target/linux/ramips/dts/F5D8235_V2.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 / {
   6         compatible = "F5D8235_V2", "ralink,rt3052-soc";
   7         model = "Belkin F5D8235 v2";
   8
   9         cfi@1f000000 {
  10                 compatible = "cfi-flash";
  11                 reg = <0x1f000000 0x800000>;
  12                 bank-width = <2>;
  13                 device-width = <2>;
  14                 #address-cells = <1>;
  15                 #size-cells = <1>;
  16
  17                 uboot: partition@0 {
  18                         label = "uboot";
  19                         reg = <0x0 0x50000>;
  20                         read-only;
  21                 };
  22
  23                 partition@50000 {
  24                         label = "firmware";
  25                         reg = <0x50000 0x790000>;
  26                 };
  27
  28                 partition@7e0000 {
  29                         label = "nvram";
  30                         reg = <0x7e0000 0x10000>;
  31                 };
  32
  33                 factory: partition@7f0000 {
  34                         label = "factory";
  35                         reg = <0x7f0000 0x10000>;
  36                 };
  37         };
  38
  39         rtl8366rb {
  40                 compatible = "rtl8366rb";
  41                 gpio-sda = <&gpio0 1 0>;
  42                 gpio-sck = <&gpio0 2 0>;
  43         };
  44
  45         gpio-leds {
  46                 compatible = "gpio-leds";
  47
  48                 internet {
  49                         label = "f5d8235-v2:blue:internet";
  50                         gpios = <&gpio0 5 1>;
  51                 };
  52
  53                 internet2 {
  54                         label = "f5d8235-v2:amber:internet";
  55                         gpios = <&gpio0 6 1>;
  56                 };
  57
  58                 modem {
  59                         label = "f5d8235-v2:blue:modem";
  60                         gpios = <&gpio0 11 1>;
  61                 };
  62
  63                 modem2 {
  64                         label = "f5d8235-v2:amber:modem";
  65                         gpios = <&gpio0 8 1>;
  66                 };
  67
  68                 router {
  69                         label = "f5d8235-v2:blue:router";
  70                         gpios = <&gpio0 9 1>;
  71                 };
  72
  73                 storage {
  74                         label = "f5d8235-v2:blue:storage";
  75                         gpios = <&gpio0 23 1>;
  76                 };
  77
  78                 storage2 {
  79                         label = "f5d8235-v2:amber:storage";
  80                         gpios = <&gpio0 22 1>;
  81                 };
  82
  83                 security {
  84                         label = "f5d8235-v2:blue:security";
  85                         gpios = <&gpio0 13 1>;
  86                 };
  87
  88                 security2 {
  89                         label = "f5d8235-v2:amber:security";
  90                         gpios = <&gpio0 12 1>;
  91                 };
  92         };
  93 };
  94
  95 &pinctrl {
  96         state_default: pinctrl0 {
  97                 gpio {
  98                         ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  99                         ralink,function = "gpio";
 100                 };
 101         };
 102 };
 103
 104 &ethernet {
 105         mtd-mac-address = <&uboot 0x40004>;
 106 };
 107
 108 &esw {
 109         mediatek,portmap = <0x3f>;
 110 };
 111
 112 &wmac {
 113         ralink,mtd-eeprom = <&uboot 0x40000>;
 114 };
 115
 116 &otg {
 117         status = "okay";
 118 };