target/linux/ramips/dts/MAC1200RV2.dts

   1 /dts-v1/;
   2
   3 #include "mt7628an.dtsi"
   4
   5 / {
   6         compatible = "mercury,mac1200rv2", "mediatek,mt7628an-soc";
   7         model = "Mercury MAC1200R v2";
   8
   9         chosen {
  10                 bootargs = "console=ttyS0,57600";
  11         };
  12
  13         memory@0 {
  14                 device_type = "memory";
  15                 reg = <0x0 0x2000000>;
  16         };
  17
  18         gpio-leds {
  19                 compatible = "gpio-leds";
  20                 status {
  21                         label = "mac1200rv2:green:status";
  22                         gpios = <&gpio0 11 1>;
  23                 };
  24         };
  25 };
  26
  27 &spi0 {
  28         status = "okay";
  29
  30         m25p80@0 {
  31                 #address-cells = <1>;
  32                 #size-cells = <1>;
  33                 compatible = "w25q128";
  34                 reg = <0 0>;
  35                 linux,modalias = "m25p80", "w25q128";
  36                 spi-max-frequency = <10000000>;
  37                 m25p,chunked-io = <32>;
  38
  39                 partition@0 {
  40                         label = "u-boot";
  41                         reg = <0x0 0x1d800>;
  42                 };
  43
  44                 factory: partition@0x1d800 {
  45                         label = "factory_info";
  46                         reg = <0x1d800 0x800>;
  47                         read-only;
  48                 };
  49
  50                 art: partition@0x1e000 {
  51                         label = "art";
  52                         reg = <0x1e000 0x2000>;
  53                         read-only;
  54                 };
  55
  56                 partition@20000 {
  57                         label = "config";
  58                         reg = <0x20000 0x10000>;
  59                 };
  60
  61                 partition@30000 {
  62                         label = "u-boot2";
  63                         reg = <0x30000 0x10000>;
  64                 };
  65
  66                 partition@40000 {
  67                         label = "firmware";
  68                         reg = <0x40000 0x7c0000>;
  69                 };
  70         };
  71 };
  72
  73 &ethernet {
  74         pinctrl-names = "default";
  75         mtd-mac-address = <&factory 0xd>;
  76         ralink,port-map = "llllw";
  77 };
  78
  79 &wmac {
  80         status = "okay";
  81         ralink,mtd-eeprom = <&art 0x0>;
  82 };
  83
  84 &pcie {
  85         status = "okay";
  86         pcie-bridge {
  87                 mt76@0,0 {
  88                         reg = <0x0000 0 0 0 0>;
  89                         device_type = "pci";
  90                         mediatek,mtd-eeprom = <&art 0x1000>;
  91                         mediatek,2ghz = <0>;
  92                 };
  93         };
  94 };