arch/arm/mach-at91/board-gsia18s.c

   1 /*
   2  *  Copyright (C) 2010 Christian Glindkamp <christian.glindkamp@taskit.de>
   3  *                     taskit GmbH
   4  *                2010 Igor Plyatov <plyatov@gmail.com>
   5  *                     GeoSIG Ltd
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License as published by
   9  * the Free Software Foundation; either version 2 of the License, or
  10  * (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  20  */
  21
  22 #include <linux/platform_device.h>
  23 #include <linux/gpio.h>
  24 #include <linux/w1-gpio.h>
  25 #include <linux/i2c.h>
  26 #include <linux/i2c/pcf857x.h>
  27 #include <linux/gpio_keys.h>
  28 #include <linux/input.h>
  29
  30 #include <asm/mach-types.h>
  31 #include <asm/mach/arch.h>
  32
  33 #include <mach/board.h>
  34 #include <mach/at91sam9_smc.h>
  35 #include <mach/gsia18s.h>
  36 #include <mach/stamp9g20.h>
  37
  38 #include "sam9_smc.h"
  39 #include "generic.h"
  40
  41 static void __init gsia18s_init_early(void)
  42 {
  43         stamp9g20_init_early();
  44
  45         /*
  46          * USART0 on ttyS1 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI).
  47          * Used for Internal Analog Modem.
  48          */
  49         at91_register_uart(AT91SAM9260_ID_US0, 1,
  50                                 ATMEL_UART_CTS | ATMEL_UART_RTS |
  51                                 ATMEL_UART_DTR | ATMEL_UART_DSR |
  52                                 ATMEL_UART_DCD | ATMEL_UART_RI);
  53         /*
  54          * USART1 on ttyS2 (Rx, Tx, CTS, RTS).
  55          * Used for GPS or WiFi or Data stream.
  56          */
  57         at91_register_uart(AT91SAM9260_ID_US1, 2,
  58                                 ATMEL_UART_CTS | ATMEL_UART_RTS);
  59         /*
  60          * USART2 on ttyS3 (Rx, Tx, CTS, RTS).
  61          * Used for External Modem.
  62          */
  63         at91_register_uart(AT91SAM9260_ID_US2, 3,
  64                                 ATMEL_UART_CTS | ATMEL_UART_RTS);
  65         /*
  66          * USART3 on ttyS4 (Rx, Tx, RTS).
  67          * Used for RS-485.
  68          */
  69         at91_register_uart(AT91SAM9260_ID_US3, 4, ATMEL_UART_RTS);
  70
  71         /*
  72          * USART4 on ttyS5 (Rx, Tx).
  73          * Used for TRX433 Radio Module.
  74          */
  75         at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
  76 }
  77
  78 /*
  79  * Two USB Host ports
  80  */
  81 static struct at91_usbh_data __initdata usbh_data = {
  82         .ports          = 2,
  83         .vbus_pin       = {-EINVAL, -EINVAL},
  84         .overcurrent_pin= {-EINVAL, -EINVAL},
  85 };
  86
  87 /*
  88  * USB Device port
  89  */
  90 static struct at91_udc_data __initdata udc_data = {
  91         .vbus_pin       = AT91_PIN_PA22,
  92         .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
  93 };
  94
  95 /*
  96  * MACB Ethernet device
  97  */
  98 static struct macb_platform_data __initdata macb_data = {
  99         .phy_irq_pin    = AT91_PIN_PA28,
 100         .is_rmii        = 1,
 101 };
 102
 103 /*
 104  * LEDs and GPOs
 105  */
 106 static struct gpio_led gpio_leds[] = {
 107         {
 108                 .name                   = "gpo:spi1reset",
 109                 .gpio                   = AT91_PIN_PC1,
 110                 .active_low             = 0,
 111                 .default_trigger        = "none",
 112                 .default_state          = LEDS_GPIO_DEFSTATE_OFF,
 113         },
 114         {
 115                 .name                   = "gpo:trig_net_out",
 116                 .gpio                   = AT91_PIN_PB20,
 117                 .active_low             = 0,
 118                 .default_trigger        = "none",
