target/linux/ramips/dts/WL-351.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "WL-351", "ralink,rt3052-soc";
   9         model = "Sitecom WL-351 v1 002";
  10
  11         cfi@1f000000 {
  12                 compatible = "cfi-flash";
  13                 reg = <0x1f000000 0x800000>;
  14                 bank-width = <2>;
  15                 device-width = <2>;
  16                 #address-cells = <1>;
  17                 #size-cells = <1>;
  18
  19                 partition@0 {
  20                         label = "u-boot";
  21                         reg = <0x0 0x30000>;
  22                         read-only;
  23                 };
  24
  25                 partition@30000 {
  26                         label = "u-boot-env";
  27                         reg = <0x30000 0x10000>;
  28                         read-only;
  29                 };
  30
  31                 factory: partition@40000 {
  32                         label = "factory";
  33                         reg = <0x40000 0x10000>;
  34                         read-only;
  35                 };
  36
  37                 partition@50000 {
  38                         label = "firmware";
  39                         reg = <0x50000 0x3b0000>;
  40                 };
  41         };
  42
  43         gpio-leds {
  44                 compatible = "gpio-leds";
  45
  46                 power {
  47                         label = "wl-351:amber:power";
  48                         gpios = <&gpio0 8 1>;
  49                 };
  50
  51                 unpopulated {
  52                         label = "wl-351:amber:unpopulated";
  53                         gpios = <&gpio0 12 1>;
  54                 };
  55
  56                 unpopulated2 {
  57                         label = "wl-351:blue:unpopulated";
  58                         gpios = <&gpio0 13 1>;
  59                 };
  60         };
  61
  62         gpio-keys-polled {
  63                 compatible = "gpio-keys-polled";
  64                 #address-cells = <1>;
  65                 #size-cells = <0>;
  66                 poll-interval = <20>;
  67
  68                 reset {
  69                         label = "reset";
  70                         gpios = <&gpio0 10 1>;
  71                         linux,code = <KEY_RESTART>;
  72                 };
  73
  74                 wps {
  75                         label = "wps";
  76                         gpios = <&gpio0 0 1>;
  77                         linux,code = <KEY_WPS_BUTTON>;
  78                 };
  79         };
  80
  81         rtl8366rb {
  82                 compatible = "rtl8366rb";
  83                 gpio-sda = <&gpio0 1 0>;
  84                 gpio-sck = <&gpio0 2 0>;
  85         };
  86 };
  87
  88 &pinctrl {
  89         state_default: pinctrl0 {
  90                 gpio {
  91                         ralink,group = "spi", "i2c", "jtag", "mdio", "uartf";
  92                         ralink,function = "gpio";
  93                 };
  94                 rgmii {
  95                         ralink,group = "rgmii";
  96                         ralink,function = "rgmii";
  97                 };
  98         };
  99 };
 100
 101 &ethernet {
 102         mtd-mac-address = <&factory 0x4>;
 103 };
 104
 105 &esw {
 106         ralink,rgmii = <1>;
 107         mediatek,portmap = <0x3f>;
 108         ralink,fct2 = <0x0002500c>;
 109         /*
 110          * ext phy base addr 31, rx/tx clock skew 0,
 111          * turbo mii off, rgmi 3.3v off, port 5 polling off
 112          * port5: enabled, gige, full-duplex, rx/tx-flow-control
 113          * port6: enabled, gige, full-duplex, rx/tx-flow-control
 114         */
 115         ralink,fpa2 = <0x1f003fff>;
 116 };
 117
 118 &wmac {
 119         ralink,mtd-eeprom = <&factory 0>;
 120 };
 121
 122 &otg {
 123         status = "okay";
 124 };