target/linux/ramips/dts/3G-6200N.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "3G-6200N", "ralink,rt3050-soc";
   9         model = "Edimax 3g-6200n";
  10
  11         cfi@1f000000 {
  12                 compatible = "cfi-flash";
  13                 reg = <0x1f000000 0x800000>;
  14                 bank-width = <2>;
  15                 device-width = <2>;
  16                 #address-cells = <1>;
  17                 #size-cells = <1>;
  18
  19                 partition@0 {
  20                         label = "u-boot";
  21                         reg = <0x0 0x30000>;
  22                         read-only;
  23                 };
  24
  25                 partition@30000 {
  26                         label = "u-boot-env";
  27                         reg = <0x30000 0x10000>;
  28                         read-only;
  29                 };
  30
  31                 factory: partition@40000 {
  32                         label = "factory";
  33                         reg = <0x40000 0x10000>;
  34                         read-only;
  35                 };
  36
  37                 partition@3e0000 {
  38                         label = "cimage";
  39                         reg = <0x3e0000 0x20000>;
  40                         read-only;
  41                 };
  42
  43                 partition@50000 {
  44                         label = "firmware";
  45                         reg = <0x50000 0x390000>;
  46                 };
  47         };
  48
  49         gpio-leds {
  50                 compatible = "gpio-leds";
  51
  52                 power {
  53                         label = "3g-6200n:green:power";
  54                         gpios = <&gpio0 9 1>;
  55                 };
  56
  57                 wlan {
  58                         label = "3g-6200n:amber:wlan";
  59                         gpios = <&gpio0 14 1>;
  60                 };
  61
  62                 3g {
  63                         label = "3g-6200n:blue:3g";
  64                         gpios = <&gpio0 7 1>;
  65                 };
  66         };
  67
  68         gpio-keys-polled {
  69                 compatible = "gpio-keys-polled";
  70                 #address-cells = <1>;
  71                 #size-cells = <0>;
  72                 poll-interval = <20>;
  73
  74                 reset {
  75                         label = "reset";
  76                         gpios = <&gpio0 12 1>;
  77                         linux,code = <KEY_RESTART>;
  78                 };
  79
  80                 rfkill {
  81                         label = "wlanswitch";
  82                         gpios = <&gpio0 13 1>;
  83                         linux,code = <KEY_RFKILL>;
  84                 };
  85         };
  86 };
  87
  88 &pinctrl {
  89         state_default: pinctrl0 {
  90                 gpio {
  91                         ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  92                         ralink,function = "gpio";
  93                 };
  94         };
  95 };
  96
  97 &ethernet {
  98         mtd-mac-address = <&factory 0x4>;
  99 };
 100
 101 &esw {
 102         mediatek,portmap = <0x2f>;
 103 };
 104
 105 &wmac {
 106         ralink,mtd-eeprom = <&factory 0>;
 107 };
 108
 109 &otg {
 110         status = "okay";
 111 };