 119                 .default_state          = LEDS_GPIO_DEFSTATE_OFF,
 120         },
 121         {
 122                 .name                   = "gpo:trig_net_dir",
 123                 .gpio                   = AT91_PIN_PB19,
 124                 .active_low             = 0,
 125                 .default_trigger        = "none",
 126                 .default_state          = LEDS_GPIO_DEFSTATE_OFF,
 127         },
 128         {
 129                 .name                   = "gpo:charge_dis",
 130                 .gpio                   = AT91_PIN_PC2,
 131                 .active_low             = 0,
 132                 .default_trigger        = "none",
 133                 .default_state          = LEDS_GPIO_DEFSTATE_OFF,
 134         },
 135         {
 136                 .name                   = "led:event",
 137                 .gpio                   = AT91_PIN_PB17,
 138                 .active_low             = 1,
 139                 .default_trigger        = "none",
 140                 .default_state          = LEDS_GPIO_DEFSTATE_OFF,
 141         },
 142         {
 143                 .name                   = "led:lan",
 144                 .gpio                   = AT91_PIN_PB18,
 145                 .active_low             = 1,
 146                 .default_trigger        = "none",
 147                 .default_state          = LEDS_GPIO_DEFSTATE_OFF,
 148         },
 149         {
 150                 .name                   = "led:error",
 151                 .gpio                   = AT91_PIN_PB16,
 152                 .active_low             = 1,
 153                 .default_trigger        = "none",
 154                 .default_state          = LEDS_GPIO_DEFSTATE_ON,
 155         }
 156 };
 157
 158 static struct gpio_led_platform_data gpio_led_info = {
 159         .leds           = gpio_leds,
 160         .num_leds       = ARRAY_SIZE(gpio_leds),
 161 };
 162
 163 static struct platform_device leds = {
 164         .name   = "leds-gpio",
 165         .id     = 0,
 166         .dev    = {
 167                 .platform_data  = &gpio_led_info,
 168         }
 169 };
 170
 171 static void __init gsia18s_leds_init(void)
 172 {
 173         platform_device_register(&leds);
 174 }
 175
 176 /* PCF8574 0x20 GPIO - U1 on the GS_IA18-CB_V3 board */
 177 static struct gpio_led pcf_gpio_leds1[] = {
 178         { /* bit 0 */
 179                 .name                   = "gpo:hdc_power",
 180                 .gpio                   = PCF_GPIO_HDC_POWER,
 181                 .active_low             = 0,
 182                 .default_trigger        = "none",
 183                 .default_state          = LEDS_GPIO_DEFSTATE_OFF,
 184         },
 185         { /* bit 1 */
 186                 .name                   = "gpo:wifi_setup",
 187                 .gpio                   = PCF_GPIO_WIFI_SETUP,
 188                 .active_low             = 1,
 189                 .default_trigger        = "none",
 190                 .default_state          = LEDS_GPIO_DEFSTATE_OFF,
 191         },
 192         { /* bit 2 */
 193                 .name                   = "gpo:wifi_enable",
 194                 .gpio                   = PCF_GPIO_WIFI_ENABLE,
 195                 .active_low             = 1,
 196                 .default_trigger        = "none",
 197                 .default_state          = LEDS_GPIO_DEFSTATE_OFF,
 198         },
 199         { /* bit 3      */
 200                 .name                   = "gpo:wifi_reset",
 201                 .gpio                   = PCF_GPIO_WIFI_RESET,
 202                 .active_low             = 1,
 203                 .default_trigger        = "none",
 204                 .default_state          = LEDS_GPIO_DEFSTATE_ON,
