uart_t;
102
103 /* Function code bits.
104 */
105 #define SMC_EB  ((u_char)0x10)  /* Set big endian byte order */
106
107 /* SMC uart mode register.
108 */
109 #define SMCMR_REN       ((ushort)0x0001)
110 #define SMCMR_TEN       ((ushort)0x0002)
111 #define SMCMR_DM        ((ushort)0x000c)
112 #define SMCMR_SM_GCI    ((ushort)0x0000)
113 #define SMCMR_SM_UART   ((ushort)0x0020)
114 #define SMCMR_SM_TRANS  ((ushort)0x0030)
115 #define SMCMR_SM_MASK   ((ushort)0x0030)
116 #define SMCMR_PM_EVEN   ((ushort)0x0100)        /* Even parity, else odd */
117 #define SMCMR_REVD      SMCMR_PM_EVEN
118 #define SMCMR_PEN       ((ushort)0x0200)        /* Parity enable */
119 #define SMCMR_BS        SMCMR_PEN
120 #define SMCMR_SL        ((ushort)0x0400)        /* Two stops, else one */
121 #define SMCR_CLEN_MASK  ((ushort)0x7800)        /* Character length */
122 #define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK)
123
124 /* SMC2 as Centronics parallel printer.  It is half duplex, in that
125  * it can only receive or transmit.  The parameter ram values for
126  * each direction are either unique or properly overlap, so we can
127  * include them in one structure.
128  */
129 typedef struct smc_centronics {
130         ushort  scent_rbase;
131         ushort  scent_tbase;
132         u_char  scent_cfcr;
133         u_char  scent_smask;
134         ushort  scent_mrblr;
135         uint    scent_rstate;
136         uint    scent_r_ptr;
137         ushort  scent_rbptr;
138         ushort  scent_r_cnt;
139         uint    scent_rtemp;
140         uint    scent_tstate;
141         uint    scent_t_ptr;
142         ushort  scent_tbptr;
143         ushort  scent_t_cnt;
144         uint    scent_ttemp;
145         ushort  scent_max_sl;
146         ushort  scent_sl_cnt;
147         ushort  scent_character1;
148         ushort  scent_character2;
149         ushort  scent_character3;
150         ushort  scent_character4;
151         ushort  scent_character5;
152         ushort  scent_character6;
153         ushort  scent_character7;
154         ushort  scent_character8;
155         ushort  scent_rccm;
156         ushort  scent_rccr;
157 } smc_cent_t;
158
159 /* Centronics Status Mask Register.
160 */
161 #define SMC_CENT_F      ((u_char)0x08)
162 #define SMC_CENT_PE     ((u_char)0x04)
163 #define SMC_CENT_S      ((u_char)0x02)
164
165 /* SMC Event and Mask register.
166 */
167 #define SMCM_BRKE       ((unsigned char)0x40)   /* When in UART Mode */
168 #define SMCM_BRK        ((unsigned char)0x10)   /* When in UART Mode */
169 #define SMCM_TXE        ((unsigned char)0x10)   /* When in Transparent Mode */
170 #define SMCM_BSY        ((unsigned char)0x04)
171 #define SMCM_TX         ((unsigned char)0x02)
172 #define SMCM_RX         ((unsigned char)0x01)
173
174 /* Baud rate generators.
175 */
176 #define CPM_BRG_RST             ((uint)0x00020000)
177 #define CPM_BRG_EN              ((uint)0x00010000)
178 #define CPM_BRG_EXTC_INT        ((uint)0x00000000)
179 #define CPM_BRG_EXTC_CLK2       ((uint)0x00004000)
180 #define CPM_BRG_EXTC_CLK6       ((uint)0x00008000)
181 #define CPM_BRG_ATB             ((uint)0x00002000)
182 #define CPM_BRG_CD_MASK         ((uint)0x00001ffe)
183 #define CPM_BRG_DIV16           ((uint)0x00000001)
184
185 /* SI Clock Route Register
186 */
187 #define SICR_RCLK_SCC1_BRG1     ((uint)0x00000000)
188 #define SICR_TCLK_SCC1_BRG1     ((uint)0x00000000)
189 #define SICR_RCLK_SCC2_BRG2     ((uint)0x00000800)
190 #define SICR_TCLK_SCC2_BRG2     ((uint)0x00000100)
191 #define SICR_RCLK_SCC3_BRG3     ((uint)0x00100000)
192 #define SICR_TCLK_SCC3_BRG3     ((uint)0x00020000)
193 #define SICR_RCLK_SCC4_BRG4     ((uint)0x18000000)
194 #define SICR_TCLK_SCC4_BRG4     ((uint)0x03000000)
195
196 /* SCCs.
