arch/arm/boot/dts/spear600.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * Copyright 2012 Stefan Roese <sr@denx.de>
   4  */
   5
   6 / {
   7         #address-cells = <1>;
   8         #size-cells = <1>;
   9         compatible = "st,spear600";
  10
  11         cpus {
  12                 #address-cells = <0>;
  13                 #size-cells = <0>;
  14
  15                 cpu {
  16                         compatible = "arm,arm926ej-s";
  17                         device_type = "cpu";
  18                 };
  19         };
  20
  21         memory {
  22                 device_type = "memory";
  23                 reg = <0 0x40000000>;
  24         };
  25
  26         ahb {
  27                 #address-cells = <1>;
  28                 #size-cells = <1>;
  29                 compatible = "simple-bus";
  30                 ranges = <0xd0000000 0xd0000000 0x30000000>;
  31
  32                 vic0: interrupt-controller@f1100000 {
  33                         compatible = "arm,pl190-vic";
  34                         interrupt-controller;
  35                         reg = <0xf1100000 0x1000>;
  36                         #interrupt-cells = <1>;
  37                 };
  38
  39                 vic1: interrupt-controller@f1000000 {
  40                         compatible = "arm,pl190-vic";
  41                         interrupt-controller;
  42                         reg = <0xf1000000 0x1000>;
  43                         #interrupt-cells = <1>;
  44                 };
  45
  46                 clcd: clcd@fc200000 {
  47                         compatible = "arm,pl110", "arm,primecell";
  48                         reg = <0xfc200000 0x1000>;
  49                         interrupt-parent = <&vic1>;
  50                         interrupts = <12>;
  51                         status = "disabled";
  52                 };
  53
  54                 dmac: dma@fc400000 {
  55                         compatible = "arm,pl080", "arm,primecell";
  56                         reg = <0xfc400000 0x1000>;
  57                         interrupt-parent = <&vic1>;
  58                         interrupts = <10>;
  59                         status = "disabled";
  60                 };
  61
  62                 gmac: ethernet@e0800000 {
  63                         compatible = "st,spear600-gmac";
  64                         reg = <0xe0800000 0x8000>;
  65                         interrupt-parent = <&vic1>;
  66                         interrupts = <24 23>;
  67                         interrupt-names = "macirq", "eth_wake_irq";
  68                         phy-mode = "gmii";
  69                         status = "disabled";
  70                 };
  71
  72                 fsmc: flash@d1800000 {
  73                         compatible = "st,spear600-fsmc-nand";
  74                         #address-cells = <1>;
  75                         #size-cells = <1>;
  76                         reg = <0xd1800000 0x1000        /* FSMC Register */
  77                                0xd2000000 0x0010        /* NAND Base DATA */
  78                                0xd2020000 0x0010        /* NAND Base ADDR */
  79                                0xd2010000 0x0010>;      /* NAND Base CMD */
  80                         reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
  81                         status = "disabled";
  82                 };
  83
  84                 smi: flash@fc000000 {
  85                         compatible = "st,spear600-smi";
  86                         #address-cells = <1>;
  87                         #size-cells = <1>;
  88                         reg = <0xfc000000 0x1000>;
  89                         interrupt-parent = <&vic1>;
  90                         interrupts = <12>;
  91                         status = "disabled";
  92                 };
  93
  94                 ehci_usb0: ehci@e1800000 {
  95                         compatible = "st,spear600-ehci", "usb-ehci";
  96                         reg = <0xe1800000 0x1000>;
  97                         interrupt-parent = <&vic1>;
  98                         interrupts = <27>;
  99                         status = "disabled";
 100                 };
 101
 102                 ehci_usb1: ehci@e2000000 {
 103                         compatible = "st,spear600-ehci", "usb-ehci";
 104                         reg = <0xe2000000 0x1000>;
 105                         interrupt-parent = <&vic1>;
 106                         interrupts = <29>;
 107                         status = "disabled";
 108                 };
 109
 110                 ohci_usb0: ohci@e1900000 {
 111                         compatible = "st,spear600-ohci", "usb-ohci";
 112                         reg = <0xe1900000 0x1000>;
 113                         interrupt-parent = <&vic1>;
