package/kernel/mac80211/patches/subsys/360-mac80211-when-using-iTXQ-select-the-queue-in-ieee802.patch

   1 From: Felix Fietkau <nbd@nbd.name>
   2 Date: Fri, 22 Mar 2019 18:06:03 +0100
   3 Subject: [PATCH] mac80211: when using iTXQ, select the queue in
   4  ieee80211_subif_start_xmit
   5
   6 When using iTXQ, the network stack does not need the real queue number, since
   7 mac80211 is using its internal queues anyway. In that case we can defer
   8 selecting the queue and remove a redundant station lookup in the tx path to save
   9 some CPU cycles.
  10
  11 Signed-off-by: Felix Fietkau <nbd@nbd.name>
  12 ---
  13
  14 --- a/net/mac80211/tx.c
  15 +++ b/net/mac80211/tx.c
  16 @@ -3793,6 +3793,7 @@ void __ieee80211_subif_start_xmit(struct
  17                                   u32 ctrl_flags)
  18  {
  19         struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
  20 +       struct ieee80211_local *local = sdata->local;
  21         struct sta_info *sta;
  22         struct sk_buff *next;
  23
  24 @@ -3806,7 +3807,15 @@ void __ieee80211_subif_start_xmit(struct
  25         if (ieee80211_lookup_ra_sta(sdata, skb, &sta))
  26                 goto out_free;
  27
  28 -       if (!IS_ERR_OR_NULL(sta)) {
  29 +       if (IS_ERR(sta))
  30 +               sta = NULL;
  31 +
  32 +       if (local->ops->wake_tx_queue) {
  33 +               u16 queue = __ieee80211_select_queue(sdata, sta, skb);
  34 +               skb_set_queue_mapping(skb, queue);
  35 +       }
  36 +
  37 +       if (sta) {
  38                 struct ieee80211_fast_tx *fast_tx;
  39
  40                 /* We need a bit of data queued to build aggregates properly, so
  41 --- a/net/mac80211/wme.c
  42 +++ b/net/mac80211/wme.c
  43 @@ -141,6 +141,42 @@ u16 ieee80211_select_queue_80211(struct
  44         return ieee80211_downgrade_queue(sdata, NULL, skb);
  45  }
  46
  47 +u16 __ieee80211_select_queue(struct ieee80211_sub_if_data *sdata,
  48 +                            struct sta_info *sta, struct sk_buff *skb)
  49 +{
  50 +       struct mac80211_qos_map *qos_map;
  51 +       bool qos;
  52 +
  53 +       /* all mesh/ocb stations are required to support WME */
  54 +       if (sdata->vif.type == NL80211_IFTYPE_MESH_POINT ||
  55 +           sdata->vif.type == NL80211_IFTYPE_OCB)
  56 +               qos = true;
  57 +       else if (sta)
  58 +               qos = sta->sta.wme;
  59 +       else
  60 +               qos = false;
  61 +
  62 +       if (!qos) {
  63 +               skb->priority = 0; /* required for correct WPA/11i MIC */
  64 +               return IEEE80211_AC_BE;
  65 +       }
  66 +
  67 +       if (skb->protocol == sdata->control_port_protocol) {
  68 +               skb->priority = 7;
  69 +               goto downgrade;
  70 +       }
  71 +
  72 +       /* use the data classifier to determine what 802.1d tag the
  73 +        * data frame has */
  74 +       qos_map = rcu_dereference(sdata->qos_map);
  75 +       skb->priority = cfg80211_classify8021d(skb, qos_map ?