197 */
198 #define SCC_GSMRH_IRP           ((uint)0x00040000)
199 #define SCC_GSMRH_GDE           ((uint)0x00010000)
200 #define SCC_GSMRH_TCRC_CCITT    ((uint)0x00008000)
201 #define SCC_GSMRH_TCRC_BISYNC   ((uint)0x00004000)
202 #define SCC_GSMRH_TCRC_HDLC     ((uint)0x00000000)
203 #define SCC_GSMRH_REVD          ((uint)0x00002000)
204 #define SCC_GSMRH_TRX           ((uint)0x00001000)
205 #define SCC_GSMRH_TTX           ((uint)0x00000800)
206 #define SCC_GSMRH_CDP           ((uint)0x00000400)
207 #define SCC_GSMRH_CTSP          ((uint)0x00000200)
208 #define SCC_GSMRH_CDS           ((uint)0x00000100)
209 #define SCC_GSMRH_CTSS          ((uint)0x00000080)
210 #define SCC_GSMRH_TFL           ((uint)0x00000040)
211 #define SCC_GSMRH_RFW           ((uint)0x00000020)
212 #define SCC_GSMRH_TXSY          ((uint)0x00000010)
213 #define SCC_GSMRH_SYNL16        ((uint)0x0000000c)
214 #define SCC_GSMRH_SYNL8         ((uint)0x00000008)
215 #define SCC_GSMRH_SYNL4         ((uint)0x00000004)
216 #define SCC_GSMRH_RTSM          ((uint)0x00000002)
217 #define SCC_GSMRH_RSYN          ((uint)0x00000001)
218
219 #define SCC_GSMRL_SIR           ((uint)0x80000000)      /* SCC2 only */
220 #define SCC_GSMRL_EDGE_NONE     ((uint)0x60000000)
221 #define SCC_GSMRL_EDGE_NEG      ((uint)0x40000000)
222 #define SCC_GSMRL_EDGE_POS      ((uint)0x20000000)
223 #define SCC_GSMRL_EDGE_BOTH     ((uint)0x00000000)
224 #define SCC_GSMRL_TCI           ((uint)0x10000000)
225 #define SCC_GSMRL_TSNC_3        ((uint)0x0c000000)
226 #define SCC_GSMRL_TSNC_4        ((uint)0x08000000)
227 #define SCC_GSMRL_TSNC_14       ((uint)0x04000000)
228 #define SCC_GSMRL_TSNC_INF      ((uint)0x00000000)
229 #define SCC_GSMRL_RINV          ((uint)0x02000000)
230 #define SCC_GSMRL_TINV          ((uint)0x01000000)
231 #define SCC_GSMRL_TPL_128       ((uint)0x00c00000)
232 #define SCC_GSMRL_TPL_64        ((uint)0x00a00000)
233 #define SCC_GSMRL_TPL_48        ((uint)0x00800000)
234 #define SCC_GSMRL_TPL_32        ((uint)0x00600000)
235 #define SCC_GSMRL_TPL_16        ((uint)0x00400000)
236 #define SCC_GSMRL_TPL_8         ((uint)0x00200000)
237 #define SCC_GSMRL_TPL_NONE      ((uint)0x00000000)
238 #define SCC_GSMRL_TPP_ALL1      ((uint)0x00180000)
239 #define SCC_GSMRL_TPP_01        ((uint)0x00100000)
240 #define SCC_GSMRL_TPP_10        ((uint)0x00080000)
241 #define SCC_GSMRL_TPP_ZEROS     ((uint)0x00000000)
242 #define SCC_GSMRL_TEND          ((uint)0x00040000)
243 #define SCC_GSMRL_TDCR_32       ((uint)0x00030000)
244 #define SCC_GSMRL_TDCR_16       ((uint)0x00020000)
245 #define SCC_GSMRL_TDCR_8        ((uint)0x00010000)
246 #define SCC_GSMRL_TDCR_1        ((uint)0x00000000)
247 #define SCC_GSMRL_RDCR_32       ((uint)0x0000c000)
248 #define SCC_GSMRL_RDCR_16       ((uint)0x00008000)
249 #define SCC_GSMRL_RDCR_8        ((uint)0x00004000)
250 #define SCC_GSMRL_RDCR_1        ((uint)0x00000000)