 205         },
 206         /* bit 4 used as GPI    */
 207         { /* bit 5 */
 208                 .name                   = "gpo:gps_setup",
 209                 .gpio                   = PCF_GPIO_GPS_SETUP,
 210                 .active_low             = 1,
 211                 .default_trigger        = "none",
 212                 .default_state          = LEDS_GPIO_DEFSTATE_OFF,
 213         },
 214         { /* bit 6 */
 215                 .name                   = "gpo:gps_standby",
 216                 .gpio                   = PCF_GPIO_GPS_STANDBY,
 217                 .active_low             = 0,
 218                 .default_trigger        = "none",
 219                 .default_state          = LEDS_GPIO_DEFSTATE_ON,
 220         },
 221         { /* bit 7 */
 222                 .name                   = "gpo:gps_power",
 223                 .gpio                   = PCF_GPIO_GPS_POWER,
 224                 .active_low             = 0,
 225                 .default_trigger        = "none",
 226                 .default_state          = LEDS_GPIO_DEFSTATE_OFF,
 227         }
 228 };
 229
 230 static struct gpio_led_platform_data pcf_gpio_led_info1 = {
 231         .leds           = pcf_gpio_leds1,
 232         .num_leds       = ARRAY_SIZE(pcf_gpio_leds1),
 233 };
 234
 235 static struct platform_device pcf_leds1 = {
 236         .name   = "leds-gpio", /* GS_IA18-CB_board */
 237         .id     = 1,
 238         .dev    = {
 239                 .platform_data  = &pcf_gpio_led_info1,
 240         }
 241 };
 242
 243 /* PCF8574 0x22 GPIO - U1 on the GS_2G_OPT1-A_V0 board (Alarm) */
 244 static struct gpio_led pcf_gpio_leds2[] = {
 245         { /* bit 0 */
 246                 .name                   = "gpo:alarm_1",
 247                 .gpio                   = PCF_GPIO_ALARM1,
 248                 .active_low             = 1,
 249                 .default_trigger        = "none",
 250                 .default_state          = LEDS_GPIO_DEFSTATE_OFF,
 251         },
 252         { /* bit 1 */
 253                 .name                   = "gpo:alarm_2",
 254                 .gpio                   = PCF_GPIO_ALARM2,
 255                 .active_low             = 1,
 256                 .default_trigger        = "none",
 257                 .default_state          = LEDS_GPIO_DEFSTATE_OFF,
 258         },
 259         { /* bit 2 */
 260                 .name                   = "gpo:alarm_3",
 261                 .gpio                   = PCF_GPIO_ALARM3,
 262                 .active_low             = 1,
 263                 .default_trigger        = "none",
 264                 .default_state          = LEDS_GPIO_DEFSTATE_OFF,
 265         },
 266         { /* bit 3 */
 267                 .name                   = "gpo:alarm_4",
 268                 .gpio                   = PCF_GPIO_ALARM4,
 269                 .active_low             = 1,
 270                 .default_trigger        = "none",
 271                 .default_state          = LEDS_GPIO_DEFSTATE_OFF,
 272         },
 273         /* bits 4, 5, 6 not used */
 274         { /* bit 7 */
 275                 .name                   = "gpo:alarm_v_relay_on",
 276                 .gpio                   = PCF_GPIO_ALARM_V_RELAY_ON,
 277                 .active_low             = 0,
 278                 .default_trigger        = "none",
 279                 .default_state          = LEDS_GPIO_DEFSTATE_OFF,
 280         },
 281 };
 282
 283 static struct gpio_led_platform_data pcf_gpio_led_info2 = {
 284         .leds           = pcf_gpio_leds2,
 285         .num_leds       = ARRAY_SIZE(pcf_gpio_leds2),
 286 };
 287
 288 static struct platform_device pcf_leds2 = {
 289         .name   = "leds-gpio",
 290         .id     = 2,
