arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * SAMSUNG Exynos5433 TM2 board device tree source
   4  *
   5  * Copyright (c) 2016 Samsung Electronics Co., Ltd.
   6  *
   7  * Common device tree source file for Samsung's TM2 and TM2E boards
   8  * which are based on Samsung Exynos5433 SoC.
   9  */
  10
  11 /dts-v1/;
  12 #include "exynos5433.dtsi"
  13 #include <dt-bindings/clock/samsung,s2mps11.h>
  14 #include <dt-bindings/gpio/gpio.h>
  15 #include <dt-bindings/input/input.h>
  16 #include <dt-bindings/interrupt-controller/irq.h>
  17 #include <dt-bindings/sound/samsung-i2s.h>
  18
  19 / {
  20         aliases {
  21                 gsc0 = &gsc_0;
  22                 gsc1 = &gsc_1;
  23                 gsc2 = &gsc_2;
  24                 pinctrl0 = &pinctrl_alive;
  25                 pinctrl1 = &pinctrl_aud;
  26                 pinctrl2 = &pinctrl_cpif;
  27                 pinctrl3 = &pinctrl_ese;
  28                 pinctrl4 = &pinctrl_finger;
  29                 pinctrl5 = &pinctrl_fsys;
  30                 pinctrl6 = &pinctrl_imem;
  31                 pinctrl7 = &pinctrl_nfc;
  32                 pinctrl8 = &pinctrl_peric;
  33                 pinctrl9 = &pinctrl_touch;
  34                 serial0 = &serial_0;
  35                 serial1 = &serial_1;
  36                 serial2 = &serial_2;
  37                 serial3 = &serial_3;
  38                 spi0 = &spi_0;
  39                 spi1 = &spi_1;
  40                 spi2 = &spi_2;
  41                 spi3 = &spi_3;
  42                 spi4 = &spi_4;
  43                 mshc0 = &mshc_0;
  44                 mshc2 = &mshc_2;
  45         };
  46
  47         chosen {
  48                 stdout-path = &serial_1;
  49         };
  50
  51         memory@20000000 {
  52                 device_type = "memory";
  53                 reg = <0x0 0x20000000 0x0 0xc0000000>;
  54         };
  55
  56         gpio-keys {
  57                 compatible = "gpio-keys";
  58
  59                 power-key {
  60                         gpios = <&gpa2 7 GPIO_ACTIVE_LOW>;
  61                         linux,code = <KEY_POWER>;
  62                         label = "power key";
  63                         debounce-interval = <10>;
  64                 };
  65
  66                 volume-up-key {
  67                         gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
  68                         linux,code = <KEY_VOLUMEUP>;
  69                         label = "volume-up key";
  70                         debounce-interval = <10>;
  71                 };
  72
  73                 volume-down-key {
  74                         gpios = <&gpa2 1 GPIO_ACTIVE_LOW>;
  75                         linux,code = <KEY_VOLUMEDOWN>;
  76                         label = "volume-down key";
  77                         debounce-interval = <10>;
  78                 };
  79
  80                 homepage-key {
  81                         gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
  82                         linux,code = <KEY_MENU>;
  83                         label = "homepage key";
  84                         debounce-interval = <10>;
  85                 };
  86         };
  87
  88         i2c_max98504: i2c-gpio-0 {
  89                 compatible = "i2c-gpio";
  90                 gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */
  91                          &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >;
  92                 i2c-gpio,delay-us = <2>;
  93                 #address-cells = <1>;
  94                 #size-cells = <0>;
  95                 status = "okay";
  96
  97                 max98504: max98504@31 {
  98                         compatible = "maxim,max98504";
  99                         reg = <0x31>;
 100                         maxim,rx-path = <1>;
 101                         maxim,tx-path = <1>;
 102                         maxim,tx-channel-mask = <3>;
 103                         maxim,tx-channel-source = <2>;
 104                 };
 105         };
 106
 107         irda_regulator: irda-regulator {
 108                 compatible = "regulator-fixed";
 109                 enable-active-high;
 110                 gpio = <&gpr3 3 GPIO_ACTIVE_HIGH>;
 111                 regulator-name = "irda_regulator";
 112         };
 113
 114         sound {
 115                 compatible = "samsung,tm2-audio";
 116                 audio-codec = <&wm5110>, <&hdmi>;
 117                 i2s-controller = <&i2s0 0>, <&i2s1 0>;
 118                 audio-amplifier = <&max98504>;
 119                 mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>;
 120                 model = "wm5110";
 121                 samsung,audio-routing =
 122                         /* Headphone */
 123                         "HP", "HPOUT1L",
 124                         "HP", "HPOUT1R",
 125
 126                         /* Speaker */
 127                         "SPK", "SPKOUT",
 128                         "SPKOUT", "HPOUT2L",
 129                         "SPKOUT", "HPOUT2R",
 130
 131                         /* Receiver */
 132                         "RCV", "HPOUT3L",
 133                         "RCV", "HPOUT3R";
 134                 status = "okay";
 135         };
 136 };
 137
 138 &adc {
 139         vdd-supply = <&ldo3_reg>;
 140         status = "okay";
 141
 142         thermistor-ap {
 143                 compatible = "murata,ncp03wf104";
 144                 pullup-uv = <1800000>;
 145                 pullup-ohm = <100000>;
 146                 pulldown-ohm = <0>;
 147                 io-channels = <&adc 0>;
 148         };
 149
 150         thermistor-battery {
 151                 compatible = "murata,ncp03wf104";
 152                 pullup-uv = <1800000>;
 153                 pullup-ohm = <100000>;
 154                 pulldown-ohm = <0>;
 155                 io-channels = <&adc 1>;
 156                 #thermal-sensor-cells = <0>;
 157         };
 158
 159         thermistor-charger {
 160                 compatible = "murata,ncp03wf104";
 161                 pullup-uv = <1800000>;
 162                 pullup-ohm = <100000>;
 163                 pulldown-ohm = <0>;
 164                 io-channels = <&adc 2>;
 165         };
 166 };
 167
 168 &bus_g2d_400 {
 169         devfreq-events = <&ppmu_event0_d0_general>, <&ppmu_event0_d1_general>;
 170         vdd-supply = <&buck4_reg>;
 171         exynos,saturation-ratio = <10>;
 172         status = "okay";
 173 };
 174
 175 &bus_g2d_266 {
 176         devfreq = <&bus_g2d_400>;
 177         status = "okay";
 178 };
 179
 180 &bus_gscl {
 181         devfreq = <&bus_g2d_400>;
 182         status = "okay";
 183 };
 184
 185 &bus_hevc {
 186         devfreq = <&bus_g2d_400>;
 187         status = "okay";
 188 };
 189
 190 &bus_jpeg {
 191         devfreq = <&bus_g2d_400>;
