Fresh pull from upstream
[librecmc/librecmc.git] / target / linux / ramips / dts / ASL26555-16M.dts
1 /dts-v1/;
2
3 #include "rt3050.dtsi"
4
5 #include <dt-bindings/input/input.h>
6
7 / {
8         compatible = "ASL26555", "ralink,rt3050-soc";
9         model = "Alpha ASL26555 (16M)";
10
11         gpio-keys-polled {
12                 compatible = "gpio-keys-polled";
13                 #address-cells = <1>;
14                 #size-cells = <0>;
15                 poll-interval = <20>;
16
17                 reset {
18                         label = "reset";
19                         gpios = <&gpio0 10 0>;
20                         linux,code = <KEY_RESTART>;
21                 };
22
23                 wps {
24                         label = "wps";
25                         gpios = <&gpio0 12 0>;
26                         linux,code = <KEY_WPS_BUTTON>;
27                 };
28         };
29
30         gpio-leds {
31                 compatible = "gpio-leds";
32
33                 eth {
34                         label = "asl26555:green:eth";
35                         gpios = <&gpio0 0 1>;
36                 };
37
38                 wan-red {
39                         label = "asl26555:red:wan";
40                         gpios = <&gpio0 1 0>;
41                 };
42
43                 wan-green {
44                         label = "asl26555:green:wan";
45                         gpios = <&gpio0 2 0>;
46                 };
47
48                 wlan {
49                         label = "asl26555:green:wlan";
50                         gpios = <&gpio0 7 0>;
51                 };
52
53                 power-green {
54                         label = "asl26555:green:power";
55                         gpios = <&gpio0 8 0>;
56                 };
57
58                 power-red {
59                         label = "asl26555:red:power";
60                         gpios = <&gpio0 9 0>;
61                 };
62
63                 3g-green {
64                         label = "asl26555:green:3g";
65                         gpios = <&gpio0 14 1>;
66                 };
67
68                 3g-red {
69                         label = "asl26555:red:3g";
70                         gpios = <&gpio0 17 1>;
71                 };
72         };
73 };
74
75 &gpio0 {
76         status = "okay";
77 };
78
79 &spi0 {
80         status = "okay";
81
82         m25p80@0 {
83                 #address-cells = <1>;
84                 #size-cells = <1>;
85                 compatible = "jedec,spi-nor";
86                 reg = <0>;
87                 linux,modalias = "m25p80", "s25sl12801";
88                 spi-max-frequency = <10000000>;
89
90                 partition@0 {
91                         label = "uboot";
92                         reg = <0x0 0x30000>;
93                         read-only;
94                 };
95
96                 partition@30000 {
97                         label = "uboot-env";
98                         reg = <0x30000 0x10000>;
99                         read-only;
100                 };
101
102                 partition@40000 {
103                         label = "factory";
104                         reg = <0x40000 0x10000>;
105                         read-only;
106                 };
107
108                 partition@50000 {
109                         label = "firmware";
110                         reg = <0x50000 0xf80000>;
111                 };
112
113                 partition@fd0000 {
114                         label = "cert";
115                         reg = <0xfd0000 0x10000>;
116                         read-only;
117                 };
118
119                 partition@fe0000 {
120                         label = "langpack";
121                         reg = <0xfe0000 0x10000>;
122                         read-only;
123                 };
124
125                 devdata: partition@ff0000 {
126                         label = "devdata";
127                         reg = <0xff0000 0x10000>;
128                         read-only;
129                 };
130         };
131 };
132
133 &pinctrl {
134         state_default: pinctrl0 {
135                 gpio {
136                         ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
137                         ralink,function = "gpio";
138                 };
139         };
140 };
141
142 &ethernet {
143         mtd-mac-address = <&devdata 0x4004>;
144 };
145
146 &esw {
147         mediatek,portmap = <0x1e>;
148 };
149
150 &wmac {
151         ralink,mtd-eeprom = <&devdata 0x4000>;
152 };
153
154 &otg {
155         status = "okay";
156 };