target/linux/ramips/dts/JHR-N825R.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "JHR-N825R", "ralink,rt3052-soc";
   9         model = "JCG JHR-N825R";
  10
  11         cfi@1f000000 {
  12                 compatible = "cfi-flash";
  13                 reg = <0x1f000000 0x800000>;
  14                 bank-width = <2>;
  15                 device-width = <2>;
  16                 #address-cells = <1>;
  17                 #size-cells = <1>;
  18
  19                 partition@0 {
  20                         label = "u-boot";
  21                         reg = <0x0 0x30000>;
  22                         read-only;
  23                 };
  24
  25                 partition@30000 {
  26                         label = "u-boot-env";
  27                         reg = <0x30000 0x10000>;
  28                         read-only;
  29                 };
  30
  31                 factory: partition@40000 {
  32                         label = "factory";
  33                         reg = <0x40000 0x10000>;
  34                         read-only;
  35                 };
  36
  37                 partition@50000 {
  38                         label = "firmware";
  39                         reg = <0x50000 0x3b0000>;
  40                 };
  41         };
  42
  43         gpio-leds {
  44                 compatible = "gpio-leds";
  45                 system {
  46                         label = "jhr-n825r:red:power";
  47                         gpios = <&gpio0 9 1>;
  48                 };
  49         };
  50
  51         gpio-keys-polled {
  52                 compatible = "gpio-keys-polled";
  53                 #address-cells = <1>;
  54                 #size-cells = <0>;
  55                 poll-interval = <20>;
  56                 reset_wps {
  57                         label = "reset_wps";
  58                         gpios = <&gpio0 10 1>;
  59                         linux,code = <KEY_RESTART>;
  60                 };
  61         };
  62 };
  63
  64 &pinctrl {
  65         state_default: pinctrl0 {
  66                 gpio {
  67                         ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  68                         ralink,function = "gpio";
  69                 };
  70         };
  71 };
  72
  73 &ethernet {
  74         mtd-mac-address = <&factory 0x2e>;
  75 };
  76
  77 &esw {
  78         mediatek,portmap = <0x3e>;
  79 };
  80
  81 &wmac {
  82         ralink,mtd-eeprom = <&factory 0>;
  83 };