arch/powerpc/boot/dts/fsl/p3041ds.dts

   1 /*
   2  * P3041DS Device Tree Source
   3  *
   4  * Copyright 2010 - 2015 Freescale Semiconductor Inc.
   5  *
   6  * Redistribution and use in source and binary forms, with or without
   7  * modification, are permitted provided that the following conditions are met:
   8  *     * Redistributions of source code must retain the above copyright
   9  *       notice, this list of conditions and the following disclaimer.
  10  *     * Redistributions in binary form must reproduce the above copyright
  11  *       notice, this list of conditions and the following disclaimer in the
  12  *       documentation and/or other materials provided with the distribution.
  13  *     * Neither the name of Freescale Semiconductor nor the
  14  *       names of its contributors may be used to endorse or promote products
  15  *       derived from this software without specific prior written permission.
  16  *
  17  *
  18  * ALTERNATIVELY, this software may be distributed under the terms of the
  19  * GNU General Public License ("GPL") as published by the Free Software
  20  * Foundation, either version 2 of that License or (at your option) any
  21  * later version.
  22  *
  23  * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
  24  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  25  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  26  * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
  27  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  28  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  29  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  30  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  31  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  32  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  33  */
  34
  35 /include/ "p3041si-pre.dtsi"
  36
  37 / {
  38         model = "fsl,P3041DS";
  39         compatible = "fsl,P3041DS";
  40         #address-cells = <2>;
  41         #size-cells = <2>;
  42         interrupt-parent = <&mpic>;
  43
  44         aliases{
  45                 phy_rgmii_0 = &phy_rgmii_0;
  46                 phy_rgmii_1 = &phy_rgmii_1;
  47                 phy_sgmii_1c = &phy_sgmii_1c;
  48                 phy_sgmii_1d = &phy_sgmii_1d;
  49                 phy_sgmii_1e = &phy_sgmii_1e;
  50                 phy_sgmii_1f = &phy_sgmii_1f;
  51                 phy_xgmii_1 = &phy_xgmii_1;
  52                 phy_xgmii_2 = &phy_xgmii_2;
  53                 emi1_rgmii = &hydra_mdio_rgmii;
  54                 emi1_sgmii = &hydra_mdio_sgmii;
  55                 emi2_xgmii = &hydra_mdio_xgmii;
  56         };
  57
  58         memory {
  59                 device_type = "memory";
  60         };
  61
  62         reserved-memory {
  63                 #address-cells = <2>;
  64                 #size-cells = <2>;
  65                 ranges;
  66
  67                 bman_fbpr: bman-fbpr {
  68                         size = <0 0x1000000>;
  69                         alignment = <0 0x1000000>;
  70                 };
  71                 qman_fqd: qman-fqd {
  72                         size = <0 0x400000>;
  73                         alignment = <0 0x400000>;
  74                 };
  75                 qman_pfdr: qman-pfdr {
  76                         size = <0 0x2000000>;
  77                         alignment = <0 0x2000000>;
  78                 };
  79         };
  80
  81         dcsr: dcsr@f00000000 {
  82                 ranges = <0x00000000 0xf 0x00000000 0x01008000>;
  83         };
  84
  85         bportals: bman-portals@ff4000000 {
  86                 ranges = <0x0 0xf 0xf4000000 0x200000>;
  87         };
  88
  89         qportals: qman-portals@ff4200000 {
  90                 ranges = <0x0 0xf 0xf4200000 0x200000>;
  91         };
  92
  93         soc: soc@ffe000000 {
  94                 ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
  95                 reg = <0xf 0xfe000000 0 0x00001000>;
  96                 spi@110000 {
  97                         flash@0 {
  98                                 #address-cells = <1>;
  99                                 #size-cells = <1>;
 100                                 compatible = "spansion,s25sl12801", "jedec,spi-nor";
 101                                 reg = <0>;
 102                                 spi-max-frequency = <35000000>; /* input clock */
 103                                 partition@u-boot {
 104                                         label = "u-boot";
 105                                         reg = <0x00000000 0x00100000>;
 106                                         read-only;
 107                                 };
 108                                 partition@kernel {
 109                                         label = "kernel";
 110                                         reg = <0x00100000 0x00500000>;
 111                                         read-only;
 112                                 };
 113                                 partition@dtb {
 114                                         label = "dtb";
 115                                         reg = <0x00600000 0x00100000>;
 116                                         read-only;
 117                                 };
 118                                 partition@fs {
 119                                         label = "file system";
 120                                         reg = <0x00700000 0x00900000>;
 121                                 };
 122                         };
 123                 };
 124
 125                 i2c@118100 {
 126                         eeprom@51 {
 127                                 compatible = "at24,24c256";
 128                                 reg = <0x51>;
 129                         };
 130                         eeprom@52 {
 131                                 compatible = "at24,24c256";
