target/linux/ramips/dts/MZK-EX750NP.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "ralink,mt7620a-soc";
   9         model = "Planex MZK-EX750NP";
  10
  11         gpio-leds {
  12                 compatible = "gpio-leds";
  13
  14                 power {
  15                         label = "mzk-ex750np:red:power";
  16                         gpios = <&gpio0 14 1>;
  17                 };
  18
  19                 wifi {
  20                         label = "mzk-ex750np:red:wifi";
  21                         gpios = <&gpio3 0 1>;
  22                 };
  23
  24                 wps {
  25                         label = "mzk-ex750np:green:wps";
  26                         gpios = <&gpio0 10 1>;
  27                 };
  28
  29                 rep {
  30                         label = "mzk-ex750np:blue:rep";
  31                         gpios = <&gpio2 16 1>;
  32                 };
  33
  34                 wifi1 {
  35                         label = "mzk-ex750np:blue:wifi1";
  36                         gpios = <&gpio2 19 1>;
  37                 };
  38
  39                 wifi2 {
  40                         label = "mzk-ex750np:blue:wifi2";
  41                         gpios = <&gpio2 18 1>;
  42                 };
  43
  44                 wifi3 {
  45                         label = "mzk-ex750np:blue:wifi3";
  46                         gpios = <&gpio2 17 1>;
  47                 };
  48         };
  49
  50         gpio-keys-polled {
  51                 compatible = "gpio-keys-polled";
  52                 #address-cells = <1>;
  53                 #size-cells = <0>;
  54                 poll-interval = <20>;
  55
  56                 reset {
  57                         label = "reset";
  58                         gpios = <&gpio0 9 1>;
  59                         linux,code = <KEY_RESTART>;
  60                 };
  61
  62                 wps {
  63                         label = "wps";
  64                         gpios = <&gpio0 13 0>;
  65                         linux,code = <KEY_RFKILL>;
  66                 };
  67         };
  68 };
  69
  70 &gpio2 {
  71         status = "okay";
  72 };
  73
  74 &gpio3 {
  75         status = "okay";
  76 };
  77
  78 &spi0 {
  79         status = "okay";
  80
  81         m25p80@0 {
  82                 #address-cells = <1>;
  83                 #size-cells = <1>;
  84                 compatible = "jedec,spi-nor";
  85                 reg = <0>;
  86                 linux,modalias = "m25p80", "w25q64";
  87                 spi-max-frequency = <10000000>;
  88
  89                 partition@0 {
  90                         label = "u-boot";
  91                         reg = <0x0 0x30000>;
  92                         read-only;
  93                 };
  94
  95                 partition@30000 {
  96                         label = "u-boot-env";
  97                         reg = <0x30000 0x10000>;
  98                         read-only;
  99                 };
 100
 101                 factory: partition@40000 {
 102                         label = "factory";
 103                         reg = <0x40000 0x10000>;
 104                         read-only;
 105                 };
 106
 107                 partition@50000 {
 108                         label = "firmware";
 109                         reg = <0x50000 0x730000>;
 110                 };
 111
 112                 partition@780000 {
 113                         label = "Udata";
 114                         reg = <0x780000 0x80000>;
 115                 };
 116         };
 117 };
 118
 119 &pinctrl {
 120         state_default: pinctrl0 {
 121                 gpio {
 122                         ralink,group = "uartf", "nd_sd", "rgmii2", "wled";
 123                         ralink,function = "gpio";
 124                 };
 125         };
 126 };
 127
 128 &ethernet {
 129         pinctrl-names = "default";
 130         pinctrl-0 = <&ephy_pins>;
 131         mtd-mac-address = <&factory 0x4>;
 132         mediatek,portmap = "llllw";
 133 };
 134
 135 &wmac {
 136         ralink,mtd-eeprom = <&factory 0>;
 137 };
 138
 139 &pcie {
 140         status = "okay";
 141
 142         pcie-bridge {
 143                 mt76@0,0 {
 144                         reg = <0x0000 0 0 0 0>;
 145                         device_type = "pci";
 146                         mediatek,mtd-eeprom = <&factory 0x8000>;
 147                         mediatek,2ghz = <0>;
 148                 };
 149         };
 150 };