target/linux/ramips/dts/NCS601W.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 / {
   6         compatible = "NCS601W", "ralink,rt5350-soc";
   7         model = "Wansview NCS601W";
   8 };
   9
  10 &spi0 {
  11         status = "okay";
  12
  13         m25p80@0 {
  14                 #address-cells = <1>;
  15                 #size-cells = <1>;
  16                 compatible = "jedec,spi-nor";
  17                 reg = <0>;
  18                 linux,modalias = "m25p80", "s25fl064k";
  19                 spi-max-frequency = <10000000>;
  20
  21                 partition@0 {
  22                         label = "u-boot";
  23                         reg = <0x0 0x30000>;
  24                         read-only;
  25                 };
  26
  27                 partition@30000 {
  28                         label = "u-boot-env";
  29                         reg = <0x30000 0x10000>;
  30                         read-only;
  31                 };
  32
  33                 factory: partition@40000 {
  34                         label = "factory";
  35                         reg = <0x40000 0x10000>;
  36                         read-only;
  37                 };
  38
  39                 partition@50000 {
  40                         label = "firmware";
  41                         reg = <0x50000 0x7b0000>;
  42                 };
  43         };
  44 };
  45
  46 &pinctrl {
  47         state_default: pinctrl0 {
  48                 gpio {
  49                         ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
  50                         ralink,function = "gpio";
  51                 };
  52         };
  53 };
  54
  55 &ethernet {
  56         mtd-mac-address = <&factory 0x4>;
  57 };
  58
  59 &esw {
  60         mediatek,portmap = <0x2f>;
  61 };
  62
  63 &wmac {
  64         ralink,mtd-eeprom = <&factory 0>;
  65 };
  66
  67 &ehci {
  68         status = "okay";
  69 };
  70
  71 &ohci {
  72         status = "okay";
  73 };