Linux-libre 3.5.4-gnu1
[librecmc/linux-libre.git] / arch / arm / mach-tegra / platsmp.c
1 /*
2  *  linux/arch/arm/mach-tegra/platsmp.c
3  *
4  *  Copyright (C) 2002 ARM Ltd.
5  *  All Rights Reserved
6  *
7  *  Copyright (C) 2009 Palm
8  *  All Rights Reserved
9  *
10  * This program is free software; you can redistribute it and/or modify
11  * it under the terms of the GNU General Public License version 2 as
12  * published by the Free Software Foundation.
13  */
14 #include <linux/init.h>
15 #include <linux/errno.h>
16 #include <linux/delay.h>
17 #include <linux/device.h>
18 #include <linux/jiffies.h>
19 #include <linux/smp.h>
20 #include <linux/io.h>
21
22 #include <asm/cacheflush.h>
23 #include <asm/hardware/gic.h>
24 #include <asm/mach-types.h>
25 #include <asm/smp_scu.h>
26
27 #include <mach/clk.h>
28 #include <mach/iomap.h>
29 #include <mach/powergate.h>
30
31 #include "fuse.h"
32 #include "flowctrl.h"
33 #include "reset.h"
34
35 extern void tegra_secondary_startup(void);
36
37 static void __iomem *scu_base = IO_ADDRESS(TEGRA_ARM_PERIF_BASE);
38
39 #define EVP_CPU_RESET_VECTOR \
40         (IO_ADDRESS(TEGRA_EXCEPTION_VECTORS_BASE) + 0x100)
41 #define CLK_RST_CONTROLLER_CLK_CPU_CMPLX \
42         (IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x4c)
43 #define CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET \
44         (IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x340)
45 #define CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR \
46         (IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x344)
47 #define CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR \
48         (IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x34c)
49
50 #define CPU_CLOCK(cpu)  (0x1<<(8+cpu))
51 #define CPU_RESET(cpu)  (0x1111ul<<(cpu))
52
53 void __cpuinit platform_secondary_init(unsigned int cpu)
54 {
55         /*
56          * if any interrupts are already enabled for the primary
57          * core (e.g. timer irq), then they will not have been enabled
58          * for us: do so
59          */
60         gic_secondary_init(0);
61
62 }
63
64 static int tegra20_power_up_cpu(unsigned int cpu)
65 {
66         u32 reg;
67
68         /* Enable the CPU clock. */
69         reg = readl(CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
70         writel(reg & ~CPU_CLOCK(cpu), CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
71         barrier();
72         reg = readl(CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
73
74         /* Clear flow controller CSR. */
75         flowctrl_write_cpu_csr(cpu, 0);
76
77         return 0;
78 }
79
80 static int tegra30_power_up_cpu(unsigned int cpu)
81 {
82         u32 reg;
83         int ret, pwrgateid;
84         unsigned long timeout;
85
86         pwrgateid = tegra_cpu_powergate_id(cpu);
87         if (pwrgateid < 0)
88                 return pwrgateid;
89
90         /* If this is the first boot, toggle powergates directly. */
91         if (!tegra_powergate_is_powered(pwrgateid)) {
92                 ret = tegra_powergate_power_on(pwrgateid);
93                 if (ret)
94                         return ret;
95
96                 /* Wait for the power to come up. */
97                 timeout = jiffies + 10*HZ;
98                 while (tegra_powergate_is_powered(pwrgateid)) {
99                         if (time_after(jiffies, timeout))
100                                 return -ETIMEDOUT;
101                         udelay(10);
102                 }
103         }
104
105         /* CPU partition is powered. Enable the CPU clock. */
106         writel(CPU_CLOCK(cpu), CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR);
107         reg = readl(CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR);
108         udelay(10);
109
110         /* Remove I/O clamps. */
111         ret = tegra_powergate_remove_clamping(pwrgateid);
112         udelay(10);
113
114         /* Clear flow controller CSR. */
115         flowctrl_write_cpu_csr(cpu, 0);
116
117         return 0;
118 }
119
120 int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
121 {
122         int status;
123
124         /*
125          * Force the CPU into reset. The CPU must remain in reset when the
126          * flow controller state is cleared (which will cause the flow
127          * controller to stop driving reset if the CPU has been power-gated
128          * via the flow controller). This will have no effect on first boot
129          * of the CPU since it should already be in reset.
130          */
131         writel(CPU_RESET(cpu), CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET);
132         dmb();
133
134         /*
135          * Unhalt the CPU. If the flow controller was used to power-gate the
136          * CPU this will cause the flow controller to stop driving reset.
137          * The CPU will remain in reset because the clock and reset block
138          * is now driving reset.
139          */
140         flowctrl_write_cpu_halt(cpu, 0);
141
142         switch (tegra_chip_id) {
143         case TEGRA20:
144                 status = tegra20_power_up_cpu(cpu);
145                 break;
146         case TEGRA30:
147                 status = tegra30_power_up_cpu(cpu);
148                 break;
149         default:
150                 status = -EINVAL;
151                 break;
152         }
153
154         if (status)
155                 goto done;
156
157         /* Take the CPU out of reset. */
158         writel(CPU_RESET(cpu), CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR);
159         wmb();
160 done:
161         return status;
162 }
163
164 /*
165  * Initialise the CPU possible map early - this describes the CPUs
166  * which may be present or become present in the system.
167  */
168 void __init smp_init_cpus(void)
169 {
170         unsigned int i, ncores = scu_get_core_count(scu_base);
171
172         if (ncores > nr_cpu_ids) {
173                 pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
174                         ncores, nr_cpu_ids);
175                 ncores = nr_cpu_ids;
176         }
177
178         for (i = 0; i < ncores; i++)
179                 set_cpu_possible(i, true);
180
181         set_smp_cross_call(gic_raise_softirq);
182 }
183
184 void __init platform_smp_prepare_cpus(unsigned int max_cpus)
185 {
186         tegra_cpu_reset_handler_init();
187         scu_enable(scu_base);
188 }