 192         status = "okay";
 193 };
 194
 195 &bus_mfc {
 196         devfreq = <&bus_g2d_400>;
 197         status = "okay";
 198 };
 199
 200 &bus_mscl {
 201         devfreq = <&bus_g2d_400>;
 202         status = "okay";
 203 };
 204
 205 &bus_noc0 {
 206         devfreq = <&bus_g2d_400>;
 207         status = "okay";
 208 };
 209
 210 &bus_noc1 {
 211         devfreq = <&bus_g2d_400>;
 212         status = "okay";
 213 };
 214
 215 &bus_noc2 {
 216         devfreq = <&bus_g2d_400>;
 217         status = "okay";
 218 };
 219
 220 &cmu_aud {
 221         assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>,
 222                 <&cmu_aud CLK_MOUT_SCLK_AUD_I2S>,
 223                 <&cmu_aud CLK_MOUT_SCLK_AUD_PCM>,
 224                 <&cmu_top CLK_MOUT_AUD_PLL>,
 225                 <&cmu_top CLK_MOUT_AUD_PLL_USER_T>,
 226                 <&cmu_top CLK_MOUT_SCLK_AUDIO0>,
 227                 <&cmu_top CLK_MOUT_SCLK_AUDIO1>,
 228                 <&cmu_top CLK_MOUT_SCLK_SPDIF>,
 229
 230                 <&cmu_aud CLK_DIV_AUD_CA5>,
 231                 <&cmu_aud CLK_DIV_ACLK_AUD>,
 232                 <&cmu_aud CLK_DIV_PCLK_DBG_AUD>,
 233                 <&cmu_aud CLK_DIV_SCLK_AUD_I2S>,
 234                 <&cmu_aud CLK_DIV_SCLK_AUD_PCM>,
 235                 <&cmu_aud CLK_DIV_SCLK_AUD_SLIMBUS>,
 236                 <&cmu_aud CLK_DIV_SCLK_AUD_UART>,
 237                 <&cmu_top CLK_DIV_SCLK_AUDIO0>,
 238                 <&cmu_top CLK_DIV_SCLK_AUDIO1>,
 239                 <&cmu_top CLK_DIV_SCLK_PCM1>,
 240                 <&cmu_top CLK_DIV_SCLK_I2S1>;
 241
 242         assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>,
 243                 <&cmu_aud CLK_MOUT_AUD_PLL_USER>,
 244                 <&cmu_aud CLK_MOUT_AUD_PLL_USER>,
 245                 <&cmu_top CLK_FOUT_AUD_PLL>,
 246                 <&cmu_top CLK_MOUT_AUD_PLL>,
 247                 <&cmu_top CLK_MOUT_AUD_PLL_USER_T>,
 248                 <&cmu_top CLK_MOUT_AUD_PLL_USER_T>,
 249                 <&cmu_top CLK_SCLK_AUDIO0>;
 250
 251         assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>,
 252                 <196608001>, <65536001>, <32768001>, <49152001>,
 253                 <2048001>, <24576001>, <196608001>,
 254                 <24576001>, <98304001>, <2048001>, <49152001>;
 255 };
 256
 257 &cmu_fsys {
 258         assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>,
 259                 <&cmu_top CLK_MOUT_SCLK_USBHOST30>,
 260                 <&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>,
 261                 <&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>,
 262                 <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>,
 263                 <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>,
 264                 <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>,
 265                 <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>,
 266                 <&cmu_top CLK_DIV_SCLK_USBDRD30>,
 267                 <&cmu_top CLK_DIV_SCLK_USBHOST30>;
 268         assigned-clock-parents = <&cmu_top CLK_MOUT_BUS_PLL_USER>,
 269                 <&cmu_top CLK_MOUT_BUS_PLL_USER>,
 270                 <&cmu_top CLK_SCLK_USBDRD30_FSYS>,
 271                 <&cmu_top CLK_SCLK_USBHOST30_FSYS>,
 272                 <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>,
 273                 <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>,
 274                 <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>,
 275                 <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>;
 276         assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>,
 277                                <66700000>, <66700000>;
 278 };
 279
 280 &cmu_gscl {
 281         assigned-clocks = <&cmu_gscl CLK_MOUT_ACLK_GSCL_111_USER>,
 282                           <&cmu_gscl CLK_MOUT_ACLK_GSCL_333_USER>;
 283         assigned-clock-parents = <&cmu_top CLK_ACLK_GSCL_111>,
 284                                  <&cmu_top CLK_ACLK_GSCL_333>;
 285 };
 286
 287 &cmu_mfc {
 288         assigned-clocks = <&cmu_mfc CLK_MOUT_ACLK_MFC_400_USER>;
 289         assigned-clock-parents = <&cmu_top CLK_ACLK_MFC_400>;
 290 };
 291
 292 &cmu_mif {
 293         assigned-clocks = <&cmu_mif CLK_MOUT_SCLK_DSD_A>, <&cmu_mif CLK_DIV_SCLK_DSD>;
 294         assigned-clock-parents = <&cmu_mif CLK_MOUT_MFC_PLL_DIV2>;
 295         assigned-clock-rates = <0>, <333000000>;
 296 };
 297
 298 &cmu_mscl {
 299         assigned-clocks = <&cmu_mscl CLK_MOUT_ACLK_MSCL_400_USER>,
 300                           <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
 301                           <&cmu_mscl CLK_MOUT_SCLK_JPEG>,
 302                           <&cmu_top CLK_MOUT_SCLK_JPEG_A>;
 303         assigned-clock-parents = <&cmu_top CLK_ACLK_MSCL_400>,
 304                                  <&cmu_top CLK_SCLK_JPEG_MSCL>,
 305                                  <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
 306                                  <&cmu_top CLK_MOUT_BUS_PLL_USER>;
 307 };
 308
 309 &cmu_top {
 310         assigned-clocks = <&cmu_top CLK_FOUT_AUD_PLL>;
 311         assigned-clock-rates = <196608001>;
 312 };
 313
 314 &cpu0 {
 315         cpu-supply = <&buck3_reg>;
 316 };
 317
 318 &cpu4 {
 319         cpu-supply = <&buck2_reg>;
 320 };
 321
 322 &decon {
 323         status = "okay";
 324 };
 325
 326 &decon_tv {
 327         status = "okay";
 328
 329         ports {
 330                 #address-cells = <1>;
 331                 #size-cells = <0>;
 332
 333                 port@0 {
 334                         reg = <0>;
 335                         tv_to_hdmi: endpoint {
 336                                 remote-endpoint = <&hdmi_to_tv>;
 337                         };
 338                 };
 339         };
 340 };
 341
 342 &dsi {
 343         status = "okay";
 344         vddcore-supply = <&ldo6_reg>;
 345         vddio-supply = <&ldo7_reg>;
 346         samsung,burst-clock-frequency = <512000000>;
 347         samsung,esc-clock-frequency = <16000000>;
 348         samsung,pll-clock-frequency = <24000000>;
 349         pinctrl-names = "default";
 350         pinctrl-0 = <&te_irq>;
 351 };
 352
 353 &gpu {
 354         mali-supply = <&buck6_reg>;
 355         status = "okay";
 356 };
 357
 358 &hdmi {
 359         hpd-gpios = <&gpa3 0 GPIO_ACTIVE_HIGH>;
 360         status = "okay";
 361         vdd-supply = <&ldo6_reg>;
 362         vdd_osc-supply = <&ldo7_reg>;
 363         vdd_pll-supply = <&ldo6_reg>;
 364
 365         ports {
 366                 #address-cells = <1>;
 367                 #size-cells = <0>;
 368
 369                 port@0 {
 370                         reg = <0>;
 371                         hdmi_to_tv: endpoint {
 372                                 remote-endpoint = <&tv_to_hdmi>;