251 #define SCC_GSMRL_RENC_DFMAN    ((uint)0x00003000)
252 #define SCC_GSMRL_RENC_MANCH    ((uint)0x00002000)
253 #define SCC_GSMRL_RENC_FM0      ((uint)0x00001000)
254 #define SCC_GSMRL_RENC_NRZI     ((uint)0x00000800)
255 #define SCC_GSMRL_RENC_NRZ      ((uint)0x00000000)
256 #define SCC_GSMRL_TENC_DFMAN    ((uint)0x00000600)
257 #define SCC_GSMRL_TENC_MANCH    ((uint)0x00000400)
258 #define SCC_GSMRL_TENC_FM0      ((uint)0x00000200)
259 #define SCC_GSMRL_TENC_NRZI     ((uint)0x00000100)
260 #define SCC_GSMRL_TENC_NRZ      ((uint)0x00000000)
261 #define SCC_GSMRL_DIAG_LE       ((uint)0x000000c0)      /* Loop and echo */
262 #define SCC_GSMRL_DIAG_ECHO     ((uint)0x00000080)
263 #define SCC_GSMRL_DIAG_LOOP     ((uint)0x00000040)
264 #define SCC_GSMRL_DIAG_NORM     ((uint)0x00000000)
265 #define SCC_GSMRL_ENR           ((uint)0x00000020)
266 #define SCC_GSMRL_ENT           ((uint)0x00000010)
267 #define SCC_GSMRL_MODE_ENET     ((uint)0x0000000c)
268 #define SCC_GSMRL_MODE_QMC      ((uint)0x0000000a)
269 #define SCC_GSMRL_MODE_DDCMP    ((uint)0x00000009)
270 #define SCC_GSMRL_MODE_BISYNC   ((uint)0x00000008)
271 #define SCC_GSMRL_MODE_V14      ((uint)0x00000007)
272 #define SCC_GSMRL_MODE_AHDLC    ((uint)0x00000006)
273 #define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005)
274 #define SCC_GSMRL_MODE_UART     ((uint)0x00000004)
275 #define SCC_GSMRL_MODE_SS7      ((uint)0x00000003)
276 #define SCC_GSMRL_MODE_ATALK    ((uint)0x00000002)
277 #define SCC_GSMRL_MODE_HDLC     ((uint)0x00000000)
278
279 #define SCC_TODR_TOD            ((ushort)0x8000)
280
281 /* SCC Event and Mask register.
282 */
283 #define SCCM_TXE        ((unsigned char)0x10)
284 #define SCCM_BSY        ((unsigned char)0x04)
285 #define SCCM_TX         ((unsigned char)0x02)
286 #define SCCM_RX         ((unsigned char)0x01)
287
288 typedef struct scc_param {
289         ushort  scc_rbase;      /* Rx Buffer descriptor base address */
290         ushort  scc_tbase;      /* Tx Buffer descriptor base address */
291         u_char  scc_rfcr;       /* Rx function code */
292         u_char  scc_tfcr;       /* Tx function code */
293         ushort  scc_mrblr;      /* Max receive buffer length */
294         uint    scc_rstate;     /* Internal */
295         uint    scc_idp;        /* Internal */
296         ushort  scc_rbptr;      /* Internal */
297         ushort  scc_ibc;        /* Internal */
298         uint    scc_rxtmp;      /* Internal */
299         uint    scc_tstate;     /* Internal */
300         uint    scc_tdp;        /* Internal */
301         ushort  scc_tbptr;      /* Internal */
302         ushort  scc_tbc;        /* Internal */
303         uint    scc_txtmp;      /* Internal */
304         uint    scc_rcrc;       /* Internal */
305         uint    scc_tcrc;       /* Internal */
306 } sccp_t;
307
308 /* Function code bits.