 291         .dev    = {
 292                 .platform_data  = &pcf_gpio_led_info2,
 293         }
 294 };
 295
 296 /* PCF8574 0x24 GPIO U1 on the GS_2G-OPT23-A_V0 board (Modem) */
 297 static struct gpio_led pcf_gpio_leds3[] = {
 298         { /* bit 0 */
 299                 .name                   = "gpo:modem_power",
 300                 .gpio                   = PCF_GPIO_MODEM_POWER,
 301                 .active_low             = 1,
 302                 .default_trigger        = "none",
 303                 .default_state          = LEDS_GPIO_DEFSTATE_OFF,
 304         },
 305                 /* bits 1 and 2 not used */
 306         { /* bit 3 */
 307                 .name                   = "gpo:modem_reset",
 308                 .gpio                   = PCF_GPIO_MODEM_RESET,
 309                 .active_low             = 1,
 310                 .default_trigger        = "none",
 311                 .default_state          = LEDS_GPIO_DEFSTATE_ON,
 312         },
 313                 /* bits 4, 5 and 6 not used */
 314         { /* bit 7 */
 315                 .name                   = "gpo:trx_reset",
 316                 .gpio                   = PCF_GPIO_TRX_RESET,
 317                 .active_low             = 1,
 318                 .default_trigger        = "none",
 319                 .default_state          = LEDS_GPIO_DEFSTATE_ON,
 320         }
 321 };
 322
 323 static struct gpio_led_platform_data pcf_gpio_led_info3 = {
 324         .leds           = pcf_gpio_leds3,
 325         .num_leds       = ARRAY_SIZE(pcf_gpio_leds3),
 326 };
 327
 328 static struct platform_device pcf_leds3 = {
 329         .name   = "leds-gpio",
 330         .id     = 3,
 331         .dev    = {
 332                 .platform_data  = &pcf_gpio_led_info3,
 333         }
 334 };
 335
 336 static void __init gsia18s_pcf_leds_init(void)
 337 {
 338         platform_device_register(&pcf_leds1);
 339         platform_device_register(&pcf_leds2);
 340         platform_device_register(&pcf_leds3);
 341 }
 342
 343 /*
 344  * SPI busses.
 345  */
 346 static struct spi_board_info gsia18s_spi_devices[] = {
 347         { /* User accessible spi0, cs0 used for communication with MSP RTC */
 348                 .modalias       = "spidev",
 349                 .bus_num        = 0,
 350                 .chip_select    = 0,
 351                 .max_speed_hz   = 580000,
 352                 .mode           = SPI_MODE_1,
 353         },
 354         { /* User accessible spi1, cs0 used for communication with int. DSP */
 355                 .modalias       = "spidev",
 356                 .bus_num        = 1,
 357                 .chip_select    = 0,
 358                 .max_speed_hz   = 5600000,
 359                 .mode           = SPI_MODE_0,
 360         },
 361         { /* User accessible spi1, cs1 used for communication with ext. DSP */
 362                 .modalias       = "spidev",
 363                 .bus_num        = 1,
 364                 .chip_select    = 1,
 365                 .max_speed_hz   = 5600000,
 366                 .mode           = SPI_MODE_0,
 367         },
 368         { /* User accessible spi1, cs2 used for communication with ext. DSP */
 369                 .modalias       = "spidev",
 370                 .bus_num        = 1,
 371                 .chip_select    = 2,
 372                 .max_speed_hz   = 5600000,
 373                 .mode           = SPI_MODE_0,
 374         },
 375         { /* User accessible spi1, cs3 used for communication with ext. DSP */
 376                 .modalias       = "spidev",
 377                 .bus_num        = 1,
 378                 .chip_select    = 3,
 379                 .max_speed_hz   = 5600000,
 380                 .mode           = SPI_MODE_0,
