target/linux/ramips/dts/ALL5002.dts

   1 /dts-v1/;
   2
   3 #include "rt3352.dtsi"
   4
   5 / {
   6         compatible = "ALL5002", "ralink,rt3352-soc";
   7         model = "Allnet ALL5002";
   8
   9         i2c-gpio {
  10                 #address-cells = <1>;
  11                 #size-cells = <0>;
  12
  13                 compatible = "i2c-gpio";
  14                 gpios = <&gpio0 1 0 &gpio0 2 0>;
  15                 i2c-gpio,delay-us = <10>;
  16
  17                 pcf0: iexp@38 {
  18                         #gpio-cells = <2>;
  19                         compatible = "inxp,pcf8574a";
  20                         reg = <0x38>;
  21                         gpio-controller;
  22                 };
  23
  24                 hwmon@4b {
  25                         compatible = "national,lm92";
  26                         reg = <0x4b>;
  27                 };
  28         };
  29
  30         gpio-leds {
  31                 compatible = "gpio-leds";
  32
  33                 ld1 {
  34                         label = "all5002:green:ld1";
  35                         gpios = <&pcf0 0 1>;
  36                 };
  37
  38                 ld2 {
  39                         label = "all5002:green:ld2";
  40                         gpios = <&pcf0 1 1>;
  41                 };
  42         };
  43 };
  44
  45 &gpio0 {
  46         status = "okay";
  47 };
  48
  49 &spi0 {
  50         status = "okay";
  51
  52         m25p80@0 {
  53                 #address-cells = <1>;
  54                 #size-cells = <1>;
  55                 compatible = "jedec,spi-nor";
  56                 reg = <0>;
  57                 linux,modalias = "m25p80", "mx25l25635e";
  58                 spi-max-frequency = <10000000>;
  59
  60                 partition@0 {
  61                         label = "u-boot";
  62                         reg = <0x0 0x30000>;
  63                         read-only;
  64                 };
  65
  66                 partition@30000 {
  67                         label = "u-boot-env";
  68                         reg = <0x30000 0x10000>;
  69                         read-only;
  70                 };
  71
  72                 factory: partition@40000 {
  73                         label = "factory";
  74                         reg = <0x40000 0x10000>;
  75                         read-only;
  76                 };
  77
  78                 partition@50000 {
  79                         label = "firmware";
  80                         reg = <0x50000 0x1fb0000>;
  81                 };
  82         };
  83 };
  84
  85 &pinctrl {
  86         state_default: pinctrl0 {
  87                 gpio {
  88                         ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
  89                         ralink,function = "gpio";
  90                 };
  91         };
  92 };
  93
  94 &ethernet {
  95         mtd-mac-address = <&factory 0x28>;
  96 };
  97
  98 &esw {
  99         mediatek,portmap = <0x3f>;
 100 };
 101
 102 &wmac {
 103         ralink,mtd-eeprom = <&factory 0>;
 104 };
 105
 106 &ehci {
 107         status = "okay";
 108 };
 109
 110 &ohci {
 111         status = "okay";
 112 };