309 */
310 #define SCC_EB  ((u_char)0x10)  /* Set big endian byte order */
311
312 /* CPM Ethernet through SCCx.
313  */
314 typedef struct scc_enet {
315         sccp_t  sen_genscc;
316         uint    sen_cpres;      /* Preset CRC */
317         uint    sen_cmask;      /* Constant mask for CRC */
318         uint    sen_crcec;      /* CRC Error counter */
319         uint    sen_alec;       /* alignment error counter */
320         uint    sen_disfc;      /* discard frame counter */
321         ushort  sen_pads;       /* Tx short frame pad character */
322         ushort  sen_retlim;     /* Retry limit threshold */
323         ushort  sen_retcnt;     /* Retry limit counter */
324         ushort  sen_maxflr;     /* maximum frame length register */
325         ushort  sen_minflr;     /* minimum frame length register */
326         ushort  sen_maxd1;      /* maximum DMA1 length */
327         ushort  sen_maxd2;      /* maximum DMA2 length */
328         ushort  sen_maxd;       /* Rx max DMA */
329         ushort  sen_dmacnt;     /* Rx DMA counter */
330         ushort  sen_maxb;       /* Max BD byte count */
331         ushort  sen_gaddr1;     /* Group address filter */
332         ushort  sen_gaddr2;
333         ushort  sen_gaddr3;
334         ushort  sen_gaddr4;
335         uint    sen_tbuf0data0; /* Save area 0 - current frame */
336         uint    sen_tbuf0data1; /* Save area 1 - current frame */
337         uint    sen_tbuf0rba;   /* Internal */
338         uint    sen_tbuf0crc;   /* Internal */
339         ushort  sen_tbuf0bcnt;  /* Internal */
340         ushort  sen_paddrh;     /* physical address (MSB) */
341         ushort  sen_paddrm;
342         ushort  sen_paddrl;     /* physical address (LSB) */
343         ushort  sen_pper;       /* persistence */
344         ushort  sen_rfbdptr;    /* Rx first BD pointer */
345         ushort  sen_tfbdptr;    /* Tx first BD pointer */
346         ushort  sen_tlbdptr;    /* Tx last BD pointer */
347         uint    sen_tbuf1data0; /* Save area 0 - current frame */
348         uint    sen_tbuf1data1; /* Save area 1 - current frame */
349         uint    sen_tbuf1rba;   /* Internal */
350         uint    sen_tbuf1crc;   /* Internal */
351         ushort  sen_tbuf1bcnt;  /* Internal */
352         ushort  sen_txlen;      /* Tx Frame length counter */
353         ushort  sen_iaddr1;     /* Individual address filter */
354         ushort  sen_iaddr2;
355         ushort  sen_iaddr3;
356         ushort  sen_iaddr4;
357         ushort  sen_boffcnt;    /* Backoff counter */
358
359         /* NOTE: Some versions of the manual have the following items
360          * incorrectly documented.  Below is the proper order.
361          */
362         ushort  sen_taddrh;     /* temp address (MSB) */
363         ushort  sen_taddrm;
364         ushort  sen_taddrl;     /* temp address (LSB) */
365 } scc_enet_t;
366
367 /* SCC Event register as used by Ethernet.
368 */
369 #define SCCE_ENET_GRA   ((ushort)0x0080)        /* Graceful stop complete */
370 #define SCCE_ENET_TXE   ((ushort)0x0010)        /* Transmit Error */
371 #define SCCE_ENET_RXF   ((ushort)0x0008)        /* Full frame received */
372 #define SCCE_ENET_BSY   ((ushort)0x0004)        /* All incoming buffers full */
373 #define SCCE_ENET_TXB   ((ushort)0x0002)        /* A buffer was transmitted */
374 #define SCCE_ENET_RXB   ((ushort)0x0001)        /* A buffer was received */
375
376 /* SCC Mode Register (PMSR) as used by Ethernet.
