target/linux/ramips/dts/UR-336UN.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "UR-336UN", "ralink,rt3052-soc";
   9         model = "UPVEL UR-336UN";
  10
  11         cfi@1f000000 {
  12                 compatible = "cfi-flash";
  13                 reg = <0x1f000000 0x800000>;
  14                 bank-width = <2>;
  15                 device-width = <2>;
  16                 #address-cells = <1>;
  17                 #size-cells = <1>;
  18         };
  19
  20         gpio-leds {
  21                 compatible = "gpio-leds";
  22
  23                 3g {
  24                         label = "ur-336un:green:3g";
  25                         gpios = <&gpio0 9 1>;
  26                 };
  27
  28                 gateway {
  29                         label = "ur-336un:green:gateway";
  30                         gpios = <&gpio0 11 1>;
  31                 };
  32
  33                 ap {
  34                         label = "ur-336un:green:ap";
  35                         gpios = <&gpio0 12 1>;
  36                 };
  37
  38                 wps {
  39                         label = "ur-336un:green:wps";
  40                         gpios = <&gpio0 14 1>;
  41                 };
  42
  43                 station {
  44                         label = "ur-336un:green:station";
  45                         gpios = <&gpio0 13 1>;
  46                 };
  47         };
  48
  49         gpio-keys-polled {
  50                 compatible = "gpio-keys-polled";
  51                 #address-cells = <1>;
  52                 #size-cells = <0>;
  53                 poll-interval = <20>;
  54
  55                 reset_wps {
  56                         label = "reset_wps";
  57                         gpios = <&gpio0 10 1>;
  58                         linux,code = <KEY_RESTART>;
  59                 };
  60
  61                 mode {
  62                         label = "mode";
  63                         gpios = <&gpio0 7 1>;
  64                         linux,code = <BTN_0>;
  65                 };
  66         };
  67 };
  68
  69 &pinctrl {
  70         state_default: pinctrl0 {
  71                 gpio {
  72                         ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  73                         ralink,function = "gpio";
  74                 };
  75         };
  76 };
  77
  78 /* FIXME: no partitions defined */
  79 /*&ethernet {
  80         mtd-mac-address = <&factory 0x4004>;
  81 };
  82 */
  83 &esw {
  84         mediatek,portmap = <0x2f>;
  85 };
  86
  87 /* FIXME: no partitions defined */
  88 /*&wmac {
  89         ralink,mtd-eeprom = <&factory 0>;
  90 };
  91 */
  92 &otg {
  93         status = "okay";
  94 };