 373                         };
 374                 };
 375
 376                 port@1 {
 377                         reg = <1>;
 378                         hdmi_to_mhl: endpoint {
 379                                 remote-endpoint = <&mhl_to_hdmi>;
 380                         };
 381                 };
 382         };
 383 };
 384
 385 &hsi2c_0 {
 386         status = "okay";
 387         clock-frequency = <2500000>;
 388
 389         s2mps13-pmic@66 {
 390                 compatible = "samsung,s2mps13-pmic";
 391                 interrupt-parent = <&gpa0>;
 392                 interrupts = <7 IRQ_TYPE_NONE>;
 393                 reg = <0x66>;
 394                 samsung,s2mps11-wrstbi-ground;
 395
 396                 s2mps13_osc: clocks {
 397                         compatible = "samsung,s2mps13-clk";
 398                         #clock-cells = <1>;
 399                         clock-output-names = "s2mps13_ap", "s2mps13_cp",
 400                                 "s2mps13_bt";
 401                 };
 402
 403                 regulators {
 404                         ldo1_reg: LDO1 {
 405                                 regulator-name = "VDD_ALIVE_0.9V_AP";
 406                                 regulator-min-microvolt = <900000>;
 407                                 regulator-max-microvolt = <900000>;
 408                                 regulator-always-on;
 409                         };
 410
 411                         ldo2_reg: LDO2 {
 412                                 regulator-name = "VDDQ_MMC2_2.8V_AP";
 413                                 regulator-min-microvolt = <2800000>;
 414                                 regulator-max-microvolt = <2800000>;
 415                                 regulator-always-on;
 416                                 regulator-state-mem {
 417                                         regulator-off-in-suspend;
 418                                 };
 419                         };
 420
 421                         ldo3_reg: LDO3 {
 422                                 regulator-name = "VDD1_E_1.8V_AP";
 423                                 regulator-min-microvolt = <1800000>;
 424                                 regulator-max-microvolt = <1800000>;
 425                                 regulator-always-on;
 426                         };
 427
 428                         ldo4_reg: LDO4 {
 429                                 regulator-name = "VDD10_MIF_PLL_1.0V_AP";
 430                                 regulator-min-microvolt = <1300000>;
 431                                 regulator-max-microvolt = <1300000>;
 432                                 regulator-always-on;
 433                                 regulator-state-mem {
 434                                         regulator-off-in-suspend;
 435                                 };
 436                         };
 437
 438                         ldo5_reg: LDO5 {
 439                                 regulator-name = "VDD10_DPLL_1.0V_AP";
 440                                 regulator-min-microvolt = <1000000>;
 441                                 regulator-max-microvolt = <1000000>;
 442                                 regulator-always-on;
 443                                 regulator-state-mem {
 444                                         regulator-off-in-suspend;
 445                                 };
 446                         };
 447
 448                         ldo6_reg: LDO6 {
 449                                 regulator-name = "VDD10_MIPI2L_1.0V_AP";
 450                                 regulator-min-microvolt = <1000000>;
 451                                 regulator-max-microvolt = <1000000>;
 452                                 regulator-state-mem {
 453                                         regulator-off-in-suspend;
 454                                 };
 455                         };
 456
 457                         ldo7_reg: LDO7 {
 458                                 regulator-name = "VDD18_MIPI2L_1.8V_AP";
 459                                 regulator-min-microvolt = <1800000>;
 460                                 regulator-max-microvolt = <1800000>;
 461                                 regulator-always-on;
 462                                 regulator-state-mem {
 463                                         regulator-off-in-suspend;
 464                                 };
 465                         };
 466
 467                         ldo8_reg: LDO8 {
 468                                 regulator-name = "VDD18_LLI_1.8V_AP";
 469                                 regulator-min-microvolt = <1800000>;
 470                                 regulator-max-microvolt = <1800000>;
 471                                 regulator-always-on;
 472                                 regulator-state-mem {
 473                                         regulator-off-in-suspend;
 474                                 };
 475                         };
 476
 477                         ldo9_reg: LDO9 {
 478                                 regulator-name = "VDD18_ABB_ETC_1.8V_AP";
 479                                 regulator-min-microvolt = <1800000>;
 480                                 regulator-max-microvolt = <1800000>;
 481                                 regulator-always-on;
 482                                 regulator-state-mem {
 483                                         regulator-off-in-suspend;
 484                                 };
 485                         };
 486
 487                         ldo10_reg: LDO10 {
 488                                 regulator-name = "VDD33_USB30_3.0V_AP";
 489                                 regulator-min-microvolt = <3000000>;
 490                                 regulator-max-microvolt = <3000000>;
 491                                 regulator-state-mem {
 492                                         regulator-off-in-suspend;
 493                                 };
 494                         };
 495
 496                         ldo11_reg: LDO11 {
 497                                 regulator-name = "VDD_INT_M_1.0V_AP";
 498                                 regulator-min-microvolt = <1000000>;
 499                                 regulator-max-microvolt = <1000000>;
 500                                 regulator-always-on;
 501                                 regulator-state-mem {
 502                                         regulator-off-in-suspend;
 503                                 };
 504                         };
 505
 506                         ldo12_reg: LDO12 {
 507                                 regulator-name = "VDD_KFC_M_1.1V_AP";
 508                                 regulator-min-microvolt = <800000>;
 509                                 regulator-max-microvolt = <1350000>;
 510                                 regulator-always-on;
 511                         };