 381         }
 382 };
 383
 384 /*
 385  * GPI Buttons
 386  */
 387 static struct gpio_keys_button buttons[] = {
 388         {
 389                 .gpio           = GPIO_TRIG_NET_IN,
 390                 .code           = BTN_1,
 391                 .desc           = "TRIG_NET_IN",
 392                 .type           = EV_KEY,
 393                 .active_low     = 0,
 394                 .wakeup         = 1,
 395         },
 396         { /* SW80 on the GS_IA18_S-MN board*/
 397                 .gpio           = GPIO_CARD_UNMOUNT_0,
 398                 .code           = BTN_2,
 399                 .desc           = "Card umount 0",
 400                 .type           = EV_KEY,
 401                 .active_low     = 1,
 402                 .wakeup         = 1,
 403         },
 404         { /* SW79 on the GS_IA18_S-MN board*/
 405                 .gpio           = GPIO_CARD_UNMOUNT_1,
 406                 .code           = BTN_3,
 407                 .desc           = "Card umount 1",
 408                 .type           = EV_KEY,
 409                 .active_low     = 1,
 410                 .wakeup         = 1,
 411         },
 412         { /* SW280 on the GS_IA18-CB board*/
 413                 .gpio           = GPIO_KEY_POWER,
 414                 .code           = KEY_POWER,
 415                 .desc           = "Power Off Button",
 416                 .type           = EV_KEY,
 417                 .active_low     = 0,
 418                 .wakeup         = 1,
 419         }
 420 };
 421
 422 static struct gpio_keys_platform_data button_data = {
 423         .buttons        = buttons,
 424         .nbuttons       = ARRAY_SIZE(buttons),
 425 };
 426
 427 static struct platform_device button_device = {
 428         .name           = "gpio-keys",
 429         .id             = -1,
 430         .num_resources  = 0,
 431         .dev            = {
 432                 .platform_data  = &button_data,
 433         }
 434 };
 435
 436 static void __init gsia18s_add_device_buttons(void)
 437 {
 438         at91_set_gpio_input(GPIO_TRIG_NET_IN, 1);
 439         at91_set_deglitch(GPIO_TRIG_NET_IN, 1);
 440         at91_set_gpio_input(GPIO_CARD_UNMOUNT_0, 1);
 441         at91_set_deglitch(GPIO_CARD_UNMOUNT_0, 1);
 442         at91_set_gpio_input(GPIO_CARD_UNMOUNT_1, 1);
 443         at91_set_deglitch(GPIO_CARD_UNMOUNT_1, 1);
 444         at91_set_gpio_input(GPIO_KEY_POWER, 0);
 445         at91_set_deglitch(GPIO_KEY_POWER, 1);
 446
 447         platform_device_register(&button_device);
 448 }
 449
 450 /*
 451  * I2C
 452  */
 453 static int pcf8574x_0x20_setup(struct i2c_client *client, int gpio,
 454                                 unsigned int ngpio, void *context)
 455 {
 456         int status;
 457
 458         status = gpio_request(gpio + PCF_GPIO_ETH_DETECT, "eth_det");
 459         if (status < 0) {
 460                 pr_err("error: can't request GPIO%d\n",
 461                         gpio + PCF_GPIO_ETH_DETECT);
 462                 return status;
 463         }
 464         status = gpio_direction_input(gpio + PCF_GPIO_ETH_DETECT);
 465         if (status < 0) {
 466                 pr_err("error: can't setup GPIO%d as input\n",
 467                         gpio + PCF_GPIO_ETH_DETECT);
 468                 return status;
 469         }
 470         status = gpio_export(gpio + PCF_GPIO_ETH_DETECT, false);
 471         if (status < 0) {
 472                 pr_err("error: can't export GPIO%d\n",
 473                         gpio + PCF_GPIO_ETH_DETECT);
 474                 return status;
 475         }
 476         status = gpio_sysfs_set_active_low(gpio + PCF_GPIO_ETH_DETECT, 1);
 477         if (status < 0) {
 478                 pr_err("error: gpio_sysfs_set active_low(GPIO%d, 1)\n",
