target/linux/ramips/dts/PSR-680W.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "PSR-680W", "ralink,rt3052-soc";
   9         model = "Petatel PSR-680W Wireless 3G Router";
  10
  11         chosen {
  12                 bootargs = "console=ttyS0,115200";
  13         };
  14
  15         cfi@1f000000 {
  16                 compatible = "cfi-flash";
  17                 reg = <0x1f000000 0x800000>;
  18                 bank-width = <2>;
  19                 device-width = <2>;
  20                 #address-cells = <1>;
  21                 #size-cells = <1>;
  22
  23                 partition@0 {
  24                         label = "u-boot";
  25                         reg = <0x0 0x30000>;
  26                         read-only;
  27                 };
  28
  29                 partition@30000 {
  30                         label = "u-boot-env";
  31                         reg = <0x30000 0x10000>;
  32                         read-only;
  33                 };
  34
  35                 factory: partition@40000 {
  36                         label = "factory";
  37                         reg = <0x40000 0x10000>;
  38                         read-only;
  39                 };
  40
  41                 partition@50000 {
  42                         label = "firmware";
  43                         reg = <0x50000 0x3b0000>;
  44                 };
  45         };
  46
  47         gpio-leds {
  48                 compatible = "gpio-leds";
  49
  50                 wan {
  51                         label = "psr-680w:red:wan";
  52                         gpios = <&gpio0 19 1>;
  53                 };
  54         };
  55
  56         gpio-keys-polled {
  57                 compatible = "gpio-keys-polled";
  58                 #address-cells = <1>;
  59                 #size-cells = <0>;
  60                 poll-interval = <20>;
  61
  62                 reset {
  63                         label = "reset";
  64                         gpios = <&gpio0 0 1>;
  65                         linux,code = <KEY_RESTART>;
  66                 };
  67         };
  68 };
  69
  70 &pinctrl {
  71         state_default: pinctrl0 {
  72                 gpio {
  73                         ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  74                         ralink,function = "gpio";
  75                 };
  76         };
  77 };
  78
  79 &ethernet {
  80         mtd-mac-address = <&factory 0x4>;
  81 };
  82
  83 &esw {
  84         mediatek,portmap = <0x3e>;
  85 };
  86
  87 &wmac {
  88         ralink,mtd-eeprom = <&factory 0>;
  89 };
  90
  91 &otg {
  92         status = "okay";
  93 };