 512
 513                         ldo13_reg: LDO13 {
 514                                 regulator-name = "VDD_G3D_M_0.95V_AP";
 515                                 regulator-min-microvolt = <950000>;
 516                                 regulator-max-microvolt = <950000>;
 517                                 regulator-always-on;
 518                                 regulator-state-mem {
 519                                         regulator-off-in-suspend;
 520                                 };
 521                         };
 522
 523                         ldo14_reg: LDO14 {
 524                                 regulator-name = "VDDQ_M1_LDO_1.2V_AP";
 525                                 regulator-min-microvolt = <1200000>;
 526                                 regulator-max-microvolt = <1200000>;
 527                                 regulator-always-on;
 528                                 regulator-state-mem {
 529                                         regulator-off-in-suspend;
 530                                 };
 531                         };
 532
 533                         ldo15_reg: LDO15 {
 534                                 regulator-name = "VDDQ_M2_LDO_1.2V_AP";
 535                                 regulator-min-microvolt = <1200000>;
 536                                 regulator-max-microvolt = <1200000>;
 537                                 regulator-always-on;
 538                                 regulator-state-mem {
 539                                         regulator-off-in-suspend;
 540                                 };
 541                         };
 542
 543                         ldo16_reg: LDO16 {
 544                                 regulator-name = "VDDQ_EFUSE";
 545                                 regulator-min-microvolt = <1400000>;
 546                                 regulator-max-microvolt = <3400000>;
 547                                 regulator-always-on;
 548                         };
 549
 550                         ldo17_reg: LDO17 {
 551                                 regulator-name = "V_TFLASH_2.8V_AP";
 552                                 regulator-min-microvolt = <2800000>;
 553                                 regulator-max-microvolt = <2800000>;
 554                         };
 555
 556                         ldo18_reg: LDO18 {
 557                                 regulator-name = "V_CODEC_1.8V_AP";
 558                                 regulator-min-microvolt = <1800000>;
 559                                 regulator-max-microvolt = <1800000>;
 560                         };
 561
 562                         ldo19_reg: LDO19 {
 563                                 regulator-name = "VDDA_1.8V_COMP";
 564                                 regulator-min-microvolt = <1800000>;
 565                                 regulator-max-microvolt = <1800000>;
 566                                 regulator-always-on;
 567                         };
 568
 569                         ldo20_reg: LDO20 {
 570                                 regulator-name = "VCC_2.8V_AP";
 571                                 regulator-min-microvolt = <2800000>;
 572                                 regulator-max-microvolt = <2800000>;
 573                                 regulator-always-on;
 574                         };
 575
 576                         ldo21_reg: LDO21 {
 577                                 regulator-name = "VT_CAM_1.8V";
 578                                 regulator-min-microvolt = <1800000>;
 579                                 regulator-max-microvolt = <1800000>;
 580                         };
 581
 582                         ldo22_reg: LDO22 {
 583                                 regulator-name = "CAM_IO_1.8V_AP";
 584                                 regulator-min-microvolt = <1800000>;
 585                                 regulator-max-microvolt = <1800000>;
 586                         };
 587
 588                         ldo23_reg: LDO23 {
 589                                 regulator-name = "CAM_SEN_CORE_1.05V_AP";
 590                                 regulator-min-microvolt = <1050000>;
 591                                 regulator-max-microvolt = <1050000>;
 592                         };
 593
 594                         ldo24_reg: LDO24 {
 595                                 regulator-name = "VT_CAM_1.2V";
 596                                 regulator-min-microvolt = <1200000>;
 597                                 regulator-max-microvolt = <1200000>;
 598                         };
 599
 600                         ldo25_reg: LDO25 {
 601                                 regulator-name = "UNUSED_LDO25";
 602                                 regulator-min-microvolt = <2800000>;
 603                                 regulator-max-microvolt = <2800000>;
 604                         };
 605
 606                         ldo26_reg: LDO26 {
 607                                 regulator-name = "CAM_AF_2.8V_AP";
 608                                 regulator-min-microvolt = <2800000>;
 609                                 regulator-max-microvolt = <2800000>;
 610                         };
 611
 612                         ldo27_reg: LDO27 {
 613                                 regulator-name = "VCC_3.0V_LCD_AP";
 614                                 regulator-min-microvolt = <3000000>;
 615                                 regulator-max-microvolt = <3000000>;
 616                         };
 617
 618                         ldo28_reg: LDO28 {
 619                                 regulator-name = "VCC_1.8V_LCD_AP";
 620                                 regulator-min-microvolt = <1800000>;
 621                                 regulator-max-microvolt = <1800000>;
 622                         };
 623
 624                         ldo29_reg: LDO29 {
 625                                 regulator-name = "VT_CAM_2.8V";
 626                                 regulator-min-microvolt = <3000000>;
 627                                 regulator-max-microvolt = <3000000>;
 628                         };
 629
 630                         ldo30_reg: LDO30 {
 631                                 regulator-name = "TSP_AVDD_3.3V_AP";
 632                                 regulator-min-microvolt = <3300000>;
 633                                 regulator-max-microvolt = <3300000>;
 634                         };
 635
 636                         ldo31_reg: LDO31 {
 637                                 /*
 638                                  * LDO31 differs from target to target,
 639                                  * its definition is in the .dts
 640                                  */
 641                         };
 642
 643                         ldo32_reg: LDO32 {
 644                                 regulator-name = "VTOUCH_1.8V_AP";
 645                                 regulator-min-microvolt = <1800000>;
