target/linux/ramips/dts/DIR-860L-B1.dts

   1 /dts-v1/;
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "D-Link DIR-860L B1";
   9
  10         memory@0 {
  11                 device_type = "memory";
  12                 reg = <0x0 0x8000000>;
  13         };
  14
  15         chosen {
  16                 bootargs = "console=ttyS0,57600";
  17         };
  18
  19         gpio-leds {
  20                 compatible = "gpio-leds";
  21
  22                 power {
  23                         label = "dir-860l-b1:orange:power";
  24                         gpios = <&gpio0 13 1>;
  25                 };
  26
  27                 power2 {
  28                         label = "dir-860l-b1:green:power";
  29                         gpios = <&gpio0 15 1>;
  30                 };
  31
  32                 net {
  33                         label = "dir-860l-b1:orange:net";
  34                         gpios = <&gpio0 14 1>;
  35                 };
  36
  37                 net2 {
  38                         label = "dir-860l-b1:green:net";
  39                         gpios = <&gpio0 16 1>;
  40                 };
  41         };
  42
  43         gpio-keys-polled {
  44                 compatible = "gpio-keys-polled";
  45                 #address-cells = <1>;
  46                 #size-cells = <0>;
  47                 poll-interval = <20>;
  48
  49                 reset {
  50                         label = "reset";
  51                         gpios = <&gpio0 7 1>;
  52                         linux,code = <KEY_RESTART>;
  53                 };
  54
  55                 wps {
  56                         label = "wps";
  57                         gpios = <&gpio0 18 1>;
  58                         linux,code = <KEY_WPS_BUTTON>;
  59                 };
  60         };
  61 };
  62
  63 &spi0 {
  64         status = "okay";
  65
  66         m25p80@0 {
  67                 #address-cells = <1>;
  68                 #size-cells = <1>;
  69                 compatible = "jedec,spi-nor";
  70                 reg = <0>;
  71                 spi-max-frequency = <10000000>;
  72                 m25p,chunked-io = <32>;
  73
  74                 partition@0 {
  75                         label = "u-boot";
  76                         reg = <0x0 0x30000>;
  77                         read-only;
  78                 };
  79
  80                 partition@30000 {
  81                         label = "u-boot-env";
  82                         reg = <0x30000 0x4000>;
  83                         read-only;
  84                 };
  85
  86                 radio: partition@34000 {
  87                         label = "radio";
  88                         reg = <0x34000 0x4000>;
  89                         read-only;
  90                 };
  91
  92                 factory: partition@38000 {
  93                         label = "factory";
  94                         reg = <0x38000 0x8000>;
  95                         read-only;
  96                 };
  97
  98                 partition@40000 {
  99                         label = "defaults";
 100                         reg = <0x40000 0x10000>;
 101                         read-only;
 102                 };
 103
 104                 partition@50000 {
 105                         label = "firmware";
 106                         reg = <0x50000 0xfb0000>;
 107                 };
 108         };
 109 };
 110
 111 &pcie {
 112         status = "okay";
 113
 114         pcie0 {
 115                 mt76@0,0 {
 116                         reg = <0x0000 0 0 0 0>;
 117                         device_type = "pci";
 118                         mediatek,mtd-eeprom = <&radio 0x2000>;
 119                         mediatek,2ghz = <0>;
 120                 };
 121         };
 122
 123         pcie1 {
 124                 mt76@1,0 {
 125                         reg = <0x0000 0 0 0 0>;
 126                         device_type = "pci";
 127                         mediatek,mtd-eeprom = <&radio 0>;
 128                         mediatek,5ghz = <0>;
 129                 };
 130         };
 131 };
 132
 133 &pinctrl {
 134         state_default: pinctrl0 {
 135                 gpio {
 136                         ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
 137                         ralink,function = "gpio";
 138                 };
 139         };
 140 };