target/linux/ramips/dts/TEW-692GR.dts

   1 /dts-v1/;
   2
   3 #include "rt3883.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "TEW-692GR", "ralink,rt3883-soc";
   9         model = "TRENDnet TEW-692GR";
  10
  11         nor-flash@1c000000 {
  12                 compatible = "cfi-flash";
  13                 reg = <0x1c000000 0x800000>;
  14                 bank-width = <2>;
  15                 #address-cells = <1>;
  16                 #size-cells = <1>;
  17
  18                 partition@0 {
  19                         reg = <0x0 0x0030000>;
  20                         label = "u-boot";
  21                         read-only;
  22                 };
  23
  24                 partition@30000 {
  25                         reg = <0x00030000 0x00010000>;
  26                         label = "u-boot-env";
  27                         read-only;
  28                 };
  29
  30                 factory: partition@40000 {
  31                         reg = <0x00040000 0x00010000>;
  32                         label = "factory";
  33                         read-only;
  34                 };
  35
  36                 partition@50000 {
  37                         reg = <0x00050000 0x007b0000>;
  38                         label = "firmware";
  39                 };
  40         };
  41
  42         gpio-keys-polled {
  43                 compatible = "gpio-keys-polled";
  44                 #address-cells = <1>;
  45                 #size-cells = <0>;
  46                 poll-interval = <100>;
  47
  48                 reset {
  49                         label = "reset";
  50                         gpios = <&gpio0 10 1>;
  51                         linux,code = <KEY_RESTART>;
  52                 };
  53
  54                 wps {
  55                         label = "wps";
  56                         gpios = <&gpio1 2 1>;
  57                         linux,code = <KEY_WPS_BUTTON>;
  58                 };
  59         };
  60
  61         gpio-leds {
  62                 compatible = "gpio-leds";
  63
  64                 wps {
  65                         label = "tew-692gr:orange:wps";
  66                         gpios = <&gpio0 9 1>;
  67                 };
  68
  69                 wps2 {
  70                         label = "tew-692gr:green:wps";
  71                         gpios = <&gpio1 4 1>;
  72                 };
  73         };
  74 };
  75
  76 &gpio1 {
  77         status = "okay";
  78 };
  79
  80 &pinctrl {
  81         state_default: pinctrl0 {
  82                 gpio {
  83                         ralink,group = "spi", "i2c", "jtag", "uartf";
  84                         ralink,function = "gpio";
  85                 };
  86         };
  87 };
  88
  89 &ethernet {
  90         status = "okay";
  91         mtd-mac-address = <&factory 0x4>;
  92
  93         port@0 {
  94                 phy-handle = <&phy0>;
  95                 phy-mode = "rgmii";
  96         };
  97
  98         mdio-bus {
  99                 status = "okay";
 100
 101                 phy0: ethernet-phy@0 {
 102                         reg = <0>;
 103                         phy-mode = "rgmii";
 104
 105                         qca,ar8327-initvals = <
 106                                 0x04 0x07600000 /* PORT0 PAD MODE CTRL */
 107                                 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
 108                                 0x10 0x40000000 /* Power-on Strapping: 176-pin interface configuration */
 109                                 0x50 0xc437c437 /* LED Control Register 0 */
 110                                 0x54 0xc337c337 /* LED Control Register 1 */
 111                                 0x58 0x00000000 /* LED Control Register 2 */
 112                                 0x5c 0x03ffff00 /* LED Control Register 3 */
 113                                 0x7c 0x0000007e /* PORT0_STATUS */
 114                                 0x94 0x0000007e /* PORT6 STATUS */
 115                         >;
 116                 };
 117         };
 118 };
 119
 120 &pci {
 121         status = "okay";
 122         pinctrl-names = "default";
 123         pinctrl-0 = <&pci_pins>;
 124
 125         pci_pins: pci {
 126                 pci {
 127                         ralink,group = "pci";
 128                         ralink,function = "pci-fnc";
 129                 };
 130         };
 131
 132         host-bridge {
 133                 pci-bridge@1 {
 134                         status = "okay";
 135
 136                         wifi@0,0 {
 137                                 compatible = "pci0,0";
 138                                 reg = < 0x10000 0 0 0 0 >;
 139                                 ralink,2ghz = <0>;
 140                         };
 141                 };
 142         };
 143 };
 144
 145 &wmac {
 146         status = "okay";
 147         ralink,mtd-eeprom = <&factory 0x0>;
 148         ralink,5ghz = <0>;
 149         mtd-mac-address = <&factory 0x4>;
 150         mtd-mac-address-increment = <3>;
 151 };