target/linux/ramips/dts/DIR-810L.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "dlink,dir-810l", "ralink,mt7620a-soc";
   9         model = "D-Link DIR-810L";
  10
  11         gpio-keys-polled {
  12                 compatible = "gpio-keys-polled";
  13                 #address-cells = <1>;
  14                 #size-cells = <0>;
  15                 poll-interval = <20>;
  16
  17                 reset {
  18                         label = "reset";
  19                         gpios = <&gpio0 1 1>;
  20                         linux,code = <BTN_0>;
  21                 };
  22
  23                 wps {
  24                         label = "wps";
  25                         gpios = <&gpio0 2 1>;
  26                         linux,code = <BTN_0>;
  27                 };
  28         };
  29
  30         gpio-leds {
  31                 compatible = "gpio-leds";
  32
  33                 power {
  34                         label = "dir-810l:green:power";
  35                         gpios = <&gpio0 9 0>;
  36                 };
  37
  38                 wan {
  39                         label = "dir-810l:orange:wan";
  40                         gpios = <&gpio0 12 0>;
  41                 };
  42
  43                 status {
  44                         label = "dir-810l:orange:power";
  45                         gpios = <&gpio0 13 0>;
  46                 };
  47         };
  48 };
  49
  50 &spi0 {
  51         status = "okay";
  52
  53         m25p80@0 {
  54                 #address-cells = <1>;
  55                 #size-cells = <1>;
  56                 compatible = "jedec,spi-nor";
  57                 reg = <0>;
  58                 linux,modalias = "m25p80";
  59                 spi-max-frequency = <10000000>;
  60
  61                 partition@0 {
  62                         label = "u-boot";
  63                         reg = <0x0 0x30000>;
  64                         read-only;
  65                 };
  66
  67                 partition@30000 {
  68                         label = "u-boot-env";
  69                         reg = <0x30000 0x10000>;
  70                         read-only;
  71                 };
  72
  73                 factory: partition@40000 {
  74                         label = "factory";
  75                         reg = <0x40000 0x10000>;
  76                         read-only;
  77                 };
  78
  79                 factory5g: partition@50000 {
  80                         label = "factory5g";
  81                         reg = <0x50000 0x10000>;
  82                         read-only;
  83                 };
  84
  85                 partition@60000 {
  86                         label = "Wolf_Config";
  87                         reg = <0x60000 0x10000>;
  88                         read-only;
  89                 };
  90
  91                 partition@70000 {
  92                         label = "MyDlink";
  93                         reg = <0x70000 0x80000>;
  94                         read-only;
  95                 };
  96
  97                 partition@e0000 {
  98                         label = "Jffs2";
  99                         reg = <0xe0000 0x80000>;
 100                         read-only;
 101                 };
 102
 103                 partition@170000 {
 104                         label = "firmware";
 105                         reg = <0x170000 0x690000>;
 106                 };
 107         };
 108 };
 109
 110 &pinctrl {
 111         state_default: pinctrl0 {
 112                 gpio {
 113                         ralink,group = "mdio", "rgmii1", "i2c", "wled", "uartf";
 114                         ralink,function = "gpio";
 115                 };
 116         };
 117 };
 118
 119 &ethernet {
 120         mtd-mac-address = <&factory 0x28>;
 121         mediatek,portmap = "llllw";
 122 };
 123
 124 &gsw {
 125         mediatek,port4 = "ephy";
 126         pinctrl-names = "default";
 127         pinctrl-0 = <&ephy_pins>;
 128 };
 129
 130 &pcie {
 131         status = "okay";
 132 };
 133
 134 &wmac {
 135         ralink,mtd-eeprom = <&factory 0>;
 136 };