377 */
378 #define SCC_PSMR_HBC    ((ushort)0x8000)        /* Enable heartbeat */
379 #define SCC_PSMR_FC     ((ushort)0x4000)        /* Force collision */
380 #define SCC_PSMR_RSH    ((ushort)0x2000)        /* Receive short frames */
381 #define SCC_PSMR_IAM    ((ushort)0x1000)        /* Check individual hash */
382 #define SCC_PSMR_ENCRC  ((ushort)0x0800)        /* Ethernet CRC mode */
383 #define SCC_PSMR_PRO    ((ushort)0x0200)        /* Promiscuous mode */
384 #define SCC_PSMR_BRO    ((ushort)0x0100)        /* Catch broadcast pkts */
385 #define SCC_PSMR_SBT    ((ushort)0x0080)        /* Special backoff timer */
386 #define SCC_PSMR_LPB    ((ushort)0x0040)        /* Set Loopback mode */
387 #define SCC_PSMR_SIP    ((ushort)0x0020)        /* Sample Input Pins */
388 #define SCC_PSMR_LCW    ((ushort)0x0010)        /* Late collision window */
389 #define SCC_PSMR_NIB22  ((ushort)0x000a)        /* Start frame search */
390 #define SCC_PSMR_FDE    ((ushort)0x0001)        /* Full duplex enable */
391
392 /* SCC as UART
393 */
394 typedef struct scc_uart {
395         sccp_t  scc_genscc;
396         char    res1[8];        /* Reserved */
397         ushort  scc_maxidl;     /* Maximum idle chars */
398         ushort  scc_idlc;       /* temp idle counter */
399         ushort  scc_brkcr;      /* Break count register */
400         ushort  scc_parec;      /* receive parity error counter */
401         ushort  scc_frmec;      /* receive framing error counter */
402         ushort  scc_nosec;      /* receive noise counter */
403         ushort  scc_brkec;      /* receive break condition counter */
404         ushort  scc_brkln;      /* last received break length */
405         ushort  scc_uaddr1;     /* UART address character 1 */
406         ushort  scc_uaddr2;     /* UART address character 2 */
407         ushort  scc_rtemp;      /* Temp storage */
408         ushort  scc_toseq;      /* Transmit out of sequence char */
409         ushort  scc_char1;      /* control character 1 */
410         ushort  scc_char2;      /* control character 2 */
411         ushort  scc_char3;      /* control character 3 */
412         ushort  scc_char4;      /* control character 4 */
413         ushort  scc_char5;      /* control character 5 */
414         ushort  scc_char6;      /* control character 6 */
415         ushort  scc_char7;      /* control character 7 */
416         ushort  scc_char8;      /* control character 8 */
417         ushort  scc_rccm;       /* receive control character mask */
418         ushort  scc_rccr;       /* receive control character register */
419         ushort  scc_rlbc;       /* receive last break character */
420 } scc_uart_t;
421
422 /* SCC Event and Mask registers when it is used as a UART.
423 */
424 #define UART_SCCM_GLR           ((ushort)0x1000)
425 #define UART_SCCM_GLT           ((ushort)0x0800)
426 #define UART_SCCM_AB            ((ushort)0x0200)
427 #define UART_SCCM_IDL           ((ushort)0x0100)
428 #define UART_SCCM_GRA           ((ushort)0x0080)
429 #define UART_SCCM_BRKE          ((ushort)0x0040)
430 #define UART_SCCM_BRKS          ((ushort)0x0020)
431 #define UART_SCCM_CCR           ((ushort)0x0008)
432 #define UART_SCCM_BSY           ((ushort)0x0004)
433 #define UART_SCCM_TX            ((ushort)0x0002)
434 #define UART_SCCM_RX            ((ushort)0x0001)
435
436 /* The SCC PMSR when used as a UART.
437 */
438 #define SCU_PSMR_FLC            ((ushort)0x8000)
439 #define SCU_PSMR_SL             ((ushort)0x4000)
440 #define SCU_PSMR_CL             ((ushort)0x3000)
441 #define SCU_PSMR_UM             ((ushort)0x0c00)
442 #define SCU_PSMR_FRZ            ((ushort)0x0200)
443 #define SCU_PSMR_RZS            ((ushort)0x0100)
444 #define SCU_PSMR_SYN            ((ushort)0x0080)
445 #define SCU_PSMR_DRT            ((ushort)0x0040)
446 #define SCU_PSMR_PEN            ((ushort)0x0010)
447 #define SCU_PSMR_RPM            ((ushort)0x000c)
448 #define SCU_PSMR_REVP           ((ushort)0x0008)
449 #define SCU_PSMR_TPM            ((ushort)0x0003)
450 #define SCU_PSMR_TEVP           ((ushort)0x0002)
451
452 /* CPM Transparent mode SCC.