 646                                 regulator-max-microvolt = <1800000>;
 647                         };
 648
 649                         ldo33_reg: LDO33 {
 650                                 regulator-name = "VTOUCH_LED_3.3V";
 651                                 regulator-min-microvolt = <2500000>;
 652                                 regulator-max-microvolt = <3300000>;
 653                                 regulator-ramp-delay = <12500>;
 654                         };
 655
 656                         ldo34_reg: LDO34 {
 657                                 regulator-name = "VCC_1.8V_MHL_AP";
 658                                 regulator-min-microvolt = <1000000>;
 659                                 regulator-max-microvolt = <2100000>;
 660                         };
 661
 662                         ldo35_reg: LDO35 {
 663                                 regulator-name = "OIS_VM_2.8V";
 664                                 regulator-min-microvolt = <1800000>;
 665                                 regulator-max-microvolt = <2800000>;
 666                         };
 667
 668                         ldo36_reg: LDO36 {
 669                                 regulator-name = "VSIL_1.0V";
 670                                 regulator-min-microvolt = <1000000>;
 671                                 regulator-max-microvolt = <1000000>;
 672                         };
 673
 674                         ldo37_reg: LDO37 {
 675                                 regulator-name = "VF_1.8V";
 676                                 regulator-min-microvolt = <1800000>;
 677                                 regulator-max-microvolt = <1800000>;
 678                         };
 679
 680                         ldo38_reg: LDO38 {
 681                                 /*
 682                                  * LDO38 differs from target to target,
 683                                  * its definition is in the .dts
 684                                  */
 685                         };
 686
 687                         ldo39_reg: LDO39 {
 688                                 regulator-name = "V_HRM_1.8V";
 689                                 regulator-min-microvolt = <1800000>;
 690                                 regulator-max-microvolt = <1800000>;
 691                         };
 692
 693                         ldo40_reg: LDO40 {
 694                                 regulator-name = "V_HRM_3.3V";
 695                                 regulator-min-microvolt = <3300000>;
 696                                 regulator-max-microvolt = <3300000>;
 697                         };
 698
 699                         buck1_reg: BUCK1 {
 700                                 regulator-name = "VDD_MIF_0.9V_AP";
 701                                 regulator-min-microvolt = <600000>;
 702                                 regulator-max-microvolt = <1500000>;
 703                                 regulator-always-on;
 704                                 regulator-state-mem {
 705                                         regulator-off-in-suspend;
 706                                 };
 707                         };
 708
 709                         buck2_reg: BUCK2 {
 710                                 regulator-name = "VDD_EGL_1.0V_AP";
 711                                 regulator-min-microvolt = <900000>;
 712                                 regulator-max-microvolt = <1300000>;
 713                                 regulator-always-on;
 714                                 regulator-state-mem {
 715                                         regulator-off-in-suspend;
 716                                 };
 717                         };
 718
 719                         buck3_reg: BUCK3 {
 720                                 regulator-name = "VDD_KFC_1.0V_AP";
 721                                 regulator-min-microvolt = <800000>;
 722                                 regulator-max-microvolt = <1200000>;
 723                                 regulator-always-on;
 724                                 regulator-state-mem {
 725                                         regulator-off-in-suspend;
 726                                 };
 727                         };
 728
 729                         buck4_reg: BUCK4 {
 730                                 regulator-name = "VDD_INT_0.95V_AP";
 731                                 regulator-min-microvolt = <600000>;
 732                                 regulator-max-microvolt = <1500000>;
 733                                 regulator-always-on;
 734                                 regulator-state-mem {
 735                                         regulator-off-in-suspend;
 736                                 };
 737                         };
 738
 739                         buck5_reg: BUCK5 {
 740                                 regulator-name = "VDD_DISP_CAM0_0.9V_AP";
 741                                 regulator-min-microvolt = <600000>;
 742                                 regulator-max-microvolt = <1500000>;
 743                                 regulator-always-on;
 744                                 regulator-state-mem {
 745                                         regulator-off-in-suspend;
 746                                 };
 747                         };
 748
 749                         buck6_reg: BUCK6 {
 750                                 regulator-name = "VDD_G3D_0.9V_AP";
 751                                 regulator-min-microvolt = <600000>;
 752                                 regulator-max-microvolt = <1500000>;
 753                                 regulator-always-on;
 754                                 regulator-state-mem {
 755                                         regulator-off-in-suspend;
 756                                 };
 757                         };
 758
 759                         buck7_reg: BUCK7 {
 760                                 regulator-name = "VDD_MEM1_1.2V_AP";
 761                                 regulator-min-microvolt = <1200000>;
 762                                 regulator-max-microvolt = <1200000>;
 763                                 regulator-always-on;
 764                         };
 765
 766                         buck8_reg: BUCK8 {
 767                                 regulator-name = "VDD_LLDO_1.35V_AP";
 768                                 regulator-min-microvolt = <1350000>;
 769                                 regulator-max-microvolt = <3300000>;
 770                                 regulator-always-on;
 771                         };
 772
 773                         buck9_reg: BUCK9 {
 774                                 regulator-name = "VDD_MLDO_2.0V_AP";
 775                                 regulator-min-microvolt = <1350000>;
 776                                 regulator-max-microvolt = <3300000>;
