target/linux/ramips/dts/DIR-610-A1.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "DIR-610-A1", "ralink,rt5350-soc";
   9         model = "D-Link DIR-610 A1";
  10
  11         gpio-leds {
  12                 compatible = "gpio-leds";
  13
  14                 status {
  15                         label = "dir-610-a1:green:status";
  16                         gpios = <&gpio0 9 1>;
  17                 };
  18
  19                 wps {
  20                         label = "dir-610-a1:green:wps";
  21                         gpios = <&gpio0 13 1>;
  22                 };
  23         };
  24
  25         gpio-keys-polled {
  26                 compatible = "gpio-keys-polled";
  27                 #address-cells = <1>;
  28                 #size-cells = <0>;
  29                 poll-interval = <20>;
  30
  31                 reset {
  32                         label = "reset";
  33                         gpios = <&gpio0 10 1>;
  34                         linux,code = <KEY_RESTART>;
  35                 };
  36
  37                 wps {
  38                         label = "wps";
  39                         gpios = <&gpio0 0 1>;
  40                         linux,code = <KEY_WPS_BUTTON>;
  41                 };
  42         };
  43 };
  44
  45 &spi0 {
  46         status = "okay";
  47
  48         m25p80@0 {
  49                 #address-cells = <1>;
  50                 #size-cells = <1>;
  51                 compatible = "jedec,spi-nor";
  52                 reg = <0>;
  53                 linux,modalias = "m25p80";
  54                 spi-max-frequency = <10000000>;
  55
  56                 partition@0 {
  57                         label = "u-boot";
  58                         reg = <0x0 0x30000>;
  59                         read-only;
  60                 };
  61
  62                 devdata: partition@30000 {
  63                         label = "devdata";
  64                         reg = <0x30000 0x10000>;
  65                         read-only;
  66                 };
  67
  68                 factory: partition@40000 {
  69                         label = "factory";
  70                         reg = <0x40000 0x10000>;
  71                         read-only;
  72                 };
  73
  74                 partition@50000 {
  75                         label = "firmware";
  76                         reg = <0x50000 0x3b0000>;
  77                 };
  78         };
  79 };
  80
  81 &pinctrl {
  82         state_default: pinctrl0 {
  83                 gpio {
  84                         ralink,group = "i2c", "jtag", "uartf";
  85                         ralink,function = "gpio";
  86                 };
  87         };
  88 };
  89
  90 &ethernet {
  91         mtd-mac-address = <&devdata 0x4004>;
  92 };
  93
  94 &esw {
  95         status = "okay";
  96         mediatek,portmap = <0x2f>;
  97         mediatek,led_polarity = <0x17>;
  98 };
  99
 100 &wmac {
 101         status = "okay";
 102         ralink,led-polarity = <1>;
 103         ralink,mtd-eeprom = <&devdata 0x4000>;
 104 };