 132                                 reg = <0x52>;
 133                         };
 134                 };
 135
 136                 i2c@119100 {
 137                         rtc@68 {
 138                                 compatible = "dallas,ds3232";
 139                                 reg = <0x68>;
 140                                 interrupts = <0x1 0x1 0 0>;
 141                         };
 142                         ina220@40 {
 143                                 compatible = "ti,ina220";
 144                                 reg = <0x40>;
 145                                 shunt-resistor = <1000>;
 146                         };
 147                         ina220@41 {
 148                                 compatible = "ti,ina220";
 149                                 reg = <0x41>;
 150                                 shunt-resistor = <1000>;
 151                         };
 152                         ina220@44 {
 153                                 compatible = "ti,ina220";
 154                                 reg = <0x44>;
 155                                 shunt-resistor = <1000>;
 156                         };
 157                         ina220@45 {
 158                                 compatible = "ti,ina220";
 159                                 reg = <0x45>;
 160                                 shunt-resistor = <1000>;
 161                         };
 162                         adt7461@4c {
 163                                 compatible = "adi,adt7461";
 164                                 reg = <0x4c>;
 165                         };
 166                 };
 167
 168                 fman@400000{
 169                         ethernet@e0000 {
 170                                 phy-handle = <&phy_sgmii_1c>;
 171                                 phy-connection-type = "sgmii";
 172                         };
 173
 174                         ethernet@e2000 {
 175                                 phy-handle = <&phy_sgmii_1d>;
 176                                 phy-connection-type = "sgmii";
 177                         };
 178
 179                         ethernet@e4000 {
 180                                 phy-handle = <&phy_sgmii_1e>;
 181                                 phy-connection-type = "sgmii";
 182                         };
 183
 184                         ethernet@e6000 {
 185                                 phy-handle = <&phy_sgmii_1f>;
 186                                 phy-connection-type = "sgmii";
 187                         };
 188
 189                         ethernet@e8000 {
 190                                 phy-handle = <&phy_rgmii_1>;
 191                                 phy-connection-type = "rgmii";
 192                         };
 193
 194                         ethernet@f0000 {
 195                                 phy-handle = <&phy_xgmii_1>;
 196                                 phy-connection-type = "xgmii";
 197                         };
 198
 199                         hydra_mdio_xgmii: mdio@f1000 {
 200                                 status = "disabled";
 201
 202                                 phy_xgmii_1: ethernet-phy@4 {
 203                                         compatible = "ethernet-phy-ieee802.3-c45";
 204                                         reg = <0x4>;
 205                                 };
 206
 207                                 phy_xgmii_2: ethernet-phy@0 {
 208                                         compatible = "ethernet-phy-ieee802.3-c45";
 209                                         reg = <0x0>;
 210                                 };
 211                         };
 212                 };
 213         };
 214
 215         rio: rapidio@ffe0c0000 {
 216                 reg = <0xf 0xfe0c0000 0 0x11000>;
 217
 218                 port1 {
 219                         ranges = <0 0 0xc 0x20000000 0 0x10000000>;
 220                 };
 221                 port2 {
 222                         ranges = <0 0 0xc 0x30000000 0 0x10000000>;
 223                 };
 224         };
 225
 226         lbc: localbus@ffe124000 {
 227                 reg = <0xf 0xfe124000 0 0x1000>;
 228                 ranges = <0 0 0xf 0xe8000000 0x08000000
 229                           2 0 0xf 0xffa00000 0x00040000
 230                           3 0 0xf 0xffdf0000 0x00008000>;
 231
 232                 flash@0,0 {
 233                         compatible = "cfi-flash";
 234                         reg = <0 0 0x08000000>;
 235                         bank-width = <2>;
 236                         device-width = <2>;
 237                 };
 238
 239                 nand@2,0 {
 240                         #address-cells = <1>;
 241                         #size-cells = <1>;
 242                         compatible = "fsl,elbc-fcm-nand";
 243                         reg = <0x2 0x0 0x40000>;
 244
 245                         partition@0 {
 246                                 label = "NAND U-Boot Image";
 247                                 reg = <0x0 0x02000000>;
 248                                 read-only;
 249                         };
 250
 251                         partition@2000000 {
 252                                 label = "NAND Root File System";
 253                                 reg = <0x02000000 0x10000000>;
 254                         };
 255
 256                         partition@12000000 {
 257                                 label = "NAND Compressed RFS Image";
 258                                 reg = <0x12000000 0x08000000>;
 259                         };
 260
 261                         partition@1a000000 {
 262                                 label = "NAND Linux Kernel Image";
 263                                 reg = <0x1a000000 0x04000000>;
 264                         };
 265
 266                         partition@1e000000 {
 267                                 label = "NAND DTB Image";