 777                                 regulator-always-on;
 778                         };
 779
 780                         buck10_reg: BUCK10 {
 781                                 regulator-name = "vdd_mem2";
 782                                 regulator-min-microvolt = <550000>;
 783                                 regulator-max-microvolt = <1500000>;
 784                                 regulator-always-on;
 785                         };
 786                 };
 787         };
 788 };
 789
 790 &hsi2c_4 {
 791         status = "okay";
 792
 793         s3fwrn5: nfc@27 {
 794                 compatible = "samsung,s3fwrn5-i2c";
 795                 reg = <0x27>;
 796                 interrupt-parent = <&gpa1>;
 797                 interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
 798                 s3fwrn5,en-gpios = <&gpf1 4 GPIO_ACTIVE_HIGH>;
 799                 s3fwrn5,fw-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>;
 800         };
 801 };
 802
 803 &hsi2c_5 {
 804         status = "okay";
 805
 806         stmfts: touchscreen@49 {
 807                 compatible = "st,stmfts";
 808                 reg = <0x49>;
 809                 interrupt-parent = <&gpa1>;
 810                 interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 811                 avdd-supply = <&ldo30_reg>;
 812                 vdd-supply = <&ldo31_reg>;
 813         };
 814 };
 815
 816 &hsi2c_7 {
 817         status = "okay";
 818         clock-frequency = <1000000>;
 819
 820         sii8620@39 {
 821                 reg = <0x39>;
 822                 compatible = "sil,sii8620";
 823                 cvcc10-supply = <&ldo36_reg>;
 824                 iovcc18-supply = <&ldo34_reg>;
 825                 interrupt-parent = <&gpf0>;
 826                 interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
 827                 reset-gpios = <&gpv7 0 GPIO_ACTIVE_LOW>;
 828                 clocks = <&pmu_system_controller 0>;
 829                 clock-names = "xtal";
 830
 831                 ports {
 832                         #address-cells = <1>;
 833                         #size-cells = <0>;
 834
 835                         port@0 {
 836                                 reg = <0>;
 837                                 mhl_to_hdmi: endpoint {
 838                                         remote-endpoint = <&hdmi_to_mhl>;
 839                                 };
 840                         };
 841
 842                         port@1 {
 843                                 reg = <1>;
 844                                 mhl_to_musb_con: endpoint {
 845                                         remote-endpoint = <&musb_con_to_mhl>;
 846                                 };
 847                         };
 848                 };
 849         };
 850 };
 851
 852 &hsi2c_8 {
 853         status = "okay";
 854
 855         max77843@66 {
 856                 compatible = "maxim,max77843";
 857                 interrupt-parent = <&gpa1>;
 858                 interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
 859                 reg = <0x66>;
 860
 861                 muic: max77843-muic {
 862                         compatible = "maxim,max77843-muic";
 863
 864                         musb_con: musb_connector {
 865                                 compatible = "samsung,usb-connector-11pin",
 866                                              "usb-b-connector";
 867                                 label = "micro-USB";
 868                                 type = "micro";
 869
 870                                 ports {
 871                                         #address-cells = <1>;
 872                                         #size-cells = <0>;
 873
 874                                         port@3 {
 875                                                 reg = <3>;
 876                                                 musb_con_to_mhl: endpoint {
 877                                                         remote-endpoint = <&mhl_to_musb_con>;
 878                                                 };
 879                                         };
 880                                 };
 881                         };
 882
 883                         ports {
 884                                 port {
 885                                         muic_to_usb: endpoint {
 886                                                 remote-endpoint = <&usb_to_muic>;
 887                                         };
 888                                 };
 889                         };
 890                 };
 891
 892                 regulators {
 893                         compatible = "maxim,max77843-regulator";
 894                         safeout1_reg: SAFEOUT1 {
 895                                 regulator-name = "SAFEOUT1";
 896                                 regulator-min-microvolt = <3300000>;
 897                                 regulator-max-microvolt = <4950000>;
 898                         };
 899
 900                         safeout2_reg: SAFEOUT2 {
 901                                 regulator-name = "SAFEOUT2";
 902                                 regulator-min-microvolt = <3300000>;
 903                                 regulator-max-microvolt = <4950000>;
 904                         };
 905
 906                         charger_reg: CHARGER {
 907                                 regulator-name = "CHARGER";
 908                                 regulator-min-microamp = <100000>;
 909                                 regulator-max-microamp = <3150000>;
 910                         };
 911                 };
 912
 913                 haptic: max77843-haptic {
 914                         compatible = "maxim,max77843-haptic";
 915                         haptic-supply = <&ldo38_reg>;
 916                         pwms = <&pwm 0 33670 0>;
 917                         pwm-names = "haptic";
 918                 };
 919         };
 920 };
 921
 922 &hsi2c_11 {
 923         status = "okay";
 924 };
 925
 926 &i2s0 {
 927         status = "okay";
 928 };
 929
 930 &i2s1 {
 931         assigned-clocks = <&i2s1 CLK_I2S_RCLK_SRC>;
 932         assigned-clock-parents = <&cmu_peric CLK_SCLK_I2S1>;
 933         status = "okay";
 934 };
 935
 936 &mshc_0 {
 937         status = "okay";
 938         mmc-hs200-1_8v;
 939         mmc-hs400-1_8v;
 940         cap-mmc-highspeed;
 941         non-removable;
 942         card-detect-delay = <200>;
 943         samsung,dw-mshc-ciu-div = <3>;
 944         samsung,dw-mshc-sdr-timing = <0 4>;
 945         samsung,dw-mshc-ddr-timing = <0 2>;
 946         samsung,dw-mshc-hs400-timing = <0 3>;
 947         samsung,read-strobe-delay = <90>;
 948         fifo-depth = <0x80>;
 949         pinctrl-names = "default";
 950         pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4