 114                         interrupts = <26>;
 115                         status = "disabled";
 116                 };
 117
 118                 ohci_usb1: ohci@e2100000 {
 119                         compatible = "st,spear600-ohci", "usb-ohci";
 120                         reg = <0xe2100000 0x1000>;
 121                         interrupt-parent = <&vic1>;
 122                         interrupts = <28>;
 123                         status = "disabled";
 124                 };
 125
 126                 apb {
 127                         #address-cells = <1>;
 128                         #size-cells = <1>;
 129                         compatible = "simple-bus";
 130                         ranges = <0xd0000000 0xd0000000 0x30000000>;
 131
 132                         uart0: serial@d0000000 {
 133                                 compatible = "arm,pl011", "arm,primecell";
 134                                 reg = <0xd0000000 0x1000>;
 135                                 interrupt-parent = <&vic0>;
 136                                 interrupts = <24>;
 137                                 status = "disabled";
 138                         };
 139
 140                         uart1: serial@d0080000 {
 141                                 compatible = "arm,pl011", "arm,primecell";
 142                                 reg = <0xd0080000 0x1000>;
 143                                 interrupt-parent = <&vic0>;
 144                                 interrupts = <25>;
 145                                 status = "disabled";
 146                         };
 147
 148                         /* local/cpu GPIO */
 149                         gpio0: gpio@f0100000 {
 150                                 #gpio-cells = <2>;
 151                                 compatible = "arm,pl061", "arm,primecell";
 152                                 gpio-controller;
 153                                 reg = <0xf0100000 0x1000>;
 154                                 interrupt-parent = <&vic0>;
 155                                 interrupts = <18>;
 156                         };
 157
 158                         /* basic GPIO */
 159                         gpio1: gpio@fc980000 {
 160                                 #gpio-cells = <2>;
 161                                 compatible = "arm,pl061", "arm,primecell";
 162                                 gpio-controller;
 163                                 reg = <0xfc980000 0x1000>;
 164                                 interrupt-parent = <&vic1>;
 165                                 interrupts = <19>;
 166                         };
 167
 168                         /* appl GPIO */
 169                         gpio2: gpio@d8100000 {
 170                                 #gpio-cells = <2>;
 171                                 compatible = "arm,pl061", "arm,primecell";
 172                                 gpio-controller;
 173                                 reg = <0xd8100000 0x1000>;
 174                                 interrupt-parent = <&vic1>;
 175                                 interrupts = <4>;
 176                         };
 177
 178                         i2c: i2c@d0200000 {
 179                                 #address-cells = <1>;
 180                                 #size-cells = <0>;
 181                                 compatible = "snps,designware-i2c";
 182                                 reg = <0xd0200000 0x1000>;
 183                                 interrupt-parent = <&vic0>;
 184                                 interrupts = <28>;
 185                                 status = "disabled";
 186                         };
 187
 188                         rtc: rtc@fc900000 {
 189                                 compatible = "st,spear600-rtc";
 190                                 reg = <0xfc900000 0x1000>;
 191                                 interrupt-parent = <&vic0>;
 192                                 interrupts = <10>;
 193                                 status = "disabled";
 194                         };
 195
 196                         timer@f0000000 {
 197                                 compatible = "st,spear-timer";
 198                                 reg = <0xf0000000 0x400>;
 199                                 interrupt-parent = <&vic0>;
 200                                 interrupts = <16>;
 201                         };
 202
 203                         adc: adc@d820b000 {
 204                                 compatible = "st,spear600-adc";
 205                                 reg = <0xd820b000 0x1000>;
 206                                 interrupt-parent = <&vic1>;
 207                                 interrupts = <6>;
 208                                 status = "disabled";
 209                         };
 210                 };
 211         };
 212 };