target/linux/ramips/dts/WLR-6000.dts

   1 /dts-v1/;
   2
   3 #include "rt3883.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         model = "Sitecom WLR-6000";
  10
  11         gpio-keys-polled {
  12                 compatible = "gpio-keys-polled";
  13                 #address-cells = <1>;
  14                 #size-cells = <0>;
  15                 poll-interval = <20>;
  16
  17                 reset {
  18                         label = "reset";
  19                         gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
  20                         linux,code = <KEY_RESTART>;
  21                 };
  22         };
  23
  24         gpio-leds {
  25                 compatible = "gpio-leds";
  26
  27                 power {
  28                         label = "wlr-6000:red:power";
  29                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  30                 };
  31
  32                 ops {
  33                         label = "wlr-6000:white:ops";
  34                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  35                 };
  36         };
  37
  38         gpio_export {
  39                 compatible = "gpio-export";
  40                 #size-cells = <0>;
  41
  42                 usb {
  43                         gpio-export,name = "usb";
  44                         gpio-export,output = <1>;
  45                         gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
  46                 };
  47         };
  48 };
  49
  50 &gpio1 {
  51         status = "okay";
  52 };
  53
  54 &pinctrl {
  55         state_default: pinctrl0 {
  56                 gpio {
  57                         ralink,group = "i2c", "jtag", "uartf";
  58                         ralink,function = "gpio";
  59                 };
  60         };
  61 };
  62
  63 &ethernet {
  64         status = "okay";
  65         mtd-mac-address = <&factory 0x8004>;
  66         mtd-mac-address-increment = <1>;
  67
  68         port@0 {
  69                 phy-handle = <&phy0>;
  70                 phy-mode = "rgmii";
  71         };
  72
  73         mdio-bus {
  74                 status = "okay";
  75
  76                 phy0: ethernet-phy@0 {
  77                         reg = <0>;
  78                         phy-mode = "rgmii";
  79
  80                         qca,ar8327-initvals = <
  81                                 0x04 0x07600000 /* PORT0 PAD MODE CTRL */
  82                                 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
  83                                 0x10 0x40000000 /* Power-on Strapping: 176-pin interface configuration */
  84                                 0x50 0xc437c437 /* LED Control Register 0 */
  85                                 0x54 0xc337c337 /* LED Control Register 1 */
  86                                 0x58 0x00000000 /* LED Control Register 2 */
  87                                 0x5c 0x03ffff00 /* LED Control Register 3 */
  88                                 0x7c 0x0000007e /* PORT0_STATUS */
  89                                 0x94 0x0000007e /* PORT6 STATUS */
  90                         >;
  91                 };
  92         };
  93 };
  94
  95 &spi0 {
  96         status = "okay";
  97
  98         m25p80@0 {
  99                 #address-cells = <1>;
 100                 #size-cells = <1>;
 101                 compatible = "jedec,spi-nor";
 102                 reg = <0>;
 103                 spi-max-frequency = <8600000>;
 104                 m25p,fast-read;
 105
 106                 partition@0 {
 107                         label = "u-boot";
 108                         reg = <0x0 0x30000>;
 109                         read-only;
 110                 };
 111
 112                 partition@30000 {
 113                         label = "u-boot-env";
 114                         reg = <0x30000 0x10000>;
 115                         read-only;
 116                 };
 117
 118                 factory: partition@40000 {
 119                         label = "factory";
 120                         reg = <0x40000 0x10000>;
 121                         read-only;
 122                 };
 123
 124                 partition@50000 {
 125                         label = "firmware";
 126                         reg = <0x50000 0x713000>;
 127                 };
 128
 129                 partition@763000 {
 130                         label = "manufacture";
 131                         reg = <0x763000 0x7D000>;
 132                         read-only;
 133                 };
 134
 135                 partition@7E0000 {
 136                         label = "backup";
 137                         reg = <0x7E0000 0x10000>;
 138                         read-only;
 139                 };
 140
 141                 partition@7F0000 {
 142                         label = "storage";
 143                         reg = <0x7F0000 0x10000>;
 144                         read-only;
 145                 };
 146         };
 147 };
 148
 149 &pci {
 150         status = "okay";
 151         pinctrl-names = "default";
 152         pinctrl-0 = <&pci_pins>;
 153
 154         pci_pins: pci {
 155                 pci {
 156                         ralink,group = "pci";
 157                         ralink,function = "pci-fnc";
 158                 };
 159         };
 160
 161         host-bridge {
 162                 pci-bridge@1 {
 163                         status = "okay";
 164
 165                         wifi@1814,3091 {
 166                                 compatible = "pci1814,3091";
 167                                 reg = <0x10000 0 0 0 0>;
 168                                 ralink,mtd-eeprom = <&factory 0x8000>;
 169                         };
 170                 };
 171         };
 172 };
 173
 174 &wmac {
 175         status = "okay";
 176         ralink,2ghz = <0>;
 177         ralink,mtd-eeprom = <&factory 0x0>;
 178 };
 179
 180 &ehci {
 181         status = "okay";
 182 };
 183
 184 &ohci {
 185         status = "okay";
 186 };