arch/mips/bcm63xx/setup.c

   1 /*
   2  * This file is subject to the terms and conditions of the GNU General Public
   3  * License.  See the file "COPYING" in the main directory of this archive
   4  * for more details.
   5  *
   6  * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
   7  */
   8
   9 #include <linux/init.h>
  10 #include <linux/kernel.h>
  11 #include <linux/delay.h>
  12 #include <linux/bootmem.h>
  13 #include <linux/ioport.h>
  14 #include <linux/pm.h>
  15 #include <asm/bootinfo.h>
  16 #include <asm/time.h>
  17 #include <asm/reboot.h>
  18 #include <asm/cacheflush.h>
  19 #include <bcm63xx_board.h>
  20 #include <bcm63xx_cpu.h>
  21 #include <bcm63xx_regs.h>
  22 #include <bcm63xx_io.h>
  23
  24 void bcm63xx_machine_halt(void)
  25 {
  26         printk(KERN_INFO "System halted\n");
  27         while (1)
  28                 ;
  29 }
  30
  31 static void bcm6348_a1_reboot(void)
  32 {
  33         u32 reg;
  34
  35         /* soft reset all blocks */
  36         printk(KERN_INFO "soft-resetting all blocks ...\n");
  37         reg = bcm_perf_readl(PERF_SOFTRESET_REG);
  38         reg &= ~SOFTRESET_6348_ALL;
  39         bcm_perf_writel(reg, PERF_SOFTRESET_REG);
  40         mdelay(10);
  41
  42         reg = bcm_perf_readl(PERF_SOFTRESET_REG);
  43         reg |= SOFTRESET_6348_ALL;
  44         bcm_perf_writel(reg, PERF_SOFTRESET_REG);
  45         mdelay(10);
  46
  47         /* Jump to the power on address. */
  48         printk(KERN_INFO "jumping to reset vector.\n");
  49         /* set high vectors (base at 0xbfc00000 */
  50         set_c0_status(ST0_BEV | ST0_ERL);
  51         /* run uncached in kseg0 */
  52         change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
  53         __flush_cache_all();
  54         /* remove all wired TLB entries */
  55         write_c0_wired(0);
  56         __asm__ __volatile__(
  57                 "jr\t%0"
  58                 :
  59                 : "r" (0xbfc00000));
  60         while (1)
  61                 ;
  62 }
  63
  64 void bcm63xx_machine_reboot(void)
  65 {
  66         u32 reg, perf_regs[2] = { 0, 0 };
  67         unsigned int i;
  68
  69         /* mask and clear all external irq */
  70         switch (bcm63xx_get_cpu_id()) {
  71         case BCM3368_CPU_ID:
  72                 perf_regs[0] = PERF_EXTIRQ_CFG_REG_3368;
  73                 break;
  74         case BCM6328_CPU_ID:
  75                 perf_regs[0] = PERF_EXTIRQ_CFG_REG_6328;
  76                 break;
  77         case BCM6338_CPU_ID:
  78                 perf_regs[0] = PERF_EXTIRQ_CFG_REG_6338;
  79                 break;
  80         case BCM6345_CPU_ID:
  81                 perf_regs[0] = PERF_EXTIRQ_CFG_REG_6345;
  82                 break;
  83         case BCM6348_CPU_ID:
  84                 perf_regs[0] = PERF_EXTIRQ_CFG_REG_6348;
  85                 break;
  86         case BCM6358_CPU_ID:
  87                 perf_regs[0] = PERF_EXTIRQ_CFG_REG_6358;
  88                 break;
  89         case BCM6362_CPU_ID:
  90                 perf_regs[0] = PERF_EXTIRQ_CFG_REG_6362;
  91                 break;
  92         }
  93
  94         for (i = 0; i < 2; i++) {
  95                 if (!perf_regs[i])
  96                         break;
  97
  98                 reg = bcm_perf_readl(perf_regs[i]);
  99                 if (BCMCPU_IS_6348()) {
 100                         reg &= ~EXTIRQ_CFG_MASK_ALL_6348;
 101                         reg |= EXTIRQ_CFG_CLEAR_ALL_6348;
 102                 } else {
 103                         reg &= ~EXTIRQ_CFG_MASK_ALL;
 104                         reg |= EXTIRQ_CFG_CLEAR_ALL;
 105                 }
 106                 bcm_perf_writel(reg, perf_regs[i]);
 107         }
 108
 109         if (BCMCPU_IS_6348() && (bcm63xx_get_cpu_rev() == 0xa1))
 110                 bcm6348_a1_reboot();
 111
 112         printk(KERN_INFO "triggering watchdog soft-reset...\n");
 113         if (BCMCPU_IS_6328()) {
 114                 bcm_wdt_writel(1, WDT_SOFTRESET_REG);
 115         } else {
 116                 reg = bcm_perf_readl(PERF_SYS_PLL_CTL_REG);
 117                 reg |= SYS_PLL_SOFT_RESET;
 118                 bcm_perf_writel(reg, PERF_SYS_PLL_CTL_REG);
 119         }
 120         while (1)
 121                 ;
 122 }
 123
 124 static void __bcm63xx_machine_reboot(char *p)
 125 {
 126         bcm63xx_machine_reboot();
 127 }
 128
 129 /*
 130  * return system type in /proc/cpuinfo
 131  */
 132 const char *get_system_type(void)
 133 {
 134         static char buf[128];
 135         snprintf(buf, sizeof(buf), "bcm63xx/%s (0x%04x/0x%02X)",
 136                  board_get_name(),
 137                  bcm63xx_get_cpu_id(), bcm63xx_get_cpu_rev());
 138         return buf;
 139 }
 140
 141 void __init plat_time_init(void)
 142 {
 143         mips_hpt_frequency = bcm63xx_get_cpu_freq() / 2;
 144 }
 145
 146 void __init plat_mem_setup(void)
 147 {
 148         add_memory_region(0, bcm63xx_get_memory_size(), BOOT_MEM_RAM);
 149
 150         _machine_halt = bcm63xx_machine_halt;
 151         _machine_restart = __bcm63xx_machine_reboot;
 152         pm_power_off = bcm63xx_machine_halt;
 153
 154         set_io_port_base(0);
 155         ioport_resource.start = 0;
 156         ioport_resource.end = ~0;
 157
 158         board_setup();
 159 }
 160
 161 int __init bcm63xx_register_devices(void)
 162 {
 163         return board_register_devices();
 164 }
 165
 166 arch_initcall(bcm63xx_register_devices);