target/linux/ramips/dts/WRTNODE.dts

   1 /dts-v1/;
   2
   3 #include "mt7620n.dtsi"
   4
   5 / {
   6         compatible = "wrtnode", "ralink,mt7620n-soc";
   7         model = "WRTNODE";
   8
   9         gpio-leds {
  10                 compatible = "gpio-leds";
  11
  12                 indicator {
  13                         label = "wrtnode:blue:indicator";
  14                         gpios = <&gpio1 14 1>;
  15                 };
  16         };
  17 };
  18
  19 &gpio1 {
  20         status = "okay";
  21 };
  22
  23 &gpio2 {
  24         status = "okay";
  25 };
  26
  27 &gpio3 {
  28         status = "okay";
  29 };
  30
  31 &spi0 {
  32         status = "okay";
  33
  34         m25p80@0 {
  35                 #address-cells = <1>;
  36                 #size-cells = <1>;
  37                 compatible = "jedec,spi-nor";
  38                 reg = <0>;
  39                 linux,modalias = "m25p80", "w25q128";
  40                 spi-max-frequency = <10000000>;
  41
  42                 partition@0 {
  43                         label = "u-boot";
  44                         reg = <0x0 0x30000>;
  45                         read-only;
  46                 };
  47
  48                 partition@30000 {
  49                         label = "u-boot-env";
  50                         reg = <0x30000 0x10000>;
  51                         read-only;
  52                 };
  53
  54                 factory: partition@40000 {
  55                         label = "factory";
  56                         reg = <0x40000 0x10000>;
  57                         read-only;
  58                 };
  59
  60                 partition@50000 {
  61                         label = "firmware";
  62                         reg = <0x50000 0xfb0000>;
  63                 };
  64         };
  65 };
  66
  67 &ehci {
  68         status = "okay";
  69 };
  70
  71 &ohci {
  72         status = "okay";
  73 };
  74
  75 &ethernet {
  76         mtd-mac-address = <&factory 0x4>;
  77         mediatek,portmap = "wllll";
  78 };
  79
  80 &wmac {
  81         ralink,mtd-eeprom = <&factory 0>;
  82 };
  83
  84 &pinctrl {
  85         state_default: pinctrl0 {
  86                 default {
  87                         ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf", "spi refclk";
  88                         ralink,function = "gpio";
  89                 };
  90         };
  91 };