target/linux/ramips/dts/WCR150GN.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "WCR150GN", "ralink,rt3050-soc";
   9         model = "Sparklan WCR-150GN";
  10
  11         cfi@1f000000 {
  12                 compatible = "cfi-flash";
  13                 reg = <0x1f000000 0x800000>;
  14                 bank-width = <2>;
  15                 device-width = <2>;
  16                 #address-cells = <1>;
  17                 #size-cells = <1>;
  18
  19                 partition@0 {
  20                         label = "u-boot";
  21                         reg = <0x0 0x30000>;
  22                         read-only;
  23                 };
  24
  25                 partition@30000 {
  26                         label = "u-boot-env";
  27                         reg = <0x30000 0x10000>;
  28                         read-only;
  29                 };
  30
  31                 factory: partition@40000 {
  32                         label = "factory";
  33                         reg = <0x40000 0x10000>;
  34                         read-only;
  35                 };
  36
  37                 partition@50000 {
  38                         label = "firmware";
  39                         reg = <0x50000 0x3b0000>;
  40                 };
  41         };
  42
  43         gpio-leds {
  44                 compatible = "gpio-leds";
  45
  46                 user {
  47                         label = "wcr-150gn:amber:user";
  48                         gpios = <&gpio0 12 1>;
  49                 };
  50
  51                 power {
  52                         label = "wcr-150gn:amber:power";
  53                         gpios = <&gpio0 8 1>;
  54                 };
  55         };
  56
  57         gpio-keys-polled {
  58                 compatible = "gpio-keys-polled";
  59                 #address-cells = <1>;
  60                 #size-cells = <0>;
  61                 poll-interval = <20>;
  62
  63                 wps {
  64                         label = "wps";
  65                         gpios = <&gpio0 10 1>;
  66                         linux,code = <KEY_WPS_BUTTON>;
  67                 };
  68
  69                 reset {
  70                         label = "reset";
  71                         gpios = <&gpio0 0 1>;
  72                         linux,code = <KEY_RESTART>;
  73                 };
  74         };
  75 };
  76
  77 &pinctrl {
  78         state_default: pinctrl0 {
  79                 gpio {
  80                         ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  81                         ralink,function = "gpio";
  82                 };
  83         };
  84 };
  85
  86 &ethernet {
  87         mtd-mac-address = <&factory 0x4>;
  88 };
  89
  90 &esw {
  91         mediatek,portmap = <0x2f>;
  92 };
  93
  94 &wmac {
  95         ralink,mtd-eeprom = <&factory 0>;
  96 };
  97
  98 &otg {
  99         status = "okay";
 100 };