  76 +                                              &qos_map->qos_map : NULL);
  77 +
  78 + downgrade:
  79 +       return ieee80211_downgrade_queue(sdata, sta, skb);
  80 +}
  81 +
  82 +
  83  /* Indicate which queue to use. */
  84  u16 ieee80211_select_queue(struct ieee80211_sub_if_data *sdata,
  85                            struct sk_buff *skb)
  86 @@ -148,10 +184,12 @@ u16 ieee80211_select_queue(struct ieee80
  87         struct ieee80211_local *local = sdata->local;
  88         struct sta_info *sta = NULL;
  89         const u8 *ra = NULL;
  90 -       bool qos = false;
  91 -       struct mac80211_qos_map *qos_map;
  92         u16 ret;
  93
  94 +       /* when using iTXQ, we can do this later */
  95 +       if (local->ops->wake_tx_queue)
  96 +               return 0;
  97 +
  98         if (local->hw.queues < IEEE80211_NUM_ACS || skb->len < 6) {
  99                 skb->priority = 0; /* required for correct WPA/11i MIC */
 100                 return 0;
 101 @@ -161,10 +199,8 @@ u16 ieee80211_select_queue(struct ieee80
 102         switch (sdata->vif.type) {
 103         case NL80211_IFTYPE_AP_VLAN:
 104                 sta = rcu_dereference(sdata->u.vlan.sta);
 105 -               if (sta) {
 106 -                       qos = sta->sta.wme;
 107 +               if (sta)
 108                         break;
 109 -               }
 110                 /* fall through */
 111         case NL80211_IFTYPE_AP:
 112                 ra = skb->data;
 113 @@ -172,56 +208,26 @@ u16 ieee80211_select_queue(struct ieee80
 114         case NL80211_IFTYPE_WDS:
 115                 ra = sdata->u.wds.remote_addr;
 116                 break;
 117 -#ifdef CPTCFG_MAC80211_MESH
 118 -       case NL80211_IFTYPE_MESH_POINT:
 119 -               qos = true;
 120 -               break;
 121 -#endif
 122         case NL80211_IFTYPE_STATION:
 123                 /* might be a TDLS station */
 124                 sta = sta_info_get(sdata, skb->data);
 125                 if (sta)
 126 -                       qos = sta->sta.wme;
 127 +                       break;
 128
 129                 ra = sdata->u.mgd.bssid;
 130                 break;
 131         case NL80211_IFTYPE_ADHOC:
 132                 ra = skb->data;
 133                 break;
 134 -       case NL80211_IFTYPE_OCB:
 135 -               /* all stations are required to support WME */
 136 -               qos = true;
 137 -               break;
 138         default:
 139                 break;
 140         }
 141
 142 -       if (!sta && ra && !is_multicast_ether_addr(ra)) {
 143 +       if (!sta && ra && !is_multicast_ether_addr(ra))
 144                 sta = sta_info_get(sdata, ra);
 145 -               if (sta)
 146 -                       qos = sta->sta.wme;
 147 -       }
 148
 149 -       if (!qos) {
 150 -               skb->priority = 0; /* required for correct WPA/11i MIC */
 151 -               ret = IEEE80211_AC_BE;
 152 -               goto out;
 153 -       }
 154 +       ret = __ieee80211_select_queue(sdata, sta, skb);
 155
 156 -       if (skb->protocol == sdata->control_port_protocol) {
 157 -               skb->priority = 7;
 158 -               goto downgrade;
 159 -       }
 160 -
 161 -       /* use the data classifier to determine what 802.1d tag the
 162 -        * data frame has */
 163 -       qos_map = rcu_dereference(sdata->qos_map);
 164 -       skb->priority = cfg80211_classify8021d(skb, qos_map ?
 165 -                                              &qos_map->qos_map : NULL);
 166 -
 167 - downgrade:
 168 -       ret = ieee80211_downgrade_queue(sdata, sta, skb);
 169 - out:
 170         rcu_read_unlock();
 171         return ret;
 172  }
 173 --- a/net/mac80211/wme.h
 174 +++ b/net/mac80211/wme.h
 175 @@ -16,6 +16,8 @@
 176  u16 ieee80211_select_queue_80211(struct ieee80211_sub_if_data *sdata,
 177                                  struct sk_buff *skb,
 178                                  struct ieee80211_hdr *hdr);
 179 +u16 __ieee80211_select_queue(struct ieee80211_sub_if_data *sdata,
 180 +                            struct sta_info *sta, struct sk_buff *skb);
 181  u16 ieee80211_select_queue(struct ieee80211_sub_if_data *sdata,
 182                            struct sk_buff *skb);
 183  void ieee80211_set_qos_hdr(struct ieee80211_sub_if_data *sdata,