 268                                 reg = <0x1e000000 0x01000000>;
 269                         };
 270
 271                         partition@1f000000 {
 272                                 label = "NAND Writable User area";
 273                                 reg = <0x1f000000 0x21000000>;
 274                         };
 275                 };
 276
 277                 board-control@3,0 {
 278                         #address-cells = <1>;
 279                         #size-cells = <1>;
 280                         compatible = "fsl,p3041ds-fpga", "fsl,fpga-ngpixis";
 281                         reg = <3 0 0x30>;
 282                         ranges = <0 3 0 0x30>;
 283
 284                         mdio-mux-emi1 {
 285                                 #address-cells = <1>;
 286                                 #size-cells = <0>;
 287                                 compatible = "mdio-mux-mmioreg", "mdio-mux";
 288                                 mdio-parent-bus = <&mdio0>;
 289                                 reg = <9 1>;
 290                                 mux-mask = <0x78>;
 291
 292                                 hydra_mdio_rgmii: rgmii-mdio@8 {
 293                                         #address-cells = <1>;
 294                                         #size-cells = <0>;
 295                                         reg = <8>;
 296                                         status = "disabled";
 297
 298                                         phy_rgmii_0: ethernet-phy@0 {
 299                                                 reg = <0x0>;
 300                                         };
 301
 302                                         phy_rgmii_1: ethernet-phy@1 {
 303                                                 reg = <0x1>;
 304                                         };
 305                                 };
 306
 307                                 hydra_mdio_sgmii: sgmii-mdio@28 {
 308                                         #address-cells = <1>;
 309                                         #size-cells = <0>;
 310                                         reg = <0x28>;
 311                                         status = "disabled";
 312
 313                                         phy_sgmii_1c: ethernet-phy@1c {
 314                                                 reg = <0x1c>;
 315                                         };
 316
 317                                         phy_sgmii_1d: ethernet-phy@1d {
 318                                                 reg = <0x1d>;
 319                                         };
 320
 321                                         phy_sgmii_1e: ethernet-phy@1e {
 322                                                 reg = <0x1e>;
 323                                         };
 324
 325                                         phy_sgmii_1f: ethernet-phy@1f {
 326                                                 reg = <0x1f>;
 327                                         };
 328                                 };
 329                         };
 330                 };
 331         };
 332
 333         pci0: pcie@ffe200000 {
 334                 reg = <0xf 0xfe200000 0 0x1000>;
 335                 ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
 336                           0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
 337                 pcie@0 {
 338                         ranges = <0x02000000 0 0xe0000000
 339                                   0x02000000 0 0xe0000000
 340                                   0 0x20000000
 341
 342                                   0x01000000 0 0x00000000
 343                                   0x01000000 0 0x00000000
 344                                   0 0x00010000>;
 345                 };
 346         };
 347
 348         pci1: pcie@ffe201000 {
 349                 reg = <0xf 0xfe201000 0 0x1000>;
 350                 ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
 351                           0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
 352                 pcie@0 {
 353                         ranges = <0x02000000 0 0xe0000000
 354                                   0x02000000 0 0xe0000000
 355                                   0 0x20000000
 356
 357                                   0x01000000 0 0x00000000
 358                                   0x01000000 0 0x00000000
 359                                   0 0x00010000>;
 360                 };
 361         };
 362
 363         pci2: pcie@ffe202000 {
 364                 reg = <0xf 0xfe202000 0 0x1000>;
 365                 ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
 366                           0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
 367                 pcie@0 {
 368                         ranges = <0x02000000 0 0xe0000000
 369                                   0x02000000 0 0xe0000000
 370                                   0 0x20000000
 371
 372                                   0x01000000 0 0x00000000
 373                                   0x01000000 0 0x00000000
 374                                   0 0x00010000>;
 375                 };
 376         };
 377
 378         pci3: pcie@ffe203000 {
 379                 reg = <0xf 0xfe203000 0 0x1000>;
 380                 ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
 381                           0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
 382                 pcie@0 {
 383                         ranges = <0x02000000 0 0xe0000000
 384                                   0x02000000 0 0xe0000000
 385                                   0 0x20000000
 386
 387                                   0x01000000 0 0x00000000
 388                                   0x01000000 0 0x00000000
 389                                   0 0x00010000>;
 390                 };
 391         };
 392 };
 393
 394 /include/ "p3041si-post.dtsi"