target/linux/ramips/dts/F7C027.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "F7C027", "ralink,rt5350-soc";
   9         model = "Belkin F7C027";
  10
  11         gpio-leds {
  12                 compatible = "gpio-leds";
  13
  14                 status {
  15                         label = "f7c027:blue:status";
  16                         gpios = <&gpio0 7 1>;
  17                 };
  18
  19                 power {
  20                         label = "f7c027:blue:power";
  21                         gpios = <&gpio0 9 1>;
  22                 };
  23
  24                 orange {
  25                         label = "f7c027:orange:status";
  26                         gpios = <&gpio0 11 1>;
  27                 };
  28
  29                 relay {
  30                         label = "f7c027:device:relay";
  31                         gpios = <&gpio0 13 0>;
  32                 };
  33         };
  34
  35         gpio-keys-polled {
  36                 compatible = "gpio-keys-polled";
  37                 #address-cells = <1>;
  38                 #size-cells = <0>;
  39                 poll-interval = <20>;
  40
  41                 top {
  42                         label = "restore";
  43                         gpios = <&gpio0 10 1>;
  44                         linux,code = <KEY_RESTART>;
  45                 };
  46
  47                 power {
  48                         label = "power";
  49                         gpios = <&gpio0 12 1>;
  50                         linux,code = <KEY_RFKILL>;
  51                 };
  52
  53                 sensor {
  54                         label = "sensor";
  55                         gpios = <&gpio0 14 1>;
  56                         linux,code = <BTN_0>;
  57                 };
  58         };
  59 };
  60
  61 &spi0 {
  62         status = "okay";
  63
  64         m25p80@0 {
  65                 #address-cells = <1>;
  66                 #size-cells = <1>;
  67                 compatible = "jedec,spi-nor";
  68                 reg = <0>;
  69                 linux,modalias = "m25p80", "mx25l12805d";
  70                 spi-max-frequency = <10000000>;
  71
  72                 partition@0 {
  73                         label = "u-boot";
  74                         reg = <0x0 0x30000>;
  75                         read-only;
  76                 };
  77
  78                 partition@30000 {
  79                         label = "u-boot-env";
  80                         reg = <0x30000 0x10000>;
  81                         read-only;
  82                 };
  83
  84                 factory: partition@40000 {
  85                         label = "factory";
  86                         reg = <0x40000 0x10000>;
  87                         read-only;
  88                 };
  89
  90                 partition@50000 {
  91                         label = "firmware";
  92                         reg = <0x50000 0x770000>;
  93                 };
  94
  95                 partition@7c0000 {
  96                         label = "firmware2";
  97                         reg = <0x7c0000 0x770000>;
  98                 };
  99
 100                 partition@f30000 {
 101                         label = "belkin_settings";
 102                         reg = <0xf30000 0xa0000>;
 103                 };
 104
 105                 partition@fd0000 {
 106                         label = "unknown";
 107                         reg = <0xfd0000 0x10000>;
 108                 };
 109
 110                 partition@fe0000 {
 111                         label = "nvram";
 112                         reg = <0xfe0000 0x10000>;
 113                 };
 114
 115                 partition@ff0000 {
 116                         label = "user_factory";
 117                         reg = <0xff0000 0x10000>;
 118                 };
 119         };
 120 };
 121
 122 &wmac {
 123         ralink,mtd-eeprom = <&factory 0>;
 124 };
 125
 126 &pinctrl {
 127         state_default: pinctrl0 {
 128                 gpio {
 129                         ralink,group = "i2c", "jtag", "uartf";
 130                         ralink,function = "gpio";
 131                 };
 132         };
 133 };