Linux-libre 5.7.3-gnu
[librecmc/linux-libre.git] / arch / powerpc / boot / dts / lite5200b.dts
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Lite5200B board Device Tree Source
4  *
5  * Copyright 2006-2007 Secret Lab Technologies Ltd.
6  * Grant Likely <grant.likely@secretlab.ca>
7  */
8
9 /include/ "mpc5200b.dtsi"
10
11 &gpt0 { fsl,has-wdt; };
12 &gpt2 { gpio-controller; };
13 &gpt3 { gpio-controller; };
14
15 / {
16         model = "fsl,lite5200b";
17         compatible = "fsl,lite5200b";
18
19         leds {
20                 compatible = "gpio-leds";
21                 tmr2 {
22                         gpios = <&gpt2 0 1>;
23                 };
24                 tmr3 {
25                         gpios = <&gpt3 0 1>;
26                         linux,default-trigger = "heartbeat";
27                 };
28                 led1 { gpios = <&gpio_wkup 2 1>; };
29                 led2 { gpios = <&gpio_simple 3 1>; };
30                 led3 { gpios = <&gpio_wkup 3 1>; };
31                 led4 { gpios = <&gpio_simple 2 1>; };
32         };
33
34         memory {
35                 reg = <0x00000000 0x10000000>;  // 256MB
36         };
37
38         soc5200@f0000000 {
39                 psc@2000 {              // PSC1
40                         compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
41                         cell-index = <0>;
42                 };
43
44                 psc@2200 {              // PSC2
45                         status = "disabled";
46                 };
47
48                 psc@2400 {              // PSC3
49                         status = "disabled";
50                 };
51
52                 psc@2600 {              // PSC4
53                         status = "disabled";
54                 };
55
56                 psc@2800 {              // PSC5
57                         status = "disabled";
58                 };
59
60                 psc@2c00 {              // PSC6
61                         status = "disabled";
62                 };
63
64                 // PSC2 in ac97 mode example
65                 //ac97@2200 {           // PSC2
66                 //      compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97";
67                 //      cell-index = <1>;
68                 //};
69
70                 // PSC3 in CODEC mode example
71                 //i2s@2400 {            // PSC3
72                 //      compatible = "fsl,mpc5200b-psc-i2s"; //not 5200 compatible
73                 //      cell-index = <2>;
74                 //};
75
76                 // PSC6 in spi mode example
77                 //spi@2c00 {            // PSC6
78                 //      compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
79                 //      cell-index = <5>;
80                 //};
81
82                 ethernet@3000 {
83                         phy-handle = <&phy0>;
84                 };
85
86                 mdio@3000 {
87                         phy0: ethernet-phy@0 {
88                                 reg = <0>;
89                         };
90                 };
91
92                 i2c@3d40 {
93                         eeprom@50 {
94                                 compatible = "atmel,24c02";
95                                 reg = <0x50>;
96                         };
97                 };
98
99                 sram@8000 {
100                         compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
101                         reg = <0x8000 0x4000>;
102                 };
103         };
104
105         pci@f0000d00 {
106                 interrupt-map-mask = <0xf800 0 0 7>;
107                 interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
108                                  0xc000 0 0 2 &mpc5200_pic 1 1 3
109                                  0xc000 0 0 3 &mpc5200_pic 1 2 3
110                                  0xc000 0 0 4 &mpc5200_pic 1 3 3
111
112                                  0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
113                                  0xc800 0 0 2 &mpc5200_pic 1 2 3
114                                  0xc800 0 0 3 &mpc5200_pic 1 3 3
115                                  0xc800 0 0 4 &mpc5200_pic 0 0 3>;
116                 clock-frequency = <0>; // From boot loader
117                 interrupts = <2 8 0 2 9 0 2 10 0>;
118                 bus-range = <0 0>;
119                 ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
120                           0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
121                           0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
122         };
123
124         localbus {
125                 ranges = <0 0 0xfe000000 0x02000000>;
126
127                 flash@0,0 {
128                         compatible = "cfi-flash";
129                         reg = <0 0 0x02000000>;
130                         bank-width = <1>;
131                         #size-cells = <1>;
132                         #address-cells = <1>;
133
134                         partition@0 {
135                                 label = "kernel";
136                                 reg = <0x00000000 0x00200000>;
137                         };
138                         partition@200000 {
139                                 label = "rootfs";
140                                 reg = <0x00200000 0x01d00000>;
141                         };
142                         partition@1f00000 {
143                                 label = "u-boot";
144                                 reg = <0x01f00000 0x00060000>;
145                         };
146                         partition@1f60000 {
147                                 label = "u-boot-env";
148                                 reg = <0x01f60000 0x00020000>;
149                         };
150                         partition@1f80000 {
151                                 label = "dtb";
152                                 reg = <0x01f80000 0x00080000>;
153                         };
154                 };
155         };
156
157 };