 479                         gpio + PCF_GPIO_ETH_DETECT);
 480                 return status;
 481         }
 482
 483         return 0;
 484 }
 485
 486 static int pcf8574x_0x20_teardown(struct i2c_client *client, int gpio,
 487                                         unsigned ngpio, void *context)
 488 {
 489         gpio_free(gpio + PCF_GPIO_ETH_DETECT);
 490         return 0;
 491 }
 492
 493 static struct pcf857x_platform_data pcf20_pdata = {
 494         .gpio_base      = GS_IA18_S_PCF_GPIO_BASE0,
 495         .n_latch        = (1 << 4),
 496         .setup          = pcf8574x_0x20_setup,
 497         .teardown       = pcf8574x_0x20_teardown,
 498 };
 499
 500 static struct pcf857x_platform_data pcf22_pdata = {
 501         .gpio_base      = GS_IA18_S_PCF_GPIO_BASE1,
 502 };
 503
 504 static struct pcf857x_platform_data pcf24_pdata = {
 505         .gpio_base      = GS_IA18_S_PCF_GPIO_BASE2,
 506 };
 507
 508 static struct i2c_board_info __initdata gsia18s_i2c_devices[] = {
 509         { /* U1 on the GS_IA18-CB_V3 board */
 510                 I2C_BOARD_INFO("pcf8574", 0x20),
 511                 .platform_data = &pcf20_pdata,
 512         },
 513         { /* U1 on the GS_2G_OPT1-A_V0 board (Alarm) */
 514                 I2C_BOARD_INFO("pcf8574", 0x22),
 515                 .platform_data = &pcf22_pdata,
 516         },
 517         { /* U1 on the GS_2G-OPT23-A_V0 board (Modem) */
 518                 I2C_BOARD_INFO("pcf8574", 0x24),
 519                 .platform_data = &pcf24_pdata,
 520         },
 521         { /* U161 on the GS_IA18_S-MN board */
 522                 I2C_BOARD_INFO("24c1024", 0x50),
 523         },
 524         { /* U162 on the GS_IA18_S-MN board */
 525                 I2C_BOARD_INFO("24c01", 0x53),
 526         },
 527 };
 528
 529 /*
 530  * Compact Flash
 531  */
 532 static struct at91_cf_data __initdata gsia18s_cf1_data = {
 533         .irq_pin        = AT91_PIN_PA27,
 534         .det_pin        = AT91_PIN_PB30,
 535         .vcc_pin        = -EINVAL,
 536         .rst_pin        = AT91_PIN_PB31,
 537         .chipselect     = 5,
 538         .flags          = AT91_CF_TRUE_IDE,
 539 };
 540
 541 /* Power Off by RTC */
 542 static void gsia18s_power_off(void)
 543 {
 544         pr_notice("Power supply will be switched off automatically now or after 60 seconds without ArmDAS.\n");
 545         at91_set_gpio_output(AT91_PIN_PA25, 1);
 546         /* Spin to death... */
 547         while (1)
 548                 ;
 549 }
 550
 551 static int __init gsia18s_power_off_init(void)
 552 {
 553         pm_power_off = gsia18s_power_off;
 554         return 0;
 555 }
 556
 557 /* ---------------------------------------------------------------------------*/
 558
 559 static void __init gsia18s_board_init(void)
 560 {
 561         stamp9g20_board_init();
 562         at91_add_device_usbh(&usbh_data);
 563         at91_add_device_udc(&udc_data);
 564         at91_add_device_eth(&macb_data);
 565         gsia18s_leds_init();
 566         gsia18s_pcf_leds_init();
 567         gsia18s_add_device_buttons();
 568         at91_add_device_i2c(gsia18s_i2c_devices,
 569                                 ARRAY_SIZE(gsia18s_i2c_devices));
 570         at91_add_device_cf(&gsia18s_cf1_data);
 571         at91_add_device_spi(gsia18s_spi_devices,
 572                                 ARRAY_SIZE(gsia18s_spi_devices));
 573         gsia18s_power_off_init();
 574 }
 575
 576 MACHINE_START(GSIA18S, "GS_IA18_S")
 577         .timer          = &at91sam926x_timer,
 578         .map_io         = at91_map_io,
 579         .init_early     = gsia18s_init_early,
 580         .init_irq       = at91_init_irq_default,
 581         .init_machine   = gsia18s_board_init,
 582 MACHINE_END