 951                         &sd0_bus8 &sd0_rdqs>;
 952         bus-width = <8>;
 953         assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>;
 954         assigned-clock-rates = <800000000>;
 955 };
 956
 957 &mshc_2 {
 958         status = "okay";
 959         cap-sd-highspeed;
 960         disable-wp;
 961         cd-gpios = <&gpa2 4 GPIO_ACTIVE_LOW>;
 962         card-detect-delay = <200>;
 963         samsung,dw-mshc-ciu-div = <3>;
 964         samsung,dw-mshc-sdr-timing = <0 4>;
 965         samsung,dw-mshc-ddr-timing = <0 2>;
 966         fifo-depth = <0x80>;
 967         pinctrl-names = "default";
 968         pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>;
 969         bus-width = <4>;
 970 };
 971
 972 &ppmu_d0_general {
 973         status = "okay";
 974         events {
 975                 ppmu_event0_d0_general: ppmu-event0-d0-general {
 976                         event-name = "ppmu-event0-d0-general";
 977                 };
 978         };
 979 };
 980
 981 &ppmu_d1_general {
 982         status = "okay";
 983         events {
 984                 ppmu_event0_d1_general: ppmu-event0-d1-general {
 985                        event-name = "ppmu-event0-d1-general";
 986                };
 987        };
 988 };
 989
 990 &pinctrl_alive {
 991         pinctrl-names = "default";
 992         pinctrl-0 = <&initial_alive>;
 993
 994         initial_alive: initial-state {
 995                 PIN(INPUT, gpa0-0, DOWN, FAST_SR1);
 996                 PIN(INPUT, gpa0-1, NONE, FAST_SR1);
 997                 PIN(INPUT, gpa0-2, DOWN, FAST_SR1);
 998                 PIN(INPUT, gpa0-3, NONE, FAST_SR1);
 999                 PIN(INPUT, gpa0-4, NONE, FAST_SR1);
1000                 PIN(INPUT, gpa0-5, DOWN, FAST_SR1);
1001                 PIN(INPUT, gpa0-6, NONE, FAST_SR1);
1002                 PIN(INPUT, gpa0-7, NONE, FAST_SR1);
1003
1004                 PIN(INPUT, gpa1-0, UP, FAST_SR1);
1005                 PIN(INPUT, gpa1-1, UP, FAST_SR1);
1006                 PIN(INPUT, gpa1-2, NONE, FAST_SR1);
1007                 PIN(INPUT, gpa1-3, DOWN, FAST_SR1);
1008                 PIN(INPUT, gpa1-4, DOWN, FAST_SR1);
1009                 PIN(INPUT, gpa1-5, NONE, FAST_SR1);
1010                 PIN(INPUT, gpa1-6, NONE, FAST_SR1);
1011                 PIN(INPUT, gpa1-7, NONE, FAST_SR1);
1012
1013                 PIN(INPUT, gpa2-0, NONE, FAST_SR1);
1014                 PIN(INPUT, gpa2-1, NONE, FAST_SR1);
1015                 PIN(INPUT, gpa2-2, NONE, FAST_SR1);
1016                 PIN(INPUT, gpa2-3, DOWN, FAST_SR1);
1017                 PIN(INPUT, gpa2-4, NONE, FAST_SR1);
1018                 PIN(INPUT, gpa2-5, DOWN, FAST_SR1);
1019                 PIN(INPUT, gpa2-6, DOWN, FAST_SR1);
1020                 PIN(INPUT, gpa2-7, NONE, FAST_SR1);
1021
1022                 PIN(INPUT, gpa3-0, DOWN, FAST_SR1);
1023                 PIN(INPUT, gpa3-1, DOWN, FAST_SR1);
1024                 PIN(INPUT, gpa3-2, NONE, FAST_SR1);
1025                 PIN(INPUT, gpa3-3, DOWN, FAST_SR1);
1026                 PIN(INPUT, gpa3-4, NONE, FAST_SR1);
1027                 PIN(INPUT, gpa3-5, DOWN, FAST_SR1);
1028                 PIN(INPUT, gpa3-6, DOWN, FAST_SR1);
1029                 PIN(INPUT, gpa3-7, DOWN, FAST_SR1);
1030
1031                 PIN(INPUT, gpf1-0, NONE, FAST_SR1);
1032                 PIN(INPUT, gpf1-1, NONE, FAST_SR1);
1033                 PIN(INPUT, gpf1-2, DOWN, FAST_SR1);
1034                 PIN(INPUT, gpf1-4, UP, FAST_SR1);
1035                 PIN(OUTPUT, gpf1-5, NONE, FAST_SR1);
1036                 PIN(INPUT, gpf1-6, DOWN, FAST_SR1);
1037                 PIN(INPUT, gpf1-7, DOWN, FAST_SR1);
1038
1039                 PIN(INPUT, gpf2-0, DOWN, FAST_SR1);
1040                 PIN(INPUT, gpf2-1, DOWN, FAST_SR1);
1041                 PIN(INPUT, gpf2-2, DOWN, FAST_SR1);
1042                 PIN(INPUT, gpf2-3, DOWN, FAST_SR1);
1043
1044                 PIN(INPUT, gpf3-0, DOWN, FAST_SR1);
1045                 PIN(INPUT, gpf3-1, DOWN, FAST_SR1);
1046                 PIN(INPUT, gpf3-2, NONE, FAST_SR1);
1047                 PIN(INPUT, gpf3-3, DOWN, FAST_SR1);
1048
1049                 PIN(INPUT, gpf4-0, DOWN, FAST_SR1);
1050                 PIN(INPUT, gpf4-1, DOWN, FAST_SR1);
1051                 PIN(INPUT, gpf4-2, DOWN, FAST_SR1);
1052                 PIN(INPUT, gpf4-3, DOWN, FAST_SR1);
1053                 PIN(INPUT, gpf4-4, DOWN, FAST_SR1);
1054                 PIN(INPUT, gpf4-5, DOWN, FAST_SR1);
1055                 PIN(INPUT, gpf4-6, DOWN, FAST_SR1);
1056                 PIN(INPUT, gpf4-7, DOWN, FAST_SR1);
1057
1058                 PIN(INPUT, gpf5-0, DOWN, FAST_SR1);
1059                 PIN(INPUT, gpf5-1, DOWN, FAST_SR1);
1060                 PIN(INPUT, gpf5-2, DOWN, FAST_SR1);
1061                 PIN(INPUT, gpf5-3, DOWN, FAST_SR1);
1062                 PIN(OUTPUT, gpf5-4, NONE, FAST_SR1);
1063                 PIN(INPUT, gpf5-5, DOWN, FAST_SR1);
1064                 PIN(INPUT, gpf5-6, DOWN, FAST_SR1);
1065                 PIN(INPUT, gpf5-7, DOWN, FAST_SR1);
1066         };
1067
1068         te_irq: te_irq {
1069                 samsung,pins = "gpf1-3";
1070                 samsung,pin-function = <0xf>;
1071         };
1072 };
1073
1074 &pinctrl_cpif {
1075         pinctrl-names = "default";
1076         pinctrl-0 = <&initial_cpif>;
1077
1078         initial_cpif: initial-state {
1079                 PIN(INPUT, gpv6-0, DOWN, FAST_SR1);
1080                 PIN(INPUT, gpv6-1, DOWN, FAST_SR1);
1081         };
1082 };
1083
1084 &pinctrl_ese {
1085         pinctrl-names = "default";
1086         pinctrl-0 = <&initial_ese>;
1087
1088         initial_ese: initial-state {
1089                 PIN(INPUT, gpj2-0, DOWN, FAST_SR1);
1090                 PIN(INPUT, gpj2-1, DOWN, FAST_SR1);
1091                 PIN(INPUT, gpj2-2, DOWN, FAST_SR1);
1092         };
1093 };
1094
1095 &pinctrl_fsys {
1096         pinctrl-names = "default";
1097         pinctrl-0 = <&initial_fsys>;
1098
1099         initial_fsys: initial-state {
1100                 PIN(INPUT, gpr3-0, NONE, FAST_SR1);
1101                 PIN(INPUT, gpr3-1, DOWN, FAST_SR1);
1102                 PIN(INPUT, gpr3-2, DOWN, FAST_SR1);
1103                 PIN(INPUT, gpr3-3, DOWN, FAST_SR1);
1104                 PIN(INPUT, gpr3-7, NONE, FAST_SR1);
1105         };
1106 };
1107
1108 &pinctrl_imem {
1109         pinctrl-names = "default";
1110         pinctrl-0 = <&initial_imem>;
1111
1112         initial_imem: initial-state {
1113                 PIN(INPUT, gpf0-0, UP, FAST_SR1);
1114                 PIN(INPUT, gpf0-1, UP, FAST_SR1);
1115                 PIN(INPUT, gpf0-2, DOWN, FAST_SR1);
1116                 PIN(INPUT, gpf0-3, UP, FAST_SR1);
1117                 PIN(INPUT, gpf0-4, DOWN, FAST_SR1);
1118                 PIN(INPUT, gpf0-5, NONE, FAST_SR1);
1119                 PIN(INPUT, gpf0-6, DOWN, FAST_SR1);
