target/linux/ramips/dts/WRTNODE2.dtsi

   1 #include "mt7628an.dtsi"
   2
   3 #include <dt-bindings/input/input.h>
   4
   5 / {
   6         chosen {
   7                 bootargs = "console=ttyS0,115200";
   8         };
   9
  10         gpio-keys-polled {
  11                 compatible = "gpio-keys-polled";
  12                 #address-cells = <1>;
  13                 #size-cells = <0>;
  14                 poll-interval = <20>;
  15
  16                 reset {
  17                         label = "reset";
  18                         gpios = <&gpio0 5 1>;
  19                         linux,code = <KEY_RESTART>;
  20                 };
  21         };
  22 };
  23
  24 &spi0 {
  25         status = "okay";
  26
  27         m25p80@0 {
  28                 #address-cells = <1>;
  29                 #size-cells = <1>;
  30                 compatible = "jedec,spi-nor";
  31                 reg = <0>;
  32                 spi-max-frequency = <10000000>;
  33                 m25p,chunked-io = <32>;
  34
  35                 partition@0 {
  36                         label = "u-boot";
  37                         reg = <0x0 0x30000>;
  38                         read-only;
  39                 };
  40
  41                 partition@30000 {
  42                         label = "u-boot-env";
  43                         reg = <0x30000 0x10000>;
  44                         read-only;
  45                 };
  46
  47                 factory: partition@40000 {
  48                         label = "factory";
  49                         reg = <0x40000 0x10000>;
  50                         read-only;
  51                 };
  52
  53                 partition@50000 {
  54                         label = "firmware";
  55                         reg = <0x50000 0x1fb0000>;
  56                 };
  57         };
  58
  59         spidev@1 {
  60                 #address-cells = <1>;
  61                 #size-cells = <1>;
  62                 compatible = "linux,spidev";
  63                 reg = <1>;
  64                 spi-max-frequency = <10000000>;
  65         };
  66 };
  67
  68 &uart1 {
  69         status = "okay";
  70 };
  71
  72 &i2c {
  73         status = "okay";
  74 };
  75
  76 &ethernet {
  77         mtd-mac-address = <&factory 0x4>;
  78         ralink,port-map = "llllw";
  79 };
  80
  81 &sdhci {
  82         status = "okay";
  83 };
  84
  85 &pcie {
  86         status = "okay";
  87 };
  88
  89 &wmac {
  90         status = "okay";
  91 };