target/linux/ramips/dts/NA930.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
   9         model = "Sercomm NA930";
  10
  11         chosen {
  12                 bootargs = "console=ttyS1,57600";
  13         };
  14
  15         nand {
  16                 #address-cells = <1>;
  17                 #size-cells = <1>;
  18                 compatible = "mtk,mt7620-nand";
  19
  20                 partition@0 {
  21                         label = "u-boot";
  22                         reg = <0x0 0x20000>;
  23                         read-only;
  24                 };
  25
  26                 partition@200000 {
  27                         label = "factory";
  28                         reg = <0x200000 0x40000>;
  29                         read-only;
  30                 };
  31
  32                 partition@240000 {
  33                         label = "Config";
  34                         reg = <0x240000 0x400000>;
  35                         read-only;
  36                 };
  37
  38                 partition@640000 {
  39                         label = "firmware";
  40                         reg = <0x640000 0x1400000>;
  41                 };
  42         };
  43
  44         gpio-keys-polled {
  45                 compatible = "gpio-keys-polled";
  46                 #address-cells = <1>;
  47                 #size-cells = <0>;
  48                 poll-interval = <20>;
  49
  50                 reset {
  51                         label = "reset";
  52                         gpios = <&gpio0 11 1>;
  53                         linux,code = <KEY_RESTART>;
  54                 };
  55
  56                 zwave {
  57                         label = "zwave";
  58                         gpios = <&gpio0 12 1>;
  59                         linux,code = <BTN_0>;
  60                 };
  61
  62                 wps {
  63                         label = "wps";
  64                         gpios = <&gpio0 14 1>;
  65                         linux,code = <KEY_WPS_BUTTON>;
  66                 };
  67         };
  68
  69         gpio-leds {
  70                 compatible = "gpio-leds";
  71
  72                 zwave {
  73                         label = "na930:blue:zwave";
  74                         gpios = <&gpio2 0 1>;
  75                 };
  76
  77                 status {
  78                         label = "na930:blue:status";
  79                         gpios = <&gpio2 26 1>;
  80                 };
  81
  82                 service {
  83                         label = "na930:blue:service";
  84                         gpios = <&gpio2 28 1>;
  85                 };
  86
  87                 power {
  88                         label = "na930:blue:power";
  89                         gpios = <&gpio2 29 1>;
  90                 };
  91         };
  92
  93         gpio_export {
  94                 compatible = "gpio-export";
  95                 #size-cells = <0>;
  96
  97                 telit {
  98                         gpio-export,name = "telit";
  99                         gpio-export,output = <1>;
 100                         gpios = <&gpio0 13 0>;
 101                 };
 102         };
 103 };
 104
 105 &pinctrl {
 106         state_default: pinctrl0 {
 107                 gpio {
 108                         ralink,group = "i2c", "rgmii2", "spi", "ephy";
 109                         ralink,function = "gpio";
 110                 };
 111
 112                 uartf_gpio {
 113                         ralink,group = "uartf";
 114                         ralink,function = "gpio uartf";
 115                 };
 116         };
 117 };
 118
 119 &uart {
 120         status = "okay";
 121 };
 122
 123 &gpio1 {
 124         status = "okay";
 125 };
 126
 127 &gpio2 {
 128         status = "okay";
 129 };
 130
 131 &ethernet {
 132         status = "okay";
 133         pinctrl-names = "default";
 134         pinctrl-0 = <&rgmii1_pins &mdio_pins>;
 135         mediatek,portmap = "llllw";
 136
 137         port@4 {
 138                 status = "okay";
 139                 phy-handle = <&phy4>;
 140                 phy-mode = "rgmii";
 141         };
 142
 143         port@5 {
 144                 status = "okay";
 145                 phy-handle = <&phy5>;
 146                 phy-mode = "rgmii";
 147         };
 148
 149         mdio-bus {
 150                 status = "okay";
 151
 152                 phy4: ethernet-phy@4 {
 153                         reg = <4>;
 154                         phy-mode = "rgmii";
 155                 };
 156
 157                 phy5: ethernet-phy@5 {
 158                         reg = <5>;
 159                         phy-mode = "rgmii";
 160                 };
 161         };
 162 };
 163
 164 &gsw {
 165         mediatek,port4 = "gmac";
 166 };
 167
 168 &ehci {
 169         status = "okay";
 170 };
 171
 172 &ohci {
 173         status = "okay";
 174 };