Fresh pull from upstream
[librecmc/librecmc.git] / package / network / services / openvpn / files / openvpn.init
1 #!/bin/sh /etc/rc.common
2 # Copyright (C) 2008-2013 OpenWrt.org
3 # Copyright (C) 2008 Jo-Philipp Wich
4 # This is free software, licensed under the GNU General Public License v2.
5 # See /LICENSE for more information.
6
7 START=90
8 STOP=10
9
10 USE_PROCD=1
11 PROG=/usr/sbin/openvpn
12
13 LIST_SEP="
14 "
15
16 UCI_STARTED=
17 UCI_DISABLED=
18
19 append_param() {
20         local s="$1"
21         local v="$2"
22         case "$v" in
23                 *_*_*_*) v=${v%%_*}-${v#*_}; v=${v%%_*}-${v#*_}; v=${v%%_*}-${v#*_} ;;
24                 *_*_*)   v=${v%%_*}-${v#*_}; v=${v%%_*}-${v#*_} ;;
25                 *_*)     v=${v%%_*}-${v#*_} ;;
26         esac
27         echo -n "$v" >> "/var/etc/openvpn-$s.conf"
28         return 0
29 }
30
31 append_bools() {
32         local p; local v; local s="$1"; shift
33         for p in $*; do
34                 config_get_bool v "$s" "$p"
35                 [ "$v" = 1 ] && append_param "$s" "$p" && echo >> "/var/etc/openvpn-$s.conf"
36         done
37 }
38
39 append_params() {
40         local p; local v; local s="$1"; shift
41         for p in $*; do
42                 config_get v "$s" "$p"
43                 IFS="$LIST_SEP"
44                 for v in $v; do
45                         [ -n "$v" ] && [ "$p" != "push" ] && append_param "$s" "$p" && echo " $v" >> "/var/etc/openvpn-$s.conf"
46                         [ -n "$v" ] && [ "$p" == "push" ] && append_param "$s" "$p" && echo " \"$v\"" >> "/var/etc/openvpn-$s.conf"
47                 done
48                 unset IFS
49         done
50 }
51
52 section_enabled() {
53         config_get_bool enable  "$1" 'enable'  0
54         config_get_bool enabled "$1" 'enabled' 0
55         [ $enable -gt 0 ] || [ $enabled -gt 0 ]
56 }
57
58 openvpn_add_instance() {
59         local name="$1"
60         local dir="$2"
61         local conf="$3"
62
63         procd_open_instance
64         procd_set_param command "$PROG" \
65                 --syslog "openvpn($name)" \
66                 --status "/var/run/openvpn.$name.status" \
67                 --cd "$dir" \
68                 --config "$conf"
69         procd_set_param file "$dir/$conf"
70         procd_set_param respawn
71         procd_close_instance
72 }
73
74 start_instance() {
75         local s="$1"
76
77         config_get config "$s" config
78         config="${config:+$(readlink -f "$config")}"
79
80         section_enabled "$s" || {
81                 append UCI_DISABLED "$config" "$LIST_SEP"
82                 return 1
83         }
84
85         [ ! -d "/var/run" ] && mkdir -p "/var/run"
86
87         if [ ! -z "$config" ]; then
88                 append UCI_STARTED "$config" "$LIST_SEP"
89                 openvpn_add_instance "$s" "${config%/*}" "$config"
90                 return
91         fi
92
93         [ ! -d "/var/etc" ] && mkdir -p "/var/etc"
94         [ -f "/var/etc/openvpn-$s.conf" ] && rm "/var/etc/openvpn-$s.conf"
95
96         # append flags
97         append_bools "$s" \
98                 auth_nocache auth_user_pass_optional bind ccd_exclusive client client_cert_not_required \
99                 client_to_client comp_noadapt disable \
100                 disable_occ down_pre duplicate_cn fast_io float http_proxy_retry \
101                 ifconfig_noexec ifconfig_nowarn ifconfig_pool_linear management_forget_disconnect management_hold \
102                 management_query_passwords management_signal mktun mlock mtu_test multihome mute_replay_warnings \
103                 nobind no_iv no_name_remapping no_replay opt_verify passtos persist_key persist_local_ip \
104                 persist_remote_ip persist_tun ping_timer_rem pull push_reset \
105                 remote_random rmtun route_noexec route_nopull single_session socks_proxy_retry \
106                 suppress_timestamps tcp_nodelay test_crypto tls_client tls_exit tls_server \
107                 tun_ipv6 up_delay up_restart username_as_common_name
108
109         # append params
110         append_params "$s" \
111                 cd askpass auth auth_retry auth_user_pass auth_user_pass_verify bcast_buffers ca cert capath \
112                 chroot cipher client_config_dir client_connect client_disconnect comp_lzo connect_freq \
113                 connect_retry connect_timeout connect_retry_max crl_verify dev dev_node dev_type dh \
114                 echo engine explicit_exit_notify fragment group hand_window hash_size \
115                 http_proxy http_proxy_option http_proxy_timeout ifconfig ifconfig_pool \
116                 ifconfig_pool_persist ifconfig_push inactive ipchange iroute keepalive \
117                 key key_method keysize learn_address link_mtu lladdr local log log_append \
118                 lport management management_log_cache max_clients \
119                 max_routes_per_client mode mssfix mtu_disc mute nice ns_cert_type ping \
120                 ping_exit ping_restart pkcs12 plugin port port_share prng proto rcvbuf \
121                 redirect_gateway remap_usr1 remote remote_cert_eku remote_cert_ku remote_cert_tls \
122                 reneg_bytes reneg_pkts reneg_sec \
123                 replay_persist replay_window resolv_retry route route_delay route_gateway \
124                 route_metric route_pre_down route_up rport script_security secret server server_bridge setenv shaper sndbuf \
125                 socks_proxy status status_version syslog tcp_queue_limit tls_auth tls_version_min \
126                 tls_cipher tls_remote tls_timeout tls_verify tmp_dir topology tran_window \
127                 tun_mtu tun_mtu_extra txqueuelen user verb down push up \
128                 verify_x509_name x509_username_field \
129                 ifconfig_ipv6 route_ipv6 server_ipv6 ifconfig_ipv6_pool ifconfig_ipv6_push iroute_ipv6
130
131         openvpn_add_instance "$s" "/var/etc" "openvpn-$s.conf"
132 }
133
134 start_service() {
135         config_load 'openvpn'
136         config_foreach start_instance 'openvpn'
137
138         local path name
139         for path in /etc/openvpn/*.conf; do
140                 if [ -f "$path" ]; then
141                         name="${path##*/}"; name="${name%.conf}"
142
143                         # don't start configs again that are already started by uci
144                         if echo "$UCI_STARTED" | grep -qxF "$path"; then
145                                 continue
146
147                         # don't start configs which are set to disabled in uci
148                         elif echo "$UCI_DISABLED" | grep -qxF "$path"; then
149                                 logger -t openvpn "$name.conf is disabled in /etc/config/openvpn"
150                                 continue
151                         fi
152
153                         openvpn_add_instance "$name" "${path%/*}" "$path"
154                 fi
155         done
156 }
157
158 service_triggers() {
159         procd_add_reload_trigger openvpn
160 }