Documentation/devicetree/bindings/arm/brcm-brcmstb.txt

   1 ARM Broadcom STB platforms Device Tree Bindings
   2 -----------------------------------------------
   3 Boards with Broadcom Brahma15 ARM-based BCMxxxx (generally BCM7xxx variants)
   4 SoC shall have the following DT organization:
   5
   6 Required root node properties:
   7     - compatible: "brcm,bcm<chip_id>", "brcm,brcmstb"
   8
   9 example:
  10 / {
  11     #address-cells = <2>;
  12     #size-cells = <2>;
  13     model = "Broadcom STB (bcm7445)";
  14     compatible = "brcm,bcm7445", "brcm,brcmstb";
  15
  16 Further, syscon nodes that map platform-specific registers used for general
  17 system control is required:
  18
  19     - compatible: "brcm,bcm<chip_id>-sun-top-ctrl", "syscon"
  20     - compatible: "brcm,bcm<chip_id>-hif-cpubiuctrl", "syscon"
  21     - compatible: "brcm,bcm<chip_id>-hif-continuation", "syscon"
  22
  23 example:
  24     rdb {
  25         #address-cells = <1>;
  26         #size-cells = <1>;
  27         compatible = "simple-bus";
  28         ranges = <0 0x00 0xf0000000 0x1000000>;
  29
  30         sun_top_ctrl: syscon@404000 {
  31             compatible = "brcm,bcm7445-sun-top-ctrl", "syscon";
  32             reg = <0x404000 0x51c>;
  33         };
  34
  35         hif_cpubiuctrl: syscon@3e2400 {
  36             compatible = "brcm,bcm7445-hif-cpubiuctrl", "syscon";
  37             reg = <0x3e2400 0x5b4>;
  38         };
  39
  40         hif_continuation: syscon@452000 {
  41             compatible = "brcm,bcm7445-hif-continuation", "syscon";
  42             reg = <0x452000 0x100>;
  43         };
  44     };
  45
  46 Lastly, nodes that allow for support of SMP initialization and reboot are
  47 required:
  48
  49 smpboot
  50 -------
  51 Required properties:
  52
  53     - compatible
  54         The string "brcm,brcmstb-smpboot".
  55
  56     - syscon-cpu
  57         A phandle / integer array property which lets the BSP know the location
  58         of certain CPU power-on registers.
  59
  60         The layout of the property is as follows:
  61             o a phandle to the "hif_cpubiuctrl" syscon node
  62             o offset to the base CPU power zone register
  63             o offset to the base CPU reset register
  64
  65     - syscon-cont
  66         A phandle pointing to the syscon node which describes the CPU boot
  67         continuation registers.
  68             o a phandle to the "hif_continuation" syscon node
  69
  70 example:
  71     smpboot {
  72         compatible = "brcm,brcmstb-smpboot";
  73         syscon-cpu = <&hif_cpubiuctrl 0x88 0x178>;
  74         syscon-cont = <&hif_continuation>;
  75     };
  76
  77 reboot
  78 -------
  79 Required properties
  80
  81     - compatible
  82         The string property "brcm,brcmstb-reboot".
  83
  84     - syscon
  85         A phandle / integer array that points to the syscon node which describes
  86         the general system reset registers.
  87             o a phandle to "sun_top_ctrl"
  88             o offset to the "reset source enable" register
  89             o offset to the "software master reset" register
  90
  91 example:
  92     reboot {
  93         compatible = "brcm,brcmstb-reboot";
  94         syscon = <&sun_top_ctrl 0x304 0x308>;
  95     };