453  */
454 typedef struct scc_trans {
455         sccp_t  st_genscc;
456         uint    st_cpres;       /* Preset CRC */
457         uint    st_cmask;       /* Constant mask for CRC */
458 } scc_trans_t;
459
460 /* IIC parameter RAM.
461 */
462 typedef struct iic {
463         ushort  iic_rbase;      /* Rx Buffer descriptor base address */
464         ushort  iic_tbase;      /* Tx Buffer descriptor base address */
465         u_char  iic_rfcr;       /* Rx function code */
466         u_char  iic_tfcr;       /* Tx function code */
467         ushort  iic_mrblr;      /* Max receive buffer length */
468         uint    iic_rstate;     /* Internal */
469         uint    iic_rdp;        /* Internal */
470         ushort  iic_rbptr;      /* Internal */
471         ushort  iic_rbc;        /* Internal */
472         uint    iic_rxtmp;      /* Internal */
473         uint    iic_tstate;     /* Internal */
474         uint    iic_tdp;        /* Internal */
475         ushort  iic_tbptr;      /* Internal */
476         ushort  iic_tbc;        /* Internal */
477         uint    iic_txtmp;      /* Internal */
478         char    res1[4];        /* Reserved */
479         ushort  iic_rpbase;     /* Relocation pointer */
480         char    res2[2];        /* Reserved */
481 } iic_t;
482
483 /*
484  * RISC Controller Configuration Register definitons
485  */
486 #define RCCR_TIME       0x8000                  /* RISC Timer Enable */
487 #define RCCR_TIMEP(t)   (((t) & 0x3F)<<8)       /* RISC Timer Period */
488 #define RCCR_TIME_MASK  0x00FF                  /* not RISC Timer related bits */
489
490 /* RISC Timer Parameter RAM offset */
491 #define PROFF_RTMR      ((uint)0x01B0)
492
493 typedef struct risc_timer_pram {
494         unsigned short  tm_base;        /* RISC Timer Table Base Address */
495         unsigned short  tm_ptr;         /* RISC Timer Table Pointer (internal) */
496         unsigned short  r_tmr;          /* RISC Timer Mode Register */
497         unsigned short  r_tmv;          /* RISC Timer Valid Register */
498         unsigned long   tm_cmd;         /* RISC Timer Command Register */
499         unsigned long   tm_cnt;         /* RISC Timer Internal Count */
500 } rt_pram_t;
501
502 /* Bits in RISC Timer Command Register */
503 #define TM_CMD_VALID    0x80000000      /* Valid - Enables the timer */
504 #define TM_CMD_RESTART  0x40000000      /* Restart - for automatic restart */
505 #define TM_CMD_PWM      0x20000000      /* Run in Pulse Width Modulation Mode */
506 #define TM_CMD_NUM(n)   (((n)&0xF)<<16) /* Timer Number */
507 #define TM_CMD_PERIOD(p) ((p)&0xFFFF)   /* Timer Period */
508
509 /* CPM interrupts.  There are nearly 32 interrupts generated by CPM
510  * channels or devices.  All of these are presented to the PPC core
511  * as a single interrupt.  The CPM interrupt handler dispatches its
512  * own handlers, in a similar fashion to the PPC core handler.  We
513  * use the table as defined in the manuals (i.e. no special high
514  * priority and SCC1 == SCCa, etc...).
515  */
516 #define CPMVEC_NR               32
517 #define CPMVEC_PIO_PC15         ((ushort)0x1f)
518 #define CPMVEC_SCC1             ((ushort)0x1e)
519 #define CPMVEC_SCC2             ((ushort)0x1d)
520 #define CPMVEC_SCC3             ((ushort)0x1c)
521 #define CPMVEC_SCC4             ((ushort)0x1b)
522 #define CPMVEC_PIO_PC14         ((ushort)0x1a)
523 #define CPMVEC_TIMER1           ((ushort)0x19)
524 #define CPMVEC_PIO_PC13         ((ushort)0x18)
525 #define CPMVEC_PIO_PC12         ((ushort)0x17)
526 #define CPMVEC_SDMA_CB_ERR      ((ushort)0x16)
527 #define CPMVEC_IDMA1            ((ushort)0x15)
528 #define CPMVEC_IDMA2            ((ushort)0x14)
529 #define CPMVEC_TIMER2           ((ushort)0x12)
530 #define CPMVEC_RISCTIMER        ((ushort)0x11)
531 #define CPMVEC_I2C              ((ushort)0x10)
532 #define CPMVEC_PIO_PC11         ((ushort)0x0f)
533 #define CPMVEC_PIO_PC10         ((ushort)0x0e)
534 #define CPMVEC_TIMER3           ((ushort)0x0c)
535 #define CPMVEC_PIO_PC9          ((ushort)0x0b)
536 #define CPMVEC_PIO_PC8          ((ushort)0x0a)
537 #define CPMVEC_PIO_PC7          ((ushort)0x09)
538 #define CPMVEC_TIMER4           ((ushort)0x07)
539 #define CPMVEC_PIO_PC6          ((ushort)0x06)
540 #define CPMVEC_SPI              ((ushort)0x05)
541 #define CPMVEC_SMC1             ((ushort)0x04)
542 #define CPMVEC_SMC2             ((ushort)0x03)
543 #define CPMVEC_PIO_PC5          ((ushort)0x02)
544 #define CPMVEC_PIO_PC4          ((ushort)0x01)
545 #define CPMVEC_ERROR            ((ushort)0x00)
546
547 /* CPM interrupt configuration vector.
548 */
549 #define CICR_SCD_SCC4           ((uint)0x00c00000)      /* SCC4 @ SCCd */
550 #define CICR_SCC_SCC3           ((uint)0x00200000)      /* SCC3 @ SCCc */
551 #define CICR_SCB_SCC2           ((uint)0x00040000)      /* SCC2 @ SCCb */
552 #define CICR_SCA_SCC1           ((uint)0x00000000)      /* SCC1 @ SCCa */
553 #define CICR_IRL_MASK           ((uint)0x0000e000)      /* Core interrupt */
554 #define CICR_HP_MASK            ((uint)0x00001f00)      /* Hi-pri int. */
555 #define CICR_IEN                ((uint)0x00000080)      /* Int. enable */
556 #define CICR_SPS                ((uint)0x00000001)      /* SCC Spread */
557
558 #define CPM_PIN_INPUT     0
559 #define CPM_PIN_OUTPUT    1
560 #define CPM_PIN_PRIMARY   0
561 #define CPM_PIN_SECONDARY 2
562 #define CPM_PIN_GPIO      4
563 #define CPM_PIN_OPENDRAIN 8
564 #define CPM_PIN_FALLEDGE  16
565 #define CPM_PIN_ANYEDGE   0
566
567 enum cpm_port {
568         CPM_PORTA,
569         CPM_PORTB,
570         CPM_PORTC,
571         CPM_PORTD,
572         CPM_PORTE,
573 };
574
575 void cpm1_set_pin(enum cpm_port port, int pin, int flags);
576
577 enum cpm_clk_dir {
578         CPM_CLK_RX,
579         CPM_CLK_TX,
580         CPM_CLK_RTX
581 };
582
583 enum cpm_clk_target {
584         CPM_CLK_SCC1,
585         CPM_CLK_SCC2,
586         CPM_CLK_SCC3,
587         CPM_CLK_SCC4,
588         CPM_CLK_SMC1,
589         CPM_CLK_SMC2,
590 };
591
592 enum cpm_clk {
593         CPM_BRG1,       /* Baud Rate Generator  1 */
594         CPM_BRG2,       /* Baud Rate Generator  2 */
595         CPM_BRG3,       /* Baud Rate Generator  3 */
596         CPM_BRG4,       /* Baud Rate Generator  4 */
597         CPM_CLK1,       /* Clock  1 */
598         CPM_CLK2,       /* Clock  2 */
599         CPM_CLK3,       /* Clock  3 */
600         CPM_CLK4,       /* Clock  4 */
601         CPM_CLK5,       /* Clock  5 */
602         CPM_CLK6,       /* Clock  6 */
603         CPM_CLK7,       /* Clock  7 */
604         CPM_CLK8,       /* Clock  8 */
605 };
606
607 int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode);
608
609 #endif /* __CPM1__ */