target/linux/ramips/dts/M2M.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "M2M", "ralink,rt5350-soc";
   9         model = "Intenso Memory 2 Move";
  10
  11         chosen {
  12                 bootargs = "console=ttyS0,57600n8 root=/dev/mtdblock5";
  13         };
  14
  15         gpio-leds {
  16                 compatible = "gpio-leds";
  17
  18                 wifi {
  19                         label = "m2m:blue:wifi";
  20                         gpios = <&gpio0 7 1>;
  21                 };
  22
  23                 wan {
  24                         label = "m2m:green:wan";
  25                         gpios = <&gpio0 12 1>;
  26                 };
  27         };
  28
  29         gpio-keys-polled {
  30                 compatible = "gpio-keys-polled";
  31                 #address-cells = <1>;
  32                 #size-cells = <0>;
  33                 poll-interval = <20>;
  34
  35                 power {
  36                         label = "power";
  37                         gpios = <&gpio0 1 1>;
  38                         linux,code = <KEY_POWER>;
  39                 };
  40
  41                 reset {
  42                         label = "reset";
  43                         gpios = <&gpio0 10 1>;
  44                         linux,code = <KEY_RESTART>;
  45                 };
  46         };
  47 };
  48
  49 &spi0 {
  50         status = "okay";
  51
  52         m25p80@0 {
  53                 #address-cells = <1>;
  54                 #size-cells = <1>;
  55                 compatible = "jedec,spi-nor";
  56                 reg = <0>;
  57                 linux,modalias = "m25p80", "mx25l6405d";
  58                 spi-max-frequency = <10000000>;
  59
  60                 partition@0 {
  61                         label = "Bootloader";
  62                         reg = <0x0 0x30000>;
  63                         read-only;
  64                 };
  65
  66                 partition@30000 {
  67                         label = "Config";
  68                         reg = <0x30000 0x10000>;
  69                         read-only;
  70                 };
  71
  72                 factory: partition@40000 {
  73                         label = "Factory";
  74                         reg = <0x40000 0x10000>;
  75                         read-only;
  76                 };
  77
  78                 partition@50000 {
  79                         label = "firmware";
  80                         reg = <0x50000 0x7b0000>;
  81                 };
  82         };
  83 };
  84
  85 &pinctrl {
  86         state_default: pinctrl0 {
  87                 gpio {
  88                         ralink,group = "i2c", "uartf";
  89                         ralink,function = "gpio";
  90                 };
  91         };
  92 };
  93
  94 &ethernet {
  95         mtd-mac-address = <&factory 0x28>;
  96 };
  97
  98 &esw {
  99         mediatek,portmap = <0x2f>;
 100 };
 101
 102 &ehci {
 103         status = "okay";
 104 };
 105
 106 &ohci {
 107         status = "okay";
 108 };
 109
 110 &wmac {
 111         ralink,mtd-eeprom = <&factory 0x0>;
 112 };