target/linux/ramips/dts/IP2202.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "IP2202", "ralink,rt3052-soc";
   9         model = "Poray IP2202";
  10
  11         cfi@1f000000 {
  12                 compatible = "cfi-flash";
  13                 reg = <0x1f000000 0x800000>;
  14                 bank-width = <2>;
  15                 device-width = <2>;
  16                 #address-cells = <1>;
  17                 #size-cells = <1>;
  18
  19                 partition@0 {
  20                         label = "u-boot";
  21                         reg = <0x0 0x30000>;
  22                         read-only;
  23                 };
  24
  25                 partition@30000 {
  26                         label = "u-boot-env";
  27                         reg = <0x30000 0x10000>;
  28                         read-only;
  29                 };
  30
  31                 factory: partition@40000 {
  32                         label = "factory";
  33                         reg = <0x40000 0x10000>;
  34                         read-only;
  35                 };
  36
  37                 partition@50000 {
  38                         label = "firmware";
  39                         reg = <0x50000 0x7b0000>;
  40                 };
  41         };
  42
  43         gpio-leds {
  44                 compatible = "gpio-leds";
  45
  46                 run {
  47                         label = "ip2202:green:run";
  48                         gpios = <&gpio0 9 1>;
  49                 };
  50
  51                 net {
  52                         label = "ip2202:amber:net";
  53                         gpios = <&gpio0 13 1>;
  54                 };
  55         };
  56
  57         gpio-keys-polled {
  58                 compatible = "gpio-keys-polled";
  59                 #address-cells = <1>;
  60                 #size-cells = <0>;
  61                 poll-interval = <20>;
  62
  63                 reset {
  64                         label = "reset";
  65                         gpios = <&gpio0 10 1>;
  66                         linux,code = <KEY_RESTART>;
  67                 };
  68         };
  69 };
  70
  71 &pinctrl {
  72         state_default: pinctrl0 {
  73                 gpio {
  74                         ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  75                         ralink,function = "gpio";
  76                 };
  77         };
  78 };
  79
  80 &ethernet {
  81         mtd-mac-address = <&factory 0x28>;
  82 };
  83
  84 &esw {
  85         mediatek,portmap = <0x2f>;
  86 };
  87
  88 &otg {
  89         status = "okay";
  90 };