1120                 PIN(INPUT, gpf0-7, UP, FAST_SR1);
1121         };
1122 };
1123
1124 &pinctrl_nfc {
1125         pinctrl-names = "default";
1126         pinctrl-0 = <&initial_nfc>;
1127
1128         initial_nfc: initial-state {
1129                 PIN(INPUT, gpj0-2, DOWN, FAST_SR1);
1130         };
1131 };
1132
1133 &pinctrl_peric {
1134         pinctrl-names = "default";
1135         pinctrl-0 = <&initial_peric>;
1136
1137         initial_peric: initial-state {
1138                 PIN(INPUT, gpv7-0, DOWN, FAST_SR1);
1139                 PIN(INPUT, gpv7-1, DOWN, FAST_SR1);
1140                 PIN(INPUT, gpv7-2, NONE, FAST_SR1);
1141                 PIN(INPUT, gpv7-3, DOWN, FAST_SR1);
1142                 PIN(INPUT, gpv7-4, DOWN, FAST_SR1);
1143                 PIN(INPUT, gpv7-5, DOWN, FAST_SR1);
1144
1145                 PIN(INPUT, gpb0-4, DOWN, FAST_SR1);
1146
1147                 PIN(INPUT, gpc0-2, DOWN, FAST_SR1);
1148                 PIN(INPUT, gpc0-5, DOWN, FAST_SR1);
1149                 PIN(INPUT, gpc0-7, DOWN, FAST_SR1);
1150
1151                 PIN(INPUT, gpc1-1, DOWN, FAST_SR1);
1152
1153                 PIN(INPUT, gpc3-4, NONE, FAST_SR1);
1154                 PIN(INPUT, gpc3-5, NONE, FAST_SR1);
1155                 PIN(INPUT, gpc3-6, NONE, FAST_SR1);
1156                 PIN(INPUT, gpc3-7, NONE, FAST_SR1);
1157
1158                 PIN(OUTPUT, gpg0-0, NONE, FAST_SR1);
1159                 PIN(2, gpg0-1, DOWN, FAST_SR1);
1160
1161                 PIN(INPUT, gpd2-5, DOWN, FAST_SR1);
1162
1163                 PIN(INPUT, gpd4-0, NONE, FAST_SR1);
1164                 PIN(INPUT, gpd4-1, DOWN, FAST_SR1);
1165                 PIN(INPUT, gpd4-2, DOWN, FAST_SR1);
1166                 PIN(INPUT, gpd4-3, DOWN, FAST_SR1);
1167                 PIN(INPUT, gpd4-4, DOWN, FAST_SR1);
1168
1169                 PIN(INPUT, gpd6-3, DOWN, FAST_SR1);
1170
1171                 PIN(INPUT, gpd8-1, UP, FAST_SR1);
1172
1173                 PIN(INPUT, gpg1-0, DOWN, FAST_SR1);
1174                 PIN(INPUT, gpg1-1, DOWN, FAST_SR1);
1175                 PIN(INPUT, gpg1-2, DOWN, FAST_SR1);
1176                 PIN(INPUT, gpg1-3, DOWN, FAST_SR1);
1177                 PIN(INPUT, gpg1-4, DOWN, FAST_SR1);
1178
1179                 PIN(INPUT, gpg2-0, DOWN, FAST_SR1);
1180                 PIN(INPUT, gpg2-1, DOWN, FAST_SR1);
1181
1182                 PIN(INPUT, gpg3-0, DOWN, FAST_SR1);
1183                 PIN(INPUT, gpg3-1, DOWN, FAST_SR1);
1184                 PIN(INPUT, gpg3-5, DOWN, FAST_SR1);
1185         };
1186 };
1187
1188 &pinctrl_touch {
1189         pinctrl-names = "default";
1190         pinctrl-0 = <&initial_touch>;
1191
1192         initial_touch: initial-state {
1193                 PIN(INPUT, gpj1-2, DOWN, FAST_SR1);
1194         };
1195 };
1196
1197 &pwm {
1198         pinctrl-0 = <&pwm0_out>;
1199         pinctrl-names = "default";
1200         status = "okay";
1201 };
1202
1203 &mic {
1204         status = "okay";
1205 };
1206
1207 &pmu_system_controller {
1208         assigned-clocks = <&pmu_system_controller 0>;
1209         assigned-clock-parents = <&xxti>;
1210 };
1211
1212 &serial_1 {
1213         status = "okay";
1214 };
1215
1216 &serial_3 {
1217         status = "okay";
1218
1219         bluetooth {
1220                 compatible = "brcm,bcm43438-bt";
1221                 max-speed = <3000000>;
1222                 shutdown-gpios = <&gpd4 0 GPIO_ACTIVE_HIGH>;
1223                 device-wakeup-gpios = <&gpr3 7 GPIO_ACTIVE_HIGH>;
1224                 host-wakeup-gpios = <&gpa2 2 GPIO_ACTIVE_HIGH>;
1225                 clocks = <&s2mps13_osc S2MPS11_CLK_BT>;
1226                 clock-names = "extclk";
1227         };
1228 };
1229
1230 &spi_1 {
1231         cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;
1232         status = "okay";
1233
1234         wm5110: wm5110-codec@0 {
1235                 compatible = "wlf,wm5110";
1236                 reg = <0x0>;
1237                 spi-max-frequency = <20000000>;
1238                 interrupt-parent = <&gpa0>;
1239                 interrupts = <4 IRQ_TYPE_NONE>;
1240                 clocks = <&pmu_system_controller 0>,
1241                         <&s2mps13_osc S2MPS11_CLK_BT>;
1242                 clock-names = "mclk1", "mclk2";
1243
1244                 gpio-controller;
1245                 #gpio-cells = <2>;
1246
1247                 wlf,micd-detect-debounce = <300>;
1248                 wlf,micd-bias-start-time = <0x1>;
1249                 wlf,micd-rate = <0x7>;
1250                 wlf,micd-dbtime = <0x1>;
1251                 wlf,micd-force-micbias;
1252                 wlf,micd-configs = <0x0 1 0>;
1253                 wlf,hpdet-channel = <1>;
1254                 wlf,gpsw = <0x1>;
1255                 wlf,inmode = <2 0 2 0>;
1256
1257                 wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>;
1258                 wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>;
1259
1260                 /* core supplies */
1261                 AVDD-supply = <&ldo18_reg>;
1262                 DBVDD1-supply = <&ldo18_reg>;
1263                 CPVDD-supply = <&ldo18_reg>;
1264                 DBVDD2-supply = <&ldo18_reg>;
1265                 DBVDD3-supply = <&ldo18_reg>;
1266
1267                 controller-data {
1268                         samsung,spi-feedback-delay = <0>;
1269                 };
1270         };
1271 };
1272
1273 &spi_3 {
1274         status = "okay";
1275         no-cs-readback;
1276
1277         irled@0 {
1278                 compatible = "ir-spi-led";
1279                 reg = <0x0>;
1280                 spi-max-frequency = <5000000>;
1281                 power-supply = <&irda_regulator>;
1282                 duty-cycle = <60>;
1283                 led-active-low;
1284
1285                 controller-data {
1286                         samsung,spi-feedback-delay = <0>;
1287                 };
1288         };
1289 };
1290
1291 &timer {
1292         clock-frequency = <24000000>;
1293 };
1294
1295 &tmu_atlas0 {
1296         vtmu-supply = <&ldo3_reg>;
1297         status = "okay";
1298 };
1299
1300 &tmu_apollo {
1301         vtmu-supply = <&ldo3_reg>;
1302         status = "okay";
1303 };
1304
1305 &tmu_g3d {
1306         vtmu-supply = <&ldo3_reg>;
1307         status = "okay";
1308 };
1309
1310 &usbdrd30 {
1311         vdd33-supply = <&ldo10_reg>;
1312         vdd10-supply = <&ldo6_reg>;
1313         status = "okay";
1314 };
1315
1316 &usbdrd_dwc3 {
1317         dr_mode = "otg";
1318 };
1319
1320 &usbdrd30_phy {
1321         vbus-supply = <&safeout1_reg>;
1322         status = "okay";
1323
1324         port {
1325                 usb_to_muic: endpoint {
1326                         remote-endpoint = <&muic_to_usb>;
1327                 };
1328         };
1329 };
1330
1331 &xxti {
1332         clock-frequency = <24000000>;
1333 };