target/linux/ramips/dts/WRTNODE.dts

   1 /dts-v1/;
   2
   3 #include "mt7620n.dtsi"
   4
   5 / {
   6         compatible = "wrtnode", "ralink,mt7620n-soc";
   7         model = "WRTNODE";
   8
   9         gpio-leds {
  10                 compatible = "gpio-leds";
  11
  12                 indicator {
  13                         label = "wrtnode:blue:indicator";
  14                         gpios = <&gpio1 14 1>;
  15                 };
  16         };
  17 };
  18
  19 &gpio1 {
  20         status = "okay";
  21 };
  22
  23 &gpio2 {
  24         status = "okay";
  25 };
  26
  27 &gpio3 {
  28         status = "okay";
  29 };
  30
  31 &spi0 {
  32         status = "okay";
  33
  34         m25p80@0 {
  35                 #address-cells = <1>;
  36                 #size-cells = <1>;
  37                 compatible = "jedec,spi-nor";
  38                 reg = <0>;
  39                 spi-max-frequency = <10000000>;
  40
  41                 partition@0 {
  42                         label = "u-boot";
  43                         reg = <0x0 0x30000>;
  44                         read-only;
  45                 };
  46
  47                 partition@30000 {
  48                         label = "u-boot-env";
  49                         reg = <0x30000 0x10000>;
  50                         read-only;
  51                 };
  52
  53                 factory: partition@40000 {
  54                         label = "factory";
  55                         reg = <0x40000 0x10000>;
  56                         read-only;
  57                 };
  58
  59                 partition@50000 {
  60                         label = "firmware";
  61                         reg = <0x50000 0xfb0000>;
  62                 };
  63         };
  64 };
  65
  66 &ehci {
  67         status = "okay";
  68 };
  69
  70 &ohci {
  71         status = "okay";
  72 };
  73
  74 &ethernet {
  75         mtd-mac-address = <&factory 0x4>;
  76         mediatek,portmap = "wllll";
  77 };
  78
  79 &wmac {
  80         ralink,mtd-eeprom = <&factory 0>;
  81 };
  82
  83 &pinctrl {
  84         state_default: pinctrl0 {
  85                 default {
  86                         ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf", "spi refclk";
  87                         ralink,function = "gpio";
  88                 };
  89         };
  90 };