target/linux/ramips/dts/CS-QR10.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "ralink,mt7620a-soc";
   9         model = "Planex CS-QR10";
  10
  11         sound {
  12                 compatible = "mediatek,mt7620-audio-wm8960";
  13                 model = "mt7620-wm8960";
  14                 i2s-controller = <&i2s>;
  15                 audio-routing =
  16                         "Ext Spk", "SPK_LP",
  17                         "Ext Spk", "SPK_LN",
  18                         "Ext Spk", "SPK_RP",
  19                         "Ext Spk", "SPK_RN";
  20         };
  21
  22         gpio-leds {
  23                 compatible = "gpio-leds";
  24
  25                 power {
  26                         label = "cs-qr10:red:power";
  27                         gpios = <&gpio1 4 1>;
  28                 };
  29         };
  30
  31         gpio-keys-polled {
  32                 compatible = "gpio-keys-polled";
  33                 #address-cells = <1>;
  34                 #size-cells = <0>;
  35                 poll-interval = <20>;
  36
  37                 s1 {
  38                         label = "reset";
  39                         gpios = <&gpio1 1 1>;
  40                         linux,code = <KEY_RESTART>;
  41                 };
  42
  43                 s2 {
  44                         label = "wps";
  45                         gpios = <&gpio1 3 1>;
  46                         linux,code = <KEY_WPS_BUTTON>;
  47                 };
  48         };
  49 };
  50
  51 &gpio0 {
  52         status = "okay";
  53 };
  54
  55 &gpio1 {
  56         status = "okay";
  57 };
  58
  59 &gpio2 {
  60         status = "okay";
  61 };
  62
  63 &gpio3 {
  64         status = "okay";
  65 };
  66
  67 &i2c {
  68         status = "okay";
  69 };
  70
  71 &i2s {
  72         status = "okay";
  73         pinctrl-names = "default";
  74         pinctrl-0 = <&pcm_i2s_pins>;
  75 };
  76
  77 &spi0 {
  78         status = "okay";
  79
  80         m25p80@0 {
  81                 #address-cells = <1>;
  82                 #size-cells = <1>;
  83                 compatible = "jedec,spi-nor";
  84                 reg = <0>;
  85                 linux,modalias = "m25p80", "mx25l6405d";
  86                 spi-max-frequency = <10000000>;
  87
  88                 partition@0 {
  89                         label = "u-boot";
  90                         reg = <0x0 0x30000>;
  91                         read-only;
  92                 };
  93
  94                 partition@30000 {
  95                         label = "u-boot-env";
  96                         reg = <0x30000 0x10000>;
  97                         read-only;
  98                 };
  99
 100                 factory: partition@40000 {
 101                         label = "factory";
 102                         reg = <0x40000 0x10000>;
 103                         read-only;
 104                 };
 105
 106                 partition@50000 {
 107                         label = "firmware";
 108                         reg = <0x50000 0x7b0000>;
 109                 };
 110         };
 111 };
 112
 113 &pcm {
 114         status = "okay";
 115 };
 116
 117 &gdma {
 118         status = "okay";
 119 };
 120
 121 &pinctrl {
 122         state_default: pinctrl0 {
 123                 gpio {
 124                         ralink,group = "spi refclk", "rgmii1";
 125                         ralink,function = "gpio";
 126                 };
 127                 wdt {
 128                         ralink,group = "wdt";
 129                         ralink,function = "wdt refclk";
 130                 };
 131         };
 132 };
 133
 134 &ethernet {
 135         pinctrl-names = "default";
 136         pinctrl-0 = <&ephy_pins>;
 137         mtd-mac-address = <&factory 0x4>;
 138         mediatek,portmap = "llllw";
 139 };
 140
 141 &gsw {
 142         ralink,port4 = "ephy";
 143 };
 144
 145 &sdhci {
 146         status = "okay";
 147 };
 148
 149 &ehci {
 150         status = "okay";
 151 };
 152
 153 &ohci {
 154         status = "okay";
 155 };
 156
 157 &wmac {
 158         ralink,mtd-eeprom = <&factory 0>;
 159 };
 160
 161 &pcie {
 